Possible update solution for some Jelly Bean issues on Razr Maxx

I bought a Razr Maxx used two weeks ago and wanted to a post a possible solution to the broken Jelly Bean update. My Razr Maxx (practically new) was slow, lagged, and gave me about 10 hours of battery life. Also, my Wi-Fi was horrible just 10 feet from the wireless router and it ran hot.
Before I chucked it for a used S3 I decided to do what others had done. Keep in mind, the phone had been previously factory reset after the JB update had been OTA'ed to the unit a few months ago. It was put in a drawer as the person bought a new phone.
So to be clear: It had gone through a factory reset but without clearing internal memory and had serious issues. I had cleared the Dalvik cache but it didn't help. Here's what fixed my phone:
I did a battery recalibration. This can be done by running the phone down to zero. Shutting it off and charging it overnight. This may have to be performed twice.
Backed up my files, removed the mSD card and from the OS, erased the internal storage. I also went into the Settings / Privacy and set Automatic Restore to off.
I cleared the Dalvik Cache again.
http://www.droidforums.net/forum/droid-razr-maxx/232462-how-wipe-cache-without-doing-factory-reset.html
I booted into safe mode.
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=50079
From the OS within safe mode, I performed a factory reset and had it clear the internal storage again.
Started the setup process.
Cleared Dalvik Cache again.
The result is a smooth "buttery" feel (well, as smooth as this platform can offer) no massive lagging like before where the phone would just lock up for five seconds, no over heating, WiFi is seemingly normal and battery life is Maxx instead of Min. To give you an idea, the phone had been on light use and on for maybe 13 on battery when I did the reset. I did the hard reset from a 65% battery and reinstalled all the apps over WiFi and reconfigured. At 2:30 a.m. it was at 1 percent so I set the screen to 100% brightness and played a video until it died about 3 a.m. Basically the screen was on and the phone being used from around 9 p.m. until 3 a.m. after coming off the charger at 8 a.m. the previous morning.
Will this work for you? I don't know but I know the Jelly Bean in place upgrade on this phone is pretty flaky from the complaints.
If your phone has been turned into a pile of junk by the update, you have nothing left to lose unless you're just using it as a bargaining chit to get a new phone from VZW.
Good luck to anyone who tries it.
If you are trying to diagnose battery issues, I recommend GSAM.

>> Duplicate post removed for cross-posting violations per the Verizon Wireless Terms of Service
See After latest system update, text messages don't always "send." for original message <<
Message was edited by: Verizon Moderator

Similar Messages

Jelly Bean Issues - Phone Replaced??

Hey all!
I was caught up in the "oops" OTA of Jelly Bean on my Razr MAXX (around Christmas). I do NOT like the update. Battery life is less and several apps do not work as well, if at all. In surfing the 'net, there have been a few cases of people taking their phone into a Corporate Store and having it replaced with an ICS version. Anyone heard of this? Done this? Anyone from Verizon want to chime in?
Thanks so much!
Michael

ArnettH_VZW,
Did you all figure this out? This has happened to me at least 10 times in the past 2 months. I just got this phone in March of 2013. I hate waking up and finding my phone at the 4gLTE screen!!! Here is what I have been doing to troubleshoot it:
1.) Bought a new SanDisc 32GB card which they said will now be compatible with this phone. I haven't received the card yet and the phone still crashed so that is not the issue.
2.) Bought a new battery. It still locked up.
3.) Had Verizon give me a new Sim card. It still locked up.
4.) Used the phone without the memory card. It still locked up.
5.) Wiped the phone and only put Facebook & LinkedIn on the phone. It still locked up.
6.) Called Verizon and complained 3 times, each time I got a new phone (they were very accommodating). It's not the phone. It still locked up.
My wife has the EXACT same phone. We got it on the same day. Her's works fine. I really just don't get this. I have done everything possible to my knowledge and still the phone locks up. I have not rooted or messed with any of the developer options on the phone.
How does a phone randomly lock up on the 4G LTE screen when the phone has NOTHING on it! It's very hard to troubleshoot when the phone does this on it's own with no user action. Verizon doesn't even know how this is happening?
Could this be my gmail account? Could it be the auto-backup on the phone? I REALLY don't get it!
Any new thoughts on this????? No one can help me!

Jelly bean issue?

i just updated my nexus to jelly bean (finally) but now when i get a call my phone don't ring ? any fix?

