Post Anna browser issue

After loading Anna, the native browser will not open for more than a mere flash of the browser screen, then closes itself. What's the problem and what's the fix. Has anyone else experienced this? If I can't get this damn post Anna N8 figured out VERY soon, I'm bailing for a high end Samsung or HTC Android. Thanks for any suggestions

ABernal wrote:
fardawg wrote:
After loading Anna, the native browser will not open for more than a mere flash of the browser screen, then closes itself. What's the problem and what's the fix. Has anyone else experienced this? If I can't get this damn post Anna N8 figured out VERY soon, I'm bailing for a high end Samsung or HTC Android. Thanks for any suggestions
I have the exactly same issue, I have to use Opera but its not flash enabled
I hope they fix this in the next Belle oficial release
Make a backup of your phone, and then do a hard reset, by entering the code *#7370# on your phone. If a security code is being asked enter "12345"

Similar Messages

N8 Anna browser differences / issues?

A couple of things I've noticed since the Anna upgrade, WRT the browser.
1. When entering text in text windows for some forum posts (it actually works correctly on this forum, but on others I read / post to) the newline button doesn't add a line break. It did using the browser in PR1.2, can't remember the behaviour in PR1.1.
2. When using the PR1.2 browser, I used to double tap on the screen to zoom, which worked very well. This seems to work quite differently in Anna.
Both are notable issues / irritations for me. I suspect 1 is a big / issue - whether 2 is expected or planned behaviour, or not, though I'm unsure.
Truth be told, I've not found anything hugely positive about the upgrade to Anna - all it's brought me is irritations in the differences or things that work differently. Performance and stability seem the same to me - which is to say that it's been good before and after Anna. The difference in look and feel just makes me feel meh. I don't mean to be overly critical, I kind of expected more from it, really.
My N8 (admittedly this is my 2nd - first encountered the bug where it won't charge, nor turn on) has been well behaved, performs well and is stable. Main irritations have been with things like WiFi access being, well, unreliable and flakey - and seemed to be best served with scanning turned off, and WiFi power saving on. Post Anna, that hasn't improved, WiFi is still flakey, and not fully reliable (and there is context, there, I've got plenty of other WiFi devices that are stable, including other mobile phones).
Photo viewer no longer picks up on all my photos any more since Anna (I'd have to move other folders, that worked just fine before Anna). Browser I've not found any benefits, and merely negatives. Portrait qwerty means nothing to me, as I find the landscape one tricky enough to get key presses accepted accurately. Video player seems no better (still no bookmark facility).
3.06 of maps seems the golden release - every beta since has been awful, one way or another - too much removed or configuration options removed, and the app dumbed down (3.08 betas). I've tried 3.07 and both 3.08 releases and in all 3 cases have reverted to 3.06 once I became sufficiently irritated that functionality that I wanted or wanted to configure better had either been removed, or was no longer configurable.
Not sure what's going on with N8 software, but I'm considering imposing a software freeze on myself, because it seems that newer releases are doing nothing more than irritating me in not addressing things that need addressing, and merely tweaking look and feel, and dumbing everything down to make it less of a well usable device.

