Post-Install Question

I recently installed ECC 6.0 SR3 with Java Add-in.
OS is Windows 2003 (around 6.5GB of physical memory)
I was performing post install configs but not sure for about the following pararms,
Please can youu2019ll suggest me some recommended values:
I plan to set Env Variable CPIC_MAX_CONV to 200
What values should I use for:
qw/max_conn
qw/max_sys
qw/max_overflow_size
qw/max_shm_req
Thank you,
CD

> 1. After fresh install is the variable CPIC_MAX_CONV set to some default value or it needs to be.
If the environment variable is not set the default value is 100.
> 2. Is there a calculation/process to determine the profile parameters gw/max_conn and gw/max_sys or they are not directly related.
CPIC_MAX_CONV are the maximum number of conversion IDs, gw/* parameters are for the gateway. I'm not sure if it's technically possible to use the same connection (seen from the gateway) with different/multiple conversion IDs so I'd say gw/max_conn is related to CPIC_MAX_CONV, yes.
You can check in the system itself the default values using transaction RZ11 (btw: including the documentation).
Markus

Similar Messages

  • Please answer asap install question post

    https://support.mozilla.org/en-US/forums/firefoxaurora/708210?last=46112#post-46112
    please answer asap install question post

    Hi C,
    No, you should wait till the end of the Welcome video, when the message says it will restart to finish installation it means installation is still in progress, conclude the procedures.
    Happy installing, good luck.

  • PI 7.11 sp5 post install steps - SLD update hangs in IE browser

    Hello gurus,
    This is my first shot at installing PI ever.  We decided to go with PI 7.1 EHP1 and SP5.  I think the latest may be SP6.
    At any rate, we're doing this on AIX 6.1 and Oracle 10.2.0.4.
    I followed the install Guide exactly.  Did the sapinst, oracle and patch. Next, I manually updated the KERNEL, IGS , JVM, Then I updated SPAM, SAP_BASIS, then all the other abap components.  Then did JSPM and all those components.  Everything matches SP5 for PI 7.11
    https://websmp204.sap-ag.de/maintenanceNWPI71
    SAP_ABA     711     0005     SAPKA71105
    SAP_BASIS     711     0005     SAPKB71105
    PI_BASIS     711     0005     SAPK-71105INPIBASIS
    ST-PI     2008_1_710     0003     SAPKITLRE3
    SAP_BW     711     0005     SAPKW71105
    ST-A/PI     01M_BCO710     0001     SAPKITAB8F
    Now I'm doing the post install steps that are in the instguide.  THere are tons of steps, but let me go over the big ones and where I'm having a problem:
    READ ALL THESE NOTES:
    Note 1309239 - Configuration Wizard: PI NetWeaver initial setup
    Note 1286149 - Configuration Wizard: PI Self Test for NetWeaver
    Note 1107808 - Collective Note: Configuration Wizard 7.1
    Note 1286428 - Configuration Wizard: PI Wizard Templates overview
    Note 1115280 - PI CTC: Running SAP NW for PI in a different client
    At this point, based on being at PI 7.11 and SP5, I did the client copy.  from 000 SAP_UCUS to my new 400 client.  Then I did 001 SAP_USER to my new 400 client.
    Then I followed the steps to link the java UME from 001 to 400.  No problem after restarted SAP, it goes to 400.
    Now, the next step as I see it is to run the initial config wizard out of NWA.  I did that, no errors.
    My problem is when I get to updating the SLD.  I started at cimsap 1.5.42 and CRDelta 5.0....
    I updated cimsap to the cimsap51509_1-20005942.zip which took me to 1.6.9
    Next, I tried to import CRDelta51509_1-20005942.ZIP.  I "browse" to find it during the import, but when I click the "IMPORT" button, my browser hangs...
    I don't even get to the next page where it would be one more "warning/info" before I could really start the import.
    I didn't find anything in the work directory or the cluster/server0/log directory.
    I search all through SDN/OSS but could not find anyone who had this problem.
    Where did I mess up?  Are there other config wizards I should have run before I tried to update the SLD? 
    --NICK