Hi Solis80,
Oh my! Sorry to hear about your issues with the device after the software update. I definitely want to get this issue resolved for you. Please try removing the back cover, battery and the sim card for about one minute. If this does not resolve your issue, we would need to complete a hard reset. http://bit.ly/swCYZF.
Thanks,
NidiaA_VZW
Please follow us on Twitter @VZWSUPPORT

My ipod touch(4th gen) just recently had the iOS 5 update.bu for some reason about 80% of my music collection appears with no album artwork and doesnt play any songs.basically it has my music on their but wont let me access it? please help!

My ipod touch(4th gen) just recently had the iOS 5 update.bu for some reason about 80% of my music collection appears with no album artwork and doesnt play any songs.basically it has my music on their but wont let me access it? please help!

i have the same problem but i have ios 5.01. how do you unsync? please help, thanks

RG1 register register updation prob for some of the deivery docs.

Dear All,
While updating the RG1 register for classification type IDH,
on simulation system is giving red signal for some of the documents.
Can any one pur some light on this issue.And guide me what i have to do?
I like knwo for which movement type which classification we have to used.
The issue issue is very urgent as we have to submit the register with the excise department.
Thanks in advance.
deepti

Hi shyam,
Did you got the answer for your question if so please tell me the solution since i am also facing same problem.
thanks
Srinivas

Solution For Anyone Having Voicemail Issues

Not long after activating my iPhone 5 with Verizon, my visual voicemail stopped working. In addition, I was not even receiveing notifications when I had voicemail. The only way for me to check and/or listen to voicemail was to do it the old fashioned way by dialing *86.
Verizon technical support had me check and recheck every setting on the phone but noting fixed the issue. I was told that one of the possible causes could be a specific app. "Onavo Extend". It's an app that is supposed to "stretch" your data plan and also lets you track how much data each specifc app uses.
After deleting the app, I was still unable to access visual voicemail. After a little more playing around, I found that deleting the app does not remove the profile that it installed on the phone. You need to manually remove the profile (Under Settings / General / Profiles). After removing the profile I reset the phone (Hold the power and home button at the same time until the phone shuts off) and everything worked fine.....my visual voicemail was back.
You may need to remove the profile more than once. For some reason after removing the profile the first time and restarting the phone, he profile reappeared.
Hope this helps!

First time I read about this - I've been having the VVM issues since upgrading to iPhone 5. I like Onavo to help limit my data, so for now I'm downloaded the YouMail app )which may even be working better than native vvm?).

Background job not updating data for some steps of program

We have created a custom program and submitting the standard program RPRCCC_READ_KR1025
which is used for conversion of AMEX credit card files.
Since this program can update data for 1 company id at a time,we have created a background job
for that program with 10 steps and 10 variants of data related to 10 different company codes.
when this job is executed it is not updating data for all the 10 files , sometimes it updates 5,7,etc...
If we execute the other files which didnt update in job manually they are getting updated.
All the files executed with that program can be seen in PRTA transaction.
Regards,
Gautham.
Edit: Solved.
Since the standard program updates the database every time with commit work
there should be some time until the next database update,so we can use wait command
after the submit statement which will do the trick.
Edited by: Gautham Vangaveti on Aug 5, 2010 7:20 PM

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

Trying to install adobe acrobat pro 9 on a new laptop after deactivating it on old laptop. After installation I get Update check for some reason then doesn't let me go any further Anyone know why this is?

OK so I have deactivated and uninstall the version off the old laptop, then reinstalled the version on the new laptop. When you go to open a document it says it wants to do an upgrade check for some reason, anyone know why this is? It will not take the serial number after that and it doesn't show the version we have in the drop down list.

Hi johnb49273320,
What operating system are you running on the new laptop? If it's a current OS, then it may be incompatible with Acrobat 9. Please see https://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-prod ucts.html.
It could also be that you're trying to install an upgrade, and the installer is looking for the serial number for the previous version (is the previous version listed in the drop-down list?).
Best,
Sara

