Post goods issue failed because of serial number
in outbound delivery,post goods issue failed because of serial number,but this serial number was not assigned to any other material
Hello,
Check the serial number and material with IQ03. Serial number is material specific.
Prase
Similar Messages
-
User Exit for "Serial Number" in VL02N before "Post Goods Issue".
Hi Friends,
Current Scenario:
End User has to scan "Serial Number" for Main Unit (Item CAtegory - TAN) while doing "Outbound Delivery". But, sometimes he forget to do this activity of scanning "Serial Number". And do "Post Goods Issue" without "Serial Number".
Requirement:
When End user will click "Post Goods Issue", system should first check "Serial Number" for Main Unit (Item Category - TAN). If he will not find "Serial Number" then system should give warning message for "Serial Number".
Please suggest the suitable "User Exit" that can be used for above purpose.
Or if there is any other way then let us know.
Regards
Sivahi
check is there any standard User Exit available for VL02N. apply your logic and activate -
Disable Customer-Material Number field during VL02n before post goods issue
Hello SAP gurus,
I would like to ask the possibility of disabling the field "Customer Material Number' during outbound delivery creation.
As we would know, this field (LIPS-KDMAT) will only be disabled after post goods issue.
Will it be possible to disable the field without having to post goods issue first?
Thanks in advance.
JaysonI think you can do with SHD0 screen variant, or else you need to go with userexit to make display field.
-
Failing Idoc Based on Posts Goods Issue
Hi experts,
I have a requirement where I need to check whether a STO exists for the idoc PORDCR102. Another requirement is to check Post Goods Issue is present. If STO exists and PGI exists, I need to fail the idoc. How to do this(both failing idoc and checking how PGI exists). I am using the user exit EXIT_SAPL2012_001 for this purpose.
Regards,
SajithBelow are the inbound function module which in turn are calling the bapis to post the document
IDOC_INPUT_PORDCR1 calls BAPI_PO_CREATE1
IDOC_INPUT_PORDCR calls BAPI_PO_CREATE
Search for a exit in BAPI ...which will serve you requirement ....ie. in turn throw a error message if the bapi throws a message the idoc will fail...! -
When I Press the Post Goods Issue Button for a delivery in SD the error dump appears.
Runtime Errors MESSAGE_TYPE_X
Date and Time 10/15/2008 06:38:52
Short dump has not been completely stored (too big)
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
No RFC destination is defined for SAP Global Trade Services
Long text of error message:
Technical information about the message:
Message class....... "/SAPSLL/PLUGINR3"
Number.............. 002
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLMBWL" or "LMBWLU21"
"MB_POST_GOODS_MOVEMENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "biw7sap"
Network address...... "68.88.249.38"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "BIW7SAP"
Database type..... "ORACLE"
Database name..... "ECS"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Mar 20 2007 00:45:21"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 102
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 26130600
Heap.... 0
Page.... 57344
MM Used. 19070624
MM Free. 785208
User and Transaction
Client.............. 800
User................ "CUSER14"
Language key........ "E"
Transaction......... "VL02N "
Program............. "SAPLMBWL"
Screen.............. "SAPMV50A 1000"
Screen line......... 39
Information on where terminated
Termination occurred in the ABAP program "SAPLMBWL" - in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPMV50A ".
In the source code you have the termination point in line 59
of the (Include) program "LMBWLU21".
Source Code Extract
Line
SourceCde
29
when a goods movement for an inbound or outbound delivery is posted
30
directly from VL31N/ VL01N, XBLNR is not yet known when we call
31
CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32
BKPF as well. There is no other way to forward XBLNR to FI as not
33
every document is posted by MB_CREATE -> a new function module in
34
MBWL for transferring the information, called by FI, meant to load
35
the complete function group for all MBxx postings when this isn't
36
required (Performance). Would be the better way to transport the
37
information after switching off MBxx in later release.
38
corresponding IMPORT ... FROM MEMORY ... can be found in
39
AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40
l_mem_id = 'MKPF-XBLNR'. " 641365
41
EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42
ENDIF.
43
IF xmkpf-xabln IS INITIAL. "note 434093
44
CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
45
ENDIF. "note 434093
46
47
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50
CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51
EXCEPTIONS
52
error_message = 4.
53
As soon as we have started to put things into UPDATE TASK, we must
54
ensure that errors definitely terminate the transaction.
