Post Installation Config Docs

Hi Gurus,
I have freshly installed a CRM 2007 server. But now i am in a real fix. I dont know what all are the confis that need to be done now, related to IPC, XCM and NWDI. If anyone can please help me in acquiring these related documents, i would be really thankful to them.
Thanking you in advance,
Regards,
Savan Kumar D.

Hello SAVAN,
You use SM53 for VMC administration. There are bunch of other transactions too. Here is the SAP Help link for [VMC Admin|http://help.sap.com/saphelp_crm60/helpdata/en/d7/b3d5a737924adab3d075cc34ee9718/content.htm].
Also, see these Notes for VMC activation and stuff like that.
[Note 854170 - Activating the component "VM Container"|https://service.sap.com/sap/support/notes/854170]
Also, little [more info on VMC|https://websmp207.sap-ag.de/~sapidb/012003146900000723802005E/vmc2004s_en.pdf] - very useful document is available as a PDF file in this link.
Hope this is very helpful.
Easwar Ram
http://www.parxlns.com

Similar Messages

Post installation config

Hi All,
We have just started with portal installation in one our client's place. I wud like to know wat would be the next step after installation. what kind of configuration will be needed for any company in general. The requirements for the portal project in that company has not been mentioned as yet.
thanks
chan

Hi chan,
Post Installation confugiration depends on what you requirements are. Till you have the requirements, you can go through the following useful docs:
Post-Installation Guide - SLD 6.40:
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/09cb9ffb-0701-0010-4183-c2e8f405bf9a">https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/09cb9ffb-0701-0010-4183-c2e8f405bf9a</a>
Post Installation Guide - SLD of SAP NetWeaver 2004s:
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/652b1f46-0a01-0010-25ae-e7cb07b55414">https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/652b1f46-0a01-0010-25ae-e7cb07b55414</a>
SAP Web AS 6.40 SR1 Java on Windows - MySQL MaxDB - Installation and Post Installation:
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/111827e6-0701-0010-54bd-e1ed4c761900">https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/111827e6-0701-0010-54bd-e1ed4c761900</a>
SAP Web AS 6.40 SR1 Java on Windows - MS SQL Server - Installation and Post Installation:
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/326707fb-0701-0010-b387-8da9af6c352d">https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/326707fb-0701-0010-b387-8da9af6c352d</a>
SAP Web Application Server 6.40 SR1 Java on Windows - Oracle - Installation and Post-Installation:
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ef5702e1-0701-0010-67ad-8fc2a0d6a284">https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ef5702e1-0701-0010-67ad-8fc2a0d6a284</a>
You can find loads of other useful docs by searching for the string post installation in the sdn library.
Bye
Ankur
Reward points if it helps!!

DCNM Post-installation config: SSL set-up


I am a novice at this software. I have two servers on different networks. The software is installed and is answering its URL from the network but recently, I was required to change the hostnames and obtain new SSL certs. The DCNM software is holding onto the older certs even though the new ones are installed to IIS. I am looking for a solution to reconfiguring the SSL to use the new certs for HTTPS. I got into the the Java Keytool thing and got REALLY turned around. DCNM uses Tomcat or IIS? Anyway, the old certs are still being used by the software. That has to change. 
 
Thanx in advance 
 
Jeffrey D. Fisher
Windows Server Engineer
US Strategic Command/J646
Offutt AFB, NE USA


Folks,
Hello. Thanks a lot for replying. I reboot OS and run the commands as below:
[ora11g@rac2 bin]$ ./srvctl config database -d racdb
Its output:
PRCD-1027 : Failed to retrieve database racdb
PRCR-1070 : Failed to check if resource ora.racdb.db is registered
Cannot communicate with crsd
[ora11g@rac2 bin]$ ./sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Fri Mar 9 15:28:59 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter user-name: SYS
Enter password: SYS
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYSTEM
Enter password: SYSTEM
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYSMAN
Enter password: SYSMAN
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
[ora11g@rac2 bin]$
As we see the outputs above for the 2 commands "srvctl" and "sqlplus", my questions are:
First, why cannot retrieve database racdb ?
Second, sqlplus is poped up. Why users SYS, SYSTEM, SYSMAN cannot log in ?
Third, does my RAC database installation have problems ?
Thanks.

Xi-post installation steps-(step no 7 in config-wizard)-Error

In the Pi Post Installation Config wizard.
Step no 7 results in error: ADD INSTALLED PRODUCT2
Log is:
Element 'SAPConfigLib.XIT.Unclassified.addInstalledProduct':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.XIT.Unclassified.addInstalledProduct':Error during executing Java Reflection:User credentials are invalid or user is denied access
Pls help.

