Post Goods Issue before TO Confirmation
Hello,
Is there any possibilities for Post Goods Issue of a delivery document before confirming the TO.
Scenario 1. Delivery 2. Create TO 3. Post Goods Issue 4. Confirmation.
Regards
if the item category in your delivery has a picking relevance, then it is not possible to post a goods issue before picking, since picking quantity is updated when the TO is confirmed.
Why do you want to post it in that illogical sequence?
Similar Messages
-
Post Goods issue after clicking on Load Starting push button
Hi All,
Post goods issue for deliveries, suppose if the shipment document is created for XXXX country do the post goods issue after clicking the push button loading start on. and if the shipment is created other than the XXXX Country do the post goods issue after clicking the shipment start button(Done by Standard SAP).
There will be validation table in background to identify which shipping point to allow Post Goods Issue before shipment completion. This will require enhancement of Delivery User Exit to incorporate above check based on below mentioned Z Table.
Z-Table
- Shipping Point.
- Delivery Type
Any body please suggest the user exit or any function module and how to start code for this particular requirement.
Thanks & Regards,
NarasimhaHi,
You can write your own vaalidation on click of loading start button.
Go to include MV56AI_IS_ENHANCEMENT of program SAPMV56A.
Click on the circular button(Enhance).
Then Edit --> Enhancement Operation --> Create.
Create your enhancement giving it a Z name.
Then in this enhancement you can write your code.
For loading start you can write your code in the following fashion.
IF fcode = 'MM_ST03'.
business logic.....
ENDIF.
Regards,
Firoz. -
ERROR IN POSTING GOODS ISSUE..
HI ALL,
I WANT TO GET INFORMATION FOR HOW TO SOLVE THE ERROR..
WHEN I AM GOING FOR POSTING GOODS ISSUE, BEFORE THAT I MAINTAINED CONTROLLING AREA, COST CENTER, COST ELEMENT FOR MY COMPANY.
SO AFTER THAT I WENT TO MB1A (GOODS ISSUES) TO POST THE GOODS ISSUE THEN IT WAS SHOWING AN ERROR AS " PURCHASE INFO RECORD IS NOT FOUND IN PURCHASE ORGANIZATION"
pleas tell me how to solve this error.
thanksHi!
Just a further hint to the last info offered by Jürgen: This assignment to the standard purchasing organization is made in the customizing, under the IMG path:
Enterprise Structure
-> Assignment
-> Materials Management
-> Assign standard purchasing organization to plant
Please, read the IMG activity documentation linked to this transaction before making the assignment.
I hope this helps you further.
Best regards,
Esther. -
Billing before posting good issue
Hi Experts:
For business reasons I need to bill an OD before posting good issue.
I set the copy control header (From Delivery to Bill), but I found that the OD wasn't shown in trx VF04 .
Afterwards I found that VF04 is filled with the billing index VKDFS, I guess you can find all the OD already posted there.
Could you please advice how can I fix this up.
Thanks.Hi,
I am not sure what the business requirment is but maybe you could use the Pro Forma billing functionailty in SAP, this will allow you to create a pro forma invoice for the delivery without PGI first but will have no financial implications, the invoice will still need to be created later after the PGI is done
Regards
Paul -
Disable Customer-Material Number field during VL02n before post goods issue
Hello SAP gurus,
I would like to ask the possibility of disabling the field "Customer Material Number' during outbound delivery creation.
As we would know, this field (LIPS-KDMAT) will only be disabled after post goods issue.
Will it be possible to disable the field without having to post goods issue first?
Thanks in advance.
JaysonI think you can do with SHD0 screen variant, or else you need to go with userexit to make display field.
-
User Exit for "Serial Number" in VL02N before "Post Goods Issue".
Hi Friends,
Current Scenario:
End User has to scan "Serial Number" for Main Unit (Item CAtegory - TAN) while doing "Outbound Delivery". But, sometimes he forget to do this activity of scanning "Serial Number". And do "Post Goods Issue" without "Serial Number".