55
MESSAGE A is not sufficient because it can be catched from
56
external callers which COMMIT WORK afterwards, resulting in
57
incomplete updates. Read note 385830 for the full story.
58
IF NOT sy-subrc IS INITIAL.
>>>>>
MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60
sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61
MESSAGE A263.
62
ENDIF.
63
Optische Archivierung
64
Spaete Erfassung mit Barcode
65
Redesign of barcode handling -> note 780365
66
PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
67
xmkpf-mjahr
68
barcode.
69
70
MOVE-CORRESPONDING xmkpf TO emkpf.
71
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
72
EXCEPTIONS
73
error_message = 4.
74
MOVE-CORRESPONDING xmkpf TO emkpf.
75
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
76
EXCEPTIONS
77
error_message = 4.
78
IF NOT sy-subrc IS INITIAL.
Contents of system fields
Name
Val.
SY-SUBRC
4
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
6
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
W0
SY-UCOMM
WABU_T
SY-TITLE
Delivery 80015203 Change: Overview
SY-MSGTY
X
SY-MSGID
/SAPSLL/PLUGINR3
SY-MSGNO
002
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20081015
SY-UZEIT
063852
SY-XPROG
SAPLBPFC
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
10 FUNCTION SAPLMBWL LMBWLU21 59
MB_POST_GOODS_MOVEMENT
9 FORM SAPMV50A FV50XF0B_BELEG_SICHERN 769
BELEG_SICHERN_POST
8 FORM SAPMV50A FV50XF0B_BELEG_SICHERN 86
BELEG_SICHERN_01
7 FORM SAPMV50A FV50XF0B_BELEG_SICHERN 16
BELEG_SICHERN
6 FORM SAPMV50A MV50AF0F_FCODE_SICH_OHNE_CHECK 10
FCODE_SICH_OHNE_CHECK
5 FORM SAPMV50A MV50AF0F_FCODE_WABU 11
FCODE_WABU
4 FORM SAPLV00F LV00FF0F 92
FCODE_BEARBEITEN
3 FUNCTION SAPLV00F LV00FU02 44
SCREEN_SEQUENCE_CONTROL
2 FORM SAPMV50A MV50AF0F_FCODE_BEARBEITEN 62
FCODE_BEARBEITEN
1 MODULE (PAI) SAPMV50A MV50AI0F 52
FCODE_BEARBEITEN
Chosen variables
Name
Val.
No. 10 Ty. FUNCTION
Name MB_POST_GOODS_MOVEMENT
XBLNR_SD
0080015203
3333333333
0080015203
0000000000
0000000000
EMKPF
000000000000000000 ##
2222222222333333333333333333222222222200222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
XMSSA[]
Table IT_589[0x196]
FUNCTION-POOL=MBWLDATA=XMSSA[]
Table reference: 307
TABH+ 0(20) = 00000000200D869300000000330100004D020000
TABH+ 20(20) = 00000000C4000000FFFFFFFF04090300E01B0000
TABH+ 40( 8) = 08000000C1108001
store = 0x00000000
ext1 = 0x200D8693
shmId = 0 (0x00000000)
id = 307 (0x33010000)
label = 589 (0x4D020000)
fill = 0 (0x00000000)
leng = 196 (0xC4000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000134
occu = 8 (0x08000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0xD80C8693
>>>>> 2nd level extension part <<<<<
tabhBack = 0x980C8693
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
RRESWK
22222222222
00000000000
00000000000
00000000000
%_SPACE
2
0
0
0
L_MEM_ID
MKPF-XBLNR
4454254445
DB06D82CE2
0000000000
0000000000
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
RNAME
R
52222
20000
00000
00000
SCREEN
BT_UALL
4555444222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
24F51CC000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IT_RSTRUCT
Table[initial]
XMKPF-XABLN
2222222222
0000000000
0000000000
0000000000
%_DUMMY$$
2222
0000
0000
0000
SYST-REPID
SAPLMBWL
5454445422222222222222222222222222222222
310CD27C00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ODM07M[]
Table[initial]
GT_GOCOMP
000000000000 #### 00000000000000
3333333333332222222222222222222222222222222222222222222220000222222222222223333333333333322222
000000000000000000000000000000000000000000000000000000000000C000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-SUBRC
4
0000
4000
L_ATPCB
22222
00000
00000
00000
XMKPF-MBLNR
4900035075
3333333333
4900035075
0000000000
0000000000
XMKPF-MJAHR
2008
3333
2008
0000
0000
BARCODE
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
T003
800WL49AMS XX XXXXXH
3335433445222222222222222222222222225522555554222222
