Post-deployment configuration failed error in windows 2012 server

HI,
After complete install WSUS I am getting post-deployment configuration failed error
WSUS files are not installed in given path even folder also not created
kindly suggest to me

Just start from this bit
There are a few workarounds to this problem so that we can complete the WSUS role Installation and move on to bigger and better things with Config Man.
The easy way would be to launch the WSUS admin console. You will immediately get prompted for the post installation tasks. You just populate the fields and you are done.
Cheers Paul | http://sccmentor.wordpress.com

Similar Messages

Error Code (Windows 2012 server DataCenter Edition) :0xC004F069

When I am trying to activate windows 2012 server datacenter edition, an error message is showing. "the software licensing reported that the product SKU is not found". what is SKU?
how to solve this problem?

SKU = Stock Keeping Unit (an industry term, meaning the reference number for a unique specific part number or product identity)
-=-=-
from: http://technet.microsoft.com/en-us/library/cc303695.aspx
Error Code: 0xC004F066
Error Message: The Software Licensing Service reported that the product SKU is not found.
Activation Type: MAK/KMS client
Possible Cause: Volume media has been used with a non-Volume key.
Troubleshooting Steps:
- Match the product key to the OS edition.
- Contact the Product Activation Call Center for assistance.
-=-=-
This suggests that you are using an invalid combination of product key/installation media.
Check that you are using a "matched set", either Retail media with Retail key, or, Volume media with Volume key.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Configure IE ESC in windows 2012 server

where

Hi,
I would agree with Dave Patrick, you could use Server Manager to enable or disable IE ESC.
http://4sysops.com/archives/how-to-disable-internet-explorer-enhanced-security-configuration-ie-esc-in-windows-server-2012/
Regards.
If you have any feedback on our support, please click
here
Vivian Wang

How to configure terminal services in Windows 2012 server to make multiple connection simulteniously

Hi I am configuring a Windows Server 2012 in a way so that 10 user can access this server through remote desktop connection simultaneously. We have purchased 10 UserCal license for this server.
Please guide me step by step ho to configure this server?

Server comes with 2 concurrent administrative RDP sessions. To enable it in server manager:
Click Yes on the pop-up message to enable the corresponding firewall rule.
To use more than 2 concurrent sessions, you need RDS. See this blog post
for how-to. Note that there's an RDS license required. This
this post for RDS features.
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7

Hi Techys,
Kindly help me to resolve the below issue
"Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
Many Thanks,
Madhu

Hi,
Follow this link for smooth installation for SP 2010 on Win 7.
http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
Murugesa Pandian.,MCTS|App.Development|Configure

Windows 2012 server back up failing with with error in snap-in

Hi folks,
A brand new installation of Windows 2012 Server fails to do a scheduled back up to a NAS drive. The one of back up worked to a shared folder on the network. The error it gives out is "MMC has detected an error in a snap-in and will unload it."
The error occurs just before I finalize the set up of scheduled back up. I am happy to provide more information should there be a need for it. Any help out there?
Thanks in advance,
Chilfa

Hi,
Firstly, re-install the Windows Server Backup feature on the server. Then run chkdsk on the NAS drive to check if there is any error on the drive.
Chkdsk
http://technet.microsoft.com/pl-pl/library/cc730714(v=ws.10).aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Install Remote Desktop Services Failed on Windows 2012 Server

I understand RDS is not recommended on DC due to security consideration. However since I want to play it at home, it is not much a concern. Such scenario works fine on Windows 2008 R2. But on Windows 2012, the RDS (session-based, have not
tried VDI, but expect same result) installation always fails and is incomplete on DC.
In \Administrative Tools\Terminal Services, I only have RD Licensing Diagnoser and RD licensing manager. The remote desktop service management service cannot be started (Error code: 0x88250001). Is there any extra configuration needed for RDS
working on Server 2012 DC or before the installation? Thanks.
Update: this issue has been solved in Windows 2012 R2 Server. According to
http://blogs.msdn.com/b/rds/archive/2013/07/09/what-s-new-in-remote-desktop-services-for-windows-server-2012-r2.aspx
"Single server RDS deployment including Active Directory. We now support running our RD Connection Broker role service on the same physical instance as an Active Directory Domain Controller. In addition, we published
guidelines for how RD Session Host could be used without the RD Connection Broker."
The guidelines (http://support.microsoft.com/kb/2833839/en-us) primarily apply to Windows 2012 Server.