Hi John,
Are you getting the same error in last line ?
Element 'SAPConfigLib.XIT.Unclassified.addInstalledProduct':Error during executing Java Reflection:User credentials are invalid or user is denied access
If you are getting the same error check if all your service users are not locked ....if you are facing different error in the last line just keep us posted the exact one
Regards,
Naveen
Edited by: chichilin on Oct 5, 2011 12:58 AM

Beehive post-Installation problem

Hi, I'm istalling Oracle Beehive 2.1.0.0 in a Oracle Linux 5.
First I installed Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production, then guided by I installed Oracle Beehive, I followed the post-installation procedures http://docs.oracle.com/cd/E16671_01/bh.200/e16641/what_you_need_to_know.htm#BIJGGFJH, in the first step (Oracle Beehive Database Post-Installation Procedures - http://docs.oracle.com/cd/E16671_01/bh.200/e16641/db_post.htm#BHAJIEID) I make correctly (at least) the first two steps, in the third one no error show but if I check configuration with the “list_bootstrap_configuration” command what I see is that the desired password is in the schema name field.
After this, I can only use some of the commands, for example with activate_configuration or list_ports I receive:
beectl: command failed. See the log file "/u01/app/beehive/product/2.0.1.0.0/beehive_1/beehive/logs/beectl/2012.06.15/beectl_shell_17_06_04+0300.txt" for more details.
Log says:
2012-06-15T15:27:30.528+03:00] [beehive] [WARNING] [] [commandline.OcsCtlException] [host: sergio.signum.com.tr] [nwaddr: 127.0.0.1] [tid: 10] [userId: oracle] [ecid: 127.0.0.1:24886:1339763249622:1,0] new-beectl-exception-instantiated-logging-automatically : (no-message-to-log)[[
oracle.ocs.commandline.BeeCtlException
at oracle.ocs.commandline.framework.ConfigurationManagerInitializer.initConfigManager(ConfigurationManagerInitializer.java:161)
at oracle.ocs.commandline.framework.ConfigurationManagerInitializer.initialize(ConfigurationManagerInitializer.java:138)
at oracle.ocs.commandline.framework.OcsCtlApplicationScope.initConfigurationManager(OcsCtlApplicationScope.java:448)
at oracle.ocs.commandline.framework.OcsCtlSession.initConfigurationManager(OcsCtlSession.java:498)
at oracle.ocs.commandline.sysmodel.ConfigurationManagerHelper.<init>(ConfigurationManagerHelper.java:101)
at oracle.ocs.commandline.sysmodel.ConfigurationManagerHelper.getInstance(ConfigurationManagerHelper.java:108)
at oracle.ocs.commandline.CommandEnv.getConfiguration(CommandEnv.java:570)
at oracle.ocs.commandline.framework.infracmds.ModifyBsp.execute(ModifyBsp.java:345)
at oracle.ocs.commandline.framework.LocalCommandExecutionEnv.execute(LocalCommandExecutionEnv.java:90)
at oracle.ocs.commandline.framework.ModeHandler.executeCommand(ModeHandler.java:525)
at oracle.ocs.commandline.framework.ShellModeHandler.executeCommandLocally(ShellModeHandler.java:205)
at oracle.ocs.commandline.framework.ShellModeHandler.access$300(ShellModeHandler.java:71)
at oracle.ocs.commandline.framework.ShellModeHandler$ProcessLine.processLine(ShellModeHandler.java:279)
at oracle.ocs.commandline.framework.ShellModeHandler$ProcessLine.access$100(ShellModeHandler.java:208)
at oracle.ocs.commandline.framework.ShellModeHandler.processCmd(ShellModeHandler.java:159)
at oracle.ocs.commandline.framework.OcsCtl.main(OcsCtl.java:174)
Caused by: oracle.ocs.core.store.exceptions.DataStoreProviderException: Unable to get Config DataSource
at oracle.ocs.framework.store.DataStoreAccessLocalFactory.getConfigDataSource(DataStoreAccessLocalFactory.java:564)
at oracle.ocs.commandline.framework.ConfigurationManagerInitializer.initConfigManager(ConfigurationManagerInitializer.java:159)
... 15 more
Caused by: java.sql.SQLException: MalConfiguration Exception.
at oracle.ocs.framework.store.OcsNonJndiBootstrapDataSource.<init>(OcsNonJndiBootstrapDataSource.java:137)
at oracle.ocs.framework.store.DataStoreAccessLocalFactory.getConfigDataSource(DataStoreAccessLocalFactory.java:561)
... 16 more
Caused by: oracle.ocs.core.store.exceptions.MalConfiguredDataStoreException: Unsupported Connect String: beehiveConn
at oracle.ocs.core.store.DbUtil.getServiceNameFromConnectString(DbUtil.java:479)
at oracle.ocs.framework.store.OcsNonJndiBootstrapDataSource.<init>(OcsNonJndiBootstrapDataSource.java:135)
... 17 more
Even if I try to clear the data given in previous steps with “clear_proposed_configuration” command I received the error.
I checked and there are 6 patches, but it seems none of them fix the problem, althought I couldn’t find from where to download. Also In the contents of the installation of Beehive, one point (out of the installation against database) it’s about installing Oracle Beekeaper, maybe that will help, but as far as I know it’s only a UI for Beehive.
(http://docs.oracle.com/cd/E16671_01/bh.200/e16649/beectl.htm#list_bootstrap_configuration here is the documentation about beectl)
Maybe the problem is that I'm installing in a 64 bits and documentation of Beehive says that only 32 bits is supported, but I needed to try because our client machine is a 64bit Linux .. any other suggestion?

