Post Here YouR (OC) Bios Stable Settings.

K, Since i wanna know how to get even higher clocks than my current oc @ 2552 see sig. I would like to know what your Stable settings in bios are.
Mine is now:
4xHt
232 HTT (233 causes no boot, looking for array but its disabled in bios, quite weird??!!)
Agp freq 67
Vcore volt 1.65
Mem Volt 2.60 (standard on my kingston hyperx pc3500)
DDR @ 333 (166)=> (193 Oce'd)
timings 2 3 7 3 1T
Agressive timings enabled
Spread spectrum disabled
CnQ diasabled ( have a bad 12v rail thats why its off, when on its causes boot up when cpu goes back to oc clock or standard clock )
Hope to see more of your settings.
Good Luck And Have Fun Overclocking this board.

First off, I'm glad you posted this (randomly did a search on google).
I'm a 'newbie' to building a computer, let alone overclocking, but I've decided to overclock anyway.
That being said...my first attempt at overclocking made me panic like no other. I set the HTT to 270... with 3x HT and voltage 1.60 and basically I had to reset the CMOS (I could turn on the computer but nothing would show up on screen). I've never reset the CMOS so it was at least 2 funfilled hours of nothing but distress.
Anyways...
I was able to overclock my 3500+ to 2467 MHZ =X
4x HT
235 HTT (I tried 240, after it started loading windows XP it would reset to the platinum screen)
Multiplier was 10.5
AGP freq 67
Vcore volt 1.60
Mem Volt default
timings default
Agressive timings disabled
Spread spectrum disabled
CNQ disabled
I hope more people post more 'successful' overclocks because I'm very sure I can do much better with the right settings. At the moment I didn't feel comfortable messing with the ram settings.

Similar Messages

Pls post here your update on ethernet problem with you imac

no connection anymore to DSL modem .. PPPoE host not available ... but it is
this is my update :
have chatted with the apple chat expert... after telling him the whole story he made some suggestions, which I have already tried ( like use another cable , etc. SMC reset )
He said, I have to bring my imac back to an authorised apple store ... hm ... arghhhh.
So I have the choice .. waiting and hope it is a software problem which will be solved by an update ... or giving back my imac and don't know what will happen with it...because up to now I haven't read any solution or proposal from Apple.
What would you do ?
Oliver

no connection anymore to DSL modem .. PPPoE host not
available ... but it is
this is my update :
have chatted with the apple chat expert... after
telling him the whole story he made some suggestions,
which I have already tried ( like use another cable ,
etc. SMC reset )
He said, I have to bring my imac back to an
authorised apple store ... hm ... arghhhh.
So I have the choice .. waiting and hope it is a
software problem which will be solved by an update
... or giving back my imac and don't know what will
happen with it...because up to now I haven't read any
solution or proposal from Apple.
What would you do ?
Oliver
Try this:
System preferences -> network
change show menu to Network Port Configurations
highlight built-in ethernet, click delete on the right side
confirm the removal
it will recreate the built-in ethernet port unchecked and probably at the bottom of the list
check the check box and move built-in ethernet to the top of the list
change Show: to built-in ethernet, click the PPP0E tab, check "connect using PPPoE" and enter your DSL information
click "PPPoE options" button and make sure you check "connect automatically when needed"
click apply now
power cycle your DSL modem
launch Safari and see if your connection is back
if that doesn't work go to Applications -> Utilities -> Network Utility
click the ping tab and ping your ethernet port (127.0.0.1) 10 times.
If it can't ping or returns packet loss, you'll more than likely want to take it in for service. You can run the Apple Hardware Test (on install disk 1) to confirm hardware issues.

KT4 Ultra Users - Post here!