Asinine. Simply Asinine. Microsoft took it out because of $GREED$.
RemoteDesktop has become so popular, they had to break it to make more money. Thats why they discontinued SmallBusinessServer.   If this practice is so tabooo... Why did MS go the opposite direction with SBS 2011 Premium Cal's? SBS2011
had DC, Exchange, RDS and Sharepoint,SQL, RemoteWebWorkplace, OWA all working in perfect harmony. It is an untrue statement then, that it was "allowed but not recommended"
Now you by Server2012 (core + two virtual) and its not enough for all this.
You need at least another $700 for another sever licence to have it all
and who knows if SQL will run on a DC, or Exchange, or R-DERP server. Another reacherous bridge to cross.
By far, the absloute worse release since Millennium. The product is not ready for production, we broke our rule of waiting until the first SP1 upgrade for this and Exchange 2013. Problems with USB drivers and networking running extreamly slow.
Our 2003 SBS server was at least three times as fast, and this server has SAS and SSD drives running. It can't get out of its own way, and IE10 is the most unstable piece of crap to come out of Redmond. Open wide and swallow - Mother Microsoft
knows whats best for you. YOU WILL EAT OUR SLOP AND LEARN TO LIKE IT.   Server2012 AKA "METRO-SERVER"
Now here I sit after 50 Hours back to back setting up a new R-DERP server 2012, AD, Have my RDP licences in my hand at $100 each, and WTH does Microsoft care if I install it on my DC. ITS MY DC. And the cost savings versus the "risk" was
previously MY decision.
Sure, I can install a couple of Virtual HyperV sessions but they are so tempremental to a power-outage in a small business its not worth it. I have to double up my server hard drive resources, buy a $800 battery backup unit and make sure to attach
the cable, and even then, if that Bi**H does not shut down properly, one bit goes awry in a VHD or VHDX file and you are screwed. Restore from lastnights backup and forget about todays work. Not to mention it will probably take a half day to try
to fix it, then recover it then tell the 30 users they lost a days worth of work.
HYPER-V is for test servers and has no place in a small (micro) business environment. 5-30 users.
Microsoft's solution, buy another server. Need Exchange? Buy another server or take the risky cheapskate route and spin up some VHD's. Might as well put a gun to your head and play russian roulette, at least you know you have a one in six
chance of failure. With MS, its a 100% failure for a dirty shutdown power loss, motherboard blows, memory goes corrupt in a few years, your conventional method of recovery is gone, and you have some upchucked VHD file to try to recover some of TODAYS
data from.
Screw server 2012 forever.
I will sell 2008 and SBS2011 Premium unitl it rots in hell like XP (of which there is NOTHING wrong with for the average, WORD, EXCEL, OUTLOOK and QUICKBOOKS that all SMB's use. Its MS $GREED$ Grab the world by the B**ls and squeeze with all
your might to squeeze every dime you can out of *SMB* because big business is going to run thier 2003 Exchange and 2008 servers into ground before they switch to this garbage.
YOU CANNOT INSTALL EXCHANGE 2013 on DC , OR on R-DERP server.
Go buy another server license and server or MOVE TO THE CLOUD and get fleeced every month.
I have 30 DC/R-DERP/Exchange and SBS2011 Premium servers all running for years in perfect harmony, locked down with security so the users can't even WIGGLE with something they are not supposed to work with. They get their apps, cannot install anything
and all these servers are running just fine behind the firewall and perfectly save. The track record of this combination is 100% stable and is up 24/7/365 with no problems. Do yourself a favor and throw this 2012 into the river, you don't need
any weights because it is LEAD and will sink to the bottom by itself.
Why, you ask? Official is "Its for your protection" The real reason? To sell you more $700 server licences.
Maybe for SMB, we start selling Linux NAS Servers, host the Exchange in the cloud and be hearded like cattle to the Microsoft slaughterhouse. One way or another, you are going to bleed.    A little each month to move to the cloud, or
a small fortune if you want to have it in house. Microsoft wants it to be more expensive to have in house. No more buying a server and running it for six years before you upgrade. They can't have in house servers competing with their cloud,
and small businesses are the low hanging fruit ripe for the pickin'.