8007C491D3000000000000000000000000008800888888000000
0000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000
KNVV
00000000 000
2222222222222222222222222222222223333333322222222222222222222233322222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
T064B
2222222222222222222222
0000000000000000000000
0000000000000000000000
0000000000000000000000
VGMSEG[]
Table[initial]
No. 9 Ty. FORM
Name BELEG_SICHERN_POST
MAT_AUF_HINWEIS_COPY
2
0
0
0
XLIKP[]
Table IT_392[1x2360]
PROGRAM=SAPMV50ADATA=XLIKP[]
Table reference: 197
TABH+ 0(20) = 082D1E94E0C8119300000000C500000088010000
TABH+ 20(20) = 01000000380900003000000004FC0100D0070000
TABH+ 40( 8) = 04000000C1108001
store = 0x082D1E94
ext1 = 0xE0C81193
shmId = 0 (0x00000000)
id = 197 (0xC5000000)
label = 392 (0x88010000)
fill = 1 (0x01000000)
leng = 2360 (0x38090000)
loop = 48 (0x30000000)
xtyp = TYPE#000027
occu = 4 (0x04000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x18081E94
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 1541 (0x05060000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 4 (0x04000000)
lineAlloc = 4 (0x04000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0xA87F1B94
collHook = 0x00000000
ext2 = 0x28940F93
>>>>> 2nd level extension part <<<<<
tabhBack = 0x70A22B93
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
XLIKP
8000080015203CUSER14 06580920081014 Z0011000LF X20081016200810152008101420081017200
3333333333333455453322222333333333333332222225333333344222533333333333333333333333333333333333
800008001520335352140000006580920081014000000A0011000C6000820081016200810152008101420081017200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
<%_L195>
CVBAP
8000000012132000020T-AS301 T-AS301 0201 Su
3333333333333333333524533322222222222524533322222222222222222222222222222222222222233332222257
80000000121320000204D13301000000000004D1330100000000000000000000000000000000000000002010000035
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
MAT_AUF_HINWEIS_GEPRUEFT
2
0
0
0
<%_L195>-UPDKZ
UPDKZ_DELETE
D
4
4
0
0
IVBPA52_PAGIND
0.0.1.
000
00C
VBUK_KEIN_KREDITCHECK
2
0
0
0
XLIPS[]
Table IT_83[1x3552]
PROGRAM=SAPMV50ADATA=XLIPS[]
Table reference: 50
TABH+ 0(20) = E8F54D93F0282893000000003200000053000000
TABH+ 20(20) = 01000000E00D0000FFFFFFFF0400000080330000
TABH+ 40( 8) = 04000000C1108401
store = 0xE8F54D93
ext1 = 0xF0282893
shmId = 0 (0x00000000)
id = 50 (0x32000000)
label = 83 (0x53000000)
fill = 1 (0x01000000)
leng = 3552 (0xE00D0000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000260
occu = 4 (0x04000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xD0896993
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 410 (0x9A010000)
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 4 (0x04000000)
lineAlloc = 4 (0x04000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = 0xC8402493
collHook = 0x00000000
ext2 = 0x50E41293
>>>>> 2nd level extension part <<<<<
tabhBack = 0xC8532493
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
VBUK_KREDIT_NEUAUFBAU
2
0
0
0
LT_INB_CIFEXT
Table IT_2692[1x476]
PROGRAM=SAPMV50AFORM=BELEG_SICHERN_POSTDATA=LT_INB_CIFEXT
Table reference: 1104
TABH+ 0(20) = C095F993B8301E940000000050040000840A0000
TABH+ 20(20) = 01000000DC010000FFFFFFFF0400000090AC0100
TABH+ 40( 8) = 10000000C1308401
store = 0xC095F993
ext1 = 0xB8301E94
shmId = 0 (0x00000000)
id = 1104 (0x50040000)
label = 2692 (0x840A0000)
fill = 1 (0x01000000)
leng = 476 (0xDC010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#002271
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xF077F993
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 1542 (0x06060000)
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0x70E43294
>>>>> 2nd level extension part <<<<<
tabhBack = 0x70041E94
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
V50AGL-DISPLAY_FROM_ARCHIVE
2
0
0
0
XLIKP-VBELN
0080015203
3333333333
0080015203
0000000000
0000000000
EMKPF
4900035075200800000000000000 ##