Requirement:
When End user will click "Post Goods Issue", system should first check "Serial Number" for Main Unit (Item Category - TAN). If he will not find "Serial Number" then system should give warning message for "Serial Number".
Please suggest the suitable "User Exit" that can be used for above purpose.
Or if there is any other way then let us know.
Regards
Sivahi
check is there any standard User Exit available for VL02N. apply your logic and activate -
Goods picking and Post goods issue in VL02N
Dear All,
Am hving problem in Picking goods and Post goods issue.
This is for the Stock Transport Order with Delivery via Shipping
Supplying plant is 1000(SAP std,sloc 0001) and Receiving plant 1100(sloc 0001).
Sales org:1000
Distrbn Chnnl:10
Division:00
1.maintained matrial for both the plants.
2.Creted STO by using DOC type as "UB" and item cat "U".
3.And getting the Shipping data for the material in the STO.as shipping point is 1000.
saved the Po.
4.After that i done the GR w/o PO for the material using Mvt type 501.
5.Then,VL10B creating Delivery doc.n this is also created.
6.but when i do the picking and PGI in VL02N there picking field is greyed out bt i have tried to mangae that when i give the picking Qty in the picking qty field system is throwing the following error.
<b>Item to be picked by WM (picking quantity cannot be entered)
Message no. VL118
Diagnosis
For this item, picking is carried out using warehouse management transfer orders since the material is stored in a warehouse with random storage.
System Response
The system does not allow you to enter a picking quantity manually. The picking quantity is copied automatically into the delivery during the creation of the corresponding transfer order.</b>
is any data missed by me while doing this process?
pls let me know n help me in this regrds
Thank you allHi Vijay
By changing storage location you could do b'coz the new storage location is not maintained with warehouse, hence no need to perform warehouse transactions (TO creation and confirmation) before inventory mgmt transactions (PGI).
For trying pick up with WH, first u should have enough stocks in approppriate storage bins and u should perform pick up by creation of TO and confirmation.
warm regards
sairam akundi -
Hi all!
my Z program has to pass delivery number to RV_INVOICE_CREATE in order to create debit / credit memo invoice, but before retrieving delivery number, post goods issue must have been done. Any ideas?
Reminding - sequency is like this:
1 Order 2 Delivery 3 Billing
Will award points.
Kind regards,
MindaugasHi,
I worked on similar issue earlier, just try whether my solution will work for you or not ..
1) First check the table 'SHP_IDX_GDSI', to findout whether the PGI done for the delivery or not, The table SHP_IDX_GDSI will store all the deliveries for whose PGI not done.
2) If you are sure that PGI is not done for the delivery then, you can use the below logic, when order quantity is confirmed.
DATA: l_kostk TYPE vbuk-kostk."Picking
*If order quantity is picked completely
*Check the status of picking
SELECT SINGLE kostk FROM vbuk
INTO l_kostk
WHERE vbeln = w_del.
if l_kostk = c_charC.
f_flag2 = c_charx.
else.
clear f_flag2.
endif.
READ TABLE i_idoc_data WITH KEY segnam = c_e1edl18 INTO wa_idoc_data.
IF sy-subrc = 0.
MOVE wa_idoc_data-sdata TO wa_e1edl18.
If its completely delivered
IF f_flag2 = c_charx.
change the qulifier to PGI
wa_e1edl18-qualf = 'PGI'.
else.
clear wa_e1edl18-qualf.
endif.
MOVE wa_e1edl18 TO wa_idoc_data-sdata.
MODIFY i_idoc_data FROM wa_idoc_data
TRANSPORTING sdata WHERE segnam = c_e1edl18.
ENDIF.
CALL FUNCTION 'IDOC_INPUT_DELVRY'
EXPORTING
input_method = w_in_method
mass_processing = w_mass
TABLES
idoc_contrl = idoc_contrl
idoc_data = i_idoc_data
idoc_status = idoc_status
return_variables = return_variables
serialization_info = serialization_info.
Regards,
Donepudi.
Reward, if its helpful. -
When I Press the Post Goods Issue Button for a delivery in SD the error dump appears.
