Post Date Wrong

I posted a message on the XML PL/SQL forum and the Post Date was listed as Aug 20, 2001. Why is the date wrong? It should be today's data Sept 7, 2004

I'm afraid I can't advise on the specifics of either. Probably Blogger is the place do start; I can only suggest looking in their Help and/or looking at the settings for the episode - where you put the title and description - and see whether there is a place there for the date.

Similar Messages

  • How to Rectify Goods Return posted in wrong date

    Dear Expert
    Please guide me how to rectify the Goods return posted in Wrong Date.
    Regards
    Rajani patel

    DEAR GORDAN
    I am talking about Purchase Goods Return based on GRPO then how can i rectify it
    Scenario is like this
    GRPO date:10th April 2010 and client has made Goods Return in 21th Sept 2010 instead of same date of GRPO
    Regards
    Rajani P Patel

  • Posting date is wrong in the reversal document in FI document

    Hi All,
    We have one issue related to Posting date. We need your valuable feedback on the same:
    Issue:
    There are some documents which reversed in the month of Mayu20192010 but the posting date is coming as Marchu20192010 which is very strange.  The Original documents posted via transaction code F110 in the month March and reversed in the month May but the posting date of the reversal document is coming as March which is NOT correct.
    Analysis:
    Our first analysis is that, the posting of Original document happened when the system was in 4.6 version and reversal happened after ECC go live. We are not sure if that could be the reason.
    Secondly, we checked the change log of transaction code OB52 but there is no change for the posting period 3 in the month of May.
    Thirdly, we tried to replicate the same scenario in our development system but here we are getting the error that Posting period is not open which is correct.
    Request you to please look into it and provide you input.
    Thanks.
    Regards,
    Ajay Kumar Tiwari

    Hi,
    By any chance, did the user enter march date in FB08 screen ?
    Best Regards,
    Madhu

  • Reversing A/P Invoice posted with wrong date and inventory cost adjustment

    Here's the situation:
    We had a PO dated 9/1/09 for items with a cost of $14.50, a Goods Receipt was entered 9/15/09 for the items with the same cost on the PO of $14.50.  Somehow the order got lost in the mix and the AP invoice wasn't entered until today, with a posting date of 1/21/10 and the cost was corrected per the original vendor invoice to the right amount of $19.33.  The invoice was actually dated 9/15/09.  This resulted in hitting the vendor, purchases clearing and the inventory account (for the cost adjustment) in January 2010 when it should have occurred in September 2009.
    The inventory itself has come and gone in the time between the GR and when the invoice was done with the incorrect date.  Normally I would try to reverse the transaction with a Credit Memo and start over, however since the inventory side happened so long ago, I don't see any way of easily going backwards.  I thought about doing service CM/invoice but what I am most concerned about is having the inventory valuation occur properly at the correct time.  I'm not sure how to go about this.
    Using SAP B1 2007A PL42 with moving average inventory.
    Any thoughts would be appreciated.

    Nicole,
    I am afraid you may not have ability to do the adjustment based on historical date that long times ago.  You know, the moving average has limited calculation based on current quantity and cost.  There are no options to go backward especially new year is coming.
    Thanks,
    Gordon

  • 2lis_02_scl extract records with wrong posting date for Good Receipts.

    Hi Experts,
    We are currently having issue of mismatch between BW Schedule Line data with R/3 values for the Goods Receipts posting date updating incorrectly in to BW.
    Example.
    In table EKBE purchase order history we have following records.
    MANDT EBELN        EBELP   ZEKKN VGABE GJAHR BELNR      BUZEI BEWTP BWART BUDAT      MENGE
    501   5600453404   00010   00    1     2010  5012473031 0001  E     101   23.01.2010        1.250,000
    501   5600453404   00010   00    1     2010  5012473031 0002  E     101   23.01.2010        1.250,000
    501   5600453404   00010   00    1     2010  5012473031 0003  E     101   23.01.2010        1.250,000
    501   5600453404   00010   00    1     2010  5012693310 0001  E     101   26.02.2010        1.250,000
    Which means we have on posting date of 23.01.2010 1250*3 i.e. 3750 quantity of Goods Receipts.
    However when we check the extractor we get multiple records in internal table C_T_DATA and in psa.
    Line BWV ETENR   SLFDT              MENGE    ROCA BEDAT                            BUDAT          EBELN
           ORG                                                        NCEL
    1     001     0001     20100125     3750.000          20100113     ZNB     F     00000000     5600453404
    2     001     0002     20100226     1250.000          20100113     ZNB     F     00000000     5600453404
    3     002     0001     20100125     3750.000     X     20100113     ZNB     F     20100123     5600453404
    4     002     0001     20100125     3750.000          20100113     ZNB     F     20100123     5600453404
    5     003     0001     20100125     3750.000     X     20100113     ZNB     F     20100127     5600453404
    6     003     0001     20100125     3750.000          20100113     ZNB     F     20100127     5600453404
    7     002     0001     20100125     3750.000     X     20100113     ZNB     F     20100226     5600453404
    8     002     0001     20100125     3750.000          20100113     ZNB     F     20100226     5600453404
    9     002     0002     20100226     1250.000     X     20100113     ZNB     F     20100226     5600453404
    As can be seen we have record no 8 for ETENR (Schedule line 1) with posting date 26.02.2010 and another record with posting date 23.01.2010.
    Since we are getting 2 records the record with incorrect posting date overwrites the record with correct one.
    Any idea if this could be a standard extractor problem or any other way to resolve this issue.
    Any help would be appreciated.

