Possible with FCC?

Hello All,
I have a File -> PI -> DB scenario.
I am having difficulty with the CSV file structure.
INFO_LINE ... 1
INFO_LINE ... 2
INFO_LINE ... 3
CUSTOMER :,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
CustName,,,Address1,Address2,,,,,,Phone
John,,,New York,USA,,,,,,+1-888-111-2222
George,,,Seattle,USA,,,,,,+1-253-123-1234
Number of Customers : 100,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Provider :,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
ProviderName,Location,S-Id,,,,,,,,,ClientStatus
ABC,Seattle,1234,,,,,,,,,Paid
XYZ,Dallas,0121,,,,,,,,,Partial
Number of Providers : 42,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1. All the lines which has been striked, is not required.
2. You might notice that there are few extra commas in between fields. I can't take away these extra commas because there can be a situation where a valid field value is coming as blank.
3. CUSTOMER and PROVIDER are at the same level of hierarchy.
4. CUSTOMER and PROVIDER will occur only once in the file, but of course, they will have multiple "line items" or "rows" in them.
Hope I am able to explain my scenario.
How this can be achieved using FCC? Kindly help me get through this.
Thanks,
Abhi

Hello Liang,
Thanks for your response.
I am guessing that only FLD0 has value, and there is no value from FLD1.
I guess I am unable to make my point clear. I will try to explain again.
There are 5 fields, namely - FLD0 ... FLD4.
But in between these, there are blanks. These blanks don't belong to any field as such or they are not corresponding to any field. But this is for sure that these number of blanks will remain the same in the file, for example - 10 blanks for Customers and 8 blanks for Providers.
So, there are values after FLD0. Hope this makes my point more clear.
I used the second option, so that I do not have to maintain OS level scripts since we had both Unix and Windows envrionments.
Yes, I would like to go for mapping option as I don't want to keep on the OS level ... our OS is Linux.
I will do a basic FCC and try to pick the file. I will see how that comes up and then I will share the details with you. I guess I might do this over the weekend, so will get in touch with you early next week.
Thanks once again!
-- Abhi

Similar Messages

  • I am getting old and looking forward to use I Pad as a Phone if possible through WIFI! I this possible? The screen is to small for me! If possible, with new I Watch taking calls, other uses through I Pad!

    Like I wrote on title, I am getting old and it is not easy to see E-mails, news etc. on a I phone! New I phone will not help me for the size.
    If possible, everything without calls, I would like to use I Pad as direct unit, and for calls through I Pad over WIFI all calls. If a call as Skype, I would like
    to use the I Pad as a monitor. Is this possible?
    I found on a side that there is a product for people for better hearing, which can be put into the ears, using WIFI with I Phone.
    If this product could be used also for I Pad as a Phone for hearing, and the I watch or I Pad as Microphone, it will be great for old Mac users.
    Is this possible with our system know?
    I am using Mac since Classic II! Would like to continue with the newest items with the possibility for old person with bad Eyes or Ears.
    Looking forward for a kind answer
    with regards
    Christian an old Mac user!

    Definitely No

  • When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

    When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

    Reinstall iTunes. Make sure you follow the instructions in this support document to the letter. http://support.apple.com/kb/HT1923.
    You may have some problems because Apple has not certified that everything works with Windows 8 yet.

  • Multiple usage of Source System is not possible with installed DMIS version on source

    Hello folks!
    I`ve got a problem trying to adjust the Data Replication to SAP BW (on HANA) using SAP LT Replication Server.
    I`ve deleted one connection and after that I`m trying to create new one through  Configuration & Monitoring Dashboard (transaction LTR) with the same source / target systems.
    As result when on the second step (Specify Source System) I specify RFC destination of the source system it appears an error with text
    "Multiple usage of Source System is not possible with installed DMIS version on source".
    But there`s no any adjusted connection in system now..
    Please, help me to understand  how to fix that problem, I can`t find a solution

    Hi,
    When you say that you 'deleted one connection', did you delete the RFC connection or the SLT Configuration? If it is not a real multiple usage scenario, then deactivate the 'allow multiple usage' flag, else install the correct DMIS version on both SLT and source.
    Thanks
    kris

  • What driver or software patches do i need to install in my windows 7 laptop, in order for the laptop to capture Bluetooth messages, which is possible with window 8?

    Hi,
    i am connecting a Bluetooth device to my laptop. I notice that Message Analyzer could capture Bluetooth messages only if I am using windows 8? I am using window 7. What driver or software patches do i need to install in my windows 7 laptop, in order for
    the laptop to capture Bluetooth messages, which is possible with window 8?
    Also, i notice that using window 8, i am able to capture Bluetooth message but i am not able to display wireless perfromance statistics such as signal strength, throughput, etc? Is there a way for me to get such information.
    Please help.

