Post goods issue at item level
Hi All ,
is it possible to do the PGI at Item level ? as far as i can think PGI is only possible for whole delivery ...
We create the HU at the time of Delivery packing ( once all the TO are confirmed for 916) ... Now the requirement ispick the pallet and scanned it and load to truck and DO the partial PGI of the ( i mean the HU which were created as result of Packing ) pallet and then continue with the other pallets of the delivery .. We use HU functionality only for packing ..
Any help on this is greatly appreciated ..
Thanks
Rahul..
Edited by: rahul jain on Aug 30, 2010 8:46 PM
Why do not you create deliveries which correspond to the load for one truck - in this case there's no partial delivery (if necessary, you can split your deliveries using transaction VLSP).
Similar Messages
-
Post Goods Issue Accounting Entry & Profit Center Updation???
Dear All,
At the time of Post Goods issue it generates an accountng entry.
we are getting an error related to Profit center.
we maintained profit center in the sales order. and please clarify me can we create cost element for COGS account which hits at this level.
I am getting the following errror.
Balancing field "Profit Center" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose.
Procedure for System Administration
Customizing
But we need profit cener wise balance sheet.
so please guide me.
regards,
shashi kanth.If you define document splitting criteria based on Profit Center and if your document contains multiple line items with different profit center, this type of error will come.
To check this, Go to IMG Path -- Financial Accounting (New) --> General Ledger Accounting (New) --> Document Splitting --> Define Document Splitting Characteristics for General Ledger
There check whether the mandatory check box is selected for profit Center. So check in your delivery document, whether any line item does not have profit center.
You can also have a look at any of the following notes
a) 995055
b) 1074689
c) 1079819
thanks
G. Lakshmipathi -
No Acc. Doc generated after Post Good Issue - please help!
Hi All,
I have problem when I try to post good issue, the accounting doc doesn't generated.
I have created SO, (Order type - OR, item category - TAB, Schedule Line cat - CB), created PO after the purchase requisition was generated in the SO. processed good receipt and created outbound delivery, everything is fine until post good issue, there is no Acc. Doc created automatically after PGI.
I have check the following setting
material type attribute setting - ok (standard price control, val.update, qty update)
valuation level - ok (valuation area is plant)
valuation grouping code - ok (activated)
valuation areas assigned to the valuation grouping code - ok
valuation class(s) is linked to material type(s) vis acc. cat. ref. - ok
accout grouping for movement type - ok (leave it as default)
configure auto posting - ok (I have run the simulation test, and created the missing G/L acc in the company code which under testing)
The WL Acc Doc type is defined and assigned with number range.
material and accounting period are open
In Purchase order, the purchase item assigned with Acc Assignment Category E, Special Stock is E, Consumption Posting set in Acc Assignment Category is E, Acc Modification is VAY, GR non-valuated and GR non-val. binding checkboxes are deselected.
I know the Acc Assignment Cate will affect the auto acc posting in GR, but I am not sure it will affect PGI in the same way.
Could anyone tell me which value string will be using for this auto acc posting for PGI? My best guess is
MvT S val. update, qty update Mvt Cns
601 E YES YES L ?
Could anyone tell me what cause the Acc Doc not be generated after PGI?
Thanks for your time
Alvinthanks for reply.
Regard to the point 2 suggested by Cathy, the account determination for billing is set, the accouting doc is created after billing.
my problem is no acc. doc generated after PGI.
meanwhile I have searched a similar problem in other forums, I found some similar reply as Prasanth did, so I think I may try to run VA88 to see the result.
Prasanth, could you please explain the pinciple behind of why this happen if what you say is correct.
Thanks for your time!!!