    First of all, are you using a staging DSO? (You should ideally)
    If yes, is it a Write Optimized DSO? (Again, this is ideal)
    If its a standard DSO, the values maybe over-writing upon activation.
    You have 3 records (quantity = 1250 * 3) that have been receipted on 23.01.2010, where Posting Date = 23.01.2010.
    You also have a record (quantity = 1250 * 1) that has been receipted on 26.01.2010. Posting date = 26.01.2010.
    Now, in RSA3 & in PSA you can see more records than intended.
    This is because you have before & after images. (ROCANCEL = X or blank).
    ROCANCEL = X --> Before Image (record before change)
    ROCANCEL = blank --> After Image (record after change)
    This is a standard property of the extractor.
    Now, we also have something known as BWVORG (Process Keys). Each process, i.e. creating a PO, Goods Receipt, Invoice etc.. have different Process Keys.
    Creation - 001
    Goods Rcpt. - 002
    Invoice - 003
    We can see that record 8, i.e. BWVORG = 002 (GR) has been modified on 26.01.2010.
    That is why there is before image and after image.
    Which one should be the correct posting date? 23.01.2010?
    Normally in a Write optimized DSO, you will have all the records (before and after images & others as well).
    I hope this helps.
    Please let me know if otherwise.

  • Asset Value Date - Wrong posting

    Dear All,
    Company code is on live, Assets legacy data taken as on 31st-March-09.
    Later we find that some of the assets [new purchases, in previous fiscal year (2008)] was not posted.
    For that recently we posted that transactions F-90 using posting date is current date and document date is Actual acquisition date.
    Due to document date in previous fiscal year system taten posting date as asset value date.   So, depreciation posting missing for previous year.
    I need your help.  How can I rectify this???
    Other than reversing the existing posting, what is the scenario????????
    Thanx
    Regards
    partha

    Hi,
    In order to post ,post capitalization please closed the previous asset accounting year.In ABNAN T.Code screen please update the original val date field with the date  of the previous year from where you need to start calculating the dep. Doc date and posting date should be of the current FY.Also check T.Code Ao90 for updating the field Revenue from post capitalization with proper GL Account.
    If your statutory audit for 2008-09 is not yet completed then you can think about T.Code AS91.While  using T.Code ABNAN the following line items are generated.
    Asset        dr
    Acc Dep         cr
    Rev form post capitalization cr
    The system will only calculate dep of previous year.For the current year dep which are yet to be posted will be posted in the next schedule dep posting run.
    Thanks
    Monoj

  • Updated a post - now post date is wrong in iTunes

    Hi, I made some changes to a few of my blog posts connected with my podcast feed. Now the dates in iTunes podcast store show the date of the change and not the original post date. How can I get the date back to the original. Thanks!

    I'm afraid I can't advise on the specifics of either. Probably Blogger is the place do start; I can only suggest looking in their Help and/or looking at the settings for the episode - where you put the title and description - and see whether there is a place there for the date.

  • Getting at POST data from a pl/sql procedure through Path Aliasing

    Hi.
    I have mod_plsql configured with "path alias" and "path alias procedure" so that the request ends up in my
    procedure and i have the remaining path in p_path. This is what I want.
    http://<domain>/<dad>/<myalias>/<p_path>
    My question is; is there a way at this point to get at POST data in the request? I haven't been able to find
    any way of doing this looking through the documentation. Is the body of the request lost at the gateway
    (mod_plsql) using path alias?
    If so, is there some other way to achieve something like !myproc(name_array [somearr], value_arr [somearr])
    where the first entry in the arrays is an eqvivalent to p_path?

