Post  handling unit like cowbhuwe transaction

Hi,
I have to use function module to post  handling unit like cowbhuwe transaction for my interface,I found 1 FM VHURM_HU_POST_WE_PROD_ORDER(which is using by cowbhuwe Transaction),But I can't use it in my interface because any time it fails it is generating screen error which gives problem for interface when run in background or through XI,Is there any other FM which will do the same work and if any error occurs it return value in internal table not in screen error

hey,
Did u get any solution for this ??
We have a similar requirement and are unable to find any FM which is useful for this....

Similar Messages

  • External Number Range for Handling Unit in COWBPACK Transaction

    Dear All,
    I need to activate external number range for handling units in COWBPACK transaction.
    i have tested but its not possible in standard SAP.
    i want to know any USEREXIT or BADI or BAPI for the same, so that we can use external number range for HU in COWBPACK.
    with regards
    Azeez.Mohd

    Hi,
         Thry this BADI
    BADI_HU_MAIN
    BADI_HU_SAVE
    Regards
    GK.

  • Post Handling Unit Physical Inventory Document

    Hi Experts,
    Is there a BAPI or a FM to post/clear the physical inventory document created for a handling unit? The manual transaction used in this is 'HUINV05'.
    If there is no BAPI or FM, kindly help in finding a way how to capture in recording the commands executed in an ALV.
    Points will be rewarded.
    Thanks...

    HI
    In the transaction OB52 please change for all account types, since you have changed only for type S which is general, please do change for the rest of the account types like M for material, k for vendor, D for customer as well.
    Hope this helps.
    Regards
    Vignesh

  • Handling Unit Management

    Dear Gurus,
    In My Business Scenario,I made Handling Units For My Workorder(Process Order),in Transaction COWBPACK and Received Those Handling Units through COWBHUWE transaction.The Stock is Posted to Quality Stock.During Usuage Decision ,in the Stock Posting Tab Page ,I have Accepeted the Lot and Posted to my New Material ID,as the MIC Results Suits Closely to New Material ID.Now I do not Found any Handling Units Present For My New Material ID.Only the stock Exists For the New Material ID.
    No HU to HU Transfer Taken Place.
    Now my Quastion is How to Create HU'S For the New Material ID.The Process order Status Was DLV.Pl Guide.
    Note: Our Storage Locations  are not HU Managed Storage Locations
    Regards,
    PSV

    DEAR GURUS,
    PL PROVIDE SOLUTION.
    REGARDS,
    PSV

  • Handling Unit posting GR via IDOC

    Hi,
    I'm searching for an IDOC to post a goods receipt for a production order with Handling Units, like transaction COWBHUWE.
    It seem that the MBGMCR will not work with Handling Unit data.
    Best regards to all

    Hi,
    thank you for your help, but it is not and decentralized scenario, no "In- or Outbound Delivery Confirm Decentral" or "...Save Replicas...". It is a goods receipt for an integrated storage location.
    Best regards

  • Assign handling unit

    Hello,
    I looking for a bapi to assign open reservation of a process order to handling unit (like tansaction copawa).
    Thanks.

    Hello Naama
    Did you check Transaction BAPI, there you can find a complete documentation about all the available BAPIs.
    Gabriel

  • Extrernal Number Ranges for Handling Units in COWBPACK

    Dear Friends,
    I need to activate external number range for handling units in COWBPACK transaction.
    When I run COWBPACK, I don't get any field to enter Handling Unit Number.
    Can anybody suggest the way out.
    Regards,
    Harsh

    OK

  • Information about outbound delivery and its handling units

    Hi All experts,
    I am working on a requirement where I have to display information about the following :
    1. Outbound delivery number.
    2. related Handling units( 1 or 2 ) indentification number.
    3. Transport number.
    4. Shipping to party.
    5. Line items of handling units like material inside the handling unit.
    6. Material quantity.
    In the selection criteria user is given the choice of entering
    1.Outbound delivery number.
    2.Transport number.
    3. Handling unit identification 1 or 2
    4. Shipping to party
    Based on this information on selection screen ouput needs to come out.
    Could you people let me know about the tables and function modules which gives the informaiton back based on these details.
    Thanks,
    Mark

    Hi Mark,
    try out with IDOC_OUTPUT_DELVRY this Function Module.
    Reward points if it is useful.
    Regards,
    Prasad

  • Batch number is blank and not editable during packing into Handling Unit

    Hi, we have an issue that the batch number (VEPO-CHARG) for delivery line item is not showing up and not editable during packing into Handling Unit through shipment transaction VT01N.
    When we have a batch split for one delivery line item, we want to be able to choose which batch to be packed into each handling unit.
    Does anybody know any userexit to populate that field or at least make it editable? Is there something in the configuration that make it not show up?
    We tried all the SAP suggested userexit for VT01N but nothing seem to control the handling unit packing screen.
    Any hint is appreciated and point will be rewarded.
    Minami

    you should take the ovn on the effective date. A max will not always work.
    Is the max also not hiding a no data found?

  • Packing and handling units

    Hi,
       Please help me solve this problem.
    At the truck station, when we are packing a shipment with more then 60 boxes,
    the system will stall and we are forced to log off and log back on to finish the job i.e
    packing boxes.
    The solution i want is:
    We need to ensure that we can pack more then 60 handling units in one transaction session
    Please respond immediately it will be helpful to me.