    Hey Caio,
    Thanks for the response but it doesn't actually answer my question.  But to that point, for a "basic" PI post install, which of the NWA config tasks would you run other than the "initial config" ?  And would you run them BEFORE you updated the SLD content (cimsap/CRDelta) ?
    NW: PI - AS ABAP (Basic Configuration for Idoc, Proxy): Maintain
    PI Adapter Engine in JPR Mode
    PI Demo Client
    PI Full Qualified Host Name
    PI Self Test for NetWeaver
    PI SLD Self Registration
    Specifically, I did the SAPINST - ABAP/JAVA patches - Client copy - and THEN the initial config wizard (Setup a new local SLD, ).  Also, during the initial config, I clicked the box marked "This SLD will be used as a name server for development" and my PI server hostname was already in the box  marked "object server name".  This config took about 30 minutes.  I didn't see any errors or warnings.  although I didn't view the log.  I did go into Java JEE services and Filter for Services with name "XPI".  All were green.
    THEN I tried to update the SLD content.
    any thoughts appreciated.
    NICK

  • A few post config questions on new setup

    Hi Group,
    Just a few post config questions.
    First, how can I confirm my controller is in fact associating properly with an NTP server?  On a typically cisco product, I could just do a 'show ntp associations' or a 'show ntp status'.  I cannot see a way to confirm this on the gui or command line.
    Second, on my guest network with web-auth, if one were to choose to not use https for web-auth and instead use unsecure http, would that be possible and if so where in the gui?
    Thanks.

    The third field is from a WLC running v7.4 not v7.2.  I usually would install a 3rd party certificate, but what eles you can try is issue this command on from the CLI.  It had issues working with certain code versions, but you might as well give it a try.
    config network web-auth secureweb disable
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • Post install checks failed for DBC file - Oracle App11.5.10.2 Linux  5.3

    Hi everybody,
    I tried Installing Oracle E-Business Suite 11.5.10.2 on Red Hat Enterprise Linux Server release 5.3
    The Post install checks failed for DBC file, HTTP, JSP and PHP. Apparently the DBC hadn’t been created. I had verified the log file, while executing adgendbc.sh, it throwing below error.
    Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi.bangalore.bedford.local_vis.dbc
    DBC generation failed with exit code 127
    Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi_vis.dbc
    DBC generation failed with exit code 127
    Updating Server Security Authentication
    Updating Server Security Authentication failed with exit code 127
    adgendbc.sh exiting with status 127
    ERRORCODE = 127 ERRORCODE_END
    .end std out.
    touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
    sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
    mkdir: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    /jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    .end err out.
    Thanks in advance.
    sreejith

    Welcome to the forums !
    Pl post EBS related question in the EBS forums at http://forums.oracle.com/forums/category.jspa?categoryID=3
    HTH
    Srini

  • Post-install of SSM 4.0 and client-copy

    We finished the installation of Sol. Man. 4.0 on a linux/oracle platform.  At what point in the post install do we do the client copy of client 000 for data and client 001 for users to a new client? Before, during or after all the img config in 000?
    thanks in advance,
    Steven McElwee, Duke University
    PS- Sap's install docs for SolMan 4.0 leaves much to be desired ...

    Well, we had a chicken-and-egg issue here. Let me explain. By default, the SSM 4.0 SR2 install is at SP9, which gave it a somewhat simpler IMG. However, we gave in to the temptation of installing SP11 since this SPs were obtainable without Maintenance Optimizer, which gave us a more complicated IMG which includes, at some point, the client copy as mentioned above. We went through most of the IMG resulting from SP11 until we had Maintenance Optimizer working and then downloaded SP12.
    I am in the process of installing the ABAP SP12 packages now and plan tomorrow to deploy the JAVA SP12 .SCA files. The IMG looks better and less confusing at SP12 than at SP11 or SP9. I think this calls for another IMG pass.
    The $100 question - which parts of the IMG need to be done in client 000 and which to do in our client 100 (copied from client 000 after SP11 was applied). We are really confused on this point. If anyone can shed some light on this, i would very much appreciate it.
    Sincerely,
    Steven McElwee, Duke University

