Post here if you are running 2xWD Raptors in RAID on the ICH5R (865PE)
Just as the title says. I have yet to see anybody get 2 raptors in raid configuration to work properly (including myself) on the 865PE Neo2-FIS2R's onboard Intel RAID controller (NOT THE PROMISE CONTROLLER - we all know this one works already).
If you don't have this combination set up please do not reply or tell me that you are running other brands such as Maxtor or Seagate with no problems. This thread is here to see if anybody is using the Raptors specifically.
There has got to be someone out there running raid with these drives on the ICH5R... if not then that means there's something wrong with these boards and they deserve a recall.
I'm not only running two WD raptors... I'm running FOUR!
2 in a stripe with promise, which is my bootable, and 2 as stripe using the intel raid.
So xp has two hd's, both 70+ gigs.
That much SEEMS to work ok.
However... and this is where I start to cry...
875P Neo FISR version
I have a p4 2.6c 800 fsb proc.
I have 1.5 gigs of 2700 ram @ 266.
gf4 ti 4200 128 meg gainward golden sample
4 friggin WD Raptors
Audigy 2
Smokin system. In theory.
The problem is, ever since i flashed to 1.9, the system runs like cripe.
prior to 1.9 i had 1.4. Computer booted in 45 seconds flat (one raptor). Now with 1.9, it takes about 2 1/2 minutes (four raptors, 2 raids). It seems to hang between the POST and the Win XP logo. Just a blank screen for about a minute. *sigh*
Not only that, but 3dmark2001 se is scoring me at 6300. I should be well over 10,000, as I was with just ONE wd raptor.
Now I cant even roll back the BIOS. I create a startup disk for xp, and it keeps telling me Disk I/O error, and I've tried several floppies.
My p4 2.0 with 512 ram loads everything faster than this machine.
help. has flashing to 1.9 borked my system all to hell? As I cannot boot into DOS, I cannot roll the bios back.
Thanks!
Jim
Similar Messages
-
You are running an operating system that Illustrator no longer supports.
I cant download Illustrator Creative Cloud, I get the following message:
You are running an operating system that Illustrator no longer supports. Refer to the system requirements below for a full list of supported platforms.
Im running OS X 10.6.8, Intel Core 2 Duo, 4GB RAM. This all seems fine with the system requirements for Illustrator CC. Why can't I download?kitkat,
Have you followed all the crucial instructions 1) - 6), as follows (copied from my post in the other threead)?
Note: Very Important Instructions
You need to have a free Adobe account and be logged into it to use the links below, as Adobe sets a session cookie on your browser that allows you to access the direct download links. Otherwise, you will receive an “access denied” or “resume your download” message preventing the connection. So please follow these instructions carefully or the links will not work!
Adobe recommends temporarily turning off any surfing restrictions you might have running, like site or cookie blocking, filtering, firewalls or antivirus software.
Click «HERE» to visit this page and then select the “Download Now” button at the bottom.
If asked, then sign in with your Adobe ID or take a minute to create one for yourself.
Now close or cancel any windows that may pop up or any downloads that started.
OK! Now you’re logged in at Adobe with the trials cookie set, so you can instantly download any of the software below. Just make sure you have enough disk space.
Download the files either by clicking directly on the DDL links, or by right-clicking and choosing “Save Link As…” on the popup menu – and save all files to the same place.
Then follow the product installation instructions here. -
What to do with message: You are running an unsupported version of Microsoft Windows.(Windows8.1)
I got this message when I run the program DETEKT. You are running an unsupported version of Microsoft Windows.
On my new Asus N550JV with pre-installed Windos8, I have many times a fall-out of the Network connection with WIFI since I used Windows 8 and after upgrade to Windos 8.1 Did not solve this problem.
What to do now??Hi,
Based on the description, you get message "You are running an unsupported version of Microsoft Windows.(Windows8.1)" when you use the DETEKT tool to detect Windows Server version.
For this issue, I recommend you ask in the Windows forum which is staffed by more experts specializing in this kind of problems. You can get better help there.
If you have problems about Exchange server, please feel free to post here for analysis.
http://social.technet.microsoft.com/Forums/en-US/home?category=windowsserver
Thanks for understanding.
