Possible to use scanner over network (without sane server)?

Hi,
I'm completely new to the subject of printers and scanners.
My configuration is the following: I got a HP OfficeJet 6500 in the basement, which is connected to a network switch, which my laptop (and a router and several other computers) is connected to.
Thanks to CUPS, printing is no problem. I got it to work within no more than 10 minutes (YEAH! I bet no Windows user could have done that faster and easier!)
Now I'm trying to get the scanner function to work.
My question is this: is it possible to use that scanner in the basement with my laptop and NO ADDITIONAL sane server directly connected to it?
Do I need a scan server which is DIRECTLY connected to the scanner (e.g. via USB)?
The only information I found on that topic was how to access a working scan server over the network, but this is NOT what I want to do.
Thanks for helping me with this.
Edgar
Last edited by EdgarButan (2010-05-02 14:13:43)

Thanks, I didn't think so... but a misinformed sales rep suggested it was.
If I just want to tie CUCM and Lync together, do I need anything special (UC Integration for Lync?) or is it possible to do it with just a SIP interface?

Similar Messages

Is it possible to use wi-fi networks without NWAM in Solaris 11 Express?

Hello,
I have disabled NWAM in Solaris 11 Express and now I'm trying to set up a wi-fi connection with dladm and ipadm only.
I reached a point where all seems well configured and I can even ping my on dhcp leased address.
But I can't ping the default gateway, for example.
I get something such as "Network unreachable".
This is in spite of "netstat -rn" shows a reasonable route.
Thanks in advance,
Carlos.

When I have it disabled I'm not being able to ping other addresses but my own.
I don't know if I'm doing something wrong or if nwam is doing something else under the hood when it's enabled.
Regards,
Carlos.

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

iCloud requires OS X 10.7.2.

How do I use my wireless Led TV as a second monitor using my home network without any cables? Both of them are connected to home network

How do I use my wireless Led TV as a second monitor to my mac book pro using my home network without any cables? Both of them are connected to home network

Having a gateway there is not going to be a problem. We just need to configure the Time Capsule correctly to work with the 2Wire.
You will need one ethernet cable to connect the 2Wire to the Time Capsule and a second ethernet cable to temporarily connect your computer to the Time Capsule so that it can be configured.
The 2Wire you have now should already be broadcasting a wireless network, so once you have the Time Capsule setup, you will actually have two wireless networks there.
Here's how to configure the Time Capsule to work with the 2Wire:
Connect an ethernet cable from one of the LAN <-> ports on the 2Wire to the WAN (circle icon) port on the Time Capsule.
Connect another ethernet cable temporarily from your computer to one of the LAN <-> ports on the Time Capsule
Open Hard Drive > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Base Station tab below the row of icons to assign a name for the Time Capsule, a device password (write this down) and adjust time zone settings
Click the Wireless tab below the row of icons
Wireless Mode....Create a wireless network
Wireless Network Name....Your choice
Radio Mode....Automatic
Channel...Automatic
Wireless Security...WPA/WPA2 Personal
Wireless Password....Your choice (write this down)
Check mark next to....Remember password in keychain
Click the Internet icon
At the bottom, change the setting for Connection Sharing to "Off (Bridge Mode)"
Click Update at the lower right and the Time Capsule will restart after 20-25 seconds and you should get the green light.
You should now be able to connect to your Time Capsule wireless network.
I'm not clear on whether you have tried to setup the Time Capsule to backup your computer. Post back if you need some info on that. We may need to start another thread for that as that will be a different subject.

If I am buying single app adobe premier pro by annual prepaid plan,after the after the end of the year subscription would it be possible to use the program further without updating or I should pay each year?

If I am buying single app adobe premier pro by annual prepaid plan,after the after the end of the year subscription would it be possible to use the program further without updating or I should pay each year?

Thanks
2 бер. 2015 15:50, користувач "Peru Bob" <[email protected]> написав:
If I am buying single app adobe premier pro by annual prepaid
plan,after the after the end of the year subscription would it be possible
to use the program further without updating or I should pay each year?
created by Peru Bob <https://forums.adobe.com/people/Peru+Bob> in *Premiere
Pro* - View the full discussion
<https://forums.adobe.com/message/7243337#7243337>

Is it possible to use some product on the unix server at the development level which would make it p

Hello,
We are generating editable PDF forms from the scratch at the development level on the unix server. Is it possible to use some product on the unix server at the development level which would make it possible to save these editable PDF forms to be saved using acrobat reader? These forms are used by the end users and the edited files are then saved... Kindly help me in this regard..
Best Regards,
Deepak

Dear Aandi,
I am really thankful to you for this. I will suggest this to the business and then they can contact adobe for this. Thanking you once again for providing me with all the valueable info. You have been instrumental in helping me out in my project.
Best Regards,
Deepak Goyal

When using a personal dropbox account, is it possible to use the mapped drive without downloading all my dropbox files to my hard drive as well?