    Billy  Verreynne  wrote:
    Øyle wrote:
    I have mod_plsql configured with "path alias" and "path alias procedure" so that the request ends up in my
    procedure and i have the remaining path in p_path. This is what I want.
    http://<domain>/<dad>/<myalias>/<p_path>
    My question is; is there a way at this point to get at POST data in the request? Do not understand the question as a POST and GET are simply two different methods that a web browser submits a URL and data. There is no "+path+" involved here.Thank you for answering. I think the confusion is because you disregard what I said about "path alias" and "path alias procedure".
    Those are configuration of the mod_plsql gateway so that any URI containing <myalias> above is directed to the procedure stated
    by "path alias procedure". The gateway also sends any remaining parts of the URI to this procedure as an varchar2 argument (p_path).
    My problem is that I see no way to get at any POST data as the signature of this procedure has to be this one varchar2, and I don't
    know any other way to get at the body of the request.
    >
    If so, is there some other way to achieve something like !myproc(name_array [somearr], value_arr [somearr])
    where the first entry in the arrays is an eqvivalent to p_path?If you want to know what the URL is, the full path used, then you need to look at the CGI (Command Gateway Interface) environment. The web server builds a list of CGI variables. These include the type of web server, the URL, the type of HTTP command (GET or POST), and so on.
    Within your PL/SQL web procedure, you can query these CGI variables. Have a look at the function OWA_UTIL.GET_CGI_ENV in the [Oracle® Database PL/SQL Packages and Types Reference|http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/w_util.htm#i997269] guide.
    Take a look at CGI variables such as PATH_INFO, PATH_TRANSLATED, SCRIPT_NAME and so on.Yes, thank you, but my problem is a bit upside down. I do use the cgi environment to get the method and I have path as input, what I can't
    find is the body of the request. I might be approaching this entirely the wrong way. It might be a bit easyer to understand if I state that I'm
    trying to find a way to implement a RESTfull service in pl/sql.

  • Posting date and posting periods

    HI Experts,
    I am practicing IDES for SD. While using T VL02N for post good Issue I got this error:
    <b>Posting only possible in periods 2006/12 and 2006/11 in company code 1000
    Message no. M7053
    Diagnosis
    The posting date entered is not within one of the permitted posting periods (current period/previous period).
    This can be due to one of two reasons:
    The correct current period has not been set in the system.
    For the system, the first of the entered periods is the current period. At the beginning of a new period, your systems administrator must change the current period in the material master record, using the function "Shift periods". This has not yet been done.
    You have entered a wrong date in the field "Posting date".
    Procedure
    Check the posting date and correct it if necessary. If your input is correct, inform your systems administrator that the "period shifting" (period-end closing) process has not yet been completed. Copied from M8022</b>
    I don;t think there is problem with my posting date. Can someone guide me on how solving this
    Thanks
    Yael

    Go to OMSY and check the periods are current peiods or not to ur comp code?
    If it is not the current period.
    close the posting period by going to MMPV.
    let us say comp code EG, YEAR-2006  PE-6
    so you have to close the posting periods for all months till this month.
    from comp code-EG
    To comp code- EG
    period-7
    fiscal year-2006
    repeat the same but with period-8(month) 9,10,11,12,
    and do the same for 2007 too till you get the current month in OMSY T-Code.
    you need to do close the period end of every month.
    thank you
    chaitanya

  • Currency translation - based on posting date

    Hi everyone..
    im again posting this topic bcos im in need of a solution for my problem as early as possible.please excuse me.
    Problem related to currency conversion:
    Im taking a report from sales order and billing cube,and the report is coming fine,but when i apply the currency conversion type,it is not giving the correct conversion.
    In report,im using exchange rate on document posting date.
    So if i compare the value in R/3 with the reporting value,the difference comes.
    For the currency conversion type i used, i checked in rrc2,it is like this.
    Exch rate type:M-standard translation at avg rate
    Source curr:from data record
    Tgr curr:selection with translation
    Time ref:Varoiable time reference:A-To the exact day
    Special Infoobj:Posting date object
    So what could be the problem for the wrong translation.the difference is about 1.2 rs per dollar.
    i will be verymuch thankful to u,if u could give some solution for this problem...
    thansk & regards
    sudha

    Hi
    Please check if you are transferring exchange rates maintained in R/3 to BW on daily basis or as & when change happens on R/3 side.
    If not then you can do that in RSA1->source systems-> here select your R/3 system ->right mouse click-> Transfer global settings-> in next screen put check box ON for currencies and then using update tables option button. For daily scheduling, go to top menu ->Program-> Excute in background-> here you can schedule this as daily job.
    Hope this helps
    Regards
    Pradip