for Instant Messaging, I believe you need to review Chapter 25 (Configuring XMPP) of the Installation Guide.
At least you need to do a
beectl modify_property --component _XmppService name DomainNames value <domain>
beectl activate_configuration
beectl restart --component BEEAPP_<instance>.<host>
For any user partaking in IM, you need to define an IM Address, as this is needed to provision the user to the XMPP Service.
If you master your user in an external directory, you can map existing mail addresses to also be used as IM Address, e.g.
<directory_attribute_map_entry>
<source_object>ENTERPRISE_USER</source_object>
<AttributeMap>
<Field>
<source_attribute>mail</source_attribute>
<target_attribute>BUSINESS</target_attribute>
<target_extended_attribute>IM</target_extended_attribute>
<target_attribute_type>ADDRESS</target_attribute_type>
</Field>
HTH, Thomas

Planning will not render post-installation

Installed Planning 11.1.2.3 in a distributed environment following the EPM_Standard_Deployment docs.
Post-installation, system diagnostics show everything working fine and all other products work correctly.
Assume Server A and B
Server A - Foundation, Planning installed but not config'd (per documentation)
Server B - Planning installed and config'd
When attempting to access Planning Administration via Workspace on Server A, I get a "website not found error".
When attempting to access Planning directly on Server B, I get re-routed to the following URL and nothing renders (servername redacted):
http://servername:8300/HyperionPlanning/faces/LogOn?_afrLoop=786018129329&_afrWindowMode=0&_adf.ctrl-state=oo6v2vjl8_4
In the HyS9Planning_epmsystem4-syserr.log, I get the following error:
HspRuntimeException: Registry: Error while retrieving System DB connection info from Registry
I can confirm that the config utility created the HSP tables in the Shared Services schema.
I have also dropped/recreated the HSP tables using the config utility to no avail.
I checked the JDBC connection info for Planning in the weblog admin console, and all looks well.
I've also tried to redeploy the Foundation web server, also to no avail.
Any ideas on where I might have gone wrong? Seems like a pretty obvious error message, but I would have thought that re-configuring Planning would resolve the issue?
Thank you in advance

Pablo,
Originally, I noticed the issue on the workspace server (during my post-installation testing) using the default URL for workspace:
http://server:19000/workspace/index.jsp
This results in a "website cannot be found error" in body of the page.
When that did not work, I decided to try and access Planning directly via the default Planning URL on the Planning server:
http://server:8300/HyperionPlanning/
Immediately once the browser receives a response from http://serverB:8300/HyperionPlanning, the URL changes to:
http://servername:8300/HyperionPlanning/faces/LogOn?_afrLoop=786018129329&_afrWindowMode=0&_adf.ctrl-state=oo6v2vjl8_4
This, along with the HSP error message about repository credentials leads me to believe that it is unrelated to OHS. Also, I can confirm entries for Planning the OHS file you provided above.