Runtime Errors MESSAGE_TYPE_X
Date and Time 10/15/2008 06:38:52
Short dump has not been completely stored (too big)
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
No RFC destination is defined for SAP Global Trade Services
Long text of error message:
Technical information about the message:
Message class....... "/SAPSLL/PLUGINR3"
Number.............. 002
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLMBWL" or "LMBWLU21"
"MB_POST_GOODS_MOVEMENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "biw7sap"
Network address...... "68.88.249.38"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "BIW7SAP"
Database type..... "ORACLE"
Database name..... "ECS"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Mar 20 2007 00:45:21"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 102
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 26130600
Heap.... 0
Page.... 57344
MM Used. 19070624
MM Free. 785208
User and Transaction
Client.............. 800
User................ "CUSER14"
Language key........ "E"
Transaction......... "VL02N "
Program............. "SAPLMBWL"
Screen.............. "SAPMV50A 1000"
Screen line......... 39
Information on where terminated
Termination occurred in the ABAP program "SAPLMBWL" - in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPMV50A ".
In the source code you have the termination point in line 59
of the (Include) program "LMBWLU21".
Source Code Extract
Line
SourceCde
29
when a goods movement for an inbound or outbound delivery is posted
30
directly from VL31N/ VL01N, XBLNR is not yet known when we call
31
CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32
BKPF as well. There is no other way to forward XBLNR to FI as not
33
every document is posted by MB_CREATE -> a new function module in
34
MBWL for transferring the information, called by FI, meant to load
35
the complete function group for all MBxx postings when this isn't
36
required (Performance). Would be the better way to transport the
37
information after switching off MBxx in later release.
38
corresponding IMPORT ... FROM MEMORY ... can be found in
39
AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40
l_mem_id = 'MKPF-XBLNR'. " 641365
41
EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42
ENDIF.
43
IF xmkpf-xabln IS INITIAL. "note 434093
44
CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
45
ENDIF. "note 434093
46
47
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50
CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51
EXCEPTIONS
52
error_message = 4.
53
As soon as we have started to put things into UPDATE TASK, we must
54
ensure that errors definitely terminate the transaction.
55
MESSAGE A is not sufficient because it can be catched from
56
external callers which COMMIT WORK afterwards, resulting in
57
incomplete updates. Read note 385830 for the full story.
58
IF NOT sy-subrc IS INITIAL.
>>>>>
MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60
sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61
MESSAGE A263.
62
ENDIF.
63
Optische Archivierung
64
Spaete Erfassung mit Barcode
65
Redesign of barcode handling -> note 780365
66
PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
67
xmkpf-mjahr
68
barcode.
69
70
MOVE-CORRESPONDING xmkpf TO emkpf.
71
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
72
EXCEPTIONS
73
error_message = 4.
74
MOVE-CORRESPONDING xmkpf TO emkpf.
75
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
76
EXCEPTIONS
77
error_message = 4.
78
IF NOT sy-subrc IS INITIAL.
Contents of system fields
Name
Val.
SY-SUBRC
4
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
6
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
W0
SY-UCOMM
WABU_T
SY-TITLE
Delivery 80015203 Change: Overview
SY-MSGTY
X
SY-MSGID
/SAPSLL/PLUGINR3
SY-MSGNO
002
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20081015
SY-UZEIT
063852
SY-XPROG
SAPLBPFC
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
10 FUNCTION SAPLMBWL LMBWLU21 59
MB_POST_GOODS_MOVEMENT
9 FORM SAPMV50A FV50XF0B_BELEG_SICHERN 769
BELEG_SICHERN_POST
8 FORM SAPMV50A FV50XF0B_BELEG_SICHERN 86
BELEG_SICHERN_01
7 FORM SAPMV50A FV50XF0B_BELEG_SICHERN 16
BELEG_SICHERN
6 FORM SAPMV50A MV50AF0F_FCODE_SICH_OHNE_CHECK 10
FCODE_SICH_OHNE_CHECK
5 FORM SAPMV50A MV50AF0F_FCODE_WABU 11
FCODE_WABU
4 FORM SAPLV00F LV00FF0F 92
FCODE_BEARBEITEN
3 FUNCTION SAPLV00F LV00FU02 44
SCREEN_SEQUENCE_CONTROL
2 FORM SAPMV50A MV50AF0F_FCODE_BEARBEITEN 62
FCODE_BEARBEITEN
1 MODULE (PAI) SAPMV50A MV50AI0F 52
FCODE_BEARBEITEN
Chosen variables
Name
Val.
