POST does not show up after the installation of RX2600XT-Diamond

Hi All,
I just purchased my MSI RX2600XT-Diamond 256MB Diamond last week.
It works like a charm; however, an annoying issue surfaced after I installed this video card on my computer.
Ever since I updated the card with Catalyst 7.9, the video card WILL NOT display POST or anything in between the first beep and my desktop.
I use MSI 7300GS/HDMI previously and had uninstalled all the nvidia driver out of my computer to ensure there is no conflict. Nothing. No picture until desktop.
I am using DFI-Infinity RS482M that is fine working on its own DVI output and it will POST etc.
My question is: what went wrong?

Quote from: AaronYuri on 23-September-07, 06:22:38
He wants system, power supply specs and amperages on the +12v rails.
You didn't read it correcty:
First sentence of the Moan Guide...
DFI RS482 Infinity Rev 10. BIOS rev 6.00
Athlon X2 3800+ @2.4ghz
2x1GB PQI 3-4-4-8 @200Mhz
WD 250GB
MSI RX2600XT Diamond DDR4
Catalyst 7.9
Windows XP Media Center 2002 SP2
Sparkle ATX-450PN-B204 450W
+12 min 11.78; max 11.97; current: 11.90
I don't know why this spec has anything to do with my problem.
As I stated before, I have NO PROBLEM with nvidia card installed on my system.
I can hear the computer running through POST but I cannot see anything on my display until the blue Windows Welcome screen and my desktop.

Similar Messages

  • Ibook g3 hard drive does not show up after new installation

    I have an older ibook g3. I purchased a 20gb hard drive to replace the dead 10gb hard drive that came with the computer when I bought it new. The installation was fairly easy. After the hard drive was installed and everything was put back together I turned on the computer and loaded the install disk into the cd tray. The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
    Scott

    Hey Scott,
    The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
    When you're in the installer go up to the top menu bar under utilities? or tools? and start up disk utilities. See if you see the hard drive there. If so it might not be formatted correctly so erase it and format it for your install (usually Mac OS Extended (Journaled). That should make it show up.
    Richard

  • After downloading album covers (some not found) itunes does not show most of the covers.

    After downloading album covers into iTunes iTunes does not show most of the covers. It showas blank white boxes except for those where "cover not found" (music notes).
    You have any idea how this happens, perhaps with location of the files.

    iTunes refuses to play/read file, it cannot recognizes headers, or recognizes those as corrupt, but giving no error messages. The problem is the stored artwork(s) on your music files. To correct this, select the files that are corrupted/cannot be played on iTunes&iPod, click "Convert ID3 Tags...", then select v1.1 from the dropdown box (first, try this on a few to see that my solution is working).
    By doing so, iTunes replaces headers, but your ID3 tags will not be changed (I assume you are using ID3 v2.4), nor you'll lose any info or anything else. This works as a hotfix for those files. If you try to replace headers via another program, your information will be truncated, and any artwork stored will be deleted. So I recommend this one.
    You'll see that iTunes cannot play most of the files that has artwork(s) stored in them. New version hasn't fixed this problem, and it has risen with iTunes 8.2.x. If it's going to take long, I suggest you should go back to 8.1.x.
    With best regards,
    lyravega, goekhan.

  • I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    It is hard to exactly understand what you have  done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
    Updating a Chart Copied from a Numbers Document
    If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
       Select the chart on the page and click the Refresh button that appears.
    Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
    I hope it has helped you.

  • A movie i purchased does not show up in  the download after it suddenly stopped while downloading over half way through

    a movie i purchased does not show up in  the download after it suddenly stopped while downloading over half way through.. help!