3333333333333333333333333333222222222200222222222222222222222222222222222222222222222222222222
4900035075200800000000000000000000000010000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
VBMUE
2222222222222222222
0000000000000000000
0000000000000000000
0000000000000000000
VBSK
0000000000000000000000#### ####
2222222222222222222222222233333333333333333333330000222000022222222222222222222222222222222222
000000000000000000000000000000000000000000000000000C000000C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PACKDATEN_VERBUCHEN
2
0
0
0
No. 8 Ty. FORM
Name BELEG_SICHERN_01
IF_FINAL_CHECK
2
0
0
0
LF_ONLY_FINAL
2
0
0
0
LF_ONLY_PREPARE
2
0
0
0
LF_FLAG_DOCNUM_NEW
2
0
0
0
CF_SUBRC
0
0000
0000
T683V
22222222222222222222222222222222222
00000000000000000000000000000000000
00000000000000000000000000000000000
00000000000000000000000000000000000
SY-XPROG
SAPLBPFC
5454454422222222222222222222222222222222
310C206300000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
IF_RENUMBER
X
5
8
0
0
SPACE
2
0
0
0
XVBPA_FIRSTIND
0.0.1.
000
00C
SY-REPID
SAPMV50A
5454533422222222222222222222222222222222
310D650100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
IF_POST
X
5
8
0
0
SYST-REPID
SAPMV50A
5454533422222222222222222222222222222222
310D650100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
XVBPA_AKTIND
0.0.1.
000
00C
No. 7 Ty. FORM
Name BELEG_SICHERN
%_DUMMY$$
2222
0000
0000
0000
IVBPA2KEY
000000
22333333
00000000
00000000
00000000
IV_FINAL_CHECK_DURCHFUEHREN
2
0
0
0
CHARX
X
5
8
0
0
LF_SUBRC
0
0000
0000
No. 6 Ty. FORM
Name FCODE_SICH_OHNE_CHECK
IVBPA1KEY
000000
33333322
00000000
00000000
00000000
T180-AKTYP
V
5
6
0
0
AKTYP-CREATE
H
4
8
0
0
CVBFA
000000 000000 #### #### 00000000000000 0
2222222222222333333222222222233333320000222000022222222333333333333332222222222222222222222223
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000C000000C00000000000000000000000000000000000000000000000
XSDCTRLFLAG
22
00
00
00
SYST
| ######################################T#######################################µ#########XP####
000000000000000000000000000000800000005000000000000000000000000000000000000010B0001000AF550000
0000100000000000000010601000104000000040006050407000000000000000000000000000C0500010300F800300
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000AF000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000BF00000C
GC_FCODE_PODCANC
ABBR
4445222222222222222222222222222222222222222222222222222222222222222222
1222000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
XSDCTRLFLAG-PROTSAVE
2
0
0
0
YES
X
5
8
0
0
GC_FCODE_PODQUIT
PODQ
5445222222222222222222222222222222222222222222222222222222222222222222
0F41000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
PROTOCOLCALLER-SDL
SDL
5442
34C0
0000
0000
GC_FCODE_PODSTOR
PODS
5445222222222222222222222222222222222222222222222222222222222222222222
0F43000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
LIKP-VBELN
0080015203
3333333333
0080015203
0000000000
0000000000
LIPS-POSNR
000010
333333
000010
000000
000000Hi
As soon as we have started to put things into UPDATE TASK, we must
54 ensure that errors definitely terminate the transaction.
55 MESSAGE A is not sufficient because it can be catched from
56 external callers which COMMIT WORK afterwards, resulting in
57 incomplete updates. Read note 385830 for the full story.
From the above message I think u need to read the not 385830 in tcode snote.
Thx. -
VL02N : when I do Post Goods Issue in VL02N, I want to change amount.
hello, everyone.
I have a problem. I need your help.
To explain, when I tranfer a material from A plant to B plant,
first, I create Stock tranfer order( ME21N ).
And I create Delivery document ( VL10B ) with po number.
And I click "Post Goods Issue" in VL02N.
Just at that moment, I want to change the line item amount in the local currency.
because, the line item amount in the local currency is calculated as the move average price of the A plant.