My post installation script

#I hope its the right forum to post that in, if not im very sorry!
This here is a script i wrote to automate all the stuff i do after installing arch, i have several computers and it has options for a additional one
Some important points:
1) this script is very specific, its made for my computer and my needs, this means that its useful right now only to people who know bash
and will find use in altering it to their own needs, also if someone wants he can make it more general for a wider use
2) this is one of the first scripts i wrote, it may be that it doesn't implent some of its features in the best way possible
3) use it at your own risk, if it breaks your system don't blame me please, you should check it before you use it, anyway its meant to be used
on a FRESH arch install, not on a working system.
What the correct script actually does:
The script as stated in the comments does the next things:
1) First of all it consists of several files, one the "install" file is the actual script, the others are just meant to run the script and split its output to
show both on the terminal and in a file named: /var/log/MySysInstall.log, here is an example of main.install:
#!/bin/bash
./install Main | tee /var/log/MySysInstall.log
in the current script Main in the last row can be replaces with Laptop, Game for computer specific arguments or without argumets for a general install
the two files should be in the same folder, i think it could have been implented with one file but im new to scripting..
2) The script will ask some general questions to make sure everything is currect, some of the questions and checks in the script are not relevant at all
to anybody other than myself, they usually make sure that i have a samba shared partition running (it could lose connection on wireless).
3) Adds the archlinux.fr repo, it will be used for yaourt.
4) The script installs lots of stuff, at first general stuff used by all computers in my house, then stuff based on the argument given in 1)
please inspect the packages and change according to your needs
5) The script nano's to /etc/yaourtrc
6) Adds users to the system, change to your users.
7) It creates my /home/samba share dir if its not created (probably irrelevant to you)
8) Configures sudo in a nasty way that maybe can damage the sudoers file, delete this line if you dodnt know sudo well enough.
9) Edits samba if needed, this is the first line in the script that relies on additional files i have on my comp or the samba share (main and game are the same
comp (dual boot of arch32 and 64) and they are the hosts of /home/samba all the other computers will mount it from them, this is why a samba check is not
present here.).
10) Adds some commented lines to fstab and nano's it for easier configurations, this is the regular workflow in the script BTW (adding comments to the file
before editing it)
11) Helps edit the gpm daemon
12) Helps to configure alsa
13) Helps to configure xorg
14) Does some post install copies of files AND creates a file in my main users home with further instructions, mostly for stuff that needs to be done with xorg runnig
or stuff i was to lasy to add to the script
15) chowns and sets my regular permissions for user folders
16) ends the script
The script itself, ENJOY:
#!/bin/bash
# Copyright 2008 Leon Vayman
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# A copy of the GNU General Public License is found in
# <http://www.gnu.org/licenses/>.
#Check that the user updated the kernel and restarted before proceeding
while [ 1 ] ; do
echo ; clear
echo -n "Have you already used pacman -Syu and Restarted? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
break
[Nn])
echo "Then do it now.."
exit
esac
done
#Check if samba is accesible and warn the user if its not (offering to quit)
if [ ! -e /home/samba/Config/ ] ; then
while [ 1 ] ; do
echo ; clear
echo -n "Samba is not accesible, do you want to proceed? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
break
[Nn])
exit
esac
done
fi
#Make sure the app wasnt ran accidently with wrong arguments
while [ 1 ] ; do
echo ; clear
echo -n "The comp you are on is $1 is that correct? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
break
[Nn])
exit
esac
done
#Edit /etc/pacman.conf
echo ; clear
echo >> /etc/pacman.conf
echo "[archlinuxfr]" >> /etc/pacman.conf
if [ "$1" = "Game" ] ; then
echo "Server = http://repo.archlinux.fr/x86_64" >> /etc/pacman.conf
else
echo "Server = http://repo.archlinux.fr/i686" >> /etc/pacman.conf
fi
echo -n "Make sure the right archlinux.fr repo was added "
read n1
nano /etc/pacman.conf
echo ; clear
#Install all packages
echo "Installing packages"
pacman -Syu
pacman -S yaourt
pacman -S xorg
pacman -S gstreamer0.10-plugins
yaourt -S abiword alsa-lib alsa-utils alsa-oss bash-completion cabextract centerim conky exaile hal epdfview feh freetype2 gamin gconf-editor geany gksu gmrun gnome-icon-theme gpicview \
gtk-engines zip irssi jre links-g libdvdcss tcl lxappearance lxpanel lxde-common lxrandr lxtask mesa moc mousepad mplayer-plugin numlockx openbox obconf obmenu openbox-themes \
p7zip pcmanfm pidgin pm-utils powertop screen terminal ttf-bitstream-vera ttf-dejavu ttf-freefont ttf-ms-fonts unace unrar unzip xarchiver xchat xmahjongg
yaourt -S stjerm
case "$1" in
"Laptop")
yaourt -S vlc keytouch keytouch-editor xf86-video-i810 synaptics cpufrequtils flashplugin
yaourt -S swiftweasel-pentium-3
yaourt -S wpa_supplicant-beta
yaourt -S xcompmgr-git
"Main")
yaourt -S flashplugin cpufrequtils epiphany catalyst deluge amule xmoto abs samba
yaourt -S icecat
yaourt -S xcompmgr-git
yaourt -S ekiga3
yaourt -S ov51x-jpeg
yaourt -S vlc-branch
yaourt -S brasero-no-gnome
"Game")
yaourt -S epiphany catalyst deluge amule xmoto abs samba ##!! add gnash or swfdec
yaourt -S icecat
yaourt -S ekiga3
yaourt -S ov51x-jpeg
yaourt -S vlc-branch