Alvin -
How to understand post goods issue has been done?
how to understand post goods issue has been done?
thanks
Moderator message: please search for information and try finding out yourself before asking.
locked by: Thomas Zloch on Aug 18, 2010 5:21 PMCheck for the status in the table. VBUP ( Item level status ) - WBSTA - 'C' , goods movement completed
VBUK ( At header level ) - WBSTK If 'C', goods movement completed
Sujay -
Changing the field content of 'wrbtr' in accounting document during Post Goods Issue in VL02N
Hi Experts,
I have requirement ,where I need to change the 'amount in document currency value (wrbtr)' in line item of a accounting document, which is created as part Post Goods issue through VL02N.
I have already check BADI's below as follows:-.
1) LE_SHP_GOODSMOVEMENT- No accounting document information flows in this BADI.
2) AC_DOCUMENT - Field 'WRBTR' is not available in substitutable fields list.
3) BTE-1050 - This BTE is not getting triggered while doing PGI.
Please suggest any other possibilities to make the change.
Thanks & Regards,
Suganth.Hi Kartik,
I have checked the enhancement you specified, but it didn't trigger during PGI. Can u please let me know is there any other possibilities to make the change.
Thanks
Suganth. -
Profit Centre Document issue at the time of Post Goods Issue on SD.
Dear Experts,
While SD person is posting Post Goods Issue, System is generating Profit Centre Document along with other documents. We are facing an issue with Profit Centre document here and the issue is:
Some Profit Centre Documents are populating Delivery Order Number on respective field while some are not. Ideally all profit centre line items should show Delivery Order Numbers.
Please guide any solution to resolve this issue, its urgent.
Thanks in Advance.
Regards,
Zain BashirHi Zain
This is a tricky issue
Are you saying that the PCA document has the Delivery Number (VL01N) updated in some cases and not updated in some cases?
The Delivery Number is updated in PCA document when you create Delivery from VL01N and do PGI from VL02N
But, if you do PGI from VL01N itself, then the delivery number is not updated in the PCA document
SAP recommends to post PGI from VL02N
Br. Ajay M -
When I Press the Post Goods Issue Button for a delivery in SD the error dump appears.
Runtime Errors MESSAGE_TYPE_X
Date and Time 10/15/2008 06:38:52
Short dump has not been completely stored (too big)
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
No RFC destination is defined for SAP Global Trade Services
Long text of error message:
Technical information about the message:
Message class....... "/SAPSLL/PLUGINR3"
Number.............. 002
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLMBWL" or "LMBWLU21"
"MB_POST_GOODS_MOVEMENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "biw7sap"
Network address...... "68.88.249.38"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "BIW7SAP"
Database type..... "ORACLE"
Database name..... "ECS"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Mar 20 2007 00:45:21"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 102
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 26130600
Heap.... 0
Page.... 57344
MM Used. 19070624
MM Free. 785208
User and Transaction
Client.............. 800
User................ "CUSER14"
Language key........ "E"
Transaction......... "VL02N "
Program............. "SAPLMBWL"
Screen.............. "SAPMV50A 1000"
Screen line......... 39
Information on where terminated
Termination occurred in the ABAP program "SAPLMBWL" - in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPMV50A ".
In the source code you have the termination point in line 59
of the (Include) program "LMBWLU21".
Source Code Extract
Line
SourceCde
29
when a goods movement for an inbound or outbound delivery is posted
30
directly from VL31N/ VL01N, XBLNR is not yet known when we call
31
CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32
BKPF as well. There is no other way to forward XBLNR to FI as not
33
every document is posted by MB_CREATE -> a new function module in
34
MBWL for transferring the information, called by FI, meant to load
35
the complete function group for all MBxx postings when this isn't
36
required (Performance). Would be the better way to transport the
37
information after switching off MBxx in later release.
38
corresponding IMPORT ... FROM MEMORY ... can be found in
39
AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40
l_mem_id = 'MKPF-XBLNR'. " 641365
41
EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42
ENDIF.
43
IF xmkpf-xabln IS INITIAL. "note 434093
44
CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
45
ENDIF. "note 434093
46
47
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50
CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51
EXCEPTIONS
52
error_message = 4.