Please KT4 users, post here yours machine configuration, OC config and results to compare with my system.
Clock (MHz) Mult FSB (MHz) DRAM Timing
1651.5 9x 183.5 2-3-5-3-1 fast
Results:
SuperPI: 1024Kb Calculation 1:04 (64s)
Cachemem: Read: 1600Mb/s Write 820Mb/s
Cachemem download: http://www.isocdr.hpg.com.br/cachemem.exe
Thanks,
David.
[]'s

Hi. This is to let you and others know that I couldn't achieve even a 1 fsb overclock with my KT4 ULTRA-SR The system runs excellent at stock settings, but any attempt to OC was met with a no go. I am awaiting a new bios ,as my board has the original 1.o bios on it. I saw no reason to flash ,as others with the KT4 had no success with 1.1 and bigger P/S and bigger ram. I had to download the latest issue of FUZZY4 to even get it to display.on the desktop.I guess we will see if the new bios will address any issues on the KT4 boards. BIGDADDY51 :D :D ;(

GSkill 1600Mhz Ram on NF980-G65 Please post stable settings here for 1600Mhz

G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL on NF980-G65 Mobo.
Please post here about what settings you are using to run this ram stable on NF980-G65 Mobo.
Exactly what are you setting in the bios? Voltage= ? Anything else?
Our knowledge of knowing what works & how, can be greater then what we get told by some Reps.
Please, let us help each other to help ourselves. We know better, we really use these Mobos.

Believe Mike's statement was "not going to gain anything significant" rather than "won't gain anything". In my experience, a stable 1333 is far better than a problematic 1600. With some tweaks, 1333 can rival basic 1600 performance anyway. Should as little of a gain as 1 or 2 FPS at 1600 speed be considered significant? IMHO, CPU & VGA have a bigger influence on performance than RAM. This isn't helping answer your thread's original topic question however, so I hope Vorg or others can come back with some specifics that worked for them. Many times, even with similar systems & components, the results can't be duplicated unfortunately.

Average OC with E6600-E6700 and P965 Platinum ? Post here plz

Hi.
Would love to hear what average OC with E6600 & E6700 is on P965 Platinum board is.
If other people would post your OC score and settings duo to the list under here. It would be very helpfull.
BIOS version
FSB
CPU VCore
Ram timming (Auto or mauel)
Ram frequency (Auto or Manuel) in Cell menu
Ram Voltage
NB Voltage
any other known settings to help OC more
Thx for your help

Quote from: Bluum on 17-May-07, 17:03:28
Try to stress your RAM with MemTest lychgate, then I'm sure you will find that it is not stable.
Anything over about 330MHz FSB gives me RAM error in MemTest, even with 5-5-5-15 and 1:1 divider on PC2-6400 with 4-4-4-12 as standard timings.
Trust me, it just seems stable...
You mean with the 1.5b3 bios? Well, I use orthos and superpi to test stability, and they don't give me any errors, even with 450FSB (wich I'm currently using) . Which number of memtest is giving you errors?
I think that I'll test it with memtest now, to be sure.

Pls.help my iphone stuck in recovery mode and itunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..

pls. help my iPhone stuck in recovery mode and iTunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..before it was just stuck in an apple logo but when i tried recovery mode to itunes then it stuck..

Hi awison,
If your iPhone is not recognized by iTunes on your Windows computer you may want to use the steps in this article to troubleshoot -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
This may also resolve your recovery mode issue. If it does not, use the steps in this article to resolve it -
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Thanks for using Apple Support Communities.
Best,
Brett L