  • I posted a question 22 minutes ago and it says answered but i got no answer to my question of why my trial version of photoshop elements 7.0 says invalid serial number when i put in the correct serial number in it says the same number in my account and oc

    i posted a question 22 min ago and says answered but i got no answer i downloaded a trial version of photoshop elements 7.0 but when i put my serial number from my account saying oct 8 2014 it comes back invalid serial number where are the experts avaiable 24/7 and where do i get my answer chat said mention case number 0213950594 so why is my 1st post marked answered and where is my answe or where do i get it

    HI thomascannonjr,
    Please tell us if you are installing on Windows or Mac.
    Do you have any other Adobe Product installed on the system?
    Did you download Photoshop elements from this link:
    Download Photoshop Elements products | 9, 8, 7
    Regards,
    Sandeep

  • ABAP & Java Preview install done. Need Post install steps for XI.

    Hi
    Please excuse for the most basic question.
    From the trial downloads, I've installed the
    ABAP and Java and would like to know the
    post-install steps for activating and configuring
    the Exchange Infrastructure component and
    subsequent configuration
    I've installed on the local host along with the
    Microsoft Loopback Adapter. What should be
    the connection parameters for the Visual
    Administrator?
    Any help is appreciated. Thank U.
    Rajendra.

    Hi Rajender
    I think no question is difficult or basic .The severity depends on whether you know it or not,in other terms your comfort level.
    Coming back to your post:Go through the below link
    https://websmp103.sap-ag.de/~sapidb/011000358700001697502004E.PDF
    Re: XI INSTALLATION and POSTINSTALLATION
    If you need the XI configuration guide then visit:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
    Any issues feel free to ask
    Reward with suitable points:

  • Post install package installation on RHEL5

    Hi,
    Can I have some advise please.
    When I installed Oracle's RHEL5 Linux OS I failed to select quite a lot of packages that I needed (like Apache for example.)
    I've been double clicking on the RPM packages and getting lots of dependacy errors and searching though the other CD's trying to find the dependencies and of course running into more dependancy problems.
    I am not yet in a position to buy the support agreement as I just want to get the server working!
    So my question is - Is there any easy way to do post install package upgrades/installs or should I just reinstall the OS?
    I didn't have these problems with RHEL4 so any help would be appreciated. If I have to reinstall thats OK, I'm just getting nowhere fast at the moment.
    Kind regards,
    James
    ps I tried copying all the RPMS to the server and running createrepo but that didn't help either and of course, simple packages (with no dependents like sendmail-cf worked fine)

    Hi,
    Well rather then complaining I just went ahead and manually resolved all my dependencies.
    To make this convenient I copied all RPM's to the server and issue rpm -ivh enough times till I found all dependencies.
    Issues arose when the required rpm wasn't identified by it's rpm filename but a quick search on Google identified the rpm to which the SO belonged.
    As an example installing 'squirrelmail' took about 15 rpm runs until successful. Whilst this doesn't compare well with 1 yum run :-) it really didn't take very long.
    Kind Regards,
    James

  • Post install of v2

    Anyone have the list of post-install items that need to be done to get the Discoverer portlets working.
    Docs aren't real clear on the post-install tasks & I can't get the portlet provider for Discoverer to register.... Getting JAZN permission denied errors..
    Thanks,
    Dennis

    Well, we had a chicken-and-egg issue here. Let me explain. By default, the SSM 4.0 SR2 install is at SP9, which gave it a somewhat simpler IMG. However, we gave in to the temptation of installing SP11 since this SPs were obtainable without Maintenance Optimizer, which gave us a more complicated IMG which includes, at some point, the client copy as mentioned above. We went through most of the IMG resulting from SP11 until we had Maintenance Optimizer working and then downloaded SP12.
    I am in the process of installing the ABAP SP12 packages now and plan tomorrow to deploy the JAVA SP12 .SCA files. The IMG looks better and less confusing at SP12 than at SP11 or SP9. I think this calls for another IMG pass.
    The $100 question - which parts of the IMG need to be done in client 000 and which to do in our client 100 (copied from client 000 after SP11 was applied). We are really confused on this point. If anyone can shed some light on this, i would very much appreciate it.
    Sincerely,
    Steven McElwee, Duke University