yaourt -S brasero-no-gnome
echo -n "No extra packages installed "
esac
echo -n "Press Enter to continue "
read n1
echo ; clear
#Configure yaourt.rc
echo -n "Replace the editor in yaourtrc "
read n1
nano /etc/yaourtrc
echo ; clear
#Add users
echo "Adding User vleon"
useradd -d /home/vleon -g users -G disk,wheel,games,video,audio,optical,storage,power,dbus,hal,avahi,log -m vleon
echo "Set vleon's password"
passwd vleon
echo ; clear
echo "Adding User masha"
useradd -d /home/masha -g users -G disk,wheel,games,video,audio,optical,storage,power,dbus,hal,avahi,log -m masha
echo "Set masha's password"
passwd masha
echo ; clear
#If for some reason samba dir doesnt exist, create it
if [ ! -e /home/samba ] ; then
mkdir /home/samba
chown vleon:users /home/samba
chmod 770 /home/samba
fi
#Configure visudo
echo -n "uncomment wheel in visudo and make sure the added lines are correct "
read n1
echo "#%power ALL=(ALL) NOPASSWD: /usr/sbin/pm-hibernate" >> /etc/sudoers
echo "#%power ALL=(ALL) NOPASSWD: /sbin/shutdown" >> /etc/sudoers
visudo
echo ; clear
#Edit samba if needed
if ( [ "$1" = "Main" ] || [ "$1" = "Game" ] ) ; then
echo -n "Edit swat "
read n1
cp /home/samba/Config/etc/xinetd.d/swat /etc/xinetd.d/swat
nano /etc/xinetd.d/swat
echo ; clear
echo -n "Edit Hosts "
read n1
cp /home/samba/Config/etc/hosts.allow /etc/hosts.allow
nano /etc/hosts.allow
echo ; clear
echo -n "Edit smb.conf "
read n1
cp /home/samba/Config/etc/samba/smb.conf /etc/samba/smb.conf
nano /etc/samba/smb.conf
echo ; clear
echo "Set vleon's samba password"
smbpasswd -a vleon
echo ; clear
echo -n "Add samba and xinetd daemon to rc.conf "
read n1
nano /etc/rc.conf
echo ; clear
fi
#Edit fstab
echo -n "Edit fstab "
read n1
echo >> /etc/fstab
if [ "$1" != "Laptop" ] ; then
echo "#UUID=92D8DA69D8DA4ADD /mnt/windows ntfs-3g defaults,noatime 0 0" >> /etc/fstab
if ( [ "$1" != "Main" ] && [ "$1" != "Game" ] ) ; then
echo "#UUID=0E15-1D06 /mnt/windows vfat defaults,noatime,umask=0000 0 0" >> /etc/fstab
echo "#//192.168.1.100/samba /home/samba cifs defaults,noatime,noauto,user=vleon%pass 0 0" >> /etc/fstab
echo "##change the above password!!" >> /etc/fstab
fi
nano /etc/fstab
echo ; clear
else
echo "#UUID=0E15-1D06 /mnt/windows vfat defaults,noatime,umask=0000 0 0" >> /etc/fstab
echo "#//192.168.1.100/samba /home/samba cifs defaults,noatime,noauto,user=vleon%pass 0 0" >> /etc/fstab
echo "##change the above password!!" >> /etc/fstab
nano /etc/fstab
echo ; clear
fi
#Edit gpm
echo -n "Edit gpm "
read n1
echo "#GPM_ARGS=\"-m /dev/input/mice -t imps2\"" >> /etc/conf.d/gpm
nano /etc/conf.d/gpm
echo ; clear
echo -n "Add gpm daemon to rc.conf "
read n1
nano /etc/rc.conf
echo ; clear
#Configure alsa
Alsa Config
test=1
echo -n "Edit alsamixer "
read n1
while [ "$test" = 1 ] ; do
alsamixer -V all
echo "Testing Sound"
aplay /usr/share/sounds/alsa/Noise.wav
while [ 1 ] ; do
echo ; clear
echo -n "Did You Hear Any Sound? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
test=0
break
[Nn])
break
esac
done
done
alsactl store
echo -n "Add alsa to daemons "
read n1
nano /etc/rc.conf
echo ; clear
#Configure Xorg
if [ -e /home/samba/Config/etc/X11/ ] ; then
echo -n "Edit xorg.conf "
read n1
if ( [ "$1" = "Laptop" ] ) ; then
cp /home/samba/Config/etc/X11/laptop.xorg.conf /etc/X11/xorg.conf
else
cp /home/samba/Config/etc/X11/main.xorg.conf /etc/X11/xorg.conf
fi
nano /etc/X11/xorg.conf
echo ; clear
echo -n "add \"ru\" to xorg.conf.mom "
read n1
cp etc/X11/xorg.conf etc/X11/xorg.conf.mom
nano /etc/X11/xorg.conf.mom
echo ; clear
else
echo -n "No samba connection found, manually editing xorg.conf "
read n1
X -configure
mv /root/xorg.conf.new /etc/X11/xorg.conf
echo >> /etc/X11/xorg.conf
echo "# Option \"XkbLayout\" \"us,il\"" >> /etc/X11/xorg.conf
echo "# Option \"XkbOptions\" \"grp:alt_shift_toggle,grp_led:scroll\"" >> /etc/X11/xorg.conf
echo "# DefaultDepth 24" >> /etc/X11/xorg.conf
echo "# Modes \"1680x1050\" \"1280x1024\" \"1024x768\" \"800x600\"" >> /etc/X11/xorg.conf
if [ "$1" = "Laptop" ] ; then
echo >> /etc/X11/xorg.conf
echo "#Section \"InputDevice\"" >> /etc/X11/xorg.conf
echo "# Identifier \"Touchpad\"" >> /etc/X11/xorg.conf
echo "# Driver \"synaptics\"" >> /etc/X11/xorg.conf
echo "# Option \"Device\" \"/dev/input/mouse0\"" >> /etc/X11/xorg.conf
echo "# Option \"Protocol\" \"auto-dev\"" >> /etc/X11/xorg.conf
echo "# Option \"LeftEdge\" \"1700\"" >> /etc/X11/xorg.conf
echo "# Option \"RightEdge\" \"5300\"" >> /etc/X11/xorg.conf
echo "# Option \"TopEdge\" \"1700\"" >> /etc/X11/xorg.conf
echo "# Option \"BottomEdge\" \"4200\"" >> /etc/X11/xorg.conf
echo "# Option \"FingerLow\" \"25\"" >> /etc/X11/xorg.conf
echo "# Option \"FingerHigh\" \"30\"" >> /etc/X11/xorg.conf
echo "# Option \"FingerPress\" \"100\"" >> /etc/X11/xorg.conf
echo "# Option \"MaxTapTime\" \"180\"" >> /etc/X11/xorg.conf
echo "# Option \"MaxTapMove\" \"220\"" >> /etc/X11/xorg.conf
echo "# Option \"VertScrollDelta\" \"100\"" >> /etc/X11/xorg.conf
echo "# Option \"MinSpeed\" \"0.06\"" >> /etc/X11/xorg.conf
echo "# Option \"MaxSpeed\" \"0.12\"" >> /etc/X11/xorg.conf
echo "# Option \"AccelFactor\" \"0.0010\"" >> /etc/X11/xorg.conf
echo "# Option \"SHMConfig\" \"on\"" >> /etc/X11/xorg.conf
echo "#EndSection" >> /etc/X11/xorg.conf
fi
echo -n "Edit xorg.conf "
read n1
nano /etc/X11/xorg.conf
echo ; clear
echo -n "add \"ru\" to xorg.conf.mom "
read n1
cp etc/X11/xorg.conf etc/X11/xorg.conf.mom
nano /etc/X11/xorg.conf.mom
echo ; clear
fi
#Start the post install document and copy files to homes if able and need to
echo "Post Installation Instructions" > /home/vleon/PostInstall.txt
echo "------------------------------" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "Usage: Follow the instructions and delete the lines that are not relevant anymore. you can delete" >> /home/vleon/PostInstall.txt