53
As soon as we have started to put things into UPDATE TASK, we must
54
ensure that errors definitely terminate the transaction.
55
MESSAGE A is not sufficient because it can be catched from
56
external callers which COMMIT WORK afterwards, resulting in
57
incomplete updates. Read note 385830 for the full story.
58
IF NOT sy-subrc IS INITIAL.
>>>>>
MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60
sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61
MESSAGE A263.
62
ENDIF.
63
Optische Archivierung
64
Spaete Erfassung mit Barcode
65
Redesign of barcode handling -> note 780365
66
PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
67
xmkpf-mjahr
68
barcode.
69
70
MOVE-CORRESPONDING xmkpf TO emkpf.
71
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
72
EXCEPTIONS
73
error_message = 4.
74
MOVE-CORRESPONDING xmkpf TO emkpf.
75
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
76
EXCEPTIONS
77
error_message = 4.
78
IF NOT sy-subrc IS INITIAL.
Contents of system fields
Name
Val.
SY-SUBRC
4
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
6
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
W0
SY-UCOMM
WABU_T
SY-TITLE
Delivery 80015203 Change: Overview
SY-MSGTY
X
SY-MSGID
/SAPSLL/PLUGINR3
SY-MSGNO
002
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20081015
SY-UZEIT
063852
SY-XPROG
SAPLBPFC
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
10 FUNCTION SAPLMBWL LMBWLU21 59
MB_POST_GOODS_MOVEMENT
9 FORM SAPMV50A FV50XF0B_BELEG_SICHERN 769
BELEG_SICHERN_POST
8 FORM SAPMV50A FV50XF0B_BELEG_SICHERN 86
BELEG_SICHERN_01
7 FORM SAPMV50A FV50XF0B_BELEG_SICHERN 16
BELEG_SICHERN
6 FORM SAPMV50A MV50AF0F_FCODE_SICH_OHNE_CHECK 10
FCODE_SICH_OHNE_CHECK
5 FORM SAPMV50A MV50AF0F_FCODE_WABU 11
FCODE_WABU
4 FORM SAPLV00F LV00FF0F 92
FCODE_BEARBEITEN
3 FUNCTION SAPLV00F LV00FU02 44
SCREEN_SEQUENCE_CONTROL
2 FORM SAPMV50A MV50AF0F_FCODE_BEARBEITEN 62
FCODE_BEARBEITEN
1 MODULE (PAI) SAPMV50A MV50AI0F 52
FCODE_BEARBEITEN
Chosen variables
Name
Val.
No. 10 Ty. FUNCTION
Name MB_POST_GOODS_MOVEMENT
XBLNR_SD
0080015203
3333333333
0080015203
0000000000
0000000000
EMKPF
000000000000000000 ##
2222222222333333333333333333222222222200222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
XMSSA[]
Table IT_589[0x196]
FUNCTION-POOL=MBWLDATA=XMSSA[]
Table reference: 307
TABH+ 0(20) = 00000000200D869300000000330100004D020000
TABH+ 20(20) = 00000000C4000000FFFFFFFF04090300E01B0000
TABH+ 40( 8) = 08000000C1108001
store = 0x00000000
ext1 = 0x200D8693
shmId = 0 (0x00000000)
id = 307 (0x33010000)
label = 589 (0x4D020000)
fill = 0 (0x00000000)
leng = 196 (0xC4000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000134
occu = 8 (0x08000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0xD80C8693
>>>>> 2nd level extension part <<<<<
tabhBack = 0x980C8693
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
RRESWK
22222222222
00000000000
00000000000
00000000000
%_SPACE
2
0
0
0
L_MEM_ID
MKPF-XBLNR
4454254445
DB06D82CE2
0000000000
0000000000
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
