Possible workaround for CSCed41207

Hi,
Maybe not a real solution, but could be used as a workaround for bug CSCed41207 (CallManager needs support for MGCP fractional PRI).
You can set the B channels which are unavailable (because it's a fractional PRI) to maintenance mode with the following service parameter.
"Cisco Callmanager" service. Select advanced. Under "Clusterwide Parameters (Device - PRI and MGCP Gateway)" use the "Change B-Channel Maintenance Status #" parameter to disable the unavailable channels.
Example, if you have a E1 with 15 channels available, set the parameter to:
S1/[email protected] = 0000 0000 0000 0000 1111 1111 1111 1111
A 1 disables the channel. Always enable channel 16 because this is the D channel (for a E1).
You can use this for up to 5 gateway's. I've used this solution for fractional PRI with MGCP numerous times and it works!

Hi Dirk
Thanks for sharing the workaround solution for "CSCed41207".
We are working on new capabilities, where you can see relevant bug related discussions in the bug details page itself.
Discussion posts like yours, will show in the bug details page of "CSCed41207" and other Cisco Bug Toolkit users can benefit from this knowledge.
Please continue to share such experiences in the future.
Thanks
Arun

Similar Messages

Complicated possible workaround for Keynote to Quick Time issues etc.??

I've been experiencing many of the issues already presented here. This is obviously a major issue that Apple may already be trying to fix for an update, but they never tell anyone what they are doing. My project contains .mov files with audio and they just don't behave, the audio is off and movie files either play with disjoionted audio, or, freeze on the first frame. Also, half the transitions don't export to quick time, idvd or any other format I've tried.
For those with 2 computers and a little extra hardware, I've got a possible workaround that "may" at least get the project rolling again. I hooked my MacBook Pro into my Eye TV 250 and switching to AV input, simply played the presentation I'd recorded with all my timings and transitions through the Eye TV box into my desktop computer. I then exported the live recording through the Eye TV software to a .mov file and all the transistions and audio seemed to be the way I set them up. I then brought this movie into Garage Band and added a backing track.
Eye250 is not ideal for commercial projects because I seem to have some quality loss, BUT, I was importing to a G4 mac Mini so maybe that's an issue as well. If anyone else has an external digital video input device and two Intel machines, could they please try this out and see if the quality is HD.
If this works, it would at least be a workaround for guys with commercial projects on deadline until Apple fixes their software. Appreciate any input!!!!

Sadly, IP printing is not a feasible solution for me. When I configure it as you've described, the print job goes to the queue and stalls with this message--
Network host '192.168.0.187' is busy; will retry in 10 seconds...
This print-once-then-never-again issue is very frustrating. Airport express has been an unreliable print server from the get-go. The firmware hasn't been updated in two years and Apple has never published a list of supported USB printers. It's one of those things they want reps in the apple store to be able to verbally tell people that the product will do, but in writing, "good luck with that."
I'm getting on Amazon right now to find a real print server. AE is a burner of time.
Seth

Possible workaround for: Launch Debugger Error "Unable to connect to the RDS server"