  • SOLMAN 4 Post Install problem

    Need Help on this following ENVIRONMENT
    SOLMAN4.0 (ABAP+JAVA) STACK
    DB:MSSQL 2005
    OS:WIN2003 (32bit)
    JAVA: JRE_1.4.2_12.
    After restarting the server the J2EE engine as expected and i have to log into SMICM and send restart j2ee instance. WIll changing the rdisp/j2ee=0/1 paramter to 1 would resolve this problem or are there any post install steps which i need to check for the java stack, The install doc didnt have much information about JAVA.
    Thanks in advacne

    Srini,
    I had tried loggin http://localhost:50100 (01-instance) but it throws me 404 error page cannot be displayed only after i send the restart--J2ee from SMCICM will this allows me to loggin to http://localhost:50100. My questions is after every restart of the server do i have to run this SMICM (to restart the J2ee) shudnt it re-start automatically.. Does setting the paramter rdisp/j2ee would allow for this change to happen.
    2Q) What post install steps should i do for the JAVA side (the Instal document wasnt helpful) Any help or location of notes is highly helpful.
    Thanks
    Thanks,
    MIT

  • Basic install question for Flex on CF 7.02

    Hello,
    I've been trying to get Flex working on CF 7.02 and I'm
    reading very different and conflicting stories.
    Firstly I have CF 7 running on 2003, and then installed the
    updates for7.01 and then 7.02 .
    I installed as a single server instance.
    Reading here, I just need 7.02 and I should be fine
    http://www.adobe.com/devnet/coldfusion/articles/fr_fds.html
    This here tells something completely different, with lots of
    config files
    http://www.adobe.com/support/documentation/en/flex/1/flexforcf.html
    What is most annoying is that I had it working on a local
    server and it was fine. But this was installed over a year ago, and
    I don't have a steps taken that made it work. That server is now
    being used for something else.
    I don't know if I need the FDS or Lifecycle to be installed
    as everything I read says FDS is part of CF.
    I have also read that FDS express can be downloaded and run
    on a Java server, and that it doesn't need cF, but this in not the
    solution to my problem..
    To summerize:-
    I need to get Flex apps running on CF 7.02 in a production
    environment.
    Do i need do install anymore than CF, if so how much does it
    cost?
    I'm not a CF programmer, and don't know much about it, I
    usually deal with MS stuff
    Thanks very much

    Thanks again EJ, I really appreciate your ongoing help here. With some difficulty I was able to post this;
    https://communities.oracle.com/portal/server.pt/community/view_discussion_topic/216?threadid=380585&Portlet=Create%20Discussion&PrevPage=Communities-CreateDiscussion
    I just want to verify this new community is set-up correctly; I have two accounts for the Oracle site, this one (linked to my gmail email) and another linked to my work email (I can log support cases with the latter).
    I'm not able to hit that community from this account (linked to my gmail email), the error I get is;
    We are sorry, we could not log you in. We apologize for the inconvenience. One of the following might have happened: You don't have a valid Customer Support Identifier. Your privileges are not up to date. This should be resolved by logging in into My Oracle Support. Internal error in the login process.
    The bit about the support identifier in the error message led me to try my work account - with some trouble I was able to get in and post the question above.
    Is this new community only open to people with a support identifier?
    EDIT>>>>: Getting that error with both accounts now. I realize you don't "support the forums", just let me know if you think the new forum has been setup correctly. Thanks again EJ.
    Paul
    Edited by: Paul Smith on 21-Jun-2012 12:35
    Edited by: Paul Smith on 21-Jun-2012 12:38
    Edited by: Paul Smith on 21-Jun-2012 12:38

