Post GI from IW41 consigment stock and batch determination

Hello gurus
Have looked around for a solution here, and have not found anything.
Our problem is that when we do GI from consignment stock in IW41 (mvt 261 W) we have to assign the batch. When doing standard GI it suggest the oldest batch. The process is first a serviceorder( IW31) and then an advance shipment notication, then a delivery which is done GI. When we then do confirmation of the order in IW41 and wants to do GI for the consignment stock no batch is suggested.
Is there any customizing I have missed? Or is this standard?
Regards
Ivar

Thanks, but this is not the solution. The problem is in the service order and the confirmation on this. If we have regular stock that we do GI for, it uses FIFO and suggest the oldest batch. But if we have an item with consignmentstock then it does not suggest anything, even if the only exist one item in consignment stock.
Any other suggestions?
Regards
Ivar

Similar Messages

  • SAP tables for stock and batch

    hi MM guys
    I have a requirement to check stock of the material before issuing to Process order. Can anybody pl.tell me the exact table for the stock and batch for that material.
    Regards
    Laxmikanth

    Hi,
    Thanks to all.I am getting the stock and batch but my requirement is to check total stock which is available on the day of posting.
    Actually in COR6N in PP when they do goods movement even stock is not avilable still system is allowing to post the materials .And in MMBE it is showing negative stocks.
    So pl.send the table which can give me total stock on a given date.
    Regards
    Laxmikanth

  • Problem about sales order stock stock transfer and batch determination

    Hi, experts, I get a problem about sales order stock stock transfer and batch determination.The following is the current situation of my system:
      In OMCG I assigned search procedure ME0001 to both 311 and 311 E and ticked check batch. After that, I found  that if iI need to tranfer unrestricted-use material from storage location 1000 to 2000 with movement type 311, I just need to input * at the field batch, then the system will display all of the available batches. But for the transferring of sales order stock with movement type 311 E, after I input * at the batch field, no batch is displayed and there is also no message from the system.
      Can anybody help me? Is there anything else I need to do? Thanks very much.

    I think my question is not clear, actually I tried 562 E , 411 E and 413 already. all the transaction looking for the sales order but unfortunatly the sales order is deleted  from SAP.

  • Availability check and Batch Determination

    Dear Experts
    Would you provide me help documents with screen shots on Availability check and Batch Determination to customize one of our projects
    Thanks in Advance
    Regards
    Ravi

    Hi ravi
    Check the Availability check and batch configurations .
    Availability check and TOR
    [https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=29323]
    Batch configuration
    [https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination]
    [https://wiki.sdn.sap.com/wiki/display/ERPLO/batchdeterminationin+sd]
    NOTE : Kindly search the configuration part before posting
    Regards
    Srinath

  • Problems with existing stock and batch management indicator

    Hi,
    We would like to set the batch management indicator for a material.
    However, there is stock on the material for the given plant.
    The different stock categories for the plant/material combination are as follows (according to transaction MMBE):
    Unrestricted use 150
    Reserved (for production ordeers) 42
    Open order qty (incoming PO) 100
    "When I try to set the batch management indicator in MM02 I receive the following error message:
    Material Master Maintenance
    The batch management requirement cannot
    be changed for the following reasons:
    Stocks already exist at plant level.
      Plant SLoc
       PL01 SL01
       PL01 SL02"
    Can someone please guide me in how to remove the stock and the reservations, so that we can set the batch management indicator? Does the reservations of stock have any impact (there are reservations for 5 different production orders for this material)?
    Thanks in advance,
    Lars

    in plant A, you have to add 21 in current period (e.g. with 202 movement), then you issue 171 in previous period. with 201. Result: both periods are zero.
    plant B, just issue 17 in previous period with 201.
    for Plant A   171 with movement 202 back into stock with previous period date, and subsequently 21 goods issue using 201 in current period.
    for plant B: 17 with movement 202 and previous period date.