Synchronization fails on Windows 2012 Server

Hello, Running DPM 2012 R2, Protected computer Windows 2012 Standard
I'm backing up only folders (19 GB) on a Windows 2012 server which also have SCCM 2012 installed on it. The initial replica and recovery point creations are successful. Any
scheduled synchronization job scheduled after will fail. The job display "In progress" but there is 0 MB data transferred and will remain in that stage for days until I cancel the job. A reboot of the protected server
resolves the issue temporarily where I might get a couple days of successful synchronization\recovery points but then the job will freeze again. I have looked in the event logs and the logs in Monitoring on the DPM server and also on the protected computer
but have not found any error that points to the cause. Has anyone seen this issue? Will be grateful if someone can point me in the right direction of troubleshooting this issue. Thank you.

Not seeing any errors that stands out. Here is the log from today's synchronization job that is hung.
2B98 2AC0 06/18 14:50:54.265 31 vsssnapshotrequestor.cpp(2078) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::DoFailureCleanup [00000000028FD320]
2B98 2AC0 06/18 14:50:54.265 31 vsssnapshotrequestor.cpp(1630) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::ReleaseVolumesForSnapshot [00000000028FD320]
2B98 2A40 06/18 15:05:54.409 31 vsssnapshotrequestor.cpp(119) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::~CVssSnapshotRequestor [00000000028FD320]
2B98 2A40 06/18 15:05:54.410 31 vsssnapshotrequestor.cpp(2044) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::CleanUp [00000000028FD320]
2B98 2A40 06/18 15:05:54.410 31 vsssnapshotrequestor.cpp(1630) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::ReleaseVolumesForSnapshot [00000000028FD320]
I ran the VSSADMIN LIST WRITERS command after I cancelled the job and this is the returned message.
"Waiting for response.
These may be delayed if a shadow copy is prepared."

ATL COM server error (0x800706C6 The array bounds are invalid) in Windows 2012 server

Hi,
We have a ATL COM server application which was developed using Visual Studio 6.0. This was ported to Visual Studio 2003 later.
The application was running without any problems on Windows 2008 server. When we installed it on Windows 2012 server the services would not start at all. On contacting MS support we can to know that the code needs to be built using Visual Studio 2013. The
same was done wherein we ported the application to be built using Visual Studio 2013.
The application is still failing. On debugging I could trace it to CoResumeClassObjects() call. This call returns error "0x800706C6 The
array bounds are invalid.". The same works perfectly fine on windows 2008.
Does anyone know what has changed between 2008 server and 2012 R2 server with respect to COM implementation.

Hi Amit,
Please try call CoResumeClassObjects to register classes in ServiceMain function.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Eventlog 1030 group policy update error on Windows 2012 member server

group policy update is failing with event ID 1030
Computer policy is getting applied but User policy Failes. Other windows 2012 servers are successfully updating.
gpupdate /force
Updating policy...
Computer Policy update has completed successfully.
User Policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows attempted to retrieve new Group P
olicy settings for this user or computer. Look in the details tab for error code
and description. Windows will automatically retry this operation at the next re
fresh cycle. Computers joined to the domain must have proper name resolution and
network connectivity to a domain controller for discovery of new Group Policy o
bjects and settings. An event will be logged when Group Policy is successful.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results.

Hi,
Before going further, I assume that the user account we were using is a domain account. As a result, we can use this account to log onto other domain computers to see if its
user policy settings can be updated successfully.
Besides, for troubleshooting this issue, we can try to retrieve Gpsvc.log to check this issue.
Regarding how to enable logging in the Gpsvc.log file, the following blog can be referred to for more information.
How to enable GPO logging on windows 7 /2008 r2 ?
http://blogs.technet.com/b/csstwplatform/archive/2010/11/09/how-to-enable-gpo-logging-on-windows-7-2008-r2.aspx
Best regards,
Frank Shen

Windows 2012 Server Backup Problems - VSS Error

Our company uses Windows Server Backup to back up our Windows 2012 Server. We back up the host component and the two virtual machines on the server. Every time I install windows updates
on our server my backup jobs stop working and I get a VSS error. In order to get backup working again, I have to recreate my backup job. In order to do this I have to attach all the backup drives to the computer at the same time.
This has been an issue all the way back to when the server was first installed. At that time the person who installed Windows Server talked to Microsoft. Microsoft said the problem would be fixed in the first service pack which they ended
up never releasing. I have looked online, but haven’t found any information on these issues. Are there any fixes for these two problems?