I want to calculate as the move average price of the B plant.
I looked arount too much, but I couldn't find how to change.
You can help me. I hope so. Anything is good.
Please, let me know in detail.
Thanks for reading.
Edited by: Hyun-Sun Choi on Feb 15, 2012 5:44 AMThank you for your answer.
This is the return process.
Just I want to input value in amount in LC.
and I fount badi in LE module.
Again thank you. -
hi
I'm doing a delivery using vl01n bt at post goods issue its showing run time error.the error message details gvn below.
Information on where terminated
Termination occurred in the ABAP program "SAPLMBWL" - in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPMV50A ".
In the source code you have the termination point in line 59
of the (Include) program "LMBWLU21".
Source Code Extract
Line SourceCde
29 * when a goods movement for an inbound or outbound delivery is posted
30 * directly from VL31N/ VL01N, XBLNR is not yet known when we call
31 * CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32 * BKPF as well. There is no other way to forward XBLNR to FI as not
33 * every document is posted by MB_CREATE -> a new function module in
34 * MBWL for transferring the information, called by FI, meant to load
35 * the complete function group for all MBxx postings when this isn't
36 * required (Performance). Would be the better way to transport the
37 * information after switching off MBxx in later release.
38 * corresponding IMPORT ... FROM MEMORY ... can be found in
39 * AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40 l_mem_id = 'MKPF-XBLNR'. " 641365
41 EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42 ENDIF.
43 IF xmkpf-xabln IS INITIAL. "note 434093
44 CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
45 ENDIF. "note 434093
46
47 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50 CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51 EXCEPTIONS
52 error_message = 4.
53 * As soon as we have started to put things into UPDATE TASK, we must
54 * ensure that errors definitely terminate the transaction.
55 * MESSAGE A is not sufficient because it can be catched from
56 * external callers which COMMIT WORK afterwards, resulting in
57 * incomplete updates. Read note 385830 for the full story.
58 IF NOT sy-subrc IS INITIAL.
>>>>> MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61 * MESSAGE A263.
62 ENDIF.
plz tell me the configuration steps for post goods issue in SD if applicable.Hi Lakshmipati,
I have maintained movement type 601 at OMJJ. I hav also added the filed cost center in that (before it was not available).
I checked GL acct at fs00, it is already contain field status group g004 and the check box "post automaticallyt" is also activated. The cost element has also assigned to cost center. After assigning the cost center to cost element, the error is changed to fld selection for mvmt type 601/ acct 300021 differs for cost center
But i noticed one thing: If i chage the field status group to g006, the error has not appeared and giving the other error:
valuation area xxx2 (plant) not yet ptoductive with material ledger this error has been already posted by me but not yet received correct answer.
Kindly provide the solution for this.
Regads
Sabera -
Problem with post goods issue in SD std. delivery
hi
while doing post goods issue of a delivery in VL01n its showing run time error. the error message is gvn below.
Information on where terminated
Termination occurred in the ABAP program "SAPLMBWL" - in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPMV50A ".
In the source code you have the termination point in line 59
of the (Include) program "LMBWLU21".
Source Code Extract
Line SourceCde
29 * when a goods movement for an inbound or outbound delivery is posted
30 * directly from VL31N/ VL01N, XBLNR is not yet known when we call
31 * CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32 * BKPF as well. There is no other way to forward XBLNR to FI as not
33 * every document is posted by MB_CREATE -> a new function module in
34 * MBWL for transferring the information, called by FI, meant to load
35 * the complete function group for all MBxx postings when this isn't
36 * required (Performance). Would be the better way to transport the
37 * information after switching off MBxx in later release.
38 * corresponding IMPORT ... FROM MEMORY ... can be found in
39 * AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40 l_mem_id = 'MKPF-XBLNR'. " 641365
41 EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42 ENDIF.
43 IF xmkpf-xabln IS INITIAL. "note 434093
44 CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
45 ENDIF. "note 434093
46
47 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50 CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51 EXCEPTIONS
52 error_message = 4.
53 * As soon as we have started to put things into UPDATE TASK, we must
54 * ensure that errors definitely terminate the transaction.
55 * MESSAGE A is not sufficient because it can be catched from
56 * external callers which COMMIT WORK afterwards, resulting in
57 * incomplete updates. Read note 385830 for the full story.