Verizon Edge???? What will be the stipulations. & Major issue w/ Razr Maxx HD

Let me explain why I am wondering about this at this point and the problems I am having. I am wondering and hoping to get some concrete info on the new edge plan. I am on my third refurb warranty replacement phone. I am sick and tired of it at this point. This third phone is a Razr Maxx HD and of course the first week it starts acting up. I get the following icons either one or all at the same time: sim card icon, a no smoking type circle thing over the signal bars, and then that will turn into a red triangle with a white plus sign. A month and a half later and 3 sims card later, I still have no idea at any given moment when I can actually use my phone. Even motorola said if the third sims card does the same thing then it has something to do in the sims card slot. Believe me, i have went round and round with customer service about this. I'm so sick of this situation at this point I would like to trade for a different phone but it seems that not an option at this point. So it's either get another refurb Razr Maxx HD or buy a Note 2 at $700 all up front to keep my unlimited data. Now I have an old Alltel plan with a limited amount of minutes which is enough for us but we have unlimited text and UNLIMITED DATA. Now the only way to keep this is to purchase a phone at full retail. I was already to upgrade my plan and get a Note 2 at the discounted price but I just cant give up my unlimited data I don't think....I mean 10 gb of data with three phone is almost the same price as I pay now with unlimited data. It's a little bit more but come on its unlimited data. AHHHHHHHHHH!!!!! We have been averaging 6 gb approx but still get a Note 2 and I see my usage going up. April I used over 6 myself (daggone Pandora radio lol). Ok what I need to know is how this new program is going to work exactly. I know you are supposed to be able to purchase a new device at full retail price with no contract and make payments on it over a 24 month period. Then after 6 months and only if you have paid half of what the device cost on full retail, you would be able to purchase another device. My issue comes in at ... should I wait till this program goes live Aug. 25th to get a Note 2, get one now at full retail (but its $700) all up front, or just get another refurb Razr Maxx HD for now. Plus I heard the Note 3 is coming this fall but I'm not holding my breather about it. I would like to know more specifics about the New Edge plan especially if they will allow us on unlimited data plans to keep keep it if we use this program. Can someone please help?

B33 I have read your links thank you for the time. So it does seem Verizon will not let us unlimited data users to take advantage of the Edge program. Nor do I believe it is good anyway. I see people selling their phones for 2 and 3 times as much as what the trade in program gives you anyway right now. So if you have to trade your phone back in definitely not coming out ahead to me anyway. I am not one to want to trade every 6 months to a year anyway unless my phone has just crapped out on me.
As far as the update, I have already ran the update and it did nothing to help my phone. According to Motorola it is something inside of the sims card slot messed up. It was still doing after I ran the update. I never know when I can and can't use my phone.
I was all ready to go get a Note 2 but do not want to lose the unlimited date even if we only use 6 gb combined right now. You never know when you will start using more esp if I got the Note 2. But...I hate to try and put out $700 right now. And I do not know how it is handled if I buy one off of EBAY even if the one I buy is new. So I am in between a rock and a hard place. My contact at my store thinks I should get another refurb and wait out till more details come out about this program to see if it will help me. Any additional advice is wanted and appreciated.

Possible upgrade solution for people who have HD and problems in general.

OK, for me, Leopard has been as painful as going osx from OS9, at least the upgrade has been , dunno about the retail copy., bugs, bugs, bugs with the upgrade for sure.
Here is what happens generally., you upgrade and basically you need to run disk tools from a external drive or the Leopard DVD., the problems move on still.
Solution i found was to back up to another drive, that is right guys, spend another hundred bucks no one warned you about., get a external HD or if your living it high and collect macs as Apple assumes you may just have a second Intel mac laying around with a Sata drive in it to start up in "Firewire Target Mode", (hold the "T" at start up)and start cloning your drive with SuperDuper (also need to purchase)..
Ok
1- once you clone your drive (usualy a hour for the base system alone).
2- erase it as one partition,
3- in the options make sure it is set as GUID partition (takes about a hour) and
4- then as well zero out all the data., takes about 2 hours there as well.
5- Now run disk utilities from the Leopard DVD or the computer or booted up drive you used to do all this., if you can not fix permission of th volume you seen to reformat the Drive again 7 pass!, could take 4 hours.
Finally you will be able re clone it, and run disk tools after a days work no one warned you about.
*This disk utilities operation may take about 1 hour but say 11, and look like this below;*
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/bottom.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/content.html", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/Description.plist", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/English.lproj/DisplayName.stri ngs", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/thumbnail.png", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/top.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/English.lproj/DisplayName.strings", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bg_letter.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bg_pattern.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bottom.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/content.html", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/Description.plist", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/English.lproj/DisplayName.strings ", should be 80, group is 99.
*Good luck*
*My ADVISE:* if you experienced these problems, as above, reformatting by zeroing out the data works. as for those who want Leopard. *DO NOT UPGRADE but install a RETAIL version of LEOPARD* until apple has a update,
I read posts where people who have the retail copy (full DVD) have not experienced these problems, mine was a upgrade from Tiger since i got a mac in the last 30 days.
WARNING: it has been hard to trust Apple fanatics with these things now days, many posts are denials to things not working so i could be wrong there as well, been honest saves time is all i can advise them.
If anyone has beter advise please do post it.