  • BAPI_GOODSMVT_CREATE and Batch Determination

    Hi experts!
    I'm new to batch determination and I'm facing an issue. I've set up a batch determination configuration and it works fine when I post a goods issue in dialog process (MB1A) entering * in the batch field.
    Now I'm trying to do the same with BAPI_GOODSMVT_CREATE, but if I enter * in the batch parameter I get an error message M7116: "The storage location/batch function * is not defined here". If I leave it blank i get the error message "Enter batch".
    Hope somebody has any clue.
    Thanks

    Hi,
    If your material is "batch managed" you have to supply the bacth number in BAPI.
    The BAPI does not search automatically for a batch number like MB1A.
    Best regards,
    Leandro Mengue

  • Backorder and batch determination

    Dear all,
    The batch determination is automatic at the sales order level.
    If a sales order is not confirmed, is it possible to run the backorder program to check the availbalitiy, confirm the quantity, and determine the batch number ?
    I tried to do it but only the ATP is done and the quantity is confirmed. The batch is not determined.
    Thanks
    Kind regards
    Véronique
    Edited by: véronique pinelli on Feb 14, 2011 10:59 AM

    Dear all,
    The batch determination is automatic at the sales order level.
    If a sales order is not confirmed, is it possible to run the backorder program to check the availbalitiy, confirm the quantity, and determine the batch number ?
    I tried to do it but only the ATP is done and the quantity is confirmed. The batch is not determined.
    Thanks
    Kind regards
    Véronique
    Edited by: véronique pinelli on Feb 14, 2011 10:59 AM

  • VPRS with Free Goods and Batch Determination

    Dear Experts,
    I have a problem on the products billing with Free Goods.
    I will explain this, before the implementation of Batch Management (with batch split) the billing document show the condition VPRS on the main item (TAN) and the free goods item (TANN).
    Now, when the Batch Management was up, the condition VPRS disappeared on the TANN item, I checked the order and it does shows the VPRS conditions. When i check the conditions on the billing document it shows me the following message when i check the VPRS condition
    Condition ignored (requirement 004 not fulfilled)
    Then I tried to debug the price determination and i realized that only on the TANN position the field komp-evrwr (price determination on the item category) is not 'X'.
    Aditionally i can mention thar the batch split item category is defined as YG05.
    Actually i only managed to show the cumulated VPRS cost on the main item.
    Please someone say to me if this correct or there is a way to put the VPRS on the free goods item.
    Javier Sandoval Vera
    Ecuador

    Dear Javier Sandoval Vera,
    As per the standard pricing Routine 4-Cost system may calculate the cost only for the pricing related materials,here TANN item is not relavent for pricing so system is giving that message.
    If you want consider non priced item also in the cost calculation then you can develop new routine as per your requirement with the help of ABAPer. (by copyingh the existing routine 4 then do the changes accordingly).
    Or
    You can maintain R100 -100% discount condition type in your pricing procedure,maintain settings as manual condition.
    Now maintained the price relevant check for free item also then give the 100% -discount by entering R100 condition type manually with 100% discount for that specific item to make the item price as zero.
    Now sytem will calculate the VPRS value without fail.
    I hope this will help you,
    Regards,
    Murali.

  • Serial number and batch determination in sales order

    Good afternoon,
    When I try to assign any serial numbers to a given material in sales order, the system returns the message "Maintaining serial numbers only possible, if valuation type is specified". I can workaround this by assigning a batch number to the item, then I can input my serial numbers normally.
    Well, that leads me two questions:
    1) Can we assingn serial numbers WITHOUT having to input batch numbers first?
    2) If not, is it possible to determine batches in sales order items without having them created previously in tcode MSC1N?
    Thanks in advance and best regards.
    Adriano Cardoso

    Dear Kris,
    Yes, I know this is an unusual scenario, but our customers require us to send the serial numbers of the products in advance for documentation purposes.
    Regards,
    Adriano Cardoso