RNAME
R
52222
20000
00000
00000
SCREEN
BT_UALL
4555444222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
24F51CC000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IT_RSTRUCT
Table[initial]
XMKPF-XABLN
2222222222
0000000000
0000000000
0000000000
%_DUMMY$$
2222
0000
0000
0000
SYST-REPID
SAPLMBWL
5454445422222222222222222222222222222222
310CD27C00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ODM07M[]
Table[initial]
GT_GOCOMP
000000000000 #### 00000000000000
3333333333332222222222222222222222222222222222222222222220000222222222222223333333333333322222
000000000000000000000000000000000000000000000000000000000000C000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-SUBRC
4
0000
4000
L_ATPCB
22222
00000
00000
00000
XMKPF-MBLNR
4900035075
3333333333
4900035075
0000000000
0000000000
XMKPF-MJAHR
2008
3333
2008
0000
0000
BARCODE
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
T003
800WL49AMS XX XXXXXH
3335433445222222222222222222222222225522555554222222
8007C491D3000000000000000000000000008800888888000000
0000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000
KNVV
00000000 000
2222222222222222222222222222222223333333322222222222222222222233322222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
T064B
2222222222222222222222
0000000000000000000000
0000000000000000000000
0000000000000000000000
VGMSEG[]
Table[initial]
No. 9 Ty. FORM
Name BELEG_SICHERN_POST
MAT_AUF_HINWEIS_COPY
2
0
0
0
XLIKP[]
Table IT_392[1x2360]
PROGRAM=SAPMV50ADATA=XLIKP[]
Table reference: 197
TABH+ 0(20) = 082D1E94E0C8119300000000C500000088010000
TABH+ 20(20) = 01000000380900003000000004FC0100D0070000
TABH+ 40( 8) = 04000000C1108001
store = 0x082D1E94
ext1 = 0xE0C81193
shmId = 0 (0x00000000)
id = 197 (0xC5000000)
label = 392 (0x88010000)
fill = 1 (0x01000000)
leng = 2360 (0x38090000)
loop = 48 (0x30000000)
xtyp = TYPE#000027
occu = 4 (0x04000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x18081E94
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 1541 (0x05060000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 4 (0x04000000)
lineAlloc = 4 (0x04000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0xA87F1B94
collHook = 0x00000000
ext2 = 0x28940F93
>>>>> 2nd level extension part <<<<<
tabhBack = 0x70A22B93
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
XLIKP
8000080015203CUSER14 06580920081014 Z0011000LF X20081016200810152008101420081017200
3333333333333455453322222333333333333332222225333333344222533333333333333333333333333333333333
800008001520335352140000006580920081014000000A0011000C6000820081016200810152008101420081017200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
<%_L195>
CVBAP
8000000012132000020T-AS301 T-AS301 0201 Su
3333333333333333333524533322222222222524533322222222222222222222222222222222222222233332222257
80000000121320000204D13301000000000004D1330100000000000000000000000000000000000000002010000035
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
MAT_AUF_HINWEIS_GEPRUEFT
2
0
0
0
<%_L195>-UPDKZ
UPDKZ_DELETE
D
4
4
0
0
IVBPA52_PAGIND
0.0.1.