I do not yet have a reproducible case for this. *Sometimes* ColdFusion Builder throws the "Unable to connect to the RDS server" error, when attempting to start a debug session against a remote server. However, "RDS Dataview" and "RDS Fileview" views correctly list the servers and their related data/file, and testing RDS connection result is "Test connection was successful". The workaround is:
1. Login to the ColdFusion Administrator
2. Navigate to "Debugger Settings" page (beneath "Debugging & Logging")
3. Click on "Stop Debugger Server" -or- "Restart Debugger Server"
4. Restart ColdFusion Application Server
Notes:
a) Step #3 must be done via ColdFusion Administrator, not via ColdFusion Admin API (stopLineDebugger()|restartLineDebugger())
b) Step #4 can be done via ColdFusion Administrator -or- ColdFusion Builder
c) Note that there is a CF9 Release Note for Bug #78488: "When a server having "Windows service option" ENABLED is added as a remote server, then Start-Stop-Restart operation cannot be done on it." However, I've found that "Restarting" a remote server, that is running as a Windows service, is possible in ColdFusion Builder (at least this is so on standalone developer edition). Like Bug #78488 says, I am unable to "Stop|Start" a remote server that is running as a Windows service. I'm just mentioning all of this, due to my suggestion in "b", that CF can also be restarted via ColdFusion Builder.
It is interesting that attempts to stop|restart the debugger server, via CF Admin API, do not resolve the issue. So, it seems that the "Stop Debugger Server" and "Restart Debugger Server" buttons, in CF Admin, are doing more than calling the corresponding CF Admin API methods.
Attached is an image of the error.
Just posting all of this as an FYI, in case it helps anyone.
Thanks!,
-Aaron Neff
(OH.. I'm unable to attach images at this time *DOH!* ..well, I'll try to remember to update this post w/ the image, once I see that attachments are allowed.)
I'll try to describe the error message window:
- It is 494x452 pixels
- Title of the window is "Error occurred while launching the Debugger"
- Body content of the window is as follows:
Unable to connect to the RDS server 'ServerNameHere'
Ensure that the server is currently running and that line debugging and RDS are enabled. You may also need to check your RDS connection settings in Eclipse to ensure that they are correct.
Error Message:
-1:Error connecting to JVM for debugging at localhost:5005. Could not attach to the VM at port 5005. You must specify this debugger port in the JVM settings of your application server, for example: -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005. You will also need to make sure that another debugger is not currently connected to the CF JVM at the same port (5005).
Root cause ->
Connect refused: connect

hi,
I have been facing the same problems while connecting to Oracle Web Conferencing and is getting error message :Unable to connect to the server. The Web COnferencing Console will now close. Please try again later. If the problem persist, contact your system administrator.
Diagnostic report shows failed on the connectivity part
Connectivity
mx-direct Failed
0:00:00.719 Connecting to web331.oracle.com:1025
0:00:00.922 Name resolved to 148.87.108.234
0:00:21.906 connect() failed (0x8007274C)
0:00:21.906 Connection failed (0x8007274C)
Pl help me to fix the problem.
Regards
Gobind Ahuja

Possible Workaround for iTunes skipping / crackling

Right, following the recent number of complaints regarding iTunes 7, I've done some work on the problem and have found a possible solution.
The new UI seems to take far more CPU power and RAM than it's predecessor, so here's a fix that may help on some systems. Please note that you MUST be running Windows XP for this to work:
1) When you first load iTunes, press Ctrl + Alt + Del,
2) Choose the tab labeled "Processes", and find iTunes.exe in the list displayed
3) Right click on this, and choose "Set Priority > Above Normal"
Close Task Manager, and hope that this works
I have tried this on two systems, and it seems to work. Please post your success / failure stories
Windows XP Pro

hey wsup i came across this forum and i must say its a start. I tested it on my videos and i noticed less lag and choppiness in the videos than before yet there are still some. I noticed the videos mainly lag when im wathign a video and using AIM on my laptop. ITs a start yet and its better than where i was before, but i dont wanna have to set priority to itunes and then just have all my other applications lagg.
So for now the videos are ok, but i dont wanna divert so much memory to itunes. Soo thnx for the solution. Better than what anone else has come up with lol ight get back to me if u find anymore solutions thnx

A possible workaround for C2D Airport problems?

A collegue advised the other day to download iStumbler, a free application that seems to sit and monitor all connections coming in your Airport, also for Bluetooth, Bonjour, etc.
Well, I did... and ever since this thing started to work seeing my Network wifi the airport bars has returned back to the maximum level and there has been no connection drops, re-connecting flawlessly after sleep.
Its funny also how iStumbler is able to see more Network wifis than the Airport menu: I see 2, sometimes 3 connections that I never saw on the Airport menu.
The signal is reported to be at 70% with a 13% noise. But working great!
Can someone with Airport problems try this solution and see if it works too? Maybe we are into something?
Regards,
-- Carlos

I had installed istumbler a couple of days ago it did seem to improve the signal for a period then the signal dropped back to the normal 4/5 bars.
After your post I started istumbler again and found there was an update the purports to solve signal problems with core 2 Duo macs.
I have updated and have full signal strength for last 5 minutes longer than ever before.
Fingers crossed