58 IF NOT sy-subrc IS INITIAL.
>>>>> MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61 * MESSAGE A263.
62 ENDIF.
if there is any configuration step for post goods issue in SD thn plz mention it.
Plz help..Hi Lakshmipati,
I have maintained movement type 601 at OMJJ. I hav also added the filed cost center in that (before it was not available).
I checked GL acct at fs00, it is already contain field status group g004 and the check box "post automaticallyt" is also activated. The cost element has also assigned to cost center. After assigning the cost center to cost element, the error is changed to fld selection for mvmt type 601/ acct 300021 differs for cost center
But i noticed one thing: If i chage the field status group to g006, the error has not appeared and giving the other error:
valuation area xxx2 (plant) not yet ptoductive with material ledger this error has been already posted by me but not yet received correct answer.
Kindly provide the solution for this.
Regads
Sabera -
Exception in CRM system after creating post goods issue in ECC
Hi Folks,
We are facing an issue in CRM system. I will tell the scenario in details so that it would be helpful to understand,
We are creating sales order in CRM system and it got replicated to ECC correctly. We have maintained action definition to trigger email to the customer.
Then we will be creating delivery and then post goods issue(PGI) for items replicated to ECC systems. After PGI system will update the status in CRM sales order and here configured an action definition to trigger an email to customer.
We have created custom badi implementations for action definition execute badi to send email. Emails are triggering correctly but after PGI creation while replicating the changes from ECC to CRM we are getting an exception in standard code because PPFTTRIGG table does not have entry. We have failed entry in CRM inbound queue and then did some debug and come to know the place of issue. Help me out with some inputs here.
Best Regards,
Dharmakasi.Hi,
I have identified one thing here, if the action definition does not have start condition system is not updating that entry in PPFTTRIGG table. Here i got 2 questions my mind
1. Why system is not updating the table with all the action definitions available in action profile
2. Why system is looking for the entry which was not updated in PPFTTRIGG table?
I do not understand problem with updating table or with action profile itself. Please give some input here. If we deactivate all the definitions which does not have start condition then there is no error.
Best Regards,
Dharmakasi. -
Profit Centre Document issue at the time of Post Goods Issue on SD.
Dear Experts,
While SD person is posting Post Goods Issue, System is generating Profit Centre Document along with other documents. We are facing an issue with Profit Centre document here and the issue is:
Some Profit Centre Documents are populating Delivery Order Number on respective field while some are not. Ideally all profit centre line items should show Delivery Order Numbers.
Please guide any solution to resolve this issue, its urgent.
Thanks in Advance.
Regards,
Zain BashirHi Zain
This is a tricky issue
Are you saying that the PCA document has the Delivery Number (VL01N) updated in some cases and not updated in some cases?
The Delivery Number is updated in PCA document when you create Delivery from VL01N and do PGI from VL02N
But, if you do PGI from VL01N itself, then the delivery number is not updated in the PCA document
SAP recommends to post PGI from VL02N
Br. Ajay M -
Error message while posting goods issue.
Hi,
Please help me with the following problem..
I have created Sales Order, Delivery & also created the Transfer Order number. After creating Transfer ordering, while submitting post goods issue, when I click on PGI, I get
"Posting only available for period 2002/10 to 2002/11"...
As a resulf of the above, I am not able to complete Billing for all the sales orders I have created.
Can somebody please help me with above?
Regards
NadeemUse the MMPV transaction to check your current period. Since you have transactions already done you need to do closing for every month.
If you are on an IDES system for training purposes you can do a fast transaction by removing the plant assignment from the company code. The use the MMPI transaction to set your current period. Remmber April is period 1 if you are are using the indian financial year and fiscal year variant k4.
Then reassign the plant and now try posting It will allow you. But a word of caution. Never attempt to remove the plant asignment in the development system. It might cause errors. for that there is a separate note.
regards
Jude -
Idoc to post goods issue against an outbound delivery
We happened to simulate both the idocs 'WPUWBW01' and 'MBGMCR02' for posting goods issue for an outbound delivery but failed.
Request you people to help us on this. Is there another idoc that we have to use to post GI... if so please let us know... and if we are using the right one, guess we are not executing it in the right way... in such a case please guide us with the steps...