Best regards,
Belinda Ma
TechNet Community Support -
How to Check if you are running Lync Server Evaluation or Licensed Version
I was not sure if our Lync environment was running Evaluation Version of the Lync Front End server or the Volume Licensed Version. I was looking to migrate from PoC to production so I had to make sure that the services didn’t stop in the middle of production.
A simple cmdlet to verify this: Get-CsServerVersion
1. When run it will attempt to
2. Read the registry value HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Real-Time Communications\{A593FD00-64F1-4288-A6F4-E699ED9DCA35}\Type
3. Based on that registry value, the cmdlet will then report back the version number of the software and the Lync Server licensing information the local computer and report back one of the following:
o That the Lync Server volume license key has been installed on the computer, meaning that no updating is necessary.
o That the Lync Server evaluation license key has been installed, meaning that the computer must be updated.
o That no volume license key is required on the computer. Updating from the evaluation version to the licensed version is only required on Front End Servers, Directors, and Edge Servers.
What if Evaluation Version is installed and you have to upgrade to Licensed Version?
1. Log on to the computer as a local administrator
2. Click Start, click All Programs, click Microsoft Lync Server 2013, and then click Lync Server Management Shell.
3. In the Lync Server Management Shell, type the following command and then press ENTER:
o msiexec.exe /fvomus server.msi EVALTOFULL=1 /qb
o Note that you might need to specify the full path to the file server.msi. This file can be found in the Setup folder of the Lync Server Volume media installation files.
4. After Setup finishes running, type the following from the command prompt and then press ENTER:
o Enable-CsComputer
o Repeat this procedure on any other Front End Server, Director, or Edge Server running an evaluation copy of Lync Server
o This procedure should also be performed on any Branch Office Servers that were deployed by using the Lync Server media installation files
Using Get-CsServerVersion will also show you
1. What Version Number you are running
2. What patches has been installedHi,
I couldn't find direct way of saying whether node manager is running or not but here is the work around. Using WLST when you say "startNodeManager", if the node manager is running this command throw an output saying "node manager is already running". Let me know if this solution works for you, if it works then I can give you java program for this if required or you can use "WLST JAVA Mode".
Thanks.
Vijay Bheemineni. -
I keep getting the message "Safari browser version you are useing does not support community tool bar." Where is this coming from and how do I get rid of it ?
That toolbar/ct plugin causes problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery. -
You are running an operating system that Photoshop no longer supports.
I am finally upgrading from my Adobe CS6 to CC and paid for a Lightroom/Photoshop bundle. I am running the latest OS from Mac, Yosemite 10.10.1. But I receive the following error message when I try to download it:
You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms.Here is my system configuration. Can someone tell me how to download this app?
-
You are running an operating system that Dreamweaver no longer supports.
You are running an operating system that Dreamweaver no longer supports. so i cannot download a trial version i am operating vista windows, how can i get this trial version
thanksYou CAN find downloads of older trials here: http://prodesigntools.com/tag/ddl
You need to follow their instructions VERY CAREFULLY and completely, or the links don't work.
Of course, without a valid product key (which Adobe doesn't sell anymore, except for CS6 - maybe) you can only use them for 30 days. -
Hi what does this mean and what do I need to do?....You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms.
well not sure of what the problem is besides you running an operating system that adobe cannot work with. reply with that type info ie I am running windows xp home or OSX version 7.5.3 etc. Meanwhile here is the link for minimum system requirement for adobe's creative cloud products System requirements | Creative Cloud that should help. good day
-
Cannot download trial version. This always appears "You are running an operating system that After Effects no longer supports. Refer to the system requirements below for a full list of supported platforms." PLEASE HELP.
Hello,
in this case please have a look here where you can compare it with your equipment : System requirements | After Effects.
Good luck!
Hans-Günter -
Hi there
I got the following message when trying to install Photoshop CC, "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms."
I use Windows Vista so not sure what I need to do now! Any help would be much appreciated thanks.Photoshop CC only runs on Windows 7 or Windows 8/8.1. Not Vista.
System requirements | Photoshop -
I have tried many times to download creative cloud desktop app such as AI, LR, PS, ID and so on. the following message appears You are running an operating system that Illustrator no longer supports. Refer to the system requirements for a full list of supported platforms. The only one I have succeeded to download are DW and MU.