No. 10 Ty. FUNCTION
Name MB_POST_GOODS_MOVEMENT
XBLNR_SD
0080015203
3333333333
0080015203
0000000000
0000000000
EMKPF
000000000000000000 ##
2222222222333333333333333333222222222200222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
XMSSA[]
Table IT_589[0x196]
FUNCTION-POOL=MBWLDATA=XMSSA[]
Table reference: 307
TABH+ 0(20) = 00000000200D869300000000330100004D020000
TABH+ 20(20) = 00000000C4000000FFFFFFFF04090300E01B0000
TABH+ 40( 8) = 08000000C1108001
store = 0x00000000
ext1 = 0x200D8693
shmId = 0 (0x00000000)
id = 307 (0x33010000)
label = 589 (0x4D020000)
fill = 0 (0x00000000)
leng = 196 (0xC4000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000134
occu = 8 (0x08000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0xD80C8693
>>>>> 2nd level extension part <<<<<
tabhBack = 0x980C8693
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
RRESWK
22222222222
00000000000
00000000000
00000000000
%_SPACE
2
0
0
0
L_MEM_ID
MKPF-XBLNR
4454254445
DB06D82CE2
0000000000
0000000000
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
RNAME
R
52222
20000
00000
00000
SCREEN
BT_UALL
4555444222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
24F51CC000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IT_RSTRUCT
Table[initial]
XMKPF-XABLN
2222222222
0000000000
0000000000
0000000000
%_DUMMY$$
2222
0000
0000
0000
SYST-REPID
SAPLMBWL
5454445422222222222222222222222222222222
310CD27C00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ODM07M[]
Table[initial]
GT_GOCOMP
000000000000 #### 00000000000000
3333333333332222222222222222222222222222222222222222222220000222222222222223333333333333322222
000000000000000000000000000000000000000000000000000000000000C000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-SUBRC
4
0000
4000
L_ATPCB
22222
00000
00000
00000
XMKPF-MBLNR
4900035075
3333333333
4900035075
0000000000
0000000000
XMKPF-MJAHR
2008
3333
2008
0000
0000
BARCODE
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
T003
800WL49AMS XX XXXXXH
3335433445222222222222222222222222225522555554222222
8007C491D3000000000000000000000000008800888888000000
0000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000
KNVV
00000000 000
2222222222222222222222222222222223333333322222222222222222222233322222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
T064B
2222222222222222222222
0000000000000000000000
0000000000000000000000
0000000000000000000000
VGMSEG[]
Table[initial]
No. 9 Ty. FORM
Name BELEG_SICHERN_POST
MAT_AUF_HINWEIS_COPY
2
0
0
0
XLIKP[]
Table IT_392[1x2360]
PROGRAM=SAPMV50ADATA=XLIKP[]
Table reference: 197
TABH+ 0(20) = 082D1E94E0C8119300000000C500000088010000
TABH+ 20(20) = 01000000380900003000000004FC0100D0070000
TABH+ 40( 8) = 04000000C1108001
store = 0x082D1E94
ext1 = 0xE0C81193
shmId = 0 (0x00000000)
id = 197 (0xC5000000)
label = 392 (0x88010000)
fill = 1 (0x01000000)
leng = 2360 (0x38090000)
loop = 48 (0x30000000)
xtyp = TYPE#000027
occu = 4 (0x04000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x18081E94
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 1541 (0x05060000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 4 (0x04000000)
lineAlloc = 4 (0x04000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0xA87F1B94
collHook = 0x00000000
ext2 = 0x28940F93
>>>>> 2nd level extension part <<<<<
tabhBack = 0x70A22B93
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
XLIKP
8000080015203CUSER14 06580920081014 Z0011000LF X20081016200810152008101420081017200
3333333333333455453322222333333333333332222225333333344222533333333333333333333333333333333333
800008001520335352140000006580920081014000000A0011000C6000820081016200810152008101420081017200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
<%_L195>
CVBAP
8000000012132000020T-AS301 T-AS301 0201 Su
3333333333333333333524533322222222222524533322222222222222222222222222222222222222233332222257
80000000121320000204D13301000000000004D1330100000000000000000000000000000000000000002010000035
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
MAT_AUF_HINWEIS_GEPRUEFT
2
0
0
0
<%_L195>-UPDKZ
UPDKZ_DELETE
D
4
4
0
0
IVBPA52_PAGIND
0.0.1.
