Post graduation after SAP

Hi,
I am currently working as a PI consultant after BE-computer science and Certification in ABAP(Siemens).
With 2 years of SAP experience, what post graduation programme are available so that I can continue working in SAP.
Kindly suggest.
Regards,
Pratibha.

Hi Pratibha,
Some of my frnds got a good salary hike, some got promotion , also I was able to change a company .... Further study part time will be an added qualification.
It was a recession time, so getting any clue is difficult but this sorts of courses are sometimes sponsored by Big companies also, so this has some value, truly. Another thing is that, it gives me further knowledge of understanding other business domain which i was not too comfortable earlier.
Today you are in technical, tomorrow you may not be, Instead of looking into today, you may think of 5 years down the line, surely you will be a lead by that time.
It depends on your career outlook, Please take informed decision.
Rgds;
Koushik

Similar Messages

When do we post Deposit in SAP B1?

Hi,
I have a doubt related to posting Deposit after posting Incoming Payment.
When can we post Deposit in SAP after raising Incoming Payment.
Is it when the cheque is deposited into the bank for clearance.
OR
When the cheque is cleared into the account, then we post deposit in SAP B1.

Hi.......
You should deposit the cheque in to Bank account when it actually goes to get deposited.
Else if you not do this and if your cheque is bounced then how you track this against which deposit your cheque is bounced.....
So Ideally when your cheque is deposited it should be done in SAP.......
Regards,
Rahul

Where do i find daily posted question on sap abap and sap webdynpro abap

Hi
where do we find Daily posted questions on sap abap and sap webdynpro abap in scn sap so that i can go through the questions and answer them .

Hi,
Go to the Content tab of any space and click on discussions. Then you can sort them by date created or any other
For ex: This link for WDA discussions: - Web Dynpro ABAP
You can also click on Receive email notifications for any space to get updates on that space.
hope this helps,
Regards,
Kiran

TS1702 NY post AP, after update, crashes upon launch. Tried all re-starts & re-installs, to no avail. Any ideas?

NY post AP, after update, crashes upon launch. Tried all re-starts & re-installs, to no avail. Any ideas, or is it just my punishment for reading it at all?

The quote below is from a previous thread where several people solved your same problem with the stated technique. Maybe it will work for you. Good Luck.
iTunes 7.0.2 FIX ("Have tried all 'fixes' suggested but iTunes STILL not opening").
1. Uninstall iTunes and QuickTime.
2. Do a search in the C:\ drive for "QuickTime". Delete EVERYTHING that pops up.
3. Restart the computer.
4. Install QUICKTIME ONLY
5. THEN install iTunes......and IT WORKS.....Just remember to install QuickTime FIRST.

Posting entries in SAP based on based on Transactions in 3rd Party App

Hi All,
One of our customers is in the service business i.e. they provide repairing services for parts. For them we have to develop an add-on(UDO) to capture information of the parts alongwith the progress of the part through various stages. The customer also uses a 3rd party application for details of the repair work done on each part.
For this scenario, there is a requirement of the 3rd party application getting info from SAP about the parts to be repaired. In this application, details such as BOM, quantity of inventory (i.e. of components inside the part) are required. The components consumption happens in this application which needs to update the relevant stock levels in real-time in SAP. Also, once the repair process is over, the application needs to pass information to the SAP add-on for further processing such as packing and dispatch.
The 3rd-party application has more than 200 users. For this to be successfully interfaced with SAP, we have thought of a central server component i.e. a windows application that will interface between the legacy application & SAP
For this scenario, we have few queries and would appreciate your assistance on the following:
1. Since there are multiple things that are done in the 3rd party application, how can we have the Windows application listen to all the events (RFC or legacy application database update events).
2. If the windows application needs to listen to the legacy application database, how can it listen to multiple tables/events at the same time as different user will be performing different actions at the same time in the legacy application.
3. Even if we create multiple applications to listen to the database updates, what will be the license requirement to post relevant entries in SAP (DI API connections will be required for: 1. Posting Goods Issue & Receipt in SAP 2. Update UDOsx2)
4. Performance issues due to 3 listeners and posting entries in SAP (approx 2000 entries/day)
5. If the listener concept wont work then in case of RFC, there will be 200 DI connections required to SAP - does that translate to 200 SAP licenses?
An alternate to this solution is we register the tables of the 3rd party application as a UDO as well in SAP. What will be license requirements for this? 200 licenses?
With this approach, we can use the SBO Transaction notification stored procedure in the Windows application to trigger relevant updates in SAP - does this sound like a better solution?
We are in a fix now and need more feedback to take this further.We request your expert advice on this matter to clarify the ambiguity at the earliest.
Thanks & Regards,
Gyanesh Rupani