Hi,
Sorry for the delay.
Can you first do a backup then install windows updates? Please provide more detailed message about the VSS error.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Assessment and Deployment Kit (ADK) for Windows 2012 Server

Hi
I need to download Windows ADK for Windows 2012 Server. The link mentioned on microsoft website "http://www.microsoft.com/en-in/download/details.aspx?id=30718" is not reachable. Can anyone please tell me, from where I can download Windows ADK for
2012 Server.
Thanks
Manik Bansal

Hi Johan, Hi Manik,
Your reply with the link for the Windows Assessment and Deployment Kit (ADK) for Windows® 8 at http://www.microsoft.com/en-us/download/details.aspx?id=30652 has been very much appreciated.
I have also found a new and updated link to the *NEW* Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 at http://www.microsoft.com/en-us/download/details.aspx?id=39982 that was released and published on 2013-Oct-17.
Please note that this ADK can be used with Windows Server 2012, but there are some important differences between the Windows 8 ADK and the Windows Server 2012 ADK. The TechNet summary of the ADK may be explored at the link http://technet.microsoft.com/en-us/library/jj200116.aspx
The details of the ADK for Windows 8 may be explored at the link http://go.microsoft.com/fwlink/?LinkId=248647
Thank you,
Michael C.

I want to deployment virtual machine by Hyper-V with windows 2012 server

I want to deployment virtual machine by Hyper-V with windows 2012 server. So I need step by step guide line with screenshot and video link.
Thanks,
Qamrul

Hi Qamrul,
Additionally here is the link for hyper-v getting started guide (server2008 ) :
http://technet.microsoft.com/en-us/library/cc732470(v=ws.10).aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 2012 server image creation

Hi
I am posting this here as you have worked on imaging OS.
here is the situation:
I am working on creating windows image file (WIM file) for our company and i have already created images for windows 7 and also 3 different type of windows server 2008 without any issue. everything worked as it is supposed to. now i am trying to create an
image from Windows 2012 server. so all my process is same as i did for server 2008 but i get this error:
[error] c:\recovery\WindowsRE\winre.wim <error = 2>
error imaging drive [c:\]
they system ca not find the file specified.
some point to mention:
1- c:\recovery\windowsRE\winre.wim actually exists
2- as i mentioned i ahve done imaging many many times in the same environment and everything works just i get this error when i want to image my windows 2012
3- I boot in PXE environment and then try to run IMAGEX command and create my WIM file.
4- I have about 80 G free disk space on the partition I want to create my image to.
your help is appreciated.

Thanks for your reply.
as i mentioned before imagex works perfectly for all my images ( win7 and also win 2008) it just fails on win2012
about DISM: I have worked with DISM to inject updates into images offline but i didnt know we can create an image of forexample C drive with DISM. is it possible?
I would actually use a "capture image" from a WDS-server, which is actually the easiest way (in my opinion) to create a Wim-file. What you have to do is set up a WDS server, add the boot.wim from e.g. Windows 2012 DVD into boot images, and then right click
it and "create capture image". Once you boot into that, it will help you create a .Wim-file that can be saved to the same disk, external disk (or even to the WDS if wanted).
I used to use imagex for older OS:es, but it doesn't work with Win8/Server2012 in the same way.

Please help...i have a windows 2012 server and it keeps closing after 30 mins...

hi. i have a windows 2012 server and it keeps closing after 30 mins...i am connected thru RDP and have looked everywhere online for a tutorial to change the setting that keeps closing it but can't find it anywhere! please help!

Hi,
Thank you for posting in Windows Server Forum.
Have you check the timeout and reconnection setting for RDP?
Does disconnection happens on active session or Idle session?
We can configure the setting by collection properties or by GPO setting.
On collection Properties check the Timeout Tab and set the setting according to your requirement. On GPO we can find this setting on below mention path and check according to it.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
You can check Configuration 1 Part from below article.
[Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
http://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Post-deployment configuration failed error in windows 2012 server

Similar Messages

Maybe you are looking for