When using a personal (not business) dropbox account on my mac book pro, is it possible to use the mapped drive only? Currently I have dropbox mapped to my computer but it is also saving a redundant copy of the data on my hard drive. My goal is to pull, edit and save files on the mapped drive only without having a redundant back up of all my dropbox files on my computer wasting valuable storage space. Any advice out there? Thanks in advance for your help!

I don't believe that is accurate, but maybe I am missing something (I am not a Windows user).
Looking at 2 explanation of how to map a Dropbox as a drive…
http://lkeng.org/wp/?p=147
https://www.youtube.com/watch?v=5d8uvseVr5A
Both of those are linking to the 'local copy' of Dropbox. It is not a true 'network' drive as far as I can see (it still requires the local copy on the PC).
Another video suggests using another service to mount the Dropbox, but that is not using Dropbox anymore, it is going through Otixo…
https://www.youtube.com/watch?v=FAIpm2qmglU
Dropbox does not provide easy to use URL's to mount as a network disk so I don't think this is possible on OS X.
Dropbox's forum has this too…
https://www.dropboxforum.com/hc/communities/public/questions/202133795-How-to-ma p-dropbox-as-a-network-drive-on-Mac?loca…
You may need to examine the Windows computers carefully - if they have Dropbox installed & running then all the files are stored on the local machine in addition to the 'mapped drive'.
It looks to me like people are 'redirecting' the local copy to appear like a remote disk just so they can address that path on other machines - each PC is being setup the same. You could create aliases on OS X, but it doesn't help move files off the machine.
Hopefully someone else will contradict me, but I don't think this is how Dropbox works.

Is there possibility to use the front panel without installing Labview?

Hallo,
i have two small questions:
1- Is it possible to use the front panel of a labview software without needing to install Labview itself? i mean something similar to the "power point viewer" which can view the Power Point files without installing the microsoft office.
2- In an intensity Graph, how can one change the color?
thanks.
Solved!
Go to Solution.

Hi,
Regarding your questions
1)You need to have Labview and Application builder installed on your machine. If you have that you can make an stand alone application (EXE) and then you can deploy it on systems that does not have LabView and can view it, However you will not be able to see the block diagram.
Here is a link that explains how to do so
http://zone.ni.com/reference/en-XX/help/371361A-01/lvhowto/exe_ex/
2) You can either do it by using propery node or marker method. The following link explains it
http://digital.ni.com/public.nsf/allkb/1ADFF221E27F5B5886256E6F007C7B58?OpenDocument
Hope it helps.
Regards,
Fawad
Fawad Nisar
Applications Engineer
National Instruments UK & Ireland

Is it possible to use LiveCycle ES APIs without deploying ?

Hi.,
Is it possible to use LiveCycle ES APIs (like form flattening) without deploying it in any application server.
Can live cycle ES only be used with a server ?
Thnks.,

No. Adobe LiveCycle ES services must be run in one of the supported J2EE Application Servers.

Is it possible to use Powershell to determine if Windows Server Source Files are present on disk?

Hi everyone,
I would like to know if it is possible to use a Powershell cmdlet to determine if Windows Server 2012 (R2) Source Files are present on disk.
We are using an automated PS script to install roles and features and some registry keys and applications afterwards. If the Source Files are not present, the script will fail, so I would like a# Check if Source Files are present # stage built in
the script to determine if the source files are present or that an alternate source path needs to be used.
Is this possible with Powershell and if so, how can we achieve this?
I'll appreciate your answer.
- Rob

Hi Rob,
I assume that you are using powershell command "install-windowsfeature" .
I would suggest you add the parameter "-source" to specify the alternate path of thesource file .
" The path specified in this parameter is only used if the command cannot find feature files in the local side-by-side store of the specified target computer or VHD. "
For details please refer to the article below :
https://technet.microsoft.com/en-us/library/jj205467(v=wps.620).aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

ARD Client Doesn't Show When Using Scanner and Network Range

All-
When I use the Scanner in ARD3 to scan a remote Network Range over the internet, the ARD client that I KNOW EXISTS in that same IP range DOES NOT show up (other ARD clients that I'm not interested in do show up, but not the specific ARD client I need to observe/control).
If I then call the user at the remote ARD client on the telephone, and have them give me their IP address (using www.whatismyip.com, for example), I can use the Scanner in ARD3 to "find" the ARD client and add it to my All Computers list. Process: change the popup box to read "Network Address" instead of "Network Range" and set the IP address field to the address provided by the user.
Why doesn't the remote ARD client show up when I scan for it using a Network Range in ARD3? Obviously, I don't want to have to call up each user every time I need to perform maintenance/control a client to get their (dynamic) IP address.
I could use dynamic DNS, but that's overkill. If I know (from experience) that my ARD clients are in IP ranges X, Y, and Z, then I SHOULD be able to simply scan for them (or so I thought).
Any help appreceated.