000
00C
VBUK_KEIN_KREDITCHECK
2
0
0
0
XLIPS[]
Table IT_83[1x3552]
PROGRAM=SAPMV50ADATA=XLIPS[]
Table reference: 50
TABH+ 0(20) = E8F54D93F0282893000000003200000053000000
TABH+ 20(20) = 01000000E00D0000FFFFFFFF0400000080330000
TABH+ 40( 8) = 04000000C1108401
store = 0xE8F54D93
ext1 = 0xF0282893
shmId = 0 (0x00000000)
id = 50 (0x32000000)
label = 83 (0x53000000)
fill = 1 (0x01000000)
leng = 3552 (0xE00D0000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000260
occu = 4 (0x04000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xD0896993
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 410 (0x9A010000)
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 4 (0x04000000)
lineAlloc = 4 (0x04000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = 0xC8402493
collHook = 0x00000000
ext2 = 0x50E41293
>>>>> 2nd level extension part <<<<<
tabhBack = 0xC8532493
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
VBUK_KREDIT_NEUAUFBAU
2
0
0
0
LT_INB_CIFEXT
Table IT_2692[1x476]
PROGRAM=SAPMV50AFORM=BELEG_SICHERN_POSTDATA=LT_INB_CIFEXT
Table reference: 1104
TABH+ 0(20) = C095F993B8301E940000000050040000840A0000
TABH+ 20(20) = 01000000DC010000FFFFFFFF0400000090AC0100
TABH+ 40( 8) = 10000000C1308401
store = 0xC095F993
ext1 = 0xB8301E94
shmId = 0 (0x00000000)
id = 1104 (0x50040000)
label = 2692 (0x840A0000)
fill = 1 (0x01000000)
leng = 476 (0xDC010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#002271
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xF077F993
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 1542 (0x06060000)
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0x70E43294
>>>>> 2nd level extension part <<<<<
tabhBack = 0x70041E94
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
V50AGL-DISPLAY_FROM_ARCHIVE
2
0
0
0
XLIKP-VBELN
0080015203
3333333333
0080015203
0000000000
0000000000
EMKPF
4900035075200800000000000000 ##
3333333333333333333333333333222222222200222222222222222222222222222222222222222222222222222222
4900035075200800000000000000000000000010000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
VBMUE
2222222222222222222
0000000000000000000
0000000000000000000
0000000000000000000
VBSK
0000000000000000000000#### ####
2222222222222222222222222233333333333333333333330000222000022222222222222222222222222222222222
000000000000000000000000000000000000000000000000000C000000C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PACKDATEN_VERBUCHEN
2
0
0
0
No. 8 Ty. FORM
Name BELEG_SICHERN_01
IF_FINAL_CHECK
2
0
0
0
LF_ONLY_FINAL
2
0
0
0
LF_ONLY_PREPARE
2
0
0
0
LF_FLAG_DOCNUM_NEW
2
0
0
0
CF_SUBRC
0
0000
0000
T683V
22222222222222222222222222222222222
00000000000000000000000000000000000
00000000000000000000000000000000000
00000000000000000000000000000000000
SY-XPROG
SAPLBPFC
5454454422222222222222222222222222222222
310C206300000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
IF_RENUMBER
X
5
8
0
0
SPACE
2
0
0
0
XVBPA_FIRSTIND
0.0.1.
000
00C
SY-REPID
SAPMV50A
5454533422222222222222222222222222222222
310D650100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
IF_POST
X
5
8
0
0
SYST-REPID
SAPMV50A
5454533422222222222222222222222222222222
310D650100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
XVBPA_AKTIND
0.0.1.
000
00C
No. 7 Ty. FORM
Name BELEG_SICHERN
%_DUMMY$$
2222
0000
0000
0000
IVBPA2KEY
000000
22333333
00000000
00000000
00000000
IV_FINAL_CHECK_DURCHFUEHREN
2
0
0
0
CHARX
X
5
8
0
0
LF_SUBRC
0
0000
0000
No. 6 Ty. FORM
Name FCODE_SICH_OHNE_CHECK
IVBPA1KEY
000000
33333322
00000000
00000000
00000000
T180-AKTYP
V
5
6
0
0
AKTYP-CREATE
H
4
8
0
0
CVBFA
000000 000000 #### #### 00000000000000 0
2222222222222333333222222222233333320000222000022222222333333333333332222222222222222222222223
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000C000000C00000000000000000000000000000000000000000000000
XSDCTRLFLAG
22
00
00
00
SYST
| ######################################T#######################################µ#########XP####
000000000000000000000000000000800000005000000000000000000000000000000000000010B0001000AF550000
0000100000000000000010601000104000000040006050407000000000000000000000000000C0500010300F800300
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000AF000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000BF00000C
GC_FCODE_PODCANC
ABBR
4445222222222222222222222222222222222222222222222222222222222222222222
1222000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
XSDCTRLFLAG-PROTSAVE
2
0
0
0
YES
X
5
8
0
0
GC_FCODE_PODQUIT
PODQ
5445222222222222222222222222222222222222222222222222222222222222222222
0F41000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
PROTOCOLCALLER-SDL
SDL
5442
34C0
0000
0000
GC_FCODE_PODSTOR
PODS
5445222222222222222222222222222222222222222222222222222222222222222222
0F43000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
LIKP-VBELN
0080015203
3333333333
0080015203
0000000000
0000000000
LIPS-POSNR
000010
333333
000010
000000
000000Hi
As soon as we have started to put things into UPDATE TASK, we must
54 ensure that errors definitely terminate the transaction.