laffcarl wrote:
Well put
Another Browser issue entering text into forums, that has stopped me using one of the only sites I used to frequent before 'AnnaUpdate!', has the strange effect of sending a line of 'Question marks and maybe the odd square box? (Have tried all font settings)
Also the ?'s and square boxes don't add up to the characters in the message i.e.. a 50 character message will be sent as may be 10 ?'s or sometimes just a few. The annoying thing about it is, it looks fine before and as you send it, but when you look at the message you have sent it's as described and rather sinister looking for the recipient lol.
One step Forward-Three steps Back!...dont even start going on about the flash player lmho...What I need is to be able to butcher the N8's camera into my old N95 then there would be no problems
£400 odd quid for a 12 meg nokia camera, you can get an SLR for that money....But hey wait..."You can't browse the web with an SLR!!"...Oh it's OK, you can't browse it with Nokias Flagship either lmao
*Shakes head in disbelief*
Here's the thing - I'm not a hater - I'm not just looking to bash Nokia. Personally, I'm drawn to their handsets because for me, OVI / Nokia maps is a killer app for me.
All the same, though, and it does really irritate - key things people have been complaining about, still not fixed. Basic functions that people have been wanting from various normal apps not implemented. Yet Anna looks a bit more funky.
Same with the mapping betas - well actually worse - 3.06 for me seems to work very well - practically all the key things working quite well. Not perfect, and certainly could be enhanced.
But the recent betas have been awful - ripped out functionality, removed configuration options, dumbed down functions - but again, it looks more funky. But it all just leaves me with a big "So what?". The newer versions simply don't work as well, are not as capable, and all with some dogmatic opinions expressed as the rationale behind why some things have been removed, some options removed, and some bugs not addressed.
If they'd just focus on getting the stuff that doesn't work well, to work, in the process not remove good features or configuration options that many will want to use, THEN - if they have the time - update the visuals, then fine. But I'm sick and tired with the focus on form over function - it's making me question my entire reason for sticking with Nokia handsets - their mapping app - and I don't want to be told that mapping on phones is due a paradigm shift - I just want it to work well, with the maps updatable and relevant.

Issue while posting using goods issue for delivery type NL

Hello Experts,
I have created an outbound delivery for an intra-company transfer (within same company code) between two plants. The delivery type in NL (replinishment delivery)
When i am trying to post the goods issue from supplying plant, I am getting following error
"Account type K is not defined for document type WL".
Delivery type NL should not be used to issue stock to vendor but I am not issuing it to any external vendor , issuing the stokc only to a receiving plant.
Please help to understand why i am getting this error.
Regards,
Nish.

Hi,
If you are doing an STO Scenario, Check whether you have created the supplying plant as a vendor.
The Vendor Account group should be plants.
Also check whether you have given the plant in the vendor master Purchasing Data - Extras tab in the menu click on add purchasing data & check.
If you haven't assigned this, do the same & create a fresh STO & check.
Hope it will work.
Thanks & Regards,

Using a Mac, Firefox does not allow me to use the vertical scroll bar real-time in Godaddy webmail. It lags and jumps. Godaddy says it is a browser issue. Does not happen in Safari with Mac OS 10.4.11 or on PC w/windows vista.

The problem is not my server (Comcast) as it does not happen on Safari when trying different websites as well as Godaddy.com or my Godaddy webmail. The problem is only when using my Mac OS X 10.4.11 (not my Windows Vista PC) in Firefox. I only began noticing this recently. Godaddy says this is a browser issue with my Mac as they cannot replicate it.
== URL of affected sites ==
https://login.secureserver.net/index.php?app=wbe&clearcookies=1

The problem is not my server (Comcast) as it does not happen on Safari when trying different websites as well as Godaddy.com or my Godaddy webmail. The problem is only when using my Mac OS X 10.4.11 (not my Windows Vista PC) in Firefox. I only began noticing this recently. Godaddy says this is a browser issue with my Mac as they cannot replicate it.
== URL of affected sites ==
https://login.secureserver.net/index.php?app=wbe&clearcookies=1

Posting multiple goods issues against the same delivery

Hello gurus,
We are a fashion apparel company using ECC 6.0 and would like to know if it is possible to post mutliple goods issues against the same delivery?
I will explain the business requirement.
- We create a stock transport order to deliver 400 units of merchandise to on or our retail stores (STO is created and processed to a delivery).
- This information is passed down to our warehouse management system (which is not SAP)
- Our warehouse management system has the ability to split a delivery into multiple shipment when needed. For example, our warehouse may only be able to complete 250 units for our morning shipment and will therefore pick, pack and post this. This will feed back into SAP and process a 641 movement so that the units now show as "in transit". This is needed so that our stores can process the ASN and move the units into their inventory when they receive the merchandise later that day.
- During the afternoon, our warehouse will process the remaining 150 units and will ship this to our store later in the evening or next day.
Currently, we are not able to process another goods issue against a delivery as we close out the delivery during the first goods issue. We would prefer not to have to generate a new delivery for our DC and let them continue to process against the same delivery, but we are unsure how to configure this.
Any help or guideance would be extremely appreciated
Thanks in advance