    If you look at the link you sent me:Default Trace Scenarios
    http://msdn.microsoft.com/en-us/library/jj659262.aspx
    "Windows 8 Bluetooth (Windows 8/Windows Server 2012 or later) 
    Troubleshoot Bluetooth issues"
    So what about Windows 8 earlier? Not supported?
    My question: What driver or software patches do i need to install in my windows 7 laptop, in order for the laptop to capture Bluetooth messages, which is possible with window 8?

  • F-90 TAX (Posting is only possible with a zero balance;correct document )

    WHEN I AM POSITNG THE DOCUMENT THROUGH F-90 I AM GETTING THE FOLLOWING ERROR
    ERROR:Posting is only possible with a zero balance; correct document
        Message no. F5060
    ACTUALY I HAVE SLECTED VENDOR 31 ASSET 70 WITH TAX CODE AFTER SIMULATING THE DOCUMENT
    THE FOLLOWING ENTYR IS COMING BUT WITH GREEN ERROR AS I HAVE MENTIONED ABOVE
    ENTRY VIEW AFTER SIMULATING IS AS FOLLOWS
       PK  BusA Acct                               INR   Amount        Tax amnt   
    001 31       0000700000 One time Vendor for        75,000.00-                  
    002 70       0020001031 000040010498 0000          75,000.00                 H1                                                                               
    Other line items                3,000.00                   
    D 75,000.00           C 75,000.00                   3,000.00  *    2 Line items
    ACTUALLY I HAV SEELECTED CALCULATE TAXES ON NET AMOUNT IN FB00.AT THE TIME ENTRY IS POSTING AS FOLLOWS
    31 VENDOR 75000
    70 ASSET  72200
    40 VAT     2800
    BUT THE ABOVE ERNTRY IS WRONG
    CORRECT ENTRY IS AS FOLLOWS
    31 VENDOR 78000
    70 ASSET  75000
    40 VAT     3000
    ACTUALY CALCUCULATION IS ON NET AMOUNTS.IS I DESELECT IN FB00 PROBLEM WIL SOLVE AND REFLECTING WITH GROSS AMOUNTS IN ASSET
    BUT TAX IS NOT CALULATING IN CUSTOMER INVOICE
    Regards
    sumathi
    Edited by: sumathi lakshmi on Jan 9, 2009 8:24 AM

    I HAVE BEEN TRYING THE SAME CAN ANYONE HELP AS I AM NEW TO THIS SYSTEM?
    F5060
    Posting is only possible with a zero balance; correct document?
    I HAVE BEEN TRYING BOTH VENDAR AND CUSTOMER WITH INPUT TAX AND OUTPUT TAX BOTH ARE SAME ERROR. IS THERE ANYTHING IN SETTINGS I NEED TO RECTIFY?

  • Posting is only possible with a zero balance; correct document

    Hello SAP gurus,
    Please help me here. I tried to post a vendor invoice but i got an error message "Posting is only possible with a zero balance; correct document". 
    The debit and credit balance is correct. In document entry i  checked calculate tax and the GL master was assigned a tax code. How can i correct the document and be able to post the invoice?
    Thanks in advance,
    Prakash

    Hi,
    I had also faced same issue and got it resolved.
    For resolving it, I made necessary changes in Editing Options in transaction FB01.
    These Editing options are user specific settings and these can be found in transaction FB01 -
    Go to Settings --> Editing Options (F9).
    Alternatively, you can click Editing Option Button on FB01 Screen (Call Up Editing options for Accounting).
    Please check if it resolves your issue.
    Best Regards,
    Rajinder Sharma

  • Batch: Open Bridge 'Stacks' as layers in PS CS5 + run action. Is this possible with script??

    I posted this topic a couple of days ago - I didn't know about this forum/group so the thread appears in Photoshop Scripting and Bridge Windows. I haven't found a solution on those forums - can any one here help?
    http://forums.adobe.com/thread/880777?tstart=0
    http://forums.adobe.com/thread/880779?tstart=0
    I would like to automate part of my workflow that involves opening stacked images (in Bridge CS5) as layers in Ps CS5 and running an PS action that composites the layers and processes the image. Something similar to 'Process Collection' in Bridge CS5 only with my own action instead of merge to HDR/Panorama.
    Apparently this is possible with Mac 'Automator' - is there anything I can do in Windows? I don't have any experience with writing scripts, but have friends that can help. Can someone tell me if its possible and point me in the right direction please?
    This needs to be a batch process. I know how to open images as layers from Bridge so that I can manually run the PS action - I would like to automatically process lots of images in this same way.
    To clarify, the script if possible will need to
    1) find first stack (in Bridge [in selected folder])
    2) open as layers in PS
    3) run PS action
    4) save and close (as psd preserving layers)
    5) find next stack in Bridge (selected folder) and repeat.
    By 'stack' I mean a set of similar files (for instance same scene -2EV, 0EV, +2EV)
    Bridge's 'Process Collection' feature is great because it very cleverly recognises similar images (I think you have to stack them first) opens them and either processes them into a hdr or panoramic image. Instead or hdr or pano, wouldn't it be great if you could run your own action.
    Bridge's Image Processor is fantastic at opening a batch of individual files and running your own processing action, but it won't open groups of images ('Stacks' or sets) as layers.
    What I need is basically a hybrid of the two.

