Post-Install Issue - Windows Installer runs every time CRW XI R2 loads

I have XP SP3. If I uninstall CR XI SP2 and re-install CR XI from cd, it loads perfectly - no windows installer. When I uninstall CR XI, and re-install CR XI SP2 from the saved download on my harddrive, the Windows installer runs every time I load it; it seems to think it's never been run before. Takes 3-8 minutes to load every time, which is completely annoying.
I have also tried downloading that full build of XI SP2 3 times - and uninstalling/reinstalling. Makes no difference.
I know this is not a design issue, but I didn't know where else to turn. I have been tolerating this issue for about 18 months and I can't take it any more!
Thanks!

Hi,
Please try using other computer units then update me the result, the purpose is to check if your unit OS may be the problem.
Regards,
Clint

Similar Messages

I-tunes not kompatibel with Windows 8. Every time I want to load my Ipod or Iphone I have to change the compability to, for instance windows vista. Otherwise Itunes refuse to recognize my Ipad/phone. Can I expect that Itunes will "fix" this problem? Carin

I have problems with I-tunes and the compability with windows 8. Every time I whant to load my Ipod/Iphone Itunes doesn´t recognize the pod/phone. If I change the compability to for instance windows vista it works ok.
I guess that I need some update of Itunes?
carin

Hey carin205,
I would run through the troubleshooting steps in the following article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Welcome to Apple Support Communities!
Regards,
Delgadoh

Published GPO login script Office installer runs every time launched

I was working on a test environment with my own machine to deploy OCT Office 2010 ProPlus config.
It is now launching an installer every time I open any office product. It then says "fatal error during installation". I cannot uninstall it, it doesnt even popup the office uninstaller window. Change also does not work. I also
cannot reinstall with a clean setup copy disc.
I have tried:
1) http://social.technet.microsoft.com/Forums/en-US/65070a09-b229-4eb1-bc4f-b9962a4b1864/office-2010-professional-plus-reconfiguresreinstalls-every-time-i-launch-an-application?forum=officesetupdeployprevious
2) http://support.microsoft.com/kb/290301
The GPO is now deleted and not running anymore - but this is still occurring and I cannot figure out how to resolve.
Thanks for any help in advance!

Seems that you deploy Office through OCT but meet the unhappy thing during the installaion.
Tried the Windows Installer Cleanup Utility (MSICUU2.exe) and modify the one of registry key but the Office still stay there but failed to be removed.
At this point, I recommand that we perform the steps in following link and remove Office 2010 suite compeletely.
http://office.microsoft.com/en-us/support/how-to-uninstall-or-remove-microsoft-office-2010-suites-HA104027750.aspx
For the reason why we receive the error message ""fatal error during installation", please reference to the article：General troubleshooting for installing Office 2013 and Office 365 (it also
applies to Office 2010)
If you want to further analyze the root of the installation issue, view the Office setup log is a good choice.
http://support.microsoft.com/kb/826511/en-us
Thanks.
Tony Chen
TechNet Community Support

CR XIR2 installer runs every time designer is opened!?!?!

I just updated a CR XI installation to R2 and now every time I open the designer a dialog appears stating "Please wait while Windows configures Crystal Reports XI Release 2". It shows about 5 or 6 times then I get a dialog stating "This action cannot be completed because the other program is busy...".
What is going on? How can I make it stop doing this????
Does ANYTHING with Crystal Reports work properly? My entire week has been wasted on Crystal Reports issues.

I have seen this happen before. It usually means there is some kind of OS corruption in the Windows Installer registry and is not necessarily CR specific (I have it happen with Frontpage all the time) nor is it OS specific (have seen it in XP Pro as well as Vista Ultimate).
Fuskie
Who usually uninstalls then reinstalls the application...

Why can not I install iTunes on Win 7 installation appears every time the next sunrise; service, apple mobile device, failed to start verify that you have sufficient privileges to start system services Please help me

Why can not I install iTunes on Win 7 installation appears every time the next sunrise;
service, apple mobile device,
failed to start verify that you have sufficient privileges
to start system services
Please help me

The most complete instructions for resolving the issues with the new iTunes is in the user tip: https://discussions.apple.com/docs/DOC-6562

I have tried EVERY suggestion Adobe has made and no matter what, I get the black "Adobe Reader Installer" screen EVERY TIME!! Any suggestions to help me overcome this problem would be appreciated. BTW: I have a Windows 7 Home OS. I prefer FireFox. I

I have tried EVERY suggestion Adobe has made and no matter what, I get the black "Adobe Reader Installer" screen EVERY TIME!! Any suggestions to help me overcome this problem would be appreciated. BTW: I have a Windows 7 Home OS. I prefer FireFox. I have successfully downloaded Adobe Reader using all the major browsers, however it does NOT matter, I am NOT able to actually install Adobe Reader, every time all I get is the black pop-up "Adobe Reader Installer" screen!!!