Possible Workaround for Whine

Ok so i have had my MacBook for like 3 weeks now and I absolutely love it and yeah it has the whine but it is very faint doesnt bother me. Anyway so I just got a wireless Mighty Mouse and just realized while the mouse and the MacBook are paired there is absolutely no whine. I just thought some of you guys would like to know or would know why it does this. It still whines with Bluetooth turned on but with the mouse it completely goes away.
MacBook 2GHz and 2 gigs of ram 80 gig Mac OS X (10.4.7)

Recent ruminations postulate the whine may occur under OSX when the CoreDuo processors go into a deep sleep mode during times of low activity under normal usage. So having something running which prevents the CPU from being inactive enough to power down like this, as it were, accordingly prevents the whine. It doesn't surprise me that a bluetooth device would function this way. Your CPU temps are probably also slightly hotter and battery life shorter, which seems to be the case with the other work-arounds people have discovered. I use voodoo (check out the following thread):
http://discussions.apple.com/message.jspa?messageID=2776741#2776741
and here, from the Macbook Pro people:
http://discussions.apple.com/thread.jspa?messageID=2633897

Workaround for ORA-04030 error

hi,
we've encountered the following error:
ORA-04030: out of process memory when trying to allocate 296 bytes (callheap, koposal dvoid)
all of the research i've done points to setting up the database with a Very Large Memory configuration, which will be carried out at a later date as we're still in the development stage.
is there a possible workaround for this error?
thanks
santosh sewlal

hi,
we're inserting into tables - spatial data and images, from a C#.net application that sends data to the db in a BLOB

SSAS Tabular in DirectQuery - What are the workarounds for formula limitations?

Hello,
I need to create an SSAS Tabular model against the database of a live, real-time, line of business transactional system (i.e. a CRM).
The business requirement behind it is that we need to create some complex reports against live data, and our DW is only updated daily.
This live model will however be partitioned with a time-variance limitation (e.g. only records which are XX old can be returned).
Now here is the challenge. Since I am querying live data, then I believe the model must be configured in DirectQuery model. Am I right?
The issue is that DirectQuery mode is full of formula limitations. So my concern is, if I need a calculated column or measure that I cannot make it work due to DirectQuery limitations, then what are the alternatives?
Remember that the data source is from a live system, so it is not like I can create columns and measures in the underlying relational database.
Please advise.
Regards,
P.

Hi pmdci,
According to your description, you want to use some functions in calculated measure which are not supported in DirectQuery mode. Right?
In Analysis Services Tabular, since DirectQuery has the real time access and scalability, this comes with a price of restrictions on a number of DAX functions and missing Calculated Column feature. Generally the workaround for these scenarios
is replacing those functions with other functions which are supported in DirectQuery mode, or create columns in the data source. However, as you said, your environment is not possible to create columns in the database. And a lot of those limited
function are not replaceable, like time intelligence functions. So actually, there's no really effective workaround currently.
For you requirement, I suggest you submit Microsoft a feature request
at https://connect.microsoft.com/SQLServer
so that we can try to modify and expand the product features based on your needs.
Best Regards,
Simon Hou
TechNet Community Support

Are there any workarounds for multiple PDF files created for a single Word 2011 document?

I am running...
Mac OS X Version 10.6.8
Word for Mac 2011
Adobe Acrobat X Version 10.1.0
I am working with 100 plus page Word documents that go back and forth between portrait and landscape layouts. When I attempt to create an Acrobat PDF document (or one using the native Mac PDF function), I end up with 10 to 15 separate PDF documents. One person suggested that I simple stitch them together, which is an inordinate amount of work as compared to how simple it is do on my PC with older versions of Acrobat and Word. However, I have noticed that the margins are way off and the pagination is off sometimes too. So even this workaround is not the answer. I last talked to Microsoft, Apple, and Acrobat tech support about five weeks ago. Each blaming the other two but saying they were working together to solve the problem. My recent searches of forums has not revealed any solutions nor have updates changed anything.
As I am anticipating the day when my old PC stops working, I am searching for a possible workaround or other solution for this problem.