  • Post instal Rapidwiz linux64 bit errors RW-50015 HTTP Listener

    New Installation of R12.1.1 on Linux x86-64
    using zip files from e-delivery
    created staging dir successfully
    Ran rapidwiz
    selected new Installation and Express Installation
    Rapidwiz worked and installed all files but it failed at the end during validation for post install
    when showed screen for Validate System Config the post-install check:
    I had error in HTTP (RW-50015: Error: - HTTP Listener is not responding)
    details of error:
    HTTP
    checking URL = http://localhost.localdomain:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    some other facts,
    I cannot run sqlplus, no access to database.
    it seems environemt variables are not set as echo shows empty value.
    since the HTTP RW-50015 error is known issue, i have tried several solutions, but no luck:
    tried solution 1:
    I was able to run APPSVIS_localhost.env
    however i canNOT connect to sqlplus
    therefore no access to database:
    pwd
    /d01/oracle/VIS/apps/apps_st/appl
    [root@localhost appl]# chmod 777 APPSVIS_localhost.env
    [root@localhost appl]# ./APPSVIS_localhost.env
    [oracle@localhost appl]$ ./APPSVIS_localhost.env
    [applmgr@localhost appl]$ ./APPSVIS_localhost.env
    [applmgr@localhost appl]$ cd /d01/oracle/VIS/db/tech_st/11.1.0/bin
    [applmgr@localhost bin]$ ./sqlplus
    ./sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
    [applmgr@localhost bin]$
    when echo oracle env variables they are all empty:
    for example:
    [oracle@localhost scripts]$ echo $APPL_TOP
    Then I tried commands $ADMIN_SCRIPTS_HOME/adstpall.sh apps/apps and restart with adstrtal.sh:
    couldn't even use script v as I got error:
    [oracle@localhost VIS_localhost]$ cd /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts
    [oracle@localhost scripts]$ ls adst*
    adstpall.sh adstrtal.sh
    [oracle@localhost scripts]$ ./adstpall.sh apps/apps
    You are running adstpall.sh version 120.10
    adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
    USAGE:      adstpall.sh <appsusername/appspassword>
    adstpall.sh: exiting with status 1
    also in another question in forum
    RW-50015: Error: post R12 installation on Oracle EL 5 (X64)
    it is asked to try this:
    ... commented out the following line:
    #eval ohs_start -DSSL "$args"
    ... and replaced it with:
    eval ohs_start "$args"
    I have not tried this, i think my issue is with database and sql which cannot be accessed.
    solution 2:
    Tried workaround from Note 943443.1
    but first i cannot see any file with # ls libdb*:
    [root@localhost inst]# cd /usr/lib
    [root@localhost lib]# ls libdb*
    ls: cannot access libdb*: No such file or directory
    after running the command from the Note:
    [root@localhost lib]# pwd
    /usr/lib
    [root@localhost lib]# ln -s /usr/lib/libgdbm.so.2.0.0 /usr/lib/libdb.so.2
    now, I can see libdb.so.2:
    [root@localhost lib]# pwd
    /usr/lib
    [root@localhost lib]# ls libdb*
    libdb.so.2
    then click on Retry in the rapidwiz screen where it showed the error (Validate System Config)
    but still fails with same error:
    HTTP
    checking URL = http://localhost.localdomain:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    solution 3:
    tried to stop and restart services:
    [oracle@localhost VIS_localhost]$ pwd
    /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost
    [oracle@localhost VIS_localhost]$ ls -ltr add*
    -rwx------. 1 oracle oracle 2785 2009-12-02 17:37 addbctl.sh
    -rwx------. 1 oracle oracle 4119 2009-12-02 17:37 addlnctl.sh
    [oracle@localhost VIS_localhost]$ ./addbctl.sh stop
    You are running addbctl.sh version 120.1
    Shutting down database VIS ...
    sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
    addbctl.sh: exiting with status 127
    [oracle@localhost VIS_localhost]$ ./addbctl.sh stop
    You are running addbctl.sh version 120.1
    Shutting down database VIS ...
    sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
    addbctl.sh: exiting with status 127
    your help is highly appreciated
    thank you!