    In case you miss my late append in the other thread you may want to look at the auto collection script that ships with the Bridge and use it as a base for what you want to do. You may also be able to automat the creation of your stacks if their time stamps are close. The Auto Collection Script night now does two types of stacks  HDR and Panoramas.  You may be able to modify it to do a third stack type. You stack type and use your stack processing process instead of mearge to HDR or PhotoMerge.
    From Bridge help:
    The Auto Collection CS5 script in Adobe Bridge assembles sets of images into stacks for processing as high dynamic range (HDR) or panoramic composites in Photoshop CS5. The script collects images into stacks based on capture time, exposure settings, and image alignment. Timestamps must be within 18 seconds for the Auto Collection script to process the photos. If exposure settings vary across the photos and content overlaps by more than 80%, the script interprets the photos as an HDR set. If exposure is constant and content overlaps by less than 80%, the script interprets the photos as being part of a panorama.
    Note: You must have Adobe Bridge with Photoshop CS5 for Auto Collection CS5 to be available.
    To enable the Auto Collection CS5 script, choose Edit > Preferences (Windows) or Adobe Bridge CS5.1 > Preferences (Mac OS).
    In the Startup Scripts panel, select Auto Collection CS5, and then click OK.
    Select a folder with the HDR or panoramic shots, and choose Stacks > Auto-Stack Panorama/HDR.
    Choose Tools > Photoshop > Process Collections In Photoshop to automatically merge them and see the result in Adobe Bridge.

  • Possible with XSLT mapping?

    Hi,
    I have source xml structure of format
    <Header fld1 fld2 fld3
    fld4 fld5 fld6  ><line   fld7 fld8 fld9 </line></header>
    Header occurence is 1---unbounded
    and line occurence is 0---unbounded
    and line items can exist or not for some header items.for some headers items can be single or multiple.
    I get xml files on sender side and need to convert to flat files ,so I am using sender file CC on sender and receiver file CC with FCC on the receiver side.
    I am able to get with receiver file FCC ,I know FCC can support two level heirarchies only.
    header1
    header2
    header3
    header n
    line x
    line y
    line z
    line n
    so i dont know to which header values the item values belong to.I need to get
    this structure
    header1....(if no items)
    header2....(let say 2 items)
    linex
    liney
    header3...(no items)
    header4....(one item)
    linez
    header n.....(again no items)
    so I have another Xi guy,he told me that we can achieve this by using a XSLT mapping rather than gaphical mapping which I am using now.
    so can we get the structure what I wanted with XSLT mapping or is it nothing with mapping and it is with adapter?(I think its nothing with mapping)
    I know we may get the required output structure by writing a module program and call that in the receiver file adapter.
    suggestions please.
    thank you,
    regards,
    Babu

    udo,
    sorry if I put in confusion with my structures of both source and target.I am trying to give little eloberate
    I have source  xml data like this.
    <Header1 fld1=1234 fld2="name1" fld3='SAP1"
    fld4='000" fld5=0 fld6="sdn1"</header>...............no line items here
    <Header2 fld1=123 fld2="name" fld3='SAP"
    fld4='00" fld5=0 fld6="sdn" ><line fld7=value1 fld8=value2 fld9=value3 /line><line fld7=value4 fld8=value5 fld9=value6 /line></header>.....two line items here
    <Header3 fld1=123 fld2="name" fld3='SAP"
    fld4='00" fld5=0 fld6="sdn" ><line fld7=value7 fld8=value8 fld9=value9 /line></header>......one line item here
    Header4 fld1=12345 fld2="name2" fld3='SAP2"
    fld4='0006" fld5=01 fld6="sdn2"</header>.......no line items here
    I want target flat file structure like this considering "~" (tild)as delimiter
    1234name1SAP100000~sdn1 ...................> flatfile values for header1(no item values for this header1)
    123nameSAP000~sdn..........................> flat file values for hader2
    value1value2value3...........................>line item values for header2
    value4value5value6...........................>line item values for header2(two line item values for this header2)   
    123nameSAP000~sdn..........................>values for hader3
    value7value8value9...........................>line item values for header3(one item values for this header3)
    12345name2SAP2000601~sdn2..................>values for header4(no item values for this header4)
    ................... like for n header values.

  • Is synchronous scenario possible with JDBC & JMS adapter?