echo " this file after you finished." >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "-------------------------------------------------------------------------------------------------" >> /home/vleon/PostInstall.txt
if [ ! -e /home/vleon/.config] ; then
if [ -e /home/samba/Config/ ] ; then
cp /home/samba/Config/.bash_profile /home/vleon/ ; cp /home/samba/Config/.bash_profile /home/masha/
cp /home/samba/Config/.bashrc /home/vleon/ ; cp /home/samba/Config/.bashrc /home/masha/
cp /home/samba/Config/.xinitrc /home/vleon/ ; cp /home/samba/Config/.xinitrc /home/masha/
cp /home/samba/Config/.xserverrc /home/masha/
mkdir -p /home/vleon/.config/openbox ; mkdir -p /home/masha/.config/openbox
cp /home/samba/Config/.config/openbox/rc.xml /home/vleon/.config/openbox/ ; cp /home/samba/Config/.config/openbox/rc.xml /home/masha/.config/openbox/
if [ "$1" = "Laptop" ] ; then
cp /home/samba/Config/.conkyrc.laptop /home/vleon/.conkyrc ; cp /home/samba/Config/.conkyrc.laptop /home/masha/.conkyrc
cp /home/samba/Config/.Xdefaults.laptop /home/vleon/.Xdefaults ; cp /home/samba/Config/.Xdefaults.laptop /home/masha/.Xdefaults
cp /home/samba/Config/.config/openbox/menu.xml.laptop /home/vleon/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/menu.xml.laptop /home/masha/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/autostart.sh.laptop /home/vleon/.config/openbox/autostart.sh
cp /home/samba/Config/.config/openbox/autostart.sh.laptop /home/masha/.config/openbox/autostart.sh
else
if ( [ "$1" != "Main" ] && [ "$1" != "Game" ] )
cp /home/samba/Config/.conkyrc.laptop /home/vleon/.conkyrc ; cp /home/samba/Config/.conkyrc.laptop /home/masha/.conkyrc
else
cp /home/samba/Config/.conkyrc.main /home/vleon/.conkyrc ; cp /home/samba/Config/.conkyrc.main /home/masha/.conkyrc
fi
cp /home/samba/Config/.Xdefaults.main /home/vleon/.Xdefaults ; cp /home/samba/Config/.Xdefaults.main /home/masha/.Xdefaults
cp /home/samba/Config/.config/openbox/menu.xml.main /home/vleon/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/menu.xml.main /home/masha/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/autostart.sh.main /home/vleon/.config/openbox/autostart.sh
cp /home/samba/Config/.config/openbox/autostart.sh.main /home/masha/.config/openbox/autostart.sh
fi
else
echo >> /home/vleon/PostInstall.txt
echo "!!Samba is not availble, you will have to create the following files yourself!!" >> /home/vleon/PostInstall.txt
fi
echo >> /home/vleon/PostInstall.txt
echo "The folowing files where probably created in your home folders:" >> /home/vleon/PostInstall.txt
echo ".bash_profile" >> /home/vleon/PostInstall.txt
echo ".bashrc" >> /home/vleon/PostInstall.txt
echo ".conkyrc" >> /home/vleon/PostInstall.txt
echo ".Xdefaults" >> /home/vleon/PostInstall.txt
echo ".xinitrc" >> /home/vleon/PostInstall.txt
echo ".xserverrc #<< only to /home/masha" >> /home/vleon/PostInstall.txt
echo ".config/openbox/autostart.sh" >> /home/vleon/PostInstall.txt
echo ".config/openbox/menu.xml" >> /home/vleon/PostInstall.txt
echo ".config/openbox/rc.xml" >> /home/vleon/PostInstall.txt
echo "!!Make sure the above files created and are configured properly!!" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "Configuration Guidelines:" >> /home/vleon/PostInstall.txt
echo "1) make sure width and hight are correct .Xdefaults" >> /home/vleon/PostInstall.txt
echo "2) make sure to comment the \"xcompmgr\" line in autostart.sh, to fit the Computer and User" >> /home/vleon/PostInstall.txt
echo "3) use obmenu and obconf later to tune up stuff" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "-------------------------------------------------------------------------------------------------" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "rc.conf Guidelines:" >> /home/vleon/PostInstall.txt
echo "1) possible modules are: powernow-k8 or acpi-cpufreq, cpufreq_ondemand, ov51x-jpeg, fglrx" >> /home/vleon/PostInstall.txt
echo "2) possible daemons are: hal, cpufreq, acpid [laptop], netfs, keytouch" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "-------------------------------------------------------------------------------------------------" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "General Guidelines:" >> /home/vleon/PostInstall.txt
echo "1) copy or compare the files from /home/samba/Config/etc to /etc" >> /home/vleon/PostInstall.txt
echo "2) on the laptop, dont forget to add the additional scripts needed from the /home/samba/Config/, dont forget to backup replaced files" >> /home/vleon/PostInstall.txt
echo "3) add resume=/dev/sda3 to /boot/grub/menu.lst if its not there already" >> /home/vleon/PostInstall.txt
echo "4) dont Forget to configure gksu after launching X" >> /home/vleon/PostInstall.txt
echo "5) lauch and configure all the apps in the menu and the cmdline apps links -g, mocp, irssi, centerim" >> /home/vleon/PostInstall.txt
echo "6) test logout, reboot, shutdown and hibernate" >> /home/vleon/PostInstall.txt
echo "7) configure keytouch on the laptop" >> /home/vleon/PostInstall.txt
echo "8) if it doesnt exist mkdir ~/.Theme for both users and add a jpg picture named theme.jpg to be the wallpaper" >> /home/vleon/PostInstall.txt
echo "9) read /var/log/MySysInstall.log and make sure all was succesfull especialy AUR install's like icecat or iceweasel" >> /home/vleon/PostInstall.txt
echo "10) run lxappearance, configure lxpanel, configure terminal" >> /home/vleon/PostInstall.txt
echo "11) run powertop after you restart again with all the modules and daemons and other stuff configured" >> /home/vleon/PostInstall.txt
#Return ownership to the approtiate users
chown -R vleon:users /home/vleon ; chown -R masha:users /home/masha
chmod /home/vleon 750 ; chmod /home/masha 750
chmod /home/vleon/.config 750 ; chmod /home/masha/config 750
chmod /home/vleon/.config/openbox 750 ; chmod /home/vleon/.config/openbox 750
#End
echo "Install Finished, please additional instructions where created in /home/vleon/PostInstall.txt"
read n1
exit