    I totally agree, I am not going to discredit your comment as everyone is entitled to their opinion as I am BUT, I will not bad mouth other members, especially since  may have not have written my initial statement in a logical manner so Ill try and answer them in order to your response.
    1. I DO LIKE iTunes in general and on the whole  BUT I dislike the new update, iTunes 11, it has completely buggered everything up.
    2. Prior to the update, everything worked brilliantly, including Apple TV. It was user friendly and was easy to use. The new update is counter-intuative and is hard to find, fix anything and as I have had to find out at my cost, reset my Apple TV and start downloading all over again. So let me reaffirm, it is iTunes11 I find hard to fathom, not the old iTunes.
    3. No I am not a developer but I have been using PC's for over 20 years so I do know how one works.
    4. Good Question about who would help me, again, it is someones opinion against someone elses. One day, I may write something that generally people agree with, another they may not, depends on the subject.
    5. " I do not love Apple" ?yet I have an iPhone 4s, iPad and Apple TV, find that an illogical comment!
    6. I have made a General Search on the forums on the subject and the general consensus is that the new update is one update to far.
    7. Oh, I am not a genius otherwise I would have solved the issue in the first place!
    Just to re-iterate, I am not bad mouthing Apple in general, all I am saying is that iTunes 11 is one update to far and I am not the only one saying it.... some have gone a lot further than I have, again, their opinion and who am I to argue with them as I have an opnion as you do and I will most deffinatly not bad mouth a member because I disagree with them for the above reason, debate it, yes, not belittle them.
    Hope these have cleared up my initial statement?

  • The new value of bind variable does not show up after changed by PL/SQL

    Hi,
    I am running APEX 3.2. I use PL/SQL process to assign a new value to a bind variable, say, :P2_TEST := 123. The new value does not show up on the page although I can see it in the Session status.
    How can I make the new value to be displayed on the page immediately after the process is run?
    Kind regards,
    Tee

    Maybe you could use an ajax routine to refresh the item in your pl/sql routine?
    Thank you,
    Tony Miller
    Webster, TX

  • On windows 8.1 charms bar does not show up and the touch functionality is also degraded

    upgraded my elitepad 900 to windows 8.1 . after this the charms bar does not show up and the touch functionality is also degraded while playing games. i believe i need the latest synaptics gesture suite.  Cannot find it. Please help.

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this HERE.
    HP ElitePad 900 G1 Tablet Support
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Yesterday I  reset my settings on my  iphone 4 to correct another problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

    Yesterday I reset my settings on my iphone 4 to correct a problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

    Best practices says plug the USB cable into the computer, then plug the 30 pin connector into the iPhone.
    If everything is working correctly, you should be able to plug the iPhone in at any time. Before or after opening iTunes.
    Depending on what settings are selected in iTunes, the program may or may not automatically open when you connect the device.

  • My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

    my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
    Diagnostics test
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    ECS G31T-M7
    iTunes 10.5.2.11
    QuickTime 7.6.9
    FairPlay 1.13.37
    Apple Application Support 2.1.6
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0012ABAC07F3CCB0
    Current user is an administrator.
    The current local date and time is 2011-12-31 14:06:21.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is not supported. (16005)
    Video Display Information
    Intel(R) G33/G31 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
    Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
    IP Address:             192.168.1.5
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Sat Dec 31 13:46:09 2011
    Lease Expires:       Tue Jan 03 13:46:09 2012
    DNS Servers:         192.168.1.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    SSL 3.0 Support:     Enabled
    TLS 1.0 Support:     Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was unsuccessful.
    The network connection timed out.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-12-31 14:00:02.
    **** Device Connectivity Tests ****
    iPodService 10.5.2.11 is currently running.
    iTunesHelper 10.5.2.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    rawkiss’s iPhone, iPhone 3G running firmware version 4.0
    Serial Number:       86931UEAY7H
    **** Device Sync Tests ****
    Sync tests completed successfully.

    I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
    Here is a link that will take you directly to the Tech Note:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
    When using this fix the Tech Note indicates:
    "Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
    however it did retain the captions (at least it did for me).

  • I updated my macbook with lion and airdrop does not show up in the finder, how could this be?

    I updated my macbook with lion and airdrop does not show up in the finder, how could this be?

    shldr2thewheel wrote:
    If this is the case: How to enable AirDrop over ethernet and AirDrop on unsupported macs running Lion  .
    http://osxdaily.com/2011/09/16/enable-airdrop-ethernet-and-unsupported-macs/
    Interesting.  Googling, I see that someone posted that on these discussions as well:
    https://discussions.apple.com/thread/3331216?start=0&tstart=0
    which mentions what I recall: that Airdrop (as implemented by Apple) would create an on-demand ad-hoc Wi-Fi connection, even if you were already connected to an access point.  Normally, you can't connect to multiple Wi-Fi networks, thus the reason for Airdrop only supported on newer Wi-Fi chips.
    And Apple's KB:
    http://support.apple.com/kb/HT4783

  • Form does not show up after been put in portal page

    I have created form application and tested it in 9iAS but when I put it in Portal page, It does not show up in the Portal page. The report that I created under the same Application does show up. However, it does not show the form. I have check the Access and everything looks right. (I even grant it to the public and still does not work).
    Any help would be appreciated.