Hi RJ,
First of all sorry to write such a lengthy reply,In one line if i want to summerize then it is not possible with standard SAP however we can achieve this by writing some piece of code in both the system
AS - IS
               Business process
          From business process point of view you are right that once the pick & pack is in process it is not advisable to create a new delivery document for balance quantity and share the same with WMS as then they have to create a new document in WMS and start picking based on that rather then the old delivery document number. if i am in your position then i can give a thought like this
e.g.
Delivery                                                  - 100 Unit
Shipment confirmation from WMS            -   60 Unit
Change in delievry quanity / Pick qty        -   60 Unit
Invoice from SAP                                    -   60 Unit
Second confirmation from WMS                          -   40 Unit
Change in the existing delivery quantity                -   Now here we have two option either
1) Change the delivery quantity / Pick qty to (60+40) =100 or
2) Remove the 60 and update 40 as delivery and pick quantity
Pros & Cons
if you will select option 1 then furhter invoice will happen for 100 unit which is incorrect as physically you are shipping only 40 unit
if you are selecting option 2 then the document flow is incorrect as you don't have history(in SAP) for the 60 unit which was shipped earlier
Solution ::
so in my opinion the best option is to create a seperate delivery document (store the old delviery number in one of the field of the new delivery and pass the same to custom segment of the IDoc) transmit the IDoc to WMS write the validation logic in WMS
Find the record with old deliver number in the WMS system, check the status whether it is active or inactive
if it is acitive Validate the Material + qty with the WMS record(Material + balance quantity) if both are same then pass the new deliery number to custom field of the WMS table
At the time of confirming back to the SAP, Write a piece of code in SAP that if the incoming idoc custom field(new delivery number) field is populated then ignore the orignal document number and post the document using the new delivery document number
Hope this help

Nokia 500 and Belle Refresh: browser issues.

Greetings.
The Belle Refresh was indeed a welcome refresh for this low-to-midrange phone. However, there is a serious issue with the browser.
With the update to Qt 4.8, you inherited QtWebKit, an amazing browser I know very well. In a desktop, it's fast, although it eats more memory than Firefox. However, in a cell phone like the 500, with limited amounts of RAM, this browser freezes the phone, due to the lack of memory. I'm also sure this browser can and will break phones with more memory and Belle FPx, since I've made QtWebKit use more than 1 GB of RAM in a computer running KDE.
There is a way to avoid this, called "user agent". Opera Mobile avoids this scenario by telling pages through user agent "hey, don't be hard on me, I'm browsing this from a cell phone", and pages adjust themselves to that scenario. However, you didn't tweak the user agent in your browser.
If you add no user agent tweaking, full HTML5 support, Flash Lite support (the much higher specced iPhone 4S doesn't support Flash), and low memory, you get a nightmare scenario.
1. The webpages send their complete, full featured DESKTOP versions to my Nokia 500.
2. QtWebKit supports everything, so, it makes a faithful attempt to properly render the page, even with Flash apps.
3. Nokia 500 has only 70-80 MB of RAM free for apps to use.
4. Boom.
Can you release a hotfix for Belle Refresh, changing the user agent of Nokia Browser to something that can trigger the mobile version of web pages? In that scenario, QtWebKit will eat much less memory and everyone will be happy. And please, can you do this for everyone using Belle Refresh?

I can confirm serious browser issues with the Belle refresh on a C6-01 device. The crash is so severe that only taking out the battery helps. It typically occurs when scrolling larger, feature-rich (and image-rich) webpages, so far I've seen this only on mobile connections (Edge, Umts), but that may be due to lack of testing with WLAN. (Where I've got WLAN I've usually a more powerful device as well..

BAPI to post a Goods issue with relation to Sales Order?