Dear All,
Any view on how this can be achieved?
Regards,
Gyanesh

After SAP GUI 7.10 installation IE7 does not work properly

Hello,
After SAP GUI 7.10 installation over WIn Server 2003 Ent. + SP2. When I try to open new link or window with right click in IE7 this process starts but cannot display anything in new window. At the same time link is correct. Could you please help me?!

Hi
Please see n try the following notes
856741 - Link in HTMLViewer displays 'HTTP 500 Internal Server Error'
738927 - HTMLViewer: moniker protocol is disabled in WinXP SP2
If not able to solve, then please install the latest version of SAPGui 7.10 patch 8.

Standard BAPI to post payment in SAP-ISU

Hi Experts,
My client's requirement is the payment via third party should be posted synchronously in SAP-ISU system means payment is accepted by third party and we just need to update that payment in SAP-ISU system. We are trying to achieve this by RFC.
I came across BAPI_CTRACCTRCTACCNT_PAYBYCARD which post the payment in the system but it need credit card detail. I want to post the payment from third party which can be cash/cheque. I just wanted to know if there is any standard BAPI which can be used to post payment in SAP-ISU system?
Thanks in Advance,
Mansoob
Edited by: Mansoobkhan on Oct 21, 2010 4:08 PM

Hi you can try with the following BAPI'S
BAPI_CTRACPAYMINC_CREATE
BAPI_CTRACPAYMINC_APPEND
BAPI_CTRACPAYMINC_RELEASE
BAPI_CTRACPAYMINC_CLOSE
If you have PI available you should check out the external cash desk functionality.
Best regards.
Cristóbal.

Post Installation for SAP PI 7.0

I have done installation and post installation for SAP XI 3.0. Now I am trying to do the same with SAP PI 7.0. I am done with the installation. Presently working on Postinstallation. I believe this is not similar to SAP XI 3.0 ? Please let me know what are the difference in the Postinstallation between these two and also any links or documents for SAP PI 7.0 will be appreciated. Thank you.

Hello Akella,
You can view the Post Installation steps involved in PI 7.0 in the template installer under
http://servername:50xx0/nwa
Also refer this
PI(XI 7.0) configuration guides
Regarding SAP PI 7.0 Configuration
Just Installed PI
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
regards,
Anandh

How to search my own posts/threads in "SAP Community Network Forums"?

Dear Friends,
How to search my own posts/threads in "SAP Community Network Forums"?

Dear Pierre DOMINIQUE,
Thanks for your information, but I know It very well. Lets say I have around 200 posts in the forum, some are unsolved and rest are solved. Now I want to find a old solved/answered post/thread by a key-word, how to do it? ... Actually I asked for this.
Thanks in advance for your right answers.

Best Practice on Post Steps after 11.2.0.2.4 ORACLE RAC installation

I finished RAC 11.2.0.2 installation and patched it to 11.2.0.2.4. The database is also created.
The nodes are Linux redhat and storages are on ASM.
Is there any good article or link regarding the best practice of post steps after installation?
Thanks in advance.