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by chetan.kashyap ([email protected]):
    Johnny,
    This looks strange. We haven't encountered such problem. Could you pls give us more details. Like:
    Are you using "Inherit Privilege from Application" ?
    Are you using Tab page/ Normal Page.
    If tab pages, have you set tab level security?
    Are you able to run that particular form from application? (Pls check it has a Valid production version).
    Are both forms & reports in the same application?
    Is this problem occuring for only a particular form or for all the forms?
    If you could provide the STEPS that you did..
    Thanx,
    Chetan.<HR></BLOCKQUOTE>
    Chetan and Johnny,
    I have the same problem as Johnny. Chetan, in answer to your questions:
    1. Yes, I am using "Inherit Privilege from Application"
    2. I tried it both on a page and on a tab and checked security, following the directions in "Building Portals, Release 3.0.8" Using "Portal30" login, access "Manage" etc.
    3. Yes, the form runs in Application, but not as a portlet on a portal page. We are using the standard demo configuration, Oracle 8i (enterprise ed.) and Oracle9i Application Server (minimal ed.).
    4. Yes, valid production version.
    5. I tried running reports and forms from same application and from different applications. Still does not show up on portal page.
    6. It occurs for all forms.
    7. Steps: As I indicated, I followed the directions closely in "Building Portals" which builds "Form based on table or view", "Publish to Portal" I even tried the database sequence (see page 4-27) and added that to the form configuration. I'm running it on NT 4.0 (service pack 5). The software was downloaded from the Oracle site.
    null

  • Viewer does not show all of the clip

    Import routine:
    MTS format from Canon > Converting to Quicktime with Voltiac software. Resolution 1920x1080.
    Impossible to set correct In and Out points in the Viewer as the whole clip is not shown. Can change the duration of the clip in the Timeline as the whole clip is shown there. After rendering there are no problems in the Canvas.
    Anybody got a solution? Would be much appreciated!
    Regards,
    Tryg

    I'd be converting to 1440x1080 because FCE does not support 1920 without rendering.
    At any rate, why the whole clip does not show up in the Viewer and does in the Canvas eludes me.
    Al

  • I've a new account on iMac.  When composing an email the contact list does not show up on the bar.  WWhen I start keying in a name, it comes up with the address.  How do I engage the  contact list from the email?

    I've a new account on iMac.  When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email.  When I start keying in a name in the email, it comes up with the person's address, which shows it is synced.  How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?

    With the New Message window open, go to the View menu and select "Customize Toolbar...".
    In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
    That item should be then added to the Toolbar for the New Message window.
    Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another.

  • I have an app that does not show up on the left under iTunes.  How do I delete it?

    I have an app that does not show up on the left under iTunes.  How do I delete it from my Iphone 5?

    If the icon exists on your screen, just do a long press on that icon and when the small X appears on top of the app, press it and it will delete it.  As long as this is not an Apple app, since those cannot be deleted.

  • HT1386 I am trying to sync my ipad3 to my itunes on a pc laptop, the ipad does not show up in the itunes left hand column. an ipod is already synced to the itunes. any suggestions welcome

    I am trying to sync my ipad3 to my itunes on a pc laptop, the ipad does not show up in the itunes left hand column. an ipod is already synced to the itunes. any suggestions welcome

    Hi lindaasw,
    Welcome to the Support Communities!
    Do you have the latest version of iTunes for Windows installed?  I would turn on the sidebar and the menu bar just to make sure you are seeing everything.  If the iPhone is still not recognized in iTunes, follow these troubleshooting steps:
    iTunes: Turning on iTunes menus in Windows 8 and 7
    http://support.apple.com/kb/HT5610
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
      - Judy

Maybe you are looking for