*** SOLUTIONS POST HERE - To the iOS 5 & iCloud Apple ID Fiasco...

PLEASE POST ALL YOUR SOLUTIONS HERE
There are so many topics for this now, it's mind numbing to find some answers.
I'll do my best to post some realizations that I've had, and methods to work around what Apple hasn't properly explained yet.
Issue: E-mail for my Apple ID says it's "already taken" and I need to reset my password
DISCOVERY #1
When first setting up iOS 5 and iCloud on a device that has just been updated, it will automatically plug in your short formed,
username for the Apple ID and insert a saved password. On the next screen, it asks you for an email address for an Apple ID.
If you use the same email address that you always have, then it will say it's already taken.. Why is this?
The first login screen when setting up iOS 5 is asking for an email NOT a username. What your device will
automatically insert needs to be backspaced out. You'll notice the form says [example: [email protected]].
Once you put your actual email in instead of a username it will allow you to continue with setup.
DISCOVERY #2
Even when I get my iCloud set up, it tells me my email is not verified in my settings. Yet I don't get a confirmation email from
Apple in order to verify. If I login to appleid.apple.com with my email it says I havn't verified the email still. If I ask it to send
me a verification email, it won't send. If I create a new email and use that as my primary email, it'll send a verification.
I now have a separate iTunes Apple ID and a brand new email address to process my iCloud Apple ID... Do I really have to use 2?
No. After a very frustrating process of creating a separate Apple ID email and verifying through appleid.apple.com,
I logged out and decided to log back in to appleid.apple.com using my already established iTUNES username and
password... NOT the email address associated with my iTunes username!
It then showed me my quiet_dime Apple ID and asked me to link my email address I've used with it for years
to make the iCloud Apple ID and iTunes Apple ID paired into one login/profile.
I'm not sure why this is necessary, because it was already linked before iCloud. But head to http://appleid.apple.com, login with your
iTunes username and password (not your email) and link your two already existing accounts together into one.
I know there's a lot more problems than this, but if you have a FIX, please post it here!

I'm so screwed it's not even funny.
It seems I've destroyed my itunes username as nothing works to log in with that anymore.
I CAN log into itunes using my email address.
I can not update nor download any apps because my itunes username is automatically entered and no password works.
When I got to appleid and ask for email verification of my itunes ID, it says an email verification has been sent, but none arrives at any of my inboxes. Where it goes, nobody knows.
Not knowing how much it would screw me up, I deleted the new account I created in iCloud and TRIED to log in with my regular apple ID. It says I need to verify my email address.
When I go to apple ID sure enough, my email address is marked as needing to be verified. Clicking on that link does nothing.
I FOUND the email I got some time ago when I had to verify my email address and clicked the "Verify Now" link in that and the page I went to told me that MY EMAIL ADDRESS HAD ALREADY BEEN VERIFIED and that is IS VERIFIED! Except is isn't.
So now I cannot use iCloud, cannot download any apps, cannot updated any apps, cannot home shrare my itunes, cannot log in with my itunes username, and cannot seem to fix any of this.
I'm pretty screwed and there doesn't seem to be any way for me to fix any of this.

Anywhere Access: There is an error in your Remote Desktop Services Settings.

On my server2012 Essentials machine Anywhere Access is giving me this error:
"There is an error in your Remote Desktop Services Settings." and tells me it cannot be automatically repaired and to contact support.
Here's where I made my mistake: I went into IIS and changed the bindings for the Default Website to another port than 443, but then changed it back again.
Is this a cerificate Issue? Or any other cause? Could anyone help me to solve this problem?

Hi ErikLely,
Before going further, would you please let me know if the error message you described was complete? If not, please post the complete error message or provide a screenshot.
It will help us to narrow down this issue. Besides, can you remember which operation you do before this issue occurred or just sudden?
In addition, please check the Event Viewer. In Event Viewer, please follow the path:
Applications and Services Logs-> Microsoft->
Windows-> TerminalServices-LocalSessionManager and
TerminalServices-RemoteConnectionManager. If any errors you can find, please don’t hesitate to post it here and let me know.
By the way, please refer to the following article and check if configure Access Anywhere correctly.
Manage Anywhere Access in Windows Server Essentials
http://technet.microsoft.com/en-us/library/jj730374.aspx
Please also refer to the following articles and do some general troubleshooting, then check if can narrow down this issue.
Troubleshoot Anywhere Access in Windows Server 2012 Essentials
http://technet.microsoft.com/en-us/library/jj673001.aspx
Remote Desktop Services: Troubleshooting
http://technet.microsoft.com/en-us/library/ff404143(v=WS.10).aspx
Hope this helps.
Best regards,
Justin Gu

How do I transfer my MacBook Air to my wife so she can sync her iTunes account and other settings with her iPad Mini?