  • Material consumption posting date before MIGO

    Hi,
    I have one issue related to Material Consumption....
    If material received and posted on 25.12.2011 then how come system is allowing to consume ( Mtype 261) on 12.12.2011.  As material stock on 12.12.2011 is Zero.  We have not allowed Negative Stock Posting for Plant or in Material.
    We are consuming material for Production Order with in CO11N with Mtype 261.  Material phisically received on 12.12.2011 and we used it but due to some problem we are not able to do MIGO.  Now problem solved and MIGO posted on 25.12.2011, so we entered confirmation of production order with posting date 12.12.2011 and system is allowed to consume the material and now account reports shows nigetive values on 12.12.2011.
    can anybody focus on this issue......

    SAP checks only if there is enough stock in the period (month) not at a certain day (for performance reasons)
    Dont blame SAP, Why has your user posted the goods issue with an earlier date?
    Usually they do it because it was the date the goods issue happened physically, I have rarely seen users that user changing posting dates to fraud the system.
    was the GR eventually posted with  a wrong date?

  • Posting date doubt - FI _GL extractor

    Hi friends,
    I have to load data from ods to cube.
    In the ods,the requests request date is :10.07.06 and update date:11.07.06.
    I have already loaded data with the selection condition,posting date till 30.06.2006.
    Now i have to load the remaining records.
    I don know how to give the selection date???
    The request in the ods is  init request and is updated using 0FI_GL_4.
    That init load was scheduled on 10.07.06.
    at 10.38.46.
    so what i guess is,till that time whatever doc has been posted in R/3 will be in the init request....(correct me if im wrong).
    And the init is finished in bw on 11.07.06.
    So do i need to use 01.07.06 to 11.07.06 as my selection option in the infopack???
    Regads
    ragu
    So to load data

    Hi Ragu,
    The posting date and the updated date that you find in the "manage" of the cube are different dates. You would need to load the data for the selection conidion 01.07 to 11.07 .
    Bye
    Dinesh

  • Posting date problem

    Dear cons
       I made the goods receipt on 16.10.2007. I made the goods issue by mistake on 01.10.2007( instead of 01.11.2007). but the system accecpts it. so when I saw the stock on posting date(T-code mb5b) the system gives wrong information. How can I solve it. pl. give me all the details.
    thanks
    nirupama

    Hi Nirupama,
    Use Tcode:
    MBST________MATERIAL DOCUMENT NO.
    CANCEL  IT.
    AGAIN GO FOR A FRESH GOODS ISSUE.
    REGARDS,
    ASHOK

  • How can I send post data through nsurlrequest?

    Hi.
    I'm working on an application which needs to make requests to a php gateway. I tried many examples I found on google, but none of them worked for me.
    First I was working with GET, and it worked just fine, but now, as I need to send more complex data, GET isn't a solution anymore. I have three params to send: module which is a string containing a php class name, method: the function in the class, and params for the function which is usually an indexed array.
    The following method makes the request to the server, but for some reason, doesn't send the POST data. If I var_dump($_REQUEST) or var_dump($_POST), it turns out, the array is empty. Can somebody tell me, what am I doing wrong? Is there some kind of a sandbox, which prevents data from being sent to the? I also tried to send some random strings, which aren't json encoded, no luck. The sdk version is 5.1, and I'm using the iPhone simulator from xcode.
    If it is possible I would like to solve this problem without any additional libraries (like asihttp).
    And here is the code:
    +(NSObject *)createRequest:(NSString *)module: (NSString *)method: (NSArray *)params
        NSString *url       = @"http://url/gateway.php";
        NSData *requestData = nil;
        NSDictionary *data  = [NSDictionary dictionaryWithObjectsAndKeys:
                module, @"module",
                method, @"method",
                params, @"params",
                nil];
        NSString *jsonMessage = [data JSONRepresentation];
        NSMutableURLRequest *request = [[NSMutableURLRequest alloc] initWithURL:[NSURL URLWithString:url]];
        NSString *msgLength = [NSString stringWithFormat:@"%d", [jsonMessage length]];
        [request addValue: @"text/xml; charset=utf-8" forHTTPHeaderField:@"Content-Type"];
        [request addValue: msgLength forHTTPHeaderField:@"Content-Length"];
        [request setHTTPMethod:@"POST"];
        [request setHTTPBody: [jsonMessage dataUsingEncoding:NSUTF8StringEncoding]];
        requestData     = [NSURLConnection sendSynchronousRequest:request returningResponse:nil error:nil];
        NSString *get   = [[NSString alloc] initWithData:requestData encoding:NSUTF8StringEncoding];
        NSLog(@">>>>>>%@<<<<<<",get);
    Thank you.