  • About goods issue from vendor consignment stock

    Hi, I meet some issue needs your help!
    The outbound delivery needs to post goods issue from vendor consigment stock directly. then how to choose which vendor's
    stock for this delivery base on the actual process?
    thanks
    Best Regards,
    Rory

    Hi
    In R3 it is not possible
    If say material X is 100 units lies in your premises the vendor  consignment stocks (the vendor property lying in your premises ) and out of that 100 units if you are making a sales order and then a goods issue means it is not possible
    To sell that material you need to make it your own stock ( that is transfer from vendor consignment to your own ) as good as buying that stocks and then sell it
    But the same scenario is possible in IS retail
    For this iS retail server is reqd
    In Retail you can play with vendor consignment stocks as much as possible without making our own stocks
    You can search SAP library regarding the settings of the same
    http://help.sap.com/erp2005_ehp_04/helpdata/en/c6/af3c415e5dde2be10000000a1550b0/frameset.htm
    Regards
    Raja

  • Automatic batch determination (Fifo) in VL02n and WM/foreground

    Dear all,
    I am trying to set up an automatic batch determination /stock determination strategy on outbound deliveries (FiFo) in a WM managed warehouse.
    I have not yet  decided whether to go for the batch determination or the stock determination. As all my FERT are batch managed, both should be possible.
    I want the determination to happen in foreground in delivery. So everytime I want to pick for a delivery I want to have a list of available storage units/ available stock and to be able to select them manually.
    When I read through SAP documentation on stock determination (SPRO activity OSPX/define strategy) it says once WM is involved only background handling is possible.
    Does the same restriction also hold for batch determination ? Can I force a selection screen to appear?
    If this is not possible: is there a user-exit or Badi (or something similar) which can be used to make the screen appear?
    If this is also not possible, how could we make sure that certain customers only receive goods of a certain quality (contained in a batch characteristic)?
    Thanks all for your valuable time

    you have to decide whether you want do the batch determination in the delivery or in WM transport order.
    The batch determination in the delivery is much more powerful. Once you have determined the batches in the delivery, then WM has to pick exact those batches.
    if you leave batch determination to WM, then the batch from the TO is written to the delivery when confirming the TO.
    if you want do it in foreground in the delivery, then you should not switch on the automatic batch determination, because then the  batch determination would be executed twice (first automatic when creating the delivery and again manual when the user wants to do it foreground) and  batch determination has certainly impact on the performance.
    However, with right values in classification then I do not see any need to do it foreground.

  • GATP check for Batch and Batch characteristics

    Dear Experts ,
    I have a question regarding GATP check
    scenario is like this
    1) Create a Sales order in a plant
    and there are 10 supply DC
    consider we are into batch management and the stocks are in Batches with production date and Expiry date
    when i create a sales order for qty  1000 , system must do ATP check in all the plants and pick the right batch according to the expiry date
    how to handle in GATP
    what are the basic steps for configuration and master setup
    Thanks  & Regards
    Raj

    *system must do ATP check in all the plants and pick the right batch according to the expiry date*
    ATP check and batch determination are unrelated things. Batch determination follows ATP check. but the SLED parameter may not be able to determine batches for the entire confirmed qty as there may be some bacthes that do not qualify the SLED parameter (assume only warehouse stocks being in scope of check) and this may not have been blocked before hand in say a separate stor loc that is excluded from ATP qty
    If you want to do ATP check at all locations..then remember that the check is happening at potentailly different material availability dates. It might be prudent to sort all the batches by remaining shelf life..and that might mean if the order qty is 1000.. then you might have 5 plants and 9 batches meeting the criteria based on oldest stocks first.(assuming this is what you would like to do). You then need to create five different line items in the sales order with different delivery plants and then immediately create delivery and do the picking,.
    Let me know if you discover a neater solution around this. You can also try global location determination (and a rule control strategy appropriate) in RBA and see if the proposal is as per the expected result. I have my doubts on this. Also to be considered are delivery group correlation to ship the entire qty at one. So you might have to pack 5 deliveries in one shipment..and probably one invoice?
    Regards,
    Loknath