Hi Everyone,
After creating a delivery order, I need a BAPI to automatically post a goods issue for this DO.
I tried using BAPI_GOODSMVT_CREATE but it returns the message 'Goods Movement not possible with mvmt type 601'.
Any advice?
Best Regards,
Junwen

Hi John,
My data are as follows:
GOODSMVT HEADER:
PSTNG_DATE: 30.09.2004
DOC_DATE: 30.09.2004
REF_DOC_NO: had tried 1014000359 or empty
GOODSMVT_CODE: 03
GOODSMVT_ITEM:
MATERIAL: HP0121002
PLAN: 1010
STGE: 10FG
BATCH: BATCH1
MOV: 601
CUSTOMER: 180017
ENTRY_QNT: 1
ENT_UOM: PC
ENT_UOM_ISO: PC
DELIV_NUMB: 1014000359
DELIV_ITEM: 000001
From your feedback, it is possible to use the BAPI to create a goods issue for movement type 601?
Best Regards,
Junwen

Post a good issue against an outbound delivery with movement type 601 K

Hello,
according to my business scenario I need to manage the stock of different vendors into the client's location (plant) at storage location level and I need to post the good issue against an outbound delivery to decrease the stock level.
Since the owner of the goods isn't my client the item is managed only at quantity level (not value) so I'm not interesed in the accounting document.
To do it I'm using the functionality related to the vendor consignment stock but I'm not able to post the good issue against an outbound delivery using the movemement type 601 and the special stock indicator equal to K.
In particular I've tried in two different ways:
- setup the consignment stock indicator (= K) into the sales item category, but when I post the goods issue the system is not able to find out the right vendor
- to create a stock determination rule instead of the setting previous described, but the system display an error message (Fld selectn for mvmt type 601 / acct L534200770 differs for Cost center (010) ) even if the accouting is not relevant in my scenario
Can you suggest me how the system has to be setup in order to cover my requirements?
Thanks in advance,
Alessandro

Hi,
Please clarrify which material type you are using in this scenario? I suggest you to use material type UNBW (no value updation will be there) and create a material master. Use special stock indicator K. Proceed with 601K to do GI. Hope it works. Thanking you.

Error when posting an goods issue of movement type 501: order not contain

I tried to post an goods issue of movment type 501 to a stock transport order. But I get the error as below.
Document 4500000130 does not contain any selectable items
Message no. M7 064
Diagnosis
The document or item entered cannot be adopted.
Possible reasons for this are:
The document items have already been processed
(Suggest zero lines indicator set?).
the document items have been deleted or are blocked.
the document items have been created for a different plant.
(for reservations only) movements are not yet allowed for the reservation items.
(for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
The document is an R/2 document.
Procedure
Make sure your entries are correct.
If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
If the document is a purchase order, production order or a reservation, you can enter search criteria in the dialog box.
You access the dialog box by choosing the menu option Enter with reference on the initial screen.
If the document is an R/2 document, you have to cancel it manually by entering the reversal movement type.
How can I proceed to post?
Thanks,
Eda

Hi
Go to T.code MB1A, enter the required movement type, Plant and storage location and then click,
The push button of Reservation on the tool bar for refereing the reservation or
The push button of order on the tool bar for refereing the Production order.
Cheers
Kris

How to get material's last posting date of issuing to production order?

Hi,
In my scenario, I need to get material's last posting date of issuing to production order (e.g. mov. typ. 261).
I tried to select the material documents whose movement type is 261, and restrict the posting date from month to month each time, until the first material document is selected.
But this method seems quite inefficient.
What kind of algorithm is more effient to do this?
Thanks
Wesley

Hi,
select max( budat )
from mkpf
into gv_budat
where mblnr in ( select mblnr
                     from aufm
                    where aufnr = gv_aufnr "(Prod. Order)
                        and matnr = gv_matnr "(Issued Material)
                        and bwart = '261' ).
Edited by: Azeem Ahmed Matte on Mar 12, 2010 12:33 PM

IWeb pages reverting to older version- not a browser issue, deleting prefs/caches no help