55 MESSAGE A is not sufficient because it can be catched from
56 external callers which COMMIT WORK afterwards, resulting in
57 incomplete updates. Read note 385830 for the full story.
From the above message I think u need to read the not 385830 in tcode snote.
Thx. -
STO - JEX invoice getting created without Post goods issue of delivery
Dear Experts,
We have configured the "Stock Transport Purchase Order" process between 2 different plants within same company code. To satify the Indian legal process, after PGI issue we configured the process as "Proforma" invoice creation using Billing type ZJEX (Copy of JEX). And then Excise Invoice creation using J1IIN.
Now problem we are facing is, without "Post Goods Issue" of delivery ZNL also system is allowing to create the invoice using ZJEX type. We are using the standard NLN item category only. But our requirement is, without "Post goods issue" system should not allow to create the sales invoice.
Can anybody give your suggestion on this issue.
Thank u
Regards,
NagDear Experts,
Thanks for your feedback. As per your suggestion i modified the copying requirement in to "034". But during invoice creation i am getting the message that "The item is not relevant for billing". So not successful.
Can you please give suggestion to solve this issue
Regards,
Nag -
Goods picking and Post goods issue in VL02N
Dear All,
Am hving problem in Picking goods and Post goods issue.
This is for the Stock Transport Order with Delivery via Shipping
Supplying plant is 1000(SAP std,sloc 0001) and Receiving plant 1100(sloc 0001).
Sales org:1000
Distrbn Chnnl:10
Division:00
1.maintained matrial for both the plants.
2.Creted STO by using DOC type as "UB" and item cat "U".
3.And getting the Shipping data for the material in the STO.as shipping point is 1000.
saved the Po.
4.After that i done the GR w/o PO for the material using Mvt type 501.
5.Then,VL10B creating Delivery doc.n this is also created.
6.but when i do the picking and PGI in VL02N there picking field is greyed out bt i have tried to mangae that when i give the picking Qty in the picking qty field system is throwing the following error.
<b>Item to be picked by WM (picking quantity cannot be entered)
Message no. VL118
Diagnosis
For this item, picking is carried out using warehouse management transfer orders since the material is stored in a warehouse with random storage.
System Response
The system does not allow you to enter a picking quantity manually. The picking quantity is copied automatically into the delivery during the creation of the corresponding transfer order.</b>
is any data missed by me while doing this process?
pls let me know n help me in this regrds
Thank you allHi Vijay
By changing storage location you could do b'coz the new storage location is not maintained with warehouse, hence no need to perform warehouse transactions (TO creation and confirmation) before inventory mgmt transactions (PGI).
For trying pick up with WH, first u should have enough stocks in approppriate storage bins and u should perform pick up by creation of TO and confirmation.
warm regards
sairam akundi -
How to fetch post goods issue date and sales order creation date
Hi All,
How to find out the difference between SD Sales Order Item Creation Date and final Post goods issue Date. I would like to know how to fetch those dates and what is the relationship between the tables from which i will get the dates.
Please let me know the solution .