  • Exclude Quality Inspection from Batch Determination

    Hi Guys
    I have am stuck with  a very strange scenario and need your help to sort this out please
    In the process orders I have set auto-batch determination on release and in the checking rule I have excluded the quality inspection lot.
    Now when I am release the process order on batch determination it picks up the quality inspection batch!
    Can you please let me know where and how this can be resolved
    Thanks in advance
    Rahul

    "Also when I do the material availability check the QI stock is not considered."
    Presumably, this availability check is run when order is status CRTD. Please check if the same checking rule has been applied to "Creation" & "Release" in OPJK. If not, check the differences between these checking rules in OVZ9.
    "However I am not sure if the checking rule decides the batch determination, please correct me if I am wrong. And let me know where do we maintain the relationship between the cheking rule and batch determination procedure!"
    Yes, they are related. Batches go through 3 stages to be determined.
    Stage 1: Check against Stock
    Stage 2: Check against Classification
    Stage 3: Availability Check.
    It may be possible that stage 3 is not a dynamic availability check, in which case the checking rule is irrelevant. However, if it is a dynamic availability check, the checking rule is relevant.
    The quickest way to determine if a dynamic ATP check is executed is to set a breakpoint at Function Module AVAILABILITY_CHECK_CONTROLLER in se37. This breakpoint should be reached when you release the order. The first line of code in the function module is:
    CHECK NOT P_ATPCSX[] IS INITIAL.
    Double click on P_ATPCSX[] to see if it contains entries. If this table contains entries, a dynamic ATP check is executed.
    Also, When you enter CO09 for the material, plant and checking rule, is the QI stock displayed?

  • Automatic Batch Determination while doing MFBF

    Hello PP Gurus,
    I have a scenario related to Repetitive Manufacturing.
    I am doing MFBF transaction and doing Assembly backflush by clicking Post with correction. One of the components is batch managed.
    My requirement is : On selection screen of MFBF I enter MAterial,PLant BAckflush Quantity , REM Production Version and Storage Location.
    What I want is that for the component that is batch managed there should be automatic batcah determination based on shelf life and also it should pick up stock from a particular storage location only.
    Also when I click POst with correction button and go to components screen the Batch Determination button comes greyed out.
    For header material have maintained REM Profile.
    PLease let me know what all I need to do for meeting above requirement.

    Hi Anupam,
    I need to know 2 things more from your side.. As you told I need to assign Stock Detrmination Rule and Batch Determination strategy in Control Data 2 of REM profile.
    I have doubt on Batch determination strategy :
    1) Which Batch determination strategy should I assign here. Second what all else I need to do from my side so that a batch is automatically picked and assigned to the componenet material.
    The things what I have done is : I have a made a Batch Class, Assigned shelf life as a charcterstic to it. I have defined a sort rule with this characterstic.
    What else I need to do.
    Also FYI : We are not putting a planned order in MFBF. We are  inpiutting the material to be backflushed...
    Thanks

  • Quantity available in Batch determination

    Dear Experts,
    I have an issue in batch determination in process order. I do batch determination for the component in process order. The same batch can be assigned to two process orders in split quantity. Since the component is allowed with negative stock posting, sometimes the reservation will remain uncleared if the goods issue posted is greater than the allocated batch quantity.
    Since there is an uncleared reservation, the deficit quantity is reduced from next batch. So the quantity shown in the next batch during batch determination is less than what is actually available in stock.
    Is  these any possible way to fix this and ignore the negative stock during batch determination
    Thanks in advance
    Prathib

    Dear,
    Go to T.code OPJJ.Select your Checking rule (which you have assign in your Checking Control for your Order Type in T.code OPJK) and activate Check for Include Reservation and dependent reservation as X.
    [Thread|in opjj ( Availability check) - diference b/n  X and A in inclued dependent]
    Regards,
    R.Brahmankar

Maybe you are looking for