Please could you help outHello,
please have a look at the different sys-requirements for example:
AI: http://helpx.adobe.com/illustrator/system-requirements.html
PS: http://helpx.adobe.com/photoshop/system-requirements.html
(LR 1-5: http://helpx.adobe.com/de/lightroom/system-requirements.html)
You will find the same explanations for your other programs.
Hans-Günter -
Hi,
I've searched everywhere I can think of for a solution to this problem with no success. I see other people have reported similar issues and these have not yet been resolved.
I have installed Windows 7 32 bit on a new Mac Mini under Bootcamp. When I go to install the Bootcamp drivers in Windows, I get the message "the version of this file is not compatible with the version of windows you are running".
Other people have reported this issue when trying to install 3rd party software on a 64 bit version of windows but I'm simply trying to install the Bootcamp drivers on a 32 bit version of Windows.
Is it possible the Mac Mini needs a 64 bit version of Windows installed under Bootcamp? I haven't seen this requirement mentioned anywhere.
Appreciated all and any help that can be offered.Welcome to the Apple Support Communities
That's because the Late 2012 iMac and Mac mini only supports the 64-bit Windows 7 version, so the drivers you downloaded are designed to work with the 64-bit version and you can't install them on a 32-bit version. Install the 64-bit Windows 7 on your computer -
I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?
Hi Brizill,
Please refer to the help document below to understand the technical specifications for the same:
System requirements | Photoshop
Regards,
Sheena -
you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues that could prevent you from restoring. After restarting the computer and iOS device, attempt to restore again.
How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library. Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC. If iTunes still crashes, then if could be a number of other things, but probably not your library. My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes. If that doesn't work, then my next ideas you won't like. -
Hello - since configuring a Windows Web Server 2008 R2 x64 to be hardened for an internet-facing deployment I receive this:
"Device Manager is running in read-only mode because you are running it on a remote computer."
when entering Device Manager.
I have tried reversing the changes I have made, such as:
- Re-adding Client for Microsoft Networks
- Re-enabling NetBIOS over TCP-IP
- Re-adding File and Printer Sharing
- Disabling the Windows Firewall in all profiles (public, domain, private)
I get no joy. It looks like a Microsoft ballsup. I'll try and use Process Monitor to have a look. Google returns only 1 page for this error.
LukeGot it.
After my changes to DHCP and static IPs the machine picked up the IP address of another server on my little home LAN. The hostname in IPCONFIG was different to the actual server computer name and so this led Device Manager to think the connection and the
local machine were different.
What an odd and infuriating problem. My thoughts on this are that Microsoft should be more verbose with error messages and their causes. For example, displaying the values of the assertion would help diagnose a problem; "The host-name www02.farm.brand.com
that you are connecting from does not match the local host-name rest01.dev.farm.brand.com. Connections from remote computers can only use Device Manager in read-only mode; some options will be disabled."
When troubleshooting, the main thing on an engineer's mind is "what has led Windows to its [unexpected] conclusion?"
Luke
Maybe you are looking for
-
Problem with SUN cryptographic provider (PKCS#11) & EclipseRCP
Hi all, We developed a java program for using cryptographic tokens, for instance,smartcards. The crypto provider from SUN offers the API (PKCS#11) and all cryptographic functions to handle smartcards. The program works as standalone application, but
-
I am doing DAQ uaing AI S-scan.vi and wanted to know if I can take the output from it and make a power specturm. I know I can do it using AI Continuous input.vi, but the input from that is buffered so it comes out in chunks and so S-scan is preferabl
-
Bonjour everyone! This is a problem that i'm having major difficulty with, I've just imported about 30gb's worth of video (i know right?) and it's really bringing the amount of space I have on my HDD down, so I was wondering if there's a way to put a
-
I can't log into icloud from my Windows 8 PC, but I can from my Windows XP PC
I had my old Vista PC upgraded to Windows 8. I just tried to log into www.icloud.com, but after entering my username and my password nothing happens. No errors, nor messages. Fortunately, I can remotely log into my work PC which is a Windows XP.
-
Difference Tax and Pricing Procedures???
Hii experts some body can tel what is the difference between tax and pricing procedures? Pricing excise duties will not come or how the scenario..?? Some explain me without any ling here, it will be thankfull. Thanks SAP-MM