Updated to ARD3.1 (admin and clients), but that did not solve the issue.
Let me try to restate the problem:
The ARD client is out of state/across the country (i.e., different sub-net) using a dynamically assigned IP adddress. I can (for now) connect to that ARD client successfully, and perform all ARD functions (that I've tried so far) becasue I know (for now) that client's IP address (I called and spoke with the user who used www.whatismyip.com to give me their IP address). So what's the problem, you ask?
Some time in the future, that same ARD client will have a new, dynamically assigned IP address. I'd like to be able to connect to that client without having to call on the telephone and ask the user what IP address they have been assigned now.
My thinking was that I could make a pretty good guess at their IP address (based on their old IP address, and the way Cable and Telco ISPs allocate/lease IP addresses). For example, if their current dynamic IP address is 999.888.777.45, I could guess that a subsequent dynamically assigned IP address would be in the range 999.888.777.2 to 999.888.777.255. With ARD, I could simply scan that range of network addresses using the Scanner and quickly find the ARD client I want.
I tried to do just that, and the ARD scanner did not find my client when I scanned the network range that the ARD client was actually in. It showed other ARD clients (that I do not administer, own, or want to hack into), but not the one I do want to observe/control/maintain (and have a legal right to). Somewhat paradoxically, when I used the Scanner to find the same ARD client by specific IP address, there was no problem.
Why doesn't the ARD Scanner "see" the ARD client when scanning the network range?

Image Capture not detecting Scanner over Network

I have an Epson Workforce 610 which is installed as a network printer (wired ethernet) in my Home Office. OSX Mavericks will find and load the ppropriate drivers for the printer, and printing is fine. However Image Capture does not show the scanner portion in its window. Devices read as (0).
If I connect via USB cable the Scanner shows up with no problem. Disconnect USB no scanner.
Has anyone got a workforce 610 successfully scanning over ethernet?
Thank,
Douglas McLean

DougMcLean wrote:
The problem occurs when trying to use it via the network connection, at which point the printer shows up only as a printer. and can't be "added" as a scanner.
Doug
On the network computer, does System Preferences save it as a Shared Printer?
The reason I ask is that I can't.
I can select and save as follows:
But when I re-open System Preferences, the system has de-selected it:

Is it possible to use Airplay on AppleTV without a TV?

Hi everyone,
I had an apple airport and was able to play pandora through it just using my iphone 4s and stereo system (an old boombox that takes a regular 3.5 mm plug). I got rid of my Airport and got an AppleTV under the impression I could use the airplay function in the same way I used the Airport. I was wrong. Is there anyway to use the airplay function using the AppleTV without a TV? I have the proper optical cables and converter to adapt it to my boombox, I know this because I can hear apple tv requesting me to use the voice command over my boombox speakers. I currently do not have a TV. I plan on buying one in the next 6 months. Please help.
Thank you

I can confirm that Airplay with Apple TV3 does NOT mute the audio even when the HDMI out isn't connected to a TV. As I said, however, you need a TV to do the initial setup. After that, you can disconnect from the TV and connect (or leave connected) the optical out to the receiver.
vazandrew is not completely off base, however. Some time ago, there was a version of ATV firmware that had a bug which caused that problem. I think the version was 4.22. AFAIK, ATV3 firmware is now up to 7.x.
If you still run into a problem, you may need to factory reset your ATV3 (including firmware update), then rerun the initial setup with TV attached.
Good luck.

HT201335 Is it possible to use air play mirroring without an Apple TV?

Trying to find out if it's possible to do the air play mirroring with a regular HDTV? If so are there any accessories needed?

You can use this with HDMI cable.
http://store.apple.com/sg/product/MD098ZM/A/apple-digital-av-adapter

Is is possible to use the iMac g3 without a mouse

Have a iMac g3 and wanted to know if I can access anything without a mouse, until I can find an original one.
Thank you

Or you can use the up and down and sideways arrows to navigate through windows. If you go to System Preferences>Keyboard>keyboard shortcuts, you'll find a long list of actions you can perform without a mouse.

Possible to use scanner over network (without sane server)?

Similar Messages

Maybe you are looking for