luckystar09 - I'd say you're on your own there. This thread is nearly a year old, and Black Mage hasn't posted here since. Read the script, and modify it yourself as required.
Forum rule - do not post in threads that have been inactive for six months of more. See here for full details.
Closed.

PI 7.0 Post Installation

Hi All,
I am facing diffuculty while doing the Post-installation activities for XI. I don't have the passwords for the Service Users like PILDUSER, PIAPPLUSER, SAPJSF etc.,. When I try to reset/change the password in the User Management Section, I am getting the following error message "An error occurred in the persistence; contact your system administrator". Pls suggest as to what can be done.
Regards,
Divya.

Hi,
Please see the below links
Post Installation steps for activating Adobe Document Services in SAP XI NW 2004S
-/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
Link for posnt installation guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
2004s PI installation - help.sap.com:
http://help.sap.com/saphelp_nw04s/helpdata/en/78/f59442062bcd6ae10000000a155106/frameset.htm
Regards
Chilla

Problem during Post Installation in PI 7.1

Dear All,
While doing post installation steps in PI 7.1 Server all the configurations are taking place in client 001 though we have done the client copy from 001 to 200. All the user id etc are getting created in client 001 only. I have changed the client id in RFC "I18NBackendConnection" and "UMEBackendConnection" in http://<host>:<hport>/nwa then also its taking 001 client only.
Please guide me on how to do the configurations so that everything is done in 200 client.
Regards,
NJ

Nishu,
AYou could have resolved this isuue by running the client copy (SAP note - 1115280) before running the config wizard.
You have rerun the
client copy step - follow the SAP note 1115280 as is.
and you will be fine... I think you may have to manually change the clients in the Java stack - Jco connection and RFC destination.
regards,
Arvind R

Post Installation Checklist: AC GRC 10

Hello All,
We have been told by the Basis team that the GRC PRD is ready for use after they have installed it. Just wanted to know if there is any post installation guide or document that we can refer to, to make sure we have the complete installation and settings before we go for the configuration and import of transports from DEV/QAS. An example of things to check can be:
1. If the NWBC is working fine.
2. If all the Connectors are created properly.
3. If all the relevant BC sets are activated.
We need this information to make a check that when the Basis team hands over the PRD server for us to use, we do not miss out checking anything that can have an adverse affect later when we import our configs and data from DEV or QAS.
Thanks and look forward to hear soon.