How do I transfer my MacBook Air to my wife so she can sync her iTunes account and other settings with her iPad Mini?

You can change the account shortname to whatever you wish to use.
As you can see from my example above. Once you click on the Create User button a new account will be created.
She will need to get her own Apple ID setup so when she starts with iTunes she can open her own iTunes account unless you both want to share the use of the same Apple ID. This can create a bit of confusion if you have your own iPads or iPhones or iPods. As you have discovered it's pretty much one iDevice with one Apple ID.
As for the iTunes library that becomes a more complicated issue.

Hello. I recently bought an Iphone 5S. I tried to charge it with the original charger that came with the phone and it doesn´t work...The cable is good, I´m charging the phone via my PC. I read many answers posted here but no one helped me. Thanks in

Hello. I have a new Iphone 5S and the charger taht came with the phone doesn´t charge my Iphone. The cable is good because I´m charging the phone via my PC. I tried every recomendation posted here but none helped me...I live in Argentina and we don´t have local support here, I would´ve ask for a new one but it´s not an option here. Does anyone know what can I do? Thanks in advance. Regards.

I live in China as well and my iPhone5s is the model A1530 I bougth outside China. I have the same problem as Nikatnight with the iPhone while the iPad Air (wifi only) is working like a charm. It must be definitely something related to the carrier since I was abroad few days ago and everything worked well.
If you pay attention at the source of your maps, you'll discover they are provided by AutoNavi instead of TomTom and make them appear in chinese with their own border interpretation. Queries are only acceppted in Chinese (p.e. if I type in english "Los Angeles International Airport" it replies it cannot locate it)
I suppose everything will be fine when you'll be out of censorship....
Perhaps iOS Apple Maps are absolutely useless for expatriate in China.
Use Google Maps instead
BTW, I'm surprised how much Apple might prostrate towards hard power Governments.... No matter what, money are always on top!

Siri Can't Post To Facebook "Sorry I'm afraid I can't post to your Facebook, I'm not sure what happened" iOS 8.3

I've had trouble with this for quite a while now. Not sure what the issue is. I have an iPhone 6+ running the current software iOS 8.3 & when I try to post a Facebook status through Siri she responds with something along the lines of "I'm sorry. I can't post to your Facebook. I'm not sure what happened." Not sure what's causing this issue as I have the Facebook app installed on my iPhone as well as being signed in through the settings app. Note: this is an issue only with Facebook. She is able to post tweets with no with no issue.
Thanks for the help!

Can't connect to the iTunes Store

Ipad syncing but won't go past agreement (was told to post here)

Hi,
I was told to post here as its more relevant to itunes
A friend has purchased an Ipad but is having a problem. When you plug it into mac it comes up in itunes and you have to agree the terms and conditions. You press Agree but the page never changes! and that means she can't sync the Ipad or anything
The laptop is connected to the internet is aswell (before you ask! haha)
Hope you can help
Many thanks
Joe

Jenn,
If you cannot run Repair Disk from Disk Utility you are ARE NOT running it from the original Install Disk that came with the computer or the Snow Leopard Upgrade Disk you purchased. Please follow the directions I provided and you should be able to run Repair Disk form Disk Utilities.
Regarding Best Buy I would recommend NOT taking it to them for repair, if you have an Apple Store in your area please take it there. If you don't have an Apple Store within a couple of hour drive use this link to locate an AASP to take your machine to.
I am assuming you have your Time Machine backups on an external HD. If so they are safe for now. In the event you need to reformat the internal HD on your MBP and reinstall OS X you can use the TM backups to restore from.
Regarding "do you think copying the disk as mentioned (from the disk utility) would work?" No that would not work.
Lets first see if Disk Utility can repair your internal HD. If for some reason that fails then you can run Apple Hardware Test and see if any HD errors are reported there. And finally if that doesn't come up with anything then you can make an appointment at an Apple Store or AASP.