PS.... I had a previous version on my computer that needed to be updated.... so I uninstalled it because I was having trouble installing the new version.... so even that did not help!!

I am running Itunes in Windows 7. Every time I exit, it restarts in a few seconds. If I restart my compter and forec close it, it does not restart, but If I use it at all the whole loop starts again.

I am running Itunes in Windows 7. Every time I exit, it restarts in a few seconds. If I restart my compter and forec close it, it does not restart, but If I use it at all the whole loop starts again.

Sorry, just to confirm, I DID NOT ACTUALLY ANSWER MY OWN QUESTION!
I replied to the previous message from my iphone and I managed to hit the link to "This has answered my question" by accident!
I AM STILL LOOKING FOR A RESOLUTION TO MY ORIGINAL PROBLEM. CAN SOMEONE ALSO NIW TELL ME HOW TO GET RID OF THE GREEN TEXT TGAT SAYS TGAT MY QUESTION IS ANSWERED? That is a pain! It should at least ask you to confirm that your question is actually answered and you didn't hit it by mistake, like I did!

HT5568 I cannot update safari to 6.0.2 - I get for months "An error occurred while installing the updates.(103)" every time. I have Mac osx 10.8.2 Mountain Lion. Is Apple asleep?

I have Mac osx 10.8.2 Mountain Lion.
I cannot update safari to 6.0.2. "An error occurred while installing the updates.(103)" every time. I have Mac osx 10.8.2
Is Apple asleep?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list. Post the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

New Icloud Terms and Conditions window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months.

'New Icloud Terms and Conditions' window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months. When I click, 'view terms' it takes me to my Icloud section in settings, but the terms don't pop up. I plugged it into my iTunes to see if it would pop up, but that didn't work either. My phone is updated, and I'm pretty sure I already accepted the new terms and conditions on the last update a few months back.

Hi munaxnight,
If you are having issues with your iPhone continuing to ask you to accept terms and conditions, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPhone -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

I cannot open the store (using Windows 7). Every time I try there is a blockpage.

I cannot open the store (using Windows 7). Every time I try there is a blockpage.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Why do I have to repeat the installation process every time I turn on my PC?

Why do I have to repeat the installation process every time I turn on my PC?

Why do I have to repeat the installation process every time I turn on my PC?
Because you never run the install of whatever program you are referring to with sufficient user privileges and it thus never "sticks". Run as admin, turn of security tools, let the install finish properly. If you need more guidance, provide system info and tell us what program you actualyl mean.
Mylenium

I just installed the yahoo messenger. Every time I do that my extensions go missing. How do you fix this instead of having to keep re installing firefox?

I just installed the yahoo messenger. Every time I do that my extensions go missing. How do you fix this instead of having to keep re installing firefox?

hello, this sounds like the files in your [[Profiles|profile folder]] that store the information about your extensions might have become corrupted. please go to ''firefox > help > troubleshooting information > profile - show folder...'' then windows explorer should open up your profile folder. in there look for the files named extensions.ini, extensions.sqlite, extensions.sqlite-journal (and in some cases also extensions.txt, extensions.rdf). delete or rename those files and quit firefox, they will be regenerated the next time you launch firefox.
also see [https://support.mozilla.org/en-US/kb/Unable%20to%20install%20add-ons#w_corrupt-extension-files Corrupt extension files]

Captivate 8 Continually Crashes: When trying to publish, When trying to use the Object Style Manager. Also it is blocked by Windows Firewall (adobecaptivatews) every time it launches. Working with Captivate App Packager the pane to import from Adobe Edge

Captivate 8 Continually Crashes: When trying to publish, When trying to use the Object Style Manager. Also it is blocked by Windows Firewall (adobecaptivatews) every time it launches. Working with Captivate App Packager the pane to import from Adobe Edge is missing, so not clear how to import. Overall it seems unstable. Am I doing something wrong? Trying to evaluate before buying so working on a trial version (14 days left), but a bit concerned with Captivate 8 Performance. Please help! :-

Hi Vikram and Lilybiri,
Thanks for your responses :-)
I'm working on Windows 8.1... I think that I may have found the issue... I was saving the file in a project directory rather than the default My Captivate Projects folder...
Perhaps Captivate was struggling to find resources it needed?
It hasn't crashed for a while now, though it is struggling - I'm working with a 54 slide PPT presentation that is linked and it takes a very long time to interact.
Sometimes it says that I've removed slides, which I haven't?
Best,
Christy.

I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?

I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I have windows 7 and every time I try to play or add a song. It says itunes has stopped working. Please help this is frustrating.

I have windows 7 and every time I try to play or add a song. It says itunes has stopped working. Please help this is frustrating.

a further message box states that Data Execution Prevention has closed the program.
Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

Post-Install Issue - Windows Installer runs every time CRW XI R2 loads

Similar Messages

Maybe you are looking for