000
00C
VBUK_KEIN_KREDITCHECK
2
0
0
0
XLIPS[]
Table IT_83[1x3552]
PROGRAM=SAPMV50ADATA=XLIPS[]
Table reference: 50
TABH+ 0(20) = E8F54D93F0282893000000003200000053000000
TABH+ 20(20) = 01000000E00D0000FFFFFFFF0400000080330000
TABH+ 40( 8) = 04000000C1108401
store = 0xE8F54D93
ext1 = 0xF0282893
shmId = 0 (0x00000000)
id = 50 (0x32000000)
label = 83 (0x53000000)
fill = 1 (0x01000000)
leng = 3552 (0xE00D0000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000260
occu = 4 (0x04000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xD0896993
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 410 (0x9A010000)
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 4 (0x04000000)
lineAlloc = 4 (0x04000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = 0xC8402493
collHook = 0x00000000
ext2 = 0x50E41293
>>>>> 2nd level extension part <<<<<
tabhBack = 0xC8532493
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
VBUK_KREDIT_NEUAUFBAU
2
0
0
0
LT_INB_CIFEXT
Table IT_2692[1x476]
PROGRAM=SAPMV50AFORM=BELEG_SICHERN_POSTDATA=LT_INB_CIFEXT
Table reference: 1104
TABH+ 0(20) = C095F993B8301E940000000050040000840A0000
TABH+ 20(20) = 01000000DC010000FFFFFFFF0400000090AC0100
TABH+ 40( 8) = 10000000C1308401
store = 0xC095F993
ext1 = 0xB8301E94
shmId = 0 (0x00000000)
id = 1104 (0x50040000)
label = 2692 (0x840A0000)
fill = 1 (0x01000000)
leng = 476 (0xDC010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#002271
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xF077F993
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 1542 (0x06060000)
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0x70E43294
>>>>> 2nd level extension part <<<<<
tabhBack = 0x70041E94
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
V50AGL-DISPLAY_FROM_ARCHIVE
2
0
0
0
XLIKP-VBELN
0080015203
3333333333
0080015203
0000000000
0000000000
EMKPF
4900035075200800000000000000 ##
3333333333333333333333333333222222222200222222222222222222222222222222222222222222222222222222
4900035075200800000000000000000000000010000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
VBMUE
2222222222222222222
0000000000000000000
0000000000000000000
0000000000000000000
VBSK
0000000000000000000000#### ####
2222222222222222222222222233333333333333333333330000222000022222222222222222222222222222222222
000000000000000000000000000000000000000000000000000C000000C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PACKDATEN_VERBUCHEN
2
0
0
0
No. 8 Ty. FORM
Name BELEG_SICHERN_01
IF_FINAL_CHECK
2
0
0
0
LF_ONLY_FINAL
2
0
0
0
LF_ONLY_PREPARE
2
0
0
0
LF_FLAG_DOCNUM_NEW
2
0
0
0
CF_SUBRC
0
0000
0000
T683V
22222222222222222222222222222222222
00000000000000000000000000000000000
00000000000000000000000000000000000
00000000000000000000000000000000000
SY-XPROG
SAPLBPFC
5454454422222222222222222222222222222222
310C206300000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
IF_RENUMBER
X
5
8
0
0
SPACE
2
0
0
0
XVBPA_FIRSTIND
0.0.1.
