Post 2010-005 security update freshclam now complains

I applied the 2010-005 security update to 3 of our Xserves. These invoke freshclam via a cronjob (/usr/bin/freshclam --no-dns --quiet). Post security update we now get this output mailed to us after the cronjob runs:
LibClamAV Warning: Cannot dlopen libclamunrar_iface: file not found - unrar support unavailable.
We still get our updates. Cannot locate libclamunrar_iface via locate. Google shows the problem occurring on linux distros but I'm not finding a direct reference for mac os x.
I'd like to stop these messages as they're spamming our log mailbox and indicative of something not being right with clam. Any ideas as to why the security update prompted this (aside from the update including a new version of clamav)?
-Warren

Same message in log here when I run freshcam --version on the command line or when I change the virus database update frequency using Server Admin for the Mail service (causes restart via launchd):
Sep 15 22:42:44 xxxx com.apple.launchd[1] (org.clamav.freshclam[58]): Exited with exit code: 2
Sep 15 22:42:44 xxxx org.clamav.freshclam[22827]: LibClamAV Warning: Cannot dlopen libclamunrar_iface: file not found - unrar support unavailable
Sep 15 22:42:44 xxxx org.clamav.freshclam[22827]: ClamAV update process started at Wed Sep 15 22:42:44 2010
Sep 15 22:42:44 xxxx dovecot[57]: SIGHUP received - reloading configuration
Anyone??
Message was edited by: Apple Martin
Message was edited by: Apple Martin

Similar Messages

Fans acting up after 2010-01 security update

Hi there,
My MacPro (2,1) 8-core (16Gb) has it's fans acting up after the 2010-01 security update. This update came together with an update for Java. Being aware of the possibility that problems can rise when updating the two at the same time, I ran the security update first, then a restart, checked permissions, a restart and then the Java update and checked permissions again. However, now with only Safari or just the finder running the fans act up after a while. Even with the simplest tasks like opening a folder or dragging something or just running idle. It's not full blast but fast enough to be annoying.
I've done a SMC reset in conjunction with a 15min detachment of all cables, booted a few times in SafeMode, but no result. I hoped the 2010-02 security update would fix it but again no luck. Any ideas?

I've looked in the Activity Monitor (I hardly use it) and it gives me some strange data. Like Airport-BaseStation is running.
I don't have an Airport Base Station either, and Little Snitch is always asking if I want to allow it to phone home. So, mine must be running, at least sometimes, in the background also.
Sorry, don't have a real clue about this, but here's some other stuff to try.
First, see if this fan revving up happens in a new admin account and try a Safe Boot. Hold shift key down at startup chime. It will take some time to boot; let it go, it's doing some checking and repairing. The reboot into normal bootup will be slower than usual also.
if it were happening to me, I'd throw Applejack at it; must be from Single User, which BTW, is generally, a safer way to clear some caches. After it's installed, start up in Single User (CMD-S) and type in applejack and follow the on screen instructions for caches and pref files. Don't run anything out of order. If that doesn't do it, then you could try it in deep cache cleaning mode by typing in applejack AUTO.
You may not see the benefits until after several restarts, and since caches are made to speed things up, you may see some temporary slowness until these are rebuilt. If you run it in "Deep," you'll probably be asked to reauthorize some applications, which now think they're being opened for the first time.
Even if it doesn't help this time, it's a very useful tool to have on hand.
Download
http://applejack.sourceforge.net/
Read
http://reviews.cnet.com/8301-13727_7-10334620-263.html?tag=mfiredir
Message was edited by: WZZZ
Message was edited by: WZZZ

I just installed the latest Security update and now I can't open iPhoto. I keep getting a message that it quit unexpectedly because of a problem with the scene kit plugin. I have no access to my photos.

I just installed the latest security update and now I cannot access iPhoto. I keep getting a message that it quit unexpectedly due to some conflict with the Scene Kit plugin.
I'm using a Macbook Pro Mavericks Version 10.9.5

Probably the reboot used to log into the Guest account and then your account again fixed the problem. If often will.

Occasionally can't send mail after 2007-005 security update

Mail gets stuck in Outbox on occasion after installing 2007-005 security update. Need to quit Mail and restart for mail to be sent. I am using Google mail.

What are your smtp mail server settings?
Lots of trouble with people using smtp.mac.com on port 25 in the last week. If that is your setting, change to port 587.
If you don't use smtp.mac.com, disregard this advice.

I used Software Update to install security update. Now Mail can't open.

I used Software Update to install security update. Now Mail can't open. I get a message saying that Mail can't run with my system.
Computer is imac 2.8 GHz Intel Core 2 Duo running 10.6.8
Thanks.