And what is yaml all about, shows up in disk utilities for hundreds if not thousands of issues?
showed up as a user as well.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/proxybasicauth-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyAuthenticator/cdesc-ProxyAuthenticator.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyBasicAuth/cdesc-ProxyBasicAuth.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyDigestAuth/cdesc-ProxyDigestAuth.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyDigestAuth/check_uri-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/cdesc-UserDB.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/get_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/make_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/set_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPProxyServer/cdesc-HTTPProxyServer.yaml", should be 0, group is 99.
------------------------------------------------------------

"Cost Rollup - No Report" not updating costs for some items.

Hi ,
We have an issue with "Cost Rollup - No Report" program. When it is run for all items in an Organization, some item costs were not getting updated.
"Include in Cost Rollup" flag in Master Item form and in Item Costs form is enabled for these items. When we run the report for specific item , it is working fine, cost
is getting updated. Only when we run the report for all items of an org, we are having this issue. Any suggestion or help in this regard is highly appreciated.
Thanks in advance,
Pavan.

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

Possible Slowness Solution For Mac In LR4.2RC

Hi all --
This might be a total red-herring, but after using LR4 for a while and experiencing the rotten slowness of it all on my MacBook Pro, I did some experimenting in LR4.2RC. I've written my findings up on my blog but I'll copy the solution here so you don't have to go digging.
Sidenote: for the benefit of the hardware nerds out there my main machine is a MacBook Pro Core i7 2.66GHz model (MacBookPro6,1), with a 512GB SSD, 8G RAM, running (at the moment) OS X 10.7.4. It’s not the most recent MacBook Pro, but it’s a 2010 model which with updates has no problems with anything else. My LR4 catalogue has about 110,000 images in it split into a hierarchy of Year -> Shoot -> Images.
The first thing I did was try and blitz the Preferences files. This has been known to work for Windows users, but of course the Mac version is different – at least that bit is. I’ll save you some time and tell you now that it didn’t do a dicky bird other than freak my copy of Lightroom out, so I ended up reinstating the plist files.
Then a friend suggested recreating the catalogue (cheers Gaz!). My LR4 catalogue came via a port from LR2 to LR3 over the past few updates. First thing I did was create a new catalogue and import everything from the old catalogue in to the new one via File -> Import From Another Catalog. It took a while but gave me a clean catalogue which sorta worked a bit better – still not massively fast, but faster.
The real paydirt came with Time Machine though. In common with a lot of Mac users I have a small external disk which I use to keep backups, handled by the OS. In addition to that there’s a sort-of journalling system which handles versions and Time Machine when the external disk isn’t connected (and incidentally will explain disk space discrepancies – you can read more about the phenomenon here).When I added ~/Library/Caches to the backup exclusions, LR4 was back to the speed I’d have expected.
To do this, click on your Time Machine icon (on the menubar, it’s the little clock with the arrow going backwards), and thenOptions on your Time Machine screen. It’ll allow you to exclude particular directories from the backup.
I can’t think of any particular downside to this as cache files are usually temporary, but I’m sure another Mac fanboi will correct me in the comments if this isn’t the case. As it is, it seems to have fixed it for me so far and I’ve been using Lightroom heavily for the past day or so. Whether it gets slower in time I don’t know and I’ll post an update if it does so. But I do hope this helps other frustrated Mac photogs out there!
Best wishes
Joel.
x

Joel!
This is fascinating and wonderful if it indeed works. I'm also going to try the exclude ~/Library/Caches tip and see if I get similar speed results. I'm finding that I have to quit out of Lightroom every few hours and relaunch when it gets bogged down to a less than happy place.
I'll report back in about a week with my findings.
Billy

Solution for some iPod/iTunes problems...