Thanks for your reply.
The tip-off may be this. In Word 2007 on my pc when I print the document to a printer, Word generates 1 print file for the entire document. If I print to PDF, one print file is generated by Word and Acrobat creates a PDF from this file.
What I just discovered by accident was that when Word for Mac 2011 prints the same Word document to a printer it creates about 10 different print files. So instead of a 100 page PDF document I end up with 10 PDF documents of 1 to 30 pages depending where the page orientation shifts in the Word document. If you print to a printer that is not turned on, you can see all of the files stacked up in the printer queue. I suspect that Word for Mac 2011 generates 10 different print files during the PDF creation process and therefore Acrobat logically creates 10 different PDFs. Unfortunately, there are margin errors and other layout errors in these 10 different PDFs so stitching them together is useless.
I am beginning to think that the way Word for Mac 2011 prints documents is simply incompatabile to Acrobat or the PDF creator that is native to the Mac OS.
I just think that this is a problem that Microsoft is going to have to fix.

Workarounds for searching a text field in SQL Server 2000

Hi,
I have a need to search within a text field in SQL Server 2000. In the
limitations section it notes that this is not possible. Is there a
recommended workaround for this in terms of performance? I have no way
of knowing the length of the text field in advance, and this could be
fairly large. Also, the number of objects that could contain the text
can be fairly large as well.
Thanks in advance,
Khamsouk

Note that some databases (or Oracle, at least) provide alternatives to
LIKE '%foo%' that are more efficient for large text blocks, given that
you have the appropriate indexing plugins etc. etc.
To use one of those types of search operators, you'd have to put
together a custom extension.
-Fred
Fred Lucas <[email protected]> wrote:
I'm assuming that when you say 'a text field', you're referring to a
SQLServer TEXT field, as opposed to just any old field that contains
text.
Like I said, I'm by no means a SQLServer pro, but I just ran:
SELECT CLOBSTRINGX
FROM LOCATORTESTOBJECTX
WHERE CLOBSTRINGX LIKE '%o%';
and got back my test row with 'foo' in the CLOBSTRINGX column.
CLOBSTRINGX is a TEXT column.
So, it is possible that our stringContains() extension will just work.
But then again, maybe not. I'm guessing it will.
Give it a try and, if you get an error, post the generated SQL (turn on
SQL output by setting the com.solarmetric.kodo.Logger property to
'stdout') and the error that you get. Also, try executing the generated
SQL directly against your data store to see if it works there.
-Fred
Khamsouk Souvanlasy <[email protected]> wrote:
Basically I just want to use kodo's extended stringContains syntax on a
text field. Is this possible?
Khamsouk
Fred Lucas wrote:
I'm not intimitely familiar with SQLServer's text searching
capabilities, but I'm confident that you could create a query extension
that would do what you need it to do.
What is the SQL that you are trying to generate?
-Fred
Khamsouk Souvanlasy <[email protected]> wrote:
Hi,
I have a need to search within a text field in SQL Server 2000. In the
limitations section it notes that this is not possible. Is there a
recommended workaround for this in terms of performance? I have no way
of knowing the length of the text field in advance, and this could be
fairly large. Also, the number of objects that could contain the text
can be fairly large as well.
Thanks in advance,
Khamsouk
Fred Lucas
SolarMetric Inc.
202-595-2064 x1122
http://www.solarmetric.com

JDev team: is there a workaround for bug1482140?

I would like to know if anybody has figured out a workaround for bug 1482140 which is listed in the JDeveloper 3.2.2 readme. It states that it is not possible to deploy EJBs to 8.1.7 running on Solaris. It also indicates that it should have been fixed in 8.1.7.1 but the list of fixed bugs in 8.1.7.1 does not include this one. When is this going to be fixed? Why is there no status on it in Metalink? Is there something clever I can do similar to the workaround given for deploying BC4J?
Thanks for any help,
Matt

Uh, dude? What are you talking about? I've seen the workaround for the aurora_client.jar bit but I thought it only applied to BC4J as it says in the HOWTO under the JDEV docs. As for the 8.1.7.1b patch, this is the first I've heard of it. It doesn't help that searching for this bug under Metalink doesn't produce any results. The way I see it is that I should be able to enter the Bug number in Metalink, and it tells me what patchset the bug is fixed in. That mechanism seems to have broken down here. oh well, I have no problem with having to be told something twice, I'm not perfect. At least I have the stones to post messages with my name and email address Mr d. cheers.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by d:
Matt's been told about both of those options previously and he does not understand !!<HR></BLOCKQUOTE>
null

Is there a workaround for websites that use "frames" when Safari does not support?