Thanks
Arun
We got hold of the Idoc type 'DELVRY03 PGI SHPCON' we are able to post the Idoc but we are able to do the packing only or we are able to change the deliveries but the PGI is not happening..
please help us on this.. is there some condig that updates the delivery with the PGi or is there something else do be done in the Idoc....
will provide additional details if required.
ThanksHi Arun,
There are no configuration settings in this. It is development that your abaper need to carry out.
Explain to him that this is the func module. And intrun it has to either trigger a BDC or BAPI for creating packing and PGI.
He should then do the recording of that and will assign the program pertaining to BDC with in the function module.
One more suggestion is to put the same query in ABAP section too. U will definitely get a positive response.
Hope this helps.
Kind Regards
Chakradhar -
Need User Exits for Creation of Delivery and for Posting Goods Issue
Hi,
I need User Exits for
Creation of Delivery
Posting Goods Issue
I need to make some checks regarding customer license expiration and if checks fail, I need to stop Creation of Delivery and Posting Goods Issue.
Thanks in advance,
Will reward,
MindaugasIn the delivery you can use userexit USEREXIT_SAVE_DOCUMENT_PREPARE to make your checks and send an error message to the user in case they fail.
You can find this user exit (form routine) in include MV50AFZ1.
Hope that helps,
Michael -
Inter Company -Error in Post Goods Issue
Dear Experts,
I have developed new intercompany process between selling company & supplying company to customer. I have created sales order and delivery order. After delivery, am able to to PGI. If i check the Post goods issue document number accounting documents, supposed to take 0020 (selling company code) but its taking some different company conde. we never user that company code for intercompany scenarion. Vould you please tell me...why its taking different company code and how its taking wat we have to do. pls suggest me. and let me know what are the steps involved during PGI (bcoz PGI accounting entries are automatic)
Thanks & RegardsDear Murali,
I have checked as per ur suggestions, every things is correct but why it is asking different company code. Actualy our intercompany process between 0010 to 0020. 0010 is the supplying company and 0020 is the selling company. i have assigned 0020 s.org to 0020....config side everything is ok ...i never maintain 0315...but when am doing PGI its getting error
No accts maintained for company code clearing between comp.cds 0010 and 0315.
Menas here for acoount clearing between 2 company codes its taking another company code istead of 0020. If its take 0020 i wont get help bcoz we maintained account clearing between 2 company codes.
Please suggest me
Thanks & regards
VS -
POST GOODS ISSUE in Delivery Order
Dear Friends:
After going to Delivery Order,Vl02n, I clicked on Post Goods Issue and I am getting this error.
Delivery has not yet been completely processed by WM.
Delivery has not yet been put away / picked (completely)
How to Overcome this problem?
All the help will be greatly apprecaited.
ThanksHi,
What it is telling you is:
Delivery Note first need to be picked. If the storage location used in DN# is of WM managed, (you may verify this in the picking tab of the delivery itself.)....It would show WM relevant and not yet picked as statuses in this tab.
You need to create Transfer Order (TO) pick list for this delivery.
Do it from LT03.
Enter the warehouse number that you would see for this delivery in its picking details in the item.
Enter delivery note.
Hit enter and if everything works fine for you and if you are familiar with WM TO creation, you will be able to create TO and if not setup for auto confirmation, you can do it from LT12.
Once you do these steps, you can do the PGI.
Regards
Maybe you are looking for
-
How to avoid the null values from xml publisher.
I am creating a report which have the claim numbers with the values CLA001,CLA111,null, null . when i preview my report it is showing some spaces for null values also. How can i avoid the spaces from the report. I am giving for loop for the claim num
-
Laserjet M1522nf driver for Windows 7 64-bit operating system
My operating system recognizes the printer on the network for printing, but not for scanning or faxing. I would like to install the correct driver, but there are five (5) different drivers listed without any explanation of the difference between the
-
[JS, CS3] Creating a new boolean object. Is it possible?
Hello, I am wondering if I can create a new boolean object in InDesign that I can use in a script I am working on. What I am doing is selecting some text and then manipulating other aspects of the selection's paragraph. I want to be able to determine
-
Where is the NVRotate Feature???
Can someone please help me. MSI Support keeps telling me that the NVrotate feature is supported under Win98SE, and it is a feature that is clearly available display properties-->settings -->GeForce FX5200 Here are two pictures. The first clearly show
-
Why do i always have to sign into apple support communities
cant it just keep me signed in all the time? i have the username password stored, but everytime i visit i still have to sign in by clicking.