Thanks in advance.Hi,
Sales order creation date is when u raise a sales order in favor of the customer using VA01.......using ATP logic system purposes the material availability date....
after saving ur sales order...when u raise the Delivery using VL01n w.r.t to OR...than u have to perform picking ....In the picking Tab...specify the amount to be picked than press Post Good Issue....means the goods left the company premises ..
You can the fetch the values using tables- Use T code SE12 or SE16
Vbak-----order header
Vbap-----order item
Vbek-----order schedule line
Likp-----Delivery header
Lips----Delivery item -
POST GOODS ISSUE in Delivery Order
Dear Friends:
After going to Delivery Order,Vl02n, I clicked on Post Goods Issue and I am getting this error.
Delivery has not yet been completely processed by WM.
Delivery has not yet been put away / picked (completely)
How to Overcome this problem?
All the help will be greatly apprecaited.
ThanksHi,
What it is telling you is:
Delivery Note first need to be picked. If the storage location used in DN# is of WM managed, (you may verify this in the picking tab of the delivery itself.)....It would show WM relevant and not yet picked as statuses in this tab.
You need to create Transfer Order (TO) pick list for this delivery.
Do it from LT03.
Enter the warehouse number that you would see for this delivery in its picking details in the item.
Enter delivery note.
Hit enter and if everything works fine for you and if you are familiar with WM TO creation, you will be able to create TO and if not setup for auto confirmation, you can do it from LT12.
Once you do these steps, you can do the PGI.
Regards -
Error during Post Goods Issue of delivery
Hello SD experts,
I have an URGENT problem where users at a particular plant have problems in posting goods issue. I happened last Thursday and I desparately need solution before month end for closing activities.
System would send error msg " All HIM materials require quantity conversion. Maintain item 000010". Transaction code used are VL06O and VL02N. Msg no: 03 012.
Diagnosis
There is an item for the delivery that has not been fully processed. The
quantity conversion calculation has not been made. HIM (Hydrocarbon
Inventory Management) materials require that all quantities for all
units of measure defined in the unit of measure group are calculated by
the QCI (Quantity Conversion Interface).
The problem is, there's no problems in posting the particular material form the same plant before this. When I took a look at the Delivery document, I noticed the "Qty in alt UoM" tab in the Item Details screen is blank whereas there should have data in it. I believe these data is automatically derived from master data. Hence, I suspect the Goods issue problem is due to the missing data .
This problem only happens in one plant, for one material whereas this material is active in many other plants.
Anyone of you guys had the same problem and can share the solution with me?
HELP!!
SurianaPlease check Plant customer master reconsilation account properly maintained or not in XD03 transaction.
-
EXIT or BADI for Post Goods Issue
Hello Experts,
I need help in finding a USER EXIT, or BADI to change the contents of MSEG at PGI moment in VL02N.
I'm using version 4.6c.
When I click at Post Goods Issue, I need to insert the customer number at MSEG for certain documents that the standard does not use this field.
Can anyone PLEASE help?
Will reward points!
Thanks a lot and regards,
FernandaHi
Enhancement/ Business Add-in Description
Enhancement
V02V0004
User Exit for Staging Area Determination (Item)
V02V0003
User exit for gate + artl staging area determination (headr)
V02V0002
User exit for storage location determination
V02V0001
Sales area determination for stock transport order
VMDE0004
Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003
Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002
Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001
Shipping Interface: Error Handling - Inbound IDoc
V53W0001
User exits for creating picking waves
V53C0002
W&S: RWE enhancement - shipping material type/time slot
V53C0001
Rough workload calculation in time per item
V50S0001
User Exits for Delivery Processing
V50R0004
Calculation of Stock for POs for Shipping Due Date List
V50R0002
Collective processing for delivery creation
V50R0001
Collective processing for delivery creation
V50Q0001
Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT
Delivery: Item Status Calculation
Business Add-in
DELIVERY_PUBLISH
Announcement of delivery data during database update
If it is helpful rewards points
Regards
Pratap.M -
COPA document not generated when Post Goods Issue is reversed.