Hi everyone, forgive me if this is a newb question but I've scoured the internet for answers and all of them I've already tried with no luck. I'm using iWeb and encountering a problem that has me completely stumped. I'm trying to publish changes to my site, (I do not use mobileme, I publish to disk and upload files via Fetch) and for some reason something is changing my html files when I try to upload them. The html files are correct on my hard drive when I publish them, and yet when I upload them, they revert to the older version. This is not a browser issue, as I've cleared my cache, refreshed and tried using Safari, Firefox and Chrome with no luck. I've also tried 're-setting' iWeb by deleting iWeb preferences/cache, and tried moving the domain file from application support, creating a new website, deleting it and then re-loading the old site. Nothing, still the old site. It's new in iWeb, new when I open the html files on my drive, and old as soon as I upload.
I seem to remember having this problem before, and what I found was iWeb's cache kept replacing my new pages with the old ones every time I wanted to upload them. 'Re-setting' iWeb did the trick then, but it's not doing it now. Any ideas on what is going on? It's a little disconcerting seeing a file correct on the disk and then change itself, while uploading, into an incorrect version.
Using:
iWeb 3.0.3
Mac OS 10.6.7
Mac Pro 2.66 Dual core

If you make changes to a page there are files in the Scripts folder that get updated and must be uploaded also. Depending on what you're using to up load the files it can be setup to upload just those new or modified files.
Cyberduck is a free FTP client that works very well and if used in conjunction with this tutorial will upload only those new or modified files: #2 - Uploading only those new or newly edited and published files when using a 3rd party FTP client
OT

Upgrade to ECC6 & Unicode: IE Web Browser Issues?

Has anyone experienced web browser issues at display time? We are on IE7. We are now using the internal ITS. Our carriage returns are totally being ignored by the browser. Thus, we have a dropdown box to pick one of the businesses multiple partners, and because the HTML is not formatted correctly in the browser, the dropdown doesn't work, and we get an "array not created" error messsage in IE7.
I know that there are options in the IE 7 browser under the menu item "view". I've tried changing these to some different Unicode settings, but without luck.
Has anybody some experience with this issue?
Thank-You

Hi Tim,
this might be problem with Support package, by default Sap neweaver 2004s application comes with SP6, u can upgrade to higher SP to solve these type of problems.patch your system up to SP12 or SP13 and try.
Thanks & Regards,
Manikandan Dhanakoti
Edited by: Dhanakoti.M on Oct 23, 2009 7:45 PM

Upgrade to ECC6 & Unicode Passing HTML to Browser Issue?

Has anyone experienced web browser issues at display time? We are on IE7. We are now using the internal ITS. Our carriage returns are totally being ignored by the browser. Thus, we have a dropdown box to pick one of the businesses multiple partners, and because the HTML is not formatted correctly in the browser, the dropdown doesn't work, and we get an "array not created" error messsage in IE7.
I know that there are options in the IE 7 browser under the menu item "view". I've tried changing these to some different Unicode settings, but without luck.
Has anybody some experience with this issue?
Thank-You

You mean hex stored as string (0-F)?

Error in posting a goods issue

Hi everyone,
We're encountering an issue with posting. When trying to post a goods issue from a delivery via VL02N, an error message is displayed : "The document does not contain any item.". although it does contain items.
Do you have an idea of why thie error would appear ?
Thanks in advance.

Hello,
Can you check whether
1. you have picked the item,if not then pick the material and goto Edit>Confirm pick order>All items, or
2. activated warehouse management. if yes then you need to create a transfer order with reference to that delivery.
Hope it helps.
Regards,
Priyanka

Posting a "goods issue" msg NR751

Hi All,
posting a goods issue, sap gives me the message NR751...
But the number range has been created ...
I can't post the goods issue
Could anyone help me?
thanks
Gandalf

Ciao Gandalf, ( e' sempre un piacere incontrare un fan del signore degli anelli)
the error NR751 have 3 variables
-> For object &1 &2, number range interval &3 does not exist
Please, go to transaction SNRO and enter RF_BELEG (I suppose this is the object in the error) in the 'Object' field.
In the menu path press Go To -> Number Ranges.
Enter the relevant Company Code. Do you have an entry here for the interval &3?
Mauro

Post Anna browser issue

Similar Messages

Maybe you are looking for