000
00C
SY-REPID
SAPMV50A
5454533422222222222222222222222222222222
310D650100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
IF_POST
X
5
8
0
0
SYST-REPID
SAPMV50A
5454533422222222222222222222222222222222
310D650100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
XVBPA_AKTIND
0.0.1.
000
00C
No. 7 Ty. FORM
Name BELEG_SICHERN
%_DUMMY$$
2222
0000
0000
0000
IVBPA2KEY
000000
22333333
00000000
00000000
00000000
IV_FINAL_CHECK_DURCHFUEHREN
2
0
0
0
CHARX
X
5
8
0
0
LF_SUBRC
0
0000
0000
No. 6 Ty. FORM
Name FCODE_SICH_OHNE_CHECK
IVBPA1KEY
000000
33333322
00000000
00000000
00000000
T180-AKTYP
V
5
6
0
0
AKTYP-CREATE
H
4
8
0
0
CVBFA
000000 000000 #### #### 00000000000000 0
2222222222222333333222222222233333320000222000022222222333333333333332222222222222222222222223
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000C000000C00000000000000000000000000000000000000000000000
XSDCTRLFLAG
22
00
00
00
SYST
| ######################################T#######################################µ#########XP####
000000000000000000000000000000800000005000000000000000000000000000000000000010B0001000AF550000
0000100000000000000010601000104000000040006050407000000000000000000000000000C0500010300F800300
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000AF000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000BF00000C
GC_FCODE_PODCANC
ABBR
4445222222222222222222222222222222222222222222222222222222222222222222
1222000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
XSDCTRLFLAG-PROTSAVE
2
0
0
0
YES
X
5
8
0
0
GC_FCODE_PODQUIT
PODQ
5445222222222222222222222222222222222222222222222222222222222222222222
0F41000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
PROTOCOLCALLER-SDL
SDL
5442
34C0
0000
0000
GC_FCODE_PODSTOR
PODS
5445222222222222222222222222222222222222222222222222222222222222222222
0F43000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
LIKP-VBELN
0080015203
3333333333
0080015203
0000000000
0000000000
LIPS-POSNR
000010
333333
000010
000000
000000Hi
As soon as we have started to put things into UPDATE TASK, we must
54 ensure that errors definitely terminate the transaction.
55 MESSAGE A is not sufficient because it can be catched from
56 external callers which COMMIT WORK afterwards, resulting in
57 incomplete updates. Read note 385830 for the full story.
From the above message I think u need to read the not 385830 in tcode snote.
Thx. -
Post Goods Receipt before putaway
Hi Experts,
We're planning to implement SAP WM of SAP ECC 6.0. We're using inbound delivery for our goods receiving into the warehouse. The process steps that I found out from the SAP document is as follows:
1. Create inbound delivery
2. Pack if necessary
3. Putaway
4. Confirm Putaway
5. Post Goods Receipt
We've business requirement to do the Post Goods Receipt before putaway.
I do not find the configuration for this requirement.
Could some-one help me on this? Any help on this would be greatly appreciated.
Please send me the documents how to configure this.
Thank you.
with regards,
Muthu Ganapathy.Hi Philip,
Thank you for your response. I have found-out the same option as you mentioned from the 4.6c release notes. I tried and it's still not working. Don't know the cause for not working. Any thought on this? Please let me know.
Thank you again,
with regards,
Muthu Ganapathy. -
Accounting Document not generated after Post goods issue in delivery order.
Dear Experts
Greeting of the daays,
Need your help on below issue.
After making the post goods issue ,the system is not making the accounting document.
The error given by the system is as follows:
Material document 12365 does not include an accounting document
Diagnosis
The system cannot find an accounting document for the material document 12365.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
__Solution what I tried to solve this issue ,but not successful.__
__Solution 1- maintain OMS2__
__Solution 2 - maintain OMJJ- movement type 601 - PRCTR is required entry.__
__Solution 3 - price maintain is material master.__
__Solution 4 - OBYC - BSX - 7920 - GLA/c and GBB- VAX and VAY - 7920 GLA/c.__
__Pls let me know if there is any confirgation is missing.__Hi
Do this checks:
In tcode OBYC check if you have the proper entries.