Hi,
You can get more ideas about the same from the installation guide where you can have a look to see which are the important areas that you need to focus on. Broadly, these are:
SP Levels for the key components.
SICF services
BC sets.
Hope that helps.
Regards,
Hersh.

Problem in XI after post installation.

I have done the post installation for PI, everything was fine and sucessfull,
but the problem is, in XI check list there is no objects found in the Integration Repository and Integration Directory with the URL ( http:
emsap008:50100\rep\start\index.asp ).
Let me explain the problem which i faced.
In the transaction SXMB_IFR --> Tool --> Import Design Objects Option, the result displaied is " There is no Objects found ". But as per the document i need to get " PI7_0_BASIS_6.40_18_00.tpz ".
Please clarify my doubt, ask me if my question is insuffecient.

Hi Senthil !!
Here is the guide with necessary steps
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
You will get the details of post installation activities for SAP XI in its installation guides itself. Have a look:
SAP Exchange Infrastructure Release 3.0 - Installation Guide
SAP Exchange Infrastructure 3.0 SR1 - Installation Guide
Plus you can go through the following docs:
SAP Exchange Infrastructure (XI) 3.0
Troubleshooting Guide - SAP XI 3.0 and 2.0
SAP XI Release 3.0 SPS11Configuration Guide
Also you can have a look at the following thread, you will get some links in these threads too:
Post installation of XI?
XI INSTALLATION and POSTINSTALLATION
XI Post Installation....Need help...
XI Post Installation - Help
XI Post Installation - SLD Connection
refre this thread
Post Installation of PI - PI template Installer not found
Pls rewards if useful

Oracle Post Installation Semaphore Parameters

SYS INFO: Oracle 11g R2 SUSE Linux 11.
The Oracle posting installation guide requires to set the Semaphore Parameters. Here are the steps:
Calculate the minimum total semaphore requirements using the following formula:
sum (process parameters of all database instances on the system) + overhead for background processes + system and other application requirements
How can I determine (where can I find) the process parameters, overhead for background processes and system and other application requirements?
Thanks

Do you have any special requirements or needs for your database ? If not, the recommended value of 32000 (http://docs.oracle.com/cd/E11882_01/install.112/e24321/pre_install.htm#CIHEGJEH) should suffice.
HTH
Srini

PI (XI 7.0) Installation and Post Installation Guides

We have installed XI 3.0 with previous clients, and we are trying to install XI 7.0 (PI) for a client on Windows 2003 SQL server. We looked for installation documents in the service.sap.com, but we were confused about which documents to follow.
Has anyone installed PI (XI 7.0) from scratch? If yes, could you provide us documents regarding installation and post installation steps. What are the differences in installing XI 3.0 and PI?
You help is greatly appreciated.
Cheers,
Karma

Hey Karma,
You dont need any guide for PI post installation.
There is a facility in NW 2004s for completing post installation, they provide with templates. you just have to execute the templates and your PI post config is done.
first execute
NWD
and then
PI templates
After this import the BASIS components into design environment.
Regards
Ramesh P

Post installation for XI

Hi All,
I have installed ECC 6.0. I have added XI component also. Now i need to perform post installation steps for XI alone. i have downloaded the NW7 installation Guide MAXDB. is that enough? or should i need more documents....
Also, i found out a document for post installation guide system landscape directory of SAP Netweaver 7.0....
Which one should i follow?
Please clarify....
Thanks in advance,
Madhukar

Hi madhukar !!
Is this what you are looking for:
https://websmp103.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Also check this thread..
Re: XI INSTALLATION and POSTINSTALLATION
those describe din XI installation and configuration guides:
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
check this thread for SLD configuration soon after XI installation
SLD configuration
Check this link also it has the procedure.
http://help.sap.com/saphelp_nw2004s/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
Here is the guide with necessary steps
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
You will get the details of post installation activities for SAP XI in its installation guides itself. Have a look:
SAP Exchange Infrastructure Release 3.0 - Installation Guide
SAP Exchange Infrastructure 3.0 SR1 - Installation Guide
Plus you can go through the following docs:
SAP Exchange Infrastructure (XI) 3.0
Troubleshooting Guide - SAP XI 3.0 and 2.0
SAP XI Release 3.0 SPS11Configuration Guide
Also you can have a look at the following thread, you will get some links in these threads too:
Post installation of XI?
XI INSTALLATION and POSTINSTALLATION
XI Post Installation....Need help...
XI Post Installation - Help
XI Post Installation - SLD Connection
Post Installation of PI - PI template Installer not found
Pls reward if useful

Need Post installation configuration guide for PI 7.0

Hi,
Does anybody have Post installation configuration guide for PI 7.0 ?
Our basis team has installed PI 7.0.
Now we need to do the post installation.
Do we need to do all configuration steps we use to do for XI 3.0 or is it different in PI 7.0.
Your help appreciated.
Thanks,
Vinod

HI,
See the below links
Post Installation steps for activating Adobe Document Services in SAP XI NW 2004S
-/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
Link for posnt installation guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
Regards
Chilla

Post Installation Config Docs

Similar Messages

Maybe you are looking for