    Thank you
    items 1, 2 and 3 are answers to your questions,
    I think you pointed to an important section as i have feeling something is
    wrong with this simple default choice of localhost.localdomain.
    please also see #4 as it has new information (the rapidwiz error are fixed now
    but i still don't have access to anything)
    1-) file: /etc/hosts
    i have 2 lines in this file
    [oracle@localhost etc]$ pwd
    /etc
    [oracle@localhost etc]$ cat hosts
    127.0.0.1 localhost.localdomain localhost
    ::1 localhost.localdomain localhost localhost6.localdomain6
    [oracle@localhost etc]$
    2-) file: /etc/sysconfig/network
    i have 2 lines in this file:
    [oracle@localhost sysconfig]$ pwd
    /etc/sysconfig
    [oracle@localhost sysconfig]$ cat network
    NETWORKING=yes
    HOSTNAME=localhost.localdomain
    3-) per step 3- of note 761564.1 I deleted file (using root accout):
    /etc/sysconfig/networking/profiles/default/network
    (before deleting i made a backup network-bak, just in case):
    [oracle@localhost default]$ pwd
    /etc/sysconfig/networking/profiles/default
    [oracle@localhost default]$ ls -ltr
    total 16
    -rw-r--r--. 3 root root 230 2009-11-29 19:12 ifcfg-eth0
    -rw-r--r--. 2 root root 112 2009-12-02 16:42 hosts
    -rw-r--r-- 1 root root 53 2009-12-03 21:31 resolv.conf
    -rw-r--r-- 1 root root 31 2009-12-04 02:37 network-bak
    [oracle@localhost default]$
    4-)
    I made so many changes to dir access permissions using chmod 777,
    also i checked mark some of the apache entries in Linux > System > Admin > SE Linux Management.
    after that i accidently clicked on the "Back" button (on the rapidwiz screen where it had
    the errors),
    then I clicked Next button ( which of course went to the same screen I had error on )
    then I clicked on Retry button and it appeared it fixed errors.
    Rapidwiz confirmed all sections are ok,
    no errors anymore.
    (Previously i always clicked on Retry button only, but this time, clicked on Back, then, Next button,
    then Retry button).
    I am not even sure changes i made fixed the errors or this is just a bug in rapidwiz,
    but right now, I completed rapidwiz and all errors are fixed,
    however I still don't have access to anything:
    Started firefox and try to go to:
    http://localhost.localdomain:8000/QA_HTML/AppsLogin
    it says Unable to connect
    (by the way do I have to download IE and try in there or should it work in Firefox as well ?)
    I am unable to run sqlplus
    I don't have anyvalue in the environment variables, they are still empty.
    I also ran steps 2.2 and 2.3 from note 3877859.1 (using AutoConfig to manage System Config EBS R12):
    2.2
    [oracle@localhost /]$ sh /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost/adautocfg.sh
    AutoConfig completed with errors.
    2.3
    [oracle@localhost /]$ sh /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts/adautocfg.sh
         Configuring IES_TOP.......COMPLETED
         Configuring CSD_TOP.......COMPLETED
         Configuring IGC_TOP.......COMPLETED
    AutoConfig completed with errors.
    still same problem, didn't change results.
    Thank you for your help!

  • About NW 5.1 licenses: Where do I post my question?

    Howdy y'all,
    I'm trying to determine what we can do with our unused NW 5.1 distribution kit. Where should I post my question?
    Thanks much.

    iMac questions should be posted here:
    <http://discussions.apple.com/forum.jspa?forumID=1110>
    It should not need additional cooling. Is the internal fan running? You should feel airflow from the vents.
    Install the iStat widget, enable all its temperature readings, and post the temperature reading to the group above to ask if they are normal.
    <http://www.islayer.com/apps/istatpro/>

  • Why can I not post a question?

    I'm a registered Apple user (account, password, etc). I'd like to post a question about an iMac support stand but the system won't permit me to post. What's up?

    Leaving this open will defeat the timer...
    If intentional that composing NOT prevent timeout and editing WILL prevent timeout, it seems bass-ackwards to me.
    I would think that good UX design would make initial contact as easy as possible and dissuade languishing by the absent-minded only.
    I am not sure about the most trafficked forum though. I'll stipulate VERY Large. Microsoft has a massively bigger installed base and is notoriously buggy, from which I would deduce much more active a forum and server loads.
    From what I understand - and I know quite a bit about it - just being logged in and sitting idle on the client side has NO Load on the server. The server-side only responds to requests. It doesn't idle like a car motor - nor is it like an old-timey telephone switchboard. The server array does indeed have some limit to open sockets (number is, and must be, huge), but they are used for milliseconds (nano?) and then are available for new requests and responses.
    The LoginTimer is in a cookie expiration TimeStamp and is solely client-side computing. tt2 discovered the compose pane timeoutDefeater and I proved the details in CookieTESTing - from " Cannot post - User ' ' is banned from posting. | Apple Support Communities "
    highest regards
    ÇÇÇ

Maybe you are looking for