    raczzoli wrote:
    I'm working on an application which needs to make requests to a php gateway. I tried many examples I found on google, but none of them worked for me.
    Why not?
    Unfortunately, you are dealing with a number of different technologies that have been cobbled together over the years. You could write a PHP server that would respond correctly to this request, but not using basic methods like the $_POST variable. PHP was designed for HTML and true forms. What you are trying to do is make it work as a general purpose web service over the HTTP protocol. You can do that, but not with the form-centric convenience variables.
    The following is a basic program that will populate the $_POST variable.
    #import <Foundation/Foundation.h>
    int main(int argc, const char * argv[])
      @autoreleasepool
        // insert code here...
        NSLog(@"Hello, World!");
        NSString  * module = @"coolmodule";
        NSString * method = @"slickmethod";
        //NSArray * params = @[@"The", @"Quick", @"Brown", @"Fox"];
        NSString * params = @"TheQuickBrownFox";
        NSString * url = @"http://localhost/~jdaniel/test.php";
        NSDictionary * data  =
          [NSDictionary
            dictionaryWithObjectsAndKeys:
              module, @"module",
              method, @"method",
              params, @"params",
              nil];
        //NSString *jsonMessage = [data JSONRepresentation];
        //NSData * jsonMessage =
        //  [NSJSONSerialization
        //    dataWithJSONObject: data options: 0 error: nil];
        NSMutableArray * content = [NSMutableArray array];
        for(NSString * key in data)
          [content
            addObject: [NSString stringWithFormat: @"%@=%@", key, data[key]]];
        NSString * body = [content componentsJoinedByString: @"&"];
        NSData * bodyData = [body dataUsingEncoding: NSUTF8StringEncoding];
        NSMutableURLRequest * request =
          [[NSMutableURLRequest alloc] initWithURL: [NSURL URLWithString:url]];
        //NSString * msgLength =
        //  [NSString stringWithFormat: @"%ld", [jsonMessage length]];
        NSString * msgLength =
          [NSString stringWithFormat: @"%ld", [bodyData length]];
        [request
          addValue: @"application/x-www-form-urlencoded; charset=utf-8"
          forHTTPHeaderField: @"Content-Type"];
        [request addValue: msgLength forHTTPHeaderField: @"Content-Length"];
        [request setHTTPMethod: @"POST"];
        //[request setHTTPBody: jsonMessage];
        [request setHTTPBody: bodyData];
        NSData * requestData =
          [NSURLConnection
            sendSynchronousRequest: request returningResponse: nil error: nil];
        NSString * get =
          [[NSString alloc]
            initWithData: requestData encoding: NSUTF8StringEncoding];
        NSLog(@">%@<",get);
      return 0;
    I have written this type of low-level server in PHP using the Zend framework. I don't know how to do it in basic PHP and wouldn't bother to learn.
    Also, you should review how you are sending data. I changed your example to send the appropriate data and content-type for the $_POST variable. If you had a server that could support something else, you could use either JSON or XML, but your data and content-type would have to match.

  • Error while posting data from SCM to XI

    Dear Expertise,
    I got a requirement where I need to post data from SCM to XI server. From SCM
    side it is an ABAP proxy. When I tested the scenario and checked in the MONI of
    SCM I got an error. But SCM is correctly configured pointing to XI under Tcode
    SM59 (SM59 --> Connection Type H (HTTP Connection to ABAP System) -->with
    correct user credentials and PIPE line URL of XI server).
    Please let me know is this the correct settings for ABAP proxy for connecting
    from SCM system to XI system.
    Error Dump in SXMB_MONI:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Integration Server
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
      <SAP:P1>401</SAP:P1>
      <SAP:P2>Unauthorized</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
    <SAP:AdditionalText><!DOCTYPE html PUBLIC"-//W3C//DTD HTML 4.01Transitional//EN">
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>HTTP response contains status code 401 with the description Unauthorized Authorization error while sending by HTTP (error code: 401, error text: Unauthorized)</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Thanks in Advance,
    Gujjeti

    HI
    Check these
    For Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
    Description: The request requires user authentication
    Possible Tips:
    • Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
    • If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
    • If the error is in Adapter Engine
    –then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
    • May be wrong password for user XIISUSER
    • May be wrong password for user XIAFUSER
    – for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message

Maybe you are looking for