    Hi Friends
    I created Handling Units with BAPI_HU_CREATE , Pack materials with BAPI_HU_PACK in to Handling Untis and assign handling units to sales order with BAPI_HU_CHANGE_HEADER . But These BAPIs are not doing packing sales order line items in to handling units . I have to go sales order and do sales order line item packing by clicking packing button.
    Could you please help on how to do packing Sales Order Line items in the background with BAPIs.
    Thanks in Advance.
    SR

  • Assigning Serial no to Handling unit

    Dear All ,
    I am having problem in creating serial no for the handling unit which i have created in the transaction code HU02. I am only able to create serial no for the items within the handling unit but is unable to create a serial no for the handling unit.
    Please anyone tell me is there any way to create serial no for Handling Unit by this transaction code or any other transaction code.
    Help me in resolving this matter , i need to resolve this problem urgently.
    Thanks

    Hi,
    You cannot create serial number for handling unit.
    Serial number can be created for the item of handling unit.
    http://help.sap.com/saphelp_47x200/helpdata/en/2d/584bcea70f11d2b44e006094b9b9dd/content.htm
    Regards,
    Vishal

  • Goods Receipt with respect to Handling Unit (Transaction u0096 MIGO)

    Hi All,
    A delivery is created for stock transport order for goods movement from Plant XXXX (Storage Location – YYYY) to Plant XXXX (Storage Location – ZZZZ).
    Handling Units are packed on delivery and delivery is post goods issued from Plant XXXX (Storage Location – ZZZZ).
    While posting goods receipt (Transaction – MIGO) without selecting “Via Handling Units” system populates the “packaging material” line item whereas when “Via Handling Units” is selected (in other words – when tried to post Goods Receipt with respect to Handling Units) system doesn’t populate the associated “packaging material”.
    Requirement is to populate “packaging material” line item while posting Goods Receipt with respect to Handling Unit.
    Plz guide me.
    Satish

    Hi Vatcan,
    Chek the Inbound Delivery 1st weather you refer the right PO in it
    You can also chek in  PO i
    1 Me23n Go to confirmation tab here you can see the  Inbound delivery  quantity
    2 Chek  which reference document you recived the goods,  (i.e You recived the goods with reference to PO or  Inbound delivery)
    2 Coz if you refer the inbound delivery then syestem will deafult show the inbound quanity
    And yes the actual quanity will update in inbound delivery if you refer the inbound deivery while reciveing the goods

  • Post initial Stock of Handling Units

    Hi,
    How i could post initial stock to Handling units in storage location that isn't HU Manager.
    I tried 561 and 501 in Vlmove and Humo  but didn't work,
    In vlmove i have this Error "Dlv. type (dlv. catgry TP for mat. xxxxxx and BWART 561 ) cannot be determined".
    In Humo 561 doesn't appear, but is in omjj.
    thanks in advance.
    Mary

    Hi,
    My HU is a fixed container like a tank, i need put stock inside this HU, directly from other system.
    thanks
    Mary

  • Program code and transaction code  for handling unit detail

    Developed a SAP Script for the Handling unit details. Handling unit details is a document which has the details of materials, packaging materials and the level of packing. This Handling Units details will be issued to the customer at the time of delivery.

    Hi,
    Goto NACE transaction code , there you select the application area then  it will give you the list  of output types then select specific output click processing routines then you will see the program name and  script used.
    Or esle goto SPRO tcode then you can find the functional tab there also you can get the details.
    Thanks,
    Aditya

  • QA32 UD for Handling Units results in a transfer posting delivery?

    In our environment we have Handling Units,  Serial Numbers and QM.  In the mateial master the QM inspection types are set to inspecting by HU.  The inspection lot gets created correctly and it references all the HUs.  When we perform a usage decision and transfer the HUs to unrestricted stock in QA32.  The system creates a transfer posting delivery that I then have to go and pick the HUs onto and then PGR the transfer posting delivery.   It seems to me that because QA32 is working with the HUs it should direclty post the stock to unrestricted.  I don't understand why I need this Transfer Posting Delivery.
    Can anyone confirm that, yes indeed this is standard SAP behavior and we have to live with it  or Am I missing something and no the system can directly post an HU with serial numbers form 'Q' stock to unrestricted via QA32.
    Thanks for your help,
    Steve

    Hi,
    The Standard SAP process is as follows,
    1. GR --> Inbound Delivery created and stock is in 902Q
    2. QM processes
    3. Take Usgae Decision --> Transfer Posting Delivery Created
    4. Create TO and confirm TO with reference to step 3 Delviery (Sotck moved from 902Q to 922Q then 922 without Q to 902 without Q(Unrestrcited use)) (This TO Creation and confirmation can be automated)
    5. Now create TO and confirm TO with reference to Step 1 Delivery (Stock moved from 902 without Q (unrestriced)) to the permanent storage (unrestricted use stock).
    I hope this will help you.
    Regards,
    K.Annadurai.

Maybe you are looking for

  • Problems Syncing Photos

    My iPod Touch 3G has been working perfectly until recently. I manage my photos using Adobe PSE 6.0 and I have selected 3 albums to sync with my iPod. I have created a new album in Photoshop Elements and made some additions and deletions to pictures i

  • How to modify content in a rejected item

    Hello all, We created two users, user1 (contributor) and user2(approver). We have a page were user1 can access with permissions (manage with approval), and in the approval tab we inserted the user2 as lonely approver for this page. So user1 added an

  • IDOC structure for HRMD_A07

    Dear All, We want to create IDOC HRMD_A07 through SAP PI in ECC to create employee. Please guide how we can get the output structure like e1plogi e1pityp e1p0000 e1pityp e1p0001 e1pityp e1p0002 Whereas the standard IDOC structure is like as follows:

  • How can i get the begin date and end date of some week in some year

    I only know the week number within the current year.

  • Generic program for calculating subtotals

    Dear All, I have created a big sales ALV report for the company which collects the data from lot of tables. Now the problem is, the report that I have created is Invoice-wise item-wise report. And every user and management do not want that item-wise