PWA site template with warning "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings"

SharePoint 2010 (SP2010 SP1+ AU CU 2011) site built with Project Web Access template shows message in yellow "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings."
KB Article http://support.microsoft.com/kb/2749599/en-us suggests applying Windows and SharePoint updates, but does not points to a specific update. Also suggests to enable "Always follow
web settings" for affected users who are in different time zone than the server time zone, but it does not work either.
Manjeet Singh

Hi,
According to your post, my understanding is that SharePoint 2010 (SP2010 SP1+ AU CU 2011) site built with Project Web Access template shows warning "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings".
Users are getting this message even after correctly specifying and changing the timezone in their Sharepoint Settings. This is a common problem across the net, but we've found a workaround
that will eliminate this problem.
Step 1: Open your Web Database in your Browser
Step 2: Click the Arrow Under the Login ID (upper right corner)
Step 3: Choose My Settings
Step 4: Click the My Regional Settings Link
Step 5: Uncheck the 'Always Follow Web Settings' check and specify your time zone.
Step 6: Click OK
For more information, you can refer to:
Warning Message about time zone difference between your computer and the regional settings
of Sha...
Thanks & Regards,
Jason Guo
Jason Guo
TechNet Community Support

Told by suport to post here with my 4.0 "problems"

Ok. Worked just like everyone else phone before the 4.0 update. No hacked/cracked or jail broken 3G just your average user here. After the LOOOONG update, my Battery life goes from an already shot life (but at least a day use) to 40 min to 1 hour of sloppy use and then the "20min warning" that gives me not 20min BUT 3-5MIN!
Phone is slow to open ITS own apps such as text. Ok trying to deal with my phone lagging 20-30sec just for the text app to show on the page, then typing much faster than the keyboard can keep up )Folks im a slow typer ok) and it lags to "keep up with me!" now remember it already is lagging so it takes 2-3 pushes of a contact name to even start the typing!
All other apple apps NOTES opens slow laggy, the camera (oh lord dont let there be something i need to take a fast pic of because its was an already slow app now just SUPER slower..same with contact use or PHONE use. When I type in a phone number to call, nothing is shown on screen for a few sec! NOT EVEN 911!!!! bad apple, bad 4.0! this is nuts, hey, I paid for my phone like the rest of you, I got suckered into the 2 year FORCED contract that ATT has if you even "want an iphone" why is my phone laging, slow and at times frozen, even after a FULL reset through itunes??
Oh and by the way, I did the test account (you know no apps installed but only apples, and still lag lag freeze! not to mention no solution for me other than PLEASE GO TO bla bla bla apple support and post there your problems, Thank you for calling apple, oh yes sir you do have the extra support that you paid for, but have a nice day and please do post on our website!!!!!!)
YEP Thats my iphone 3G 4.0 software nightmare! cant even call 911 on time without a freeze or lag! thanks for any replies and reading my story,,(oh its much longer but i just did more full restoring so im extremely bent/tired)

C'mon please.
No one with an idea?

SP324081: Check that your Internet Explorer security settings will allow JavaScript and cookies. If enabled, please contact support.

Hi,
I have VS2013 update 4 and IE11 installed. When I try to sign in through VS I get the following error.
SP324081: Check that your Internet Explorer security settings will allow JavaScript and cookies. If enabled, please contact support.
I have checked and JAVASCRIPT and cookies are enabled.
Any help is appreciated.

Hi Sath12,
If possible, I suggest you reset IE settings.
Please lower the security level. Then I added the site like https://*.visualstudio.com/ to the trusted zones. Test it again.
I have met this issue before which was related to the IE settings or the account issue.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/290948f6-b4ca-41e3-9888-91fbbc71cdeb/cannot-register-sign-in-from-vs-express-2013?forum=visualstudiogeneral
A connect report still shared some information about it:
https://connect.microsoft.com/VisualStudio/feedback/details/811860/vs-express-2013-for-web-browser-is-security-restricted-or-javascript-is-disabled
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Post Here YouR (OC) Bios Stable Settings.

Similar Messages

Maybe you are looking for