Go to tcode OKB9 and do the settings for the G/L acc. that you have in OBYC.
To populate PRCTR you can use OKB9 and you can check if you have values in MARC-PRCTR.
I hope this helps you
Regards
Eduardo -
POST GOODS ISSUE in Delivery Order
Dear Friends:
After going to Delivery Order,Vl02n, I clicked on Post Goods Issue and I am getting this error.
Delivery has not yet been completely processed by WM.
Delivery has not yet been put away / picked (completely)
How to Overcome this problem?
All the help will be greatly apprecaited.
ThanksHi,
What it is telling you is:
Delivery Note first need to be picked. If the storage location used in DN# is of WM managed, (you may verify this in the picking tab of the delivery itself.)....It would show WM relevant and not yet picked as statuses in this tab.
You need to create Transfer Order (TO) pick list for this delivery.
Do it from LT03.
Enter the warehouse number that you would see for this delivery in its picking details in the item.
Enter delivery note.
Hit enter and if everything works fine for you and if you are familiar with WM TO creation, you will be able to create TO and if not setup for auto confirmation, you can do it from LT12.
Once you do these steps, you can do the PGI.
Regards -
Error during Post Goods Issue of delivery
Hello SD experts,
I have an URGENT problem where users at a particular plant have problems in posting goods issue. I happened last Thursday and I desparately need solution before month end for closing activities.
System would send error msg " All HIM materials require quantity conversion. Maintain item 000010". Transaction code used are VL06O and VL02N. Msg no: 03 012.
Diagnosis
There is an item for the delivery that has not been fully processed. The
quantity conversion calculation has not been made. HIM (Hydrocarbon
Inventory Management) materials require that all quantities for all
units of measure defined in the unit of measure group are calculated by
the QCI (Quantity Conversion Interface).
The problem is, there's no problems in posting the particular material form the same plant before this. When I took a look at the Delivery document, I noticed the "Qty in alt UoM" tab in the Item Details screen is blank whereas there should have data in it. I believe these data is automatically derived from master data. Hence, I suspect the Goods issue problem is due to the missing data .
This problem only happens in one plant, for one material whereas this material is active in many other plants.
Anyone of you guys had the same problem and can share the solution with me?
HELP!!
SurianaPlease check Plant customer master reconsilation account properly maintained or not in XD03 transaction.
-
hi
I'm doing a delivery using vl01n bt at post goods issue its showing run time error.the error message details gvn below.
Information on where terminated
Termination occurred in the ABAP program "SAPLMBWL" - in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPMV50A ".
In the source code you have the termination point in line 59
of the (Include) program "LMBWLU21".
Source Code Extract
Line SourceCde
29 * when a goods movement for an inbound or outbound delivery is posted
30 * directly from VL31N/ VL01N, XBLNR is not yet known when we call
31 * CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32 * BKPF as well. There is no other way to forward XBLNR to FI as not
33 * every document is posted by MB_CREATE -> a new function module in
34 * MBWL for transferring the information, called by FI, meant to load
35 * the complete function group for all MBxx postings when this isn't
36 * required (Performance). Would be the better way to transport the
37 * information after switching off MBxx in later release.
38 * corresponding IMPORT ... FROM MEMORY ... can be found in
39 * AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40 l_mem_id = 'MKPF-XBLNR'. " 641365
41 EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42 ENDIF.
43 IF xmkpf-xabln IS INITIAL. "note 434093
44 CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
45 ENDIF. "note 434093
46
47 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50 CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51 EXCEPTIONS
52 error_message = 4.
53 * As soon as we have started to put things into UPDATE TASK, we must
54 * ensure that errors definitely terminate the transaction.
55 * MESSAGE A is not sufficient because it can be catched from
56 * external callers which COMMIT WORK afterwards, resulting in
57 * incomplete updates. Read note 385830 for the full story.
58 IF NOT sy-subrc IS INITIAL.
>>>>> MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61 * MESSAGE A263.
62 ENDIF.
plz tell me the configuration steps for post goods issue in SD if applicable.Hi Lakshmipati,
I have maintained movement type 601 at OMJJ. I hav also added the filed cost center in that (before it was not available).