Hello Friends,
WE uses Stock Transport Order in two steps for transfering Stock from one plant to another. We have defined a Condition type FRB1 to capture the Freight cost involved in the stock transfer.
When the Post goods issue is done for the Stock Transport Order. following Accounting documents are generated.
Accounting
Profit Center
COPA
Spec. Purpose Ledger
Controlling Document
Material Ledger document.
But When the Post goods issue is reversed through transaction code VL09 all the above documents are generated except for COPA document. Though in controlling document it shows the object type hit is REO i.e profitability Analysis
For further information we have mapped cost element (600150) with Value field in PA transfer structure (Direct assignment from FI and MM. Movement type used for PGI are 641 & 642.
Thank youDear Colleagues
I thank all those who put in thier time and efforts for possible solution for my problem. But I could resolve this issue with help from SAP.
Basically in costing based COPA the system does not post the cost of goods sold to COPA during goods issue but it is done at the time of posting the invoice since the system wants to see the revenues and the COGS values together.
Since the system posts the COGS into COPA at the time of invoice posting, you will appreciate that if this is also done during goods
issue then you will have duplicate entries in your COPA (i.e. the COGS will be doubled).
If in transaction VL01N/VL02N a costing-based line item would be posted, the costs would be double in CO-PA (the billing and goods issue). For this reason, no costing based line items will be created in the standard R/3 system for transaction VL01N/VL02N.
If for some reason you still wish to post the COGS to COPA during goods issue you have to do the same thro a modification of the system.In your case you have applied note 214381 for the same. Please note here that movement type '641' is used as an example. For other movement types you will need to code accordingly.
as per note 337488 point 2. the changes of note 214381 were not required in our case. Therefore we reverted these changes in LKEIIF01 and added the relevant coding for movement type 642 in function COPA_DOCUMENT_CHECK as per note 337488 point 2.
Looking forward for your continued support
Regards
Umesh Gothankar -
VL02N : when I do Post Goods Issue in VL02N, I want to change amount.
hello, everyone.
I have a problem. I need your help.
To explain, when I tranfer a material from A plant to B plant,
first, I create Stock tranfer order( ME21N ).
And I create Delivery document ( VL10B ) with po number.
And I click "Post Goods Issue" in VL02N.
Just at that moment, I want to change the line item amount in the local currency.
because, the line item amount in the local currency is calculated as the move average price of the A plant.
I want to calculate as the move average price of the B plant.
I looked arount too much, but I couldn't find how to change.
You can help me. I hope so. Anything is good.
Please, let me know in detail.
Thanks for reading.
Edited by: Hyun-Sun Choi on Feb 15, 2012 5:44 AMThank you for your answer.
This is the return process.
Just I want to input value in amount in LC.
and I fount badi in LE module.
Again thank you.
Maybe you are looking for
-
Hi there, I have an iPod Touch 3rd generation (Model A1318). For the last several months I keep trying to update to iOs 5 and it gets stuck during the backup phase and an error message pops up: As half of my songs are not iTunes purchases, therefor n
-
HI I am trying to connect my macbook to my Sony bravia tv using mini display to hdmi but my tv keeps telling me that it out of range, i tried changing the display resolution on my Mac but it didin't make any difference any help would be great as gett
-
I went through the entire uninstall process including deleting all my temp files before reinstalling.
-
Problem printing in adobe reader
Hi, I wonder if any one can help me? I am not able to print pdf documents in adobe reader. I keep getting the following error: "pstopdfilter had an i/o error while writing output." I am very new to mac, and a novice in general computing so I have no
-
JOptionPane.showMessageDialog() - word wrapping exceptions?!
Hey ppl, Probably a silly question... I'm currently working with JDBC, and SQLexceptions can be very long! Currently displaying them in a JOptionPane.showMessageDialog() (as i guess most people do?), but being so long they cause it to span the whole