See
https://discussions.apple.com/thread/4311280?tstart=0

TA21328 I downloaded a security update and now I cannot access my online banking web site. How do I fix it?

Does anyone have a quick fix for this? I downloaded the latest security update and now I cannot access web page for online banking.

It is not asking what part of your country you are in, but what country/region you are in.
Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
http://support.apple.com/kb/HT2397
Once you have set the region in DVD Player five times it cannot be changed.
Instead, use VLC to view videos from different regions:
http://www.videolan.org/vlc/download-macosx.html

2014-005 Security Update will not install

2014-005 Security Update will not install "encountered unexpected error" message at end of install routine

Thanks for the quick response.
I had already done that when it didn't load install completely from the app store notice. It goes all the way to the final part of the installation including moving things in place etc, but a the very last moment it says "Installation failure - An unexpected error has occurred. Contact your software vendor."
I've never had any kind of situation like this with any installs, updates, or anything. Everything else is completely up to date. Steve.

Macbook dies after 2008-005 security update: even hardware test not working

My Macbook no longer boots after installing security update 2008-005. Behaves as if HD is dead, AND as if boots from SuperDrive are broken too.
Sequence of events:
1. 10.5.4, Software Update notifies me of update.
2. I permit it. Immediately requires a reboot.
3. Go away for several hours.
4. Upon return, I notice the Leopard outer-space background.
5. Spinning beachball when I move the mouse.
6. Go away for several minutes.
7. Return. No change. Power down computer.
OK ... by now, you may be saying that it might still have been updating and I shouldn't have interrupted it.
But since then, the machine behaves not only like the disk is dead, but I can't even get a hardware test to run from DVD.
So, to continue.
8. Start machine again. Apple boot sound. Nothing on screen.
9. After a while, flashing "folder" icon with question mark.
Since then I've attempted to boot in safe mode, verbose mode, FireWire target disk mode (against a 10.4.x box), boot from original install disk, boot into hardware test mode from original install disk. None of these things worked. I've reset the PRAM.
The only diagnostic activity of all of these that has produced any different feedback is the PRAM reset (which sounded the Apple boot sound a second time). Everything else does not work. If the HD was dead, I could understand that none of the attempts to boot into FireWire target disk mode, or to boot from DVD and then expect to see the HD mount in some way, would work. But since it doesn't even boot the hardware test from the DVD, I'm really baffled. Any ideas? Thanks.

Well, my solution was to buy DiskWarrior and copy what I could (which was a lot, thankfully) to a FireWire external disk, then reinstall. DiskWarrior reports S.M.A.R.T. status OK, so I've gone with a fresh partition in Disk Utility and successfully installed 10.4 from the original DVDs.
Have also run Apple Hardware Test and had no problems, so I've decided to trust the drive in the short term.
Unfortunately, now, 10.5 upgrade disks won't finish and guess what ... a partial install of 10.5 breaks the 10.4! So, the machine has a recognizable startup disk but justs sits in a loop rebooting itself, presumably as it hits some inter-10.4/10.5 state and gives up.
Next up I tried to restore my 10.5 from a wired ethernet connection to my Time Capsule. Having never once been able to browse my backups in Time Machine under 10.5, I was somewhat surprised to find that the 10.5 Installer was happy to let me try a restore from the Time Capsule. It crunched away until it was happy that I had enough space on my new partition, and then did what seemed a pretty instantaneous restore. The Macbook reboots and ... can't see the startup disk.
Maybe my disk really is on the way out.

New Security Update and now apple based programs will not run

I recently downloaded and installed the new security update. I also attempted to download the safari 3.1 update, but an error occurred during download. After restart, iTunes, Mail, Safari, Installer and iMovie will not start (Quicktime will start). The applications from bar and from applications folder will not launch. All third party apps seem to work (I used Explorer 5.2-which I found hidden in one of my folders- to download firefox which I am using now)
I have tried:
-Reinstalling most recent Leopard Update (10.4.11), which fails to even start because Installer crashes
-Deleting preference files
-Using disk utility
-Booting from safe mode and single user mode
-Running repair permissions from prompt screen (command-s)
-"Problem Report for Installer" reads:
"Symbol not found: __ZN3KJS11Interpreter4markEv
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
/System/Library/Frameworks/WebKit.framework/WebKit
Model: PowerMac4,2, BootROM 4.4.0f1, 1 processors, PowerPC G4 (2.1), 800 MHz, 512 MB
Graphics: NVIDIA GeForce2 MX, GeForce2 MX, AGP, 32 MB
Memory Module: DIMM0/J12, 256 MB, SDRAM, PC133-333
Memory Module: DIMM1/J13, 256 MB, SDRAM, PC133-333
Modem: Dash2, UCJ, V.92, 1.0F, APPLE VERSION 2.6.6
I searched for JavaScriptCore, and it was no where to be found. I have yet to reinstall the system software because I would like to know what caused this. I am not great with computers but I catch on quick. Please help.