I checked GL acct at fs00, it is already contain field status group g004 and the check box "post automaticallyt" is also activated. The cost element has also assigned to cost center. After assigning the cost center to cost element, the error is changed to fld selection for mvmt type 601/ acct 300021 differs for cost center
But i noticed one thing: If i chage the field status group to g006, the error has not appeared and giving the other error:
valuation area xxx2 (plant) not yet ptoductive with material ledger this error has been already posted by me but not yet received correct answer.
Kindly provide the solution for this.
Regads
Sabera -
Problem with post goods issue in SD std. delivery
hi
while doing post goods issue of a delivery in VL01n its showing run time error. the error message is gvn below.
Information on where terminated
Termination occurred in the ABAP program "SAPLMBWL" - in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPMV50A ".
In the source code you have the termination point in line 59
of the (Include) program "LMBWLU21".
Source Code Extract
Line SourceCde
29 * when a goods movement for an inbound or outbound delivery is posted
30 * directly from VL31N/ VL01N, XBLNR is not yet known when we call
31 * CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32 * BKPF as well. There is no other way to forward XBLNR to FI as not
33 * every document is posted by MB_CREATE -> a new function module in
34 * MBWL for transferring the information, called by FI, meant to load
35 * the complete function group for all MBxx postings when this isn't
36 * required (Performance). Would be the better way to transport the
37 * information after switching off MBxx in later release.
38 * corresponding IMPORT ... FROM MEMORY ... can be found in
39 * AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40 l_mem_id = 'MKPF-XBLNR'. " 641365
41 EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42 ENDIF.
43 IF xmkpf-xabln IS INITIAL. "note 434093
44 CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
45 ENDIF. "note 434093
46
47 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50 CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51 EXCEPTIONS
52 error_message = 4.
53 * As soon as we have started to put things into UPDATE TASK, we must
54 * ensure that errors definitely terminate the transaction.
55 * MESSAGE A is not sufficient because it can be catched from
56 * external callers which COMMIT WORK afterwards, resulting in
57 * incomplete updates. Read note 385830 for the full story.
58 IF NOT sy-subrc IS INITIAL.
>>>>> MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61 * MESSAGE A263.
62 ENDIF.
if there is any configuration step for post goods issue in SD thn plz mention it.
Plz help..Hi Lakshmipati,
I have maintained movement type 601 at OMJJ. I hav also added the filed cost center in that (before it was not available).
I checked GL acct at fs00, it is already contain field status group g004 and the check box "post automaticallyt" is also activated. The cost element has also assigned to cost center. After assigning the cost center to cost element, the error is changed to fld selection for mvmt type 601/ acct 300021 differs for cost center
But i noticed one thing: If i chage the field status group to g006, the error has not appeared and giving the other error:
valuation area xxx2 (plant) not yet ptoductive with material ledger this error has been already posted by me but not yet received correct answer.
Kindly provide the solution for this.
Regads
Sabera
Maybe you are looking for
-
How can I limit the User not to create OPPT for a given BP grouping
Hi , We did create a Business Partner grouping (BUT000-BU_GROUP) and wish to block the user to create an Opportunity ( Transaction Type OPPT ) for this Business Partner grouping ? How can we do that ?
-
Unable to boot from ODD or USB after windows 8.1 update on P850-31L
Hi I just updated a P850-31L to windows 8.1 from windows 8 through the windows store. Before the update I was able to boot from a USB drive by pressing F12 during start up. After the update I was no longer able to boot from the USB drive. Selecting t
-
How to add external css file from _edge.js file
I have tried to add in html page, but when I save edge project it removes it. I am able to add external js file in scripts:[] in _edge.js file What we can add inside resources:[] ? And is there any way to add external css in edge files except in html
-
I just get a new phone I wait to pie a song and my phone said this is your first purchase on this device so you have to answer these two security questions but I don't know what the answers are to the question I forget so how do I change them so I ca
-
Airport utility only shows disc and not airplay
airport utility only shows disc and not airplay