Hi,
I also want to know what kind of monitoring scripts I can use to setup as cron jobs to monitor or detect any failure or problems?
To monitor Cluster (OS Level):
I suggest you use a powerful tool "CHM" that already comes with product Grid Infrastructure.
What do you do to configure? Nothing ... Just use.
Cluster Health Monitor (CHM) FAQ [ID 1328466.1]
See this example:
http://levipereira.wordpress.com/2011/07/19/monitoring-the-cluster-in-real-time-with-chm-cluster-health-monitor/
To monitor Database:
PERFORMANCE TUNING USING ADVISORS AND MANAGEABILITY FEATURES: AWR, ASH, and ADDM and Sql Tuning Advisor. [ID 276103.1]
The purpose of this article is to illustrate how to use the new 10g manageability features to diagnose
and resolve performance problems in the Oracle Database.
Oracle10g has powerful tools to help the DBA identify and resolve performance issues
without the hassle of analyzing complex statistical data and extensive reports.
Hope this help,
Levi Pereira
Edited by: Levi Pereira on Nov 3, 2011 11:40 PM

Probleme to run server after SAP NetWeaver 7.01 ABAP Trial Version install

Hi all,
I have a probleme to start WAS and MAxDB after SAP NetWeaver 7.01 ABAP Trial Version.
I installed the all and then connect to SAP System without restarting Windows. There was no probleme there all was perfect and I can connect to SAP.
Next, I restart Windows,open SAPManagementConsole, the use the "Start" function on "NSP" icon and system telle me that I haven't the right credentials ... unbelivaible because it told me to use my OS user account and password I used the same user/password than the previous one, when it worked.
So I tried everything that come to my mind but I didn't found the solution.
I also tried to use sapstartsrv.exe under C:\SAP\NSP\SYS\exe\run folder the only thing is that the Windows service "SAPNSP_00" command line was changed but I don't thing that it is with the good parameters.
So, I really don't know how to start this system and I would be pleased if you can help me !
Tanks a lot
Regards
morgan

Hello,
Normally there should be a possibility to start this via
Start -> All programs -> SAP NetWeaver 7.01 ABAP Trial Version -> Start application server
or via C:\MiniSAP\NSP\SYS\exe\run\startSystem.cmd
Regards,
Michel

How to read Attachments in Adobe forms and post it to SAP

Hi,
We have developed a form to Create a Purchase Requisition.
My requirement is to attach a couple of documents and post it to SAP when creating a Purchase Requisition.
How can check whether the user has attached the documents or not using Javascript.
Also how to read the attached documents using JavaScript and post it to SAP system.
Thanks,
Taha

It is an offline form.
We are consuming the web service in Form to create a PR.
However we also need the user to attach some documents before it actually clicks on the "Create PR" button.
User can attach the file through "Attachments" facility provided on Adobe Reader.
Our problem is how to check whether user has attached the documents or not. If the documents are attcahed then how to read them using JavaScript?
Thanks,
Taha

Steps after SAP Installation

Hi Gurus,
Do you have a document which would list down the steps to be performed after SAP is installed before we start migrating the legacy data.
thanks

Hi Gurus,
Do you have a document which would list down the steps to be performed after SAP is installed before we start migrating the legacy data.
thanks

Addition to post "import after crashing"

sorry i left this out.... see post import after crashing... i also keep getting the message to rebuild thumbnail cache which i do as soon as i get it. i got it today and about 4 days ago.
does this have something to do with it crashing? i was told that 8,000 photos isn't too much for iphoto. is this correct?
thanks again,
movie lady

I have replied to your original topic.

Which is the Latest version to be released after SAP MDM 7.1 version ?

Can any body give me the details about the latest version to be released after SAP MDM 7.1?
Thanks & Regards,
Krishna ..

Hi Krishna,
as far as i know MDM 7.1 general versions for user is still about to come.
but With SAP NetWeaver Master Data Management 7.1, SAP has enhanced the MDM technology foundation to build pre-packaged business scenarios and integration. This SAP NetWeaver MDM release has been in ramp-up shipment since the end of November 2008.
But for 7.1 some highlights are
Extended flexibility for data modeling and support for complex objects
Higher performance and improved inbound and outbound processing e.g. through native MDM adapter for SAP NetWeaver Process Integration
Enhanced integration into SAP NetWeaver standard administration and life-cycle components
after successful Operation with this I guess new release will mess up.
Hope it helps.
Rgds
Deepak

Post graduation after SAP

Similar Messages

Maybe you are looking for