I found the java script. Hard drive>System>Library>Frameworks>Java Script Core.
Ray

Security Update 2009: Now Photoshop License Is Gone!

HELP!! The last time Software Update ran, it installed a new Security Update. Since then, a bunch of my apps have stopped working. My brand new Adobe CS4? Useless; the software won't launch because my licensing is suddenly no good. Virtual PC? Useless; the software won't launch because it says my licensing is no good. What happened? Is the Security Update screwed up? If so, how do I un-install the damned thing? I need my Photoshop and my Virtual PC. HELP!!

capedcrusader wrote:
HELP!! The last time Software Update ran, it installed a new Security Update. Since then, a bunch of my apps have stopped working. My brand new Adobe CS4? Useless; the software won't launch because my licensing is suddenly no good. Virtual PC? Useless; the software won't launch because it says my licensing is no good. What happened? Is the Security Update screwed up? If so, how do I un-install the damned thing? I need my Photoshop and my Virtual PC. HELP!!
These issues are probably related to the 3rd party software not being compatible with Leopard.
You can check with them for information.
And until they resolve the issue, you can simply boot into your Leopard DVD and using your TM backup revert to the time just before the security update. It's that simple.

KB Article HT5503 - Post iOS6 Release - Security Update to iOS5?

Per HT5503, IOS6 addresses serious security concerns:
Passcode Lock
Available for: iPhone 3GS and later, iPod touch (4th generation) and later, iPad 2 and later
Impact: A person with physical access to a locked device may perform FaceTime calls
Description: A logic issue existed in the Emergency Dialer screen, which permitted FaceTime calls via Voice Dialing on the locked device. This could also disclose the user's contacts via contact suggestions. This issue was addressed by disabling Voice Dialing on the Emergency Dialer screen.
Passcode Lock
Available for: iPhone 3GS and later, iPod touch (4th generation) and later, iPad 2 and later
Impact: A person with physical access to the device may be able to bypass the screen lock
Description: A state management issue existed in the handling of the screen lock. This issue was addressed through improved lock state management.
System Logs
Available for: iPhone 3GS and later, iPod touch (4th generation) and later, iPad 2 and later
Impact: Sandboxed apps may obtain system log content
Description: Sandboxed apps had read access to /var/log directory, which may allow them to obtain sensitive information contained in system logs. This issue was addressed by denying sandboxed apps access to the /var/log directory.
WILL iOS5 receive any further security updates to address these exploits on iPad 1 (original)?

Yep! It was the last line and it was bolded.
WILL iOS5 receive any further security updates to address these exploits on iPad 1 (original)?

This is IMPORTANT!! New Security Update Available Now!

Gang,
I think Apple has fixed our problems. There is a new Security Update, and it seems to be working. I've been struggling for weeks with my computer, especially with Safari. Get the update. I think it will make a difference. - R.T.

the command in terminal
more /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources/XProtect.meta. plist
should bring as a result something like:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>LastModification</key>
        <string>Fri, 03 Jun 2011 00:13:07 GMT</string>
        <key>Version</key>
        <integer>3</integer>
</dict>
</plist>
If it shows version not 3 or grather (<integer>3</integer>) try to force my Mac to update its malware definitions, I launched System Preferences > Security > General, and then unchecked and re-checked the box in front of "Automatically update safe downloads list."
and tun the command in terminal again to check if it is updated.

Just ran the FREAK security update, and now iMac won't boot

Hello,
Gto major issues here after running the above security patch. I'm on the latest yosemite, on a 2007 iMac, 2.8 extreme. Anyway, the software update seemed to go ok, but, as I always do after updating software, I booted into the recovery drive and ran disk utility. This failed when checking the catalog with an error that the dick couldn't be repaired, back up and restore my files. Exit code 8 ...
when hen I rebooted, the progress bar on the grey screen gets to about a quarter of the way across, and the machine just shuts down.
starting in verbose mode tells me the volume could not be verified
localhost.com.apple.xpc.launchd[1] < Emergency> ...
kext loading now disabled
kext unloading now disabled
kext auto unloading now disabled
kernel requests now disabled ...
killing all processes
cpu halted
and thats it.
Id appreciate any suggestions.
cheers,
kev.