    Suppose,JDBC adapter is updating a table or deleting some entry from a table.Can we have an acknowledgement back that the work has been done successfully??
    same qstn for JMS adapter also..
    Suppose JMS adptr is communicating with any messaging system,can we have acknowledgement back?

    Jms Adapter supports Asynchronous scenarios only but If u want to use Synchronous then possible with Standard module beans :
    For ex: JMS to Rfc synchronous scenario:
    In id:
    Sender jms adapter supports Asynchronous scenarios so we have to use standard module beans in Module tab.
    Like :
    AF_Modules/RequestResponseBean -> 0
    CallSapAdapter
    AF_Modules/ResponseOnewayBean -> 1
    And Provide  values in configuration:
    0 -> passThrough -> true
    1 -> receiverChannel ->provide RECEIVER JMS adapter name ( have to create one more JMS receiver communication channel for responce )
    1 -> receiverService ->provide receiver adapter service name (that is  provide sender business component because need response for sender )
    jdbc adapter :
    http://www.****************/Tutorials/XI/SOAP2JDBC/Page1.htm

  • PLEASE LET ME KNOW IF THIS IS POSSIBLE WITH FLUID GRID LAYOUT?

    This is an example of what I'm trying to do. Excel was the best way for me to provide a visual. Is this possible? Every time I try to place divs in a similar layout, the div will not take up multiple rows. For example div 4 would move down and where row 7 is would now be row 4. Div 2 would have also moved down because of 5. I have a large image that needs to be placed to the left of a header and vertical menu. I'm trying to keep the header and menu seperate and the image needs to be aligned to the top left of the text. I'm sorry that I'm overcomplicating this. I must admit it surprises me that the fluid grid appears to be dictated by rows. I'm wondering if for this particular design I should just stick to a table.

    I'm perplexing by your question.  How do you expect the divs to move in other resolutions?  For the question to be whether this is possible with a fluid grid there has to be some transformation between the layouts.  If you are just looking for a static layout, that is possible.  If the heights are to be fixed like that you could just specify the heights on the divs to make the height.  If the divs are moving down then add the attribute clear:none; to the div, in this case 2 and 4.  This will prevent the float from being cleared and pushing the element down.

  • Non-cumulative initialization is not possible with historical data

    Hi all,
    While loading inventory cube.. 0IC_C03  .. after loading 2LIS_03_BX request get sucessful. while compress that request No Marker update. i getting following error msg.
    <b>Non-cumulative initialization is not possible with historical data</b>     
    Regards
    siva.

    You sure you didn't use BF instead of BX?  This messge indicates that you have historical data in your cube whereas BX only loads a fixed state at a specific point in time...  Or maybe, did you initialize BX twice in R/3 without deleting the previous init, I don't know if that could cause that error but it's another possibility.

  • Would like to automate open stacks as layers + run action. Possible with script??

    I would like to automate part of my workflow that involves opening stacked images as layers in Ps CS5 and running an PS action that composites the layers and processes the image. Something similar to 'Process Collection' in Bridge CS5 only with my own action instead of merge to HDR/Panorama.
    Apparently this is possible with Mac 'Automator' - is there anything I can do in Windows? I don't have any experience with writing scripts, but have friends that can help. Can someone tell me if its possible and point me in the right direction please?

    Sorry but a script can not access Lightroom so your first step isn't possible.
    Second step is Lightroom not Photoshop.
    Maybe something could be done if you could work out a Photoshop Only workflow.

  • Higher resolution possible with capslock keyboard as midi contoller?

    I'm wondering if it's possible to use the capslock keyboard in logic as a midi controller with higher precision than i seem to be getting. For example, assigning the capslock keyboard to control the tune knob in the exs24 goes from 0 > +/- 24 in 1 press of a button. I want it to go, say, 1 at a time.
    I'm thinking this may be possible with the transformer, but since i've just decided to start learning the transformer i didn't want to begin trying to do a task that isn't possible in the first place. So i'm wondering is it possible?
    Logic 9

    Thanks for replying. Sorry about late response i actually didn't think anyone had answered after a few days so just left it and forgot about it.
    I was thinking maybe it was possible to route the pitch or velocity of the midi message somewhere else to only move in smaller increments on a controller, i.e. caps keyboard. Aye, knobs would be easier, but i don't have any yet as i only just justified the expense on a mac and logic... wait a short while first...
    I've decided to leave the transformer alone for now anyway as it's a bit too technical for time being and i should learn more basic stuff first.

  • Apple ipad2 is recognized bei itunes in "wartungszustand". when i click reset on itunes and itunes tries to reset the ipad i get the information not possible with code 3194

    Apple ipad2 is recognized bei itunes in "wartungszustand". when i click reset on itunes and itunes tries to reset the ipad i get the information not possible with code 3194

    See if this helps : http://support.apple.com/kb/TS3694#error3194

Maybe you are looking for