Is there a workaround for a website that requires "frames" when Safari (5.0.6) does not support it?

Has anyone found a work-around for this that works?
No. Any attempt to use an unsupported network device with Time Machine will probably result in data loss, even if it seems to be working at first. If you take data protection seriously, you won't try.
Is it possible to get Time Machine to use SMB to make the backups?
No.

Workaround for inability to scan on USB 3.0 port

I've got a late 2012 era Mac Mini (specifications here) that I'm trying to set up as a printing and scanner server for my Brother MFC-7340.
Long story short, I have discovered that scanning does not work when the MFC-7340 is plugged in to a USB 3.0 port. In this case, scanimage returns the following error:
scanimage: open of device brother3:bus4;dev2 failed: Invalid argument
and does not scan. This occurs on both my Mac Mini and my laptop (both running Arch) when plugged into a USB 3.0 port. When I plug the scanner in to a USB 2.0 port on my laptop, however, scanimage is successful.
I have found some mentions of this as a bug here and here, though unfortunately there is no mention of a solution beyond plugging the device in to a USB 2.0 port. However, this is not an option for my Mac Mini since all of its ports are USB 3.0.
As such, I am wondering whether there is any way to force a USB 3.0 port to function as a USB 2.0 port? Failing that, would anyone have any ideas of other possible workarounds? Note I have attempted all the possible fixes/workarounds listed in the first answer to this question on askubuntu that I was able to -- I didn't set "XHCI Pre-Boot mode", for example, since AFAIK Apple provides no mechanism for changing BIOS/UEFI options.
As a final note, I am fairly certain that I am not facing any fundamental hardware limitation that would prevent this setup, since I have been able to use the same scanner with the Mac Mini from inside OSX.

How would I test this out? Would blacklisting xhci-hcd cause ehci-hcd to be loaded automatically as its replacement?
EDIT: I blacklisted xhci-hcd, updated my initramfs and rebooted. xhci_hcd was gone from lsmod, and ehci_hcd had been loaded, so that all seems to have worked. However, now when I run scanimage, for example, I get
# scanimage > out.pnm
scanimage: no SANE devices found
and lsusb can no longer see the scanner (and for that matter can't see an external HDD I have plugged in either).
Last edited by 12qu (2014-07-27 10:37:11)

Airport Extreme- anybody have a workaround for the lack of Wake on LAN ?

I've read in a number of places that the Airport Extreme (and other Apple routers) don't allow for the standard Wake on LAN packet to wake a sleeping Mac.
Does anybody know of a workaround for the Airport Extreme that might allow for waking a sleeping Mac on the LAN remotely ?
Thanks,
Ed

Does anybody know of a workaround for the Airport Extreme that might allow for waking a sleeping Mac on the LAN remotely ?
There isn't any easy solution, but one possible method was posted here.
(41986)

Best workaround for editing long AVCHD clips in CS6?

Hi there, I've recently switched to CS6 and have run into incredibly long render times using native AVCHD clips (13 hours to encode a 30 minute m2v). After reading many posts it seems the issue I am running into is a known bug. So, my question is: is there a good workaround for this issue?
It sounds like this issue is only on long clips. Is it possible to automatically split the .mts files using another program (virtualDub?) prior to importing?
If transcoding from the native format is required (until the fix) what would be the best method using Windows 7 64bit? I have heard Avid's DNxHD is a good lossy codec, but I hate to do this if there is an accepted workflow I should learn instead.
Thanks for any advice!
-Stephen

One of these message threads may have some help
CS6 Bug AVCHD http://forums.adobe.com/thread/1004369?tstart=0
-and http://forums.adobe.com/thread/1004369?start=0
-and LOCK the media http://forums.adobe.com/thread/1077245

Possible workaround for CSCed41207

Similar Messages

Maybe you are looking for