If you are having one or more of the following problems, Windows may be confusing iPod with a network drive or hard drive and may exhibit strange behavior, like:
-iPod does not show up in iTunes or as disk in Windows Explorer
-iPod does not show up as disk in Windows Explorer (even though disk mode in enabled ont he iPod).
-iTunes and Windows Explorer report the wrong amount of available space on the iPod.
-No songs appear on the iPod after an apprently successful update from iTunes.
-Music copied to mapped network drive instead of iPod.
-The iPod setup assistant appears in iTunes everytime the iPod is connected.
-iTunes displays the "iTunes has detected an iPod in recovery mode- use iTunes to restore" message even after the iPod has been restored.
-The wrong iPod name displays in the iTunes source list.
Please note*changing the iPod drive letter may not affect what letter theiPod uses on subsequent connections, so its not the best long-term solution unless you want to change this everytime you have issues.
To change the drive letter:
-Open Control Panel in Windows
-Go to Administrative Tools
-Go to Computer Management
-Go to Disk Management
-Locate theiPod and right click on it, then click Change drive letter and paths.
-Use the drop-down box to select a new drive letter. Make sure to use a drive letter that is not already assigned to a network drive. The drop-down menu will display all letters that are not assigned to a physical drive, but network drives will stil be listed so be careful. If you arent sure, add a new drive and pick your own letter, something way down the list is best since common drives are A, B, C, D, etc.
-click OK
-Click yes on the confirmation box
-Restart computer
Good luck!!! It worked for me!!!

Honestly, I don't know!! I searched ITunes and IE7 and saw that others were having the same problem I was and that if they stopped using IE7 Itunes started working again.
Basically, I was just proud of dumping Internet Explorer! See, I really love Macs. I had an ibook that finally conked out and i couldn't afford another mac.

Samsung Printer Firmware update information for iOS8 AirPrint compatibility issue

It has been noticed that there is a compatibility issues on some of the Samsung network printers while printing from iOS8 devices using AirPrint.
In order to resolve this compatibility issue with iOS8, new firmware for printer has been released.
Issue Case:
Printing using AirPrint from iPhone or iPad running Apple iOS 8.0 or later.
- Devices running version prior to iOS 8.0 or Mac OS X have no issues.
Details about affected printers and their fixed firmware versions.
Printers
Version with issue fixed
Samsung CLX-3300 Series
3.00.02.13 or later
Samsung C460 Series
3.00.02.13 or later
Samsung C470 Series
3.00.02.14 or later
Samsung M2020 Series
3.00.01.11 or later
Samsung M2070 Series
3.00.01.20 or later
Samsung M262x 282x Series
3.00.01.25 or later
Samsung M267x 287x Series
3.00.01.27 or later
Samsung SCX-3400 Series
3.00.02.05 or later
Please update your printer with the latest firmware as mentioned in the table above.
To update the firmware kindly follow the procedure mentioned below.
Search for your printer model on the link below
http://www.samsung.com/us/support/supportMain.do
Download the firmware.
Run the downloaded file and follow the instruction provided on the installation screen.
PS. During firmware update do not power off or unplug power cord of your printer. Doing so may make your printer unusable.
Moreover if in case non-compliant toner is used, it may cause error after firmware is updated.
We apologize for any inconvenience caused. We will try our best to provide best service and customer experience.
Thank you,
Samsung AirPrint support

Doesn't work .

A solution for macbook pro sleep issue

I had a very annoying problem with my ~1 year old MBP. When I closed the lid, about 50% of the time the computer would not wake up after reopening the lid. The screen would just stay black and there would be no responsiveness from the keyboard or trackpad. I looked up the problem on google and found that many, many people had the same issue and could not find a single solution that worked for me. I called apple support and there suggestion was to reinstall the OS, which I did not want to do. They also suggested booting off the installation disk, but I didn't want to spend time trying to track down an intermittent problem. The solution that worked for me was as follows:
in the preferences tab under security there is an option 'use secure virtual memory'; if you are using a password, this option is grayed out. you can leave this option checked, but it's important to know whether you are using secure VM or not.
the next step is to go the terminal and type
pmset -g | grep hibernatemode
you will see a number pop up, from 0 to 7. the meaning off the numbers is as follows:
0 - Old style sleep mode, with RAM powered on while sleeping, safe sleep disabled, and super-fast wake.
1 - Hibernation mode, with RAM contents written to disk, system totally shut down while “sleeping,” and slower wake up, due to reading the contents of RAM off the hard drive.
3 - The default mode on machines introduced since about fall 2005. RAM is powered on while sleeping, but RAM contents are also written to disk before sleeping. In the event of total power loss, the system enters hibernation mode automatically.
5 - This is the same as mode 1, but it’s for those using secure virtual memory (in System Preferences -> Security).
7 - This is the same as mode 3, but it’s for those using secure virtual memory.
I had 3 selected and this was causing me all the problems because I should have had it at 7, which is the option compatible with secure VM. to change it, simply type
sudo pmset -a hibernatemode 7
That's it! I tried setting it to 0, but this did not solve my problem. Hopefully, this solution will hold up, but I haven't had any problems thus far.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Possible update solution for some Jelly Bean issues on Razr Maxx

Similar Messages

Maybe you are looking for