Hi again,
when I ran AHT yesterday ( the short version ) it said there were no problems. However, when I tried the extended test, it froze after about 20 minutes. That reminded me of a previous issue I had with this mac, when the power supply failed : very worried about my 2.8ghz 24in imac
When booting up now, the the mac gets to the grey screen with the Apple logo, and the progress bar gets to about a third of the way across before shutting down. Im now wondering if the power supply has gone, rather than the disk ...
any thoughts on how I could diagnose this one way or the other?
cheers,
kev

I downloaded a Firefox security update and now Firefox won't open. From what I can understand my firewall is most likely blocking Firefox now as it doesn't trust it. I have NO idea what to do next, what firewall I am using or even how to find out. HELP!

I have a MAC. If you can help me please be detailed and patient... I don't know what I am doing!

Tina,
I would go crazy if this was me. You may find this interesting from the customer agreement (to see full agreement go here:Customer Agreement | Verizon Wireless):
"HOW AND WHEN CAN I DISPUTE CHARGES?
If you're a Postpay customer, you can dispute your bill within 180 days of receiving it, but unless otherwise provided by law or unless you're disputing charges because your wireless device was lost or stolen, you still have to pay all charges until the dispute is resolved. If you're a Prepaid customer, you can dispute a charge within 180 days of the date the disputed charge was incurred. YOU MAY CALL US TO DISPUTE CHARGES ON YOUR BILL OR ANY SERVICE(S) FOR WHICH YOU WERE BILLED, BUT IF YOU WISH TO PRESERVE YOUR RIGHT TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING SUCH DISPUTE, YOU MUST WRITE TO US AT THE CUSTOMER SERVICE ADDRESS ON YOUR BILL, OR SEND US A COMPLETED NOTICE OF DISPUTE FORM (AVAILABLE AT VERIZONWIRELESS.COM), WITHIN THE 180–DAY PERIOD MENTIONED ABOVE. IF YOU DO NOT NOTIFY US IN WRITING OF SUCH DISPUTE WITHIN THE 180-DAY PERIOD, YOU WILL HAVE WAIVED YOUR RIGHT TO DISPUTE THE BILL OR SUCH SERVICE(S) AND TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING ANY SUCH DISPUTE."
This may help you also: Arbitration and Mediation FAQs | Verizon Wireless
You can dispute any charges by doing an Arbitration or Mediation. I have never done it, so I can not help much there but this all may get you started.
Let me know if any of this works! Good Luck! Please keep me updated. I really hope they help you.

PHP/MySQL issue after security update 2010-005

Hello,
I run Apache/PHP/MySQL on my MBP for testing Web sites.
After the 2010-005 security update I can't connect to my databases anymore.
I don't know how to fix this, I even don't know where to start looking.
Ideas, anyone?

coloma wrote:
etresoft, thanks for sharing this ... I decided to go with the TriangleJuice suggestion instead for two reasons ... first is that I wasn't sure where to find this launchd file.
There is nothing wrong with TriangleJuice's suggestion. My only issue with creating a php.ini file is that now I have to worry about all those other settings in the ini file. If something else in PHP breaks, I have to figure out if I am the one who broke it.
Apple ships MySQL with MacOS X Server. They probably adjusted the PHP settings to match how they have MySQL setup in MacOS X Server.
For MySQL's, no, Sun's - drat! no, Oracle's part, they still haven't acknowledged the fact that Apple has shipped MacOS X 10.4. MySQL still ships with a Startup Item. If you don't know where the launchd file is, it is because you don't have one. You probably have a MySQL entry in /Library/StartupItems or maybe /System/Library/StartupItems. Startup Items were deprecated in 10.4. Oracle should be creating a file named com.mysql.mysqld.plist in /Library/LaunchDaemons.
Here is what mine looks like now:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.mysql.mysqld</string>
<key>ProgramArguments</key>
<array>
<string>/usr/local/mysql/bin/mysqld</string>
<string>--socket=/var/mysql/mysql.sock</string>
<string>--basedir=/usr/local/mysql</string>
<string>--datadir=/usr/local/mysql/data</string>
<string>--user=mysql</string>
<string>--log-error=/usr/local/mysql/data/Pele.local.err</string>
<string>--pid-file=/usr/local/mysql/data/Pele.local.pid</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
I also don't have a /var/mysql directory and wasn't sure whether I should just create one or if this meant my configuration was different. If you feel like explaining any of this, I'd be curious to know.
You have to create one. Such a directory probably already exists on MacOS X Server. Just make sure it is owned by mysql.
sudo mkdir /var/mysql
sudo chown _mysql:staff /var/mysql
sudo chmod 0755 /var/mysql
[jdaniel@Pele:516] /var $ ls -al /private/var | grep mysql
drwxr-xr-x 3 _mysql staff 102 Aug 26 20:03 mysql
Of course, /var is a symbolic link to /private/var. Long story there.

Post 2010-005 security update freshclam now complains

Similar Messages

Maybe you are looking for