Post Installation/Configuration Procedures

Hi,
I installed Grid for Clustering (11.2.0.2) and RAC (11.2.0.2) on the AIX platform.
How do I know if the installation and setup of my environment is OK.
Such as:
* Best practices
* Parameters
* Patch
* Database configuration
* ASM configuration
and so on.
The question is: There is a way to check this?
Thanks.

Hi,
I installed Grid for Clustering (11.2.0.2) and RAC (11.2.0.2) on the AIX platform.
How do I know if the installation and setup of my environment is OK.
Such as:
* Best practices
* Parameters
* Patch
* Database configuration
* ASM configuration
and so on.
The question is: There is a way to check this?Yes ... RACcheck do it. I always use this tool after finish all work.
RACcheck is a RAC Configuration Audit tool designed to audit various important configuration settings within a Real Application Clusters (RAC), Oracle Clusterware (CRS), Automatic Storage Management (ASM) and Grid Infrastructure environment. The tool audits configuration settings within the following categories:
<li>OS kernel parameters
<li>OS packages
<li>Many other OS configuration settings important to RAC.
<li>CRS/Grid Infrastructure
<li>RDBMS
<li>ASM
<li>Database parameters
<li>Many other database configuration settings important to RAC.
Upon completion, you will see a nice HTML report.
Caution
The RACcheck is provided for educational purposes only and not supported by Oracle Support Services. It has been tested internally, however, and works as documented. Oracle do not guarantee that it will work for you, so be sure to test it in your environment before relying on it.
RACcheck - RAC Configuration Audit Tool [ID 1268927.1]
Regards,
Levi Pereira

Similar Messages

  • Need Post installation configuration guide for PI 7.0

    Hi,
    Does anybody have Post installation configuration guide for PI 7.0 ?
    Our basis team has installed PI 7.0.
    Now we need to do the post installation.
    Do we need to do all configuration steps we use to do for XI 3.0 or is it different in PI 7.0.
    Your help appreciated.
    Thanks,
    Vinod

    HI,
    See the below links
    Post Installation steps for activating Adobe Document Services in SAP XI NW 2004S
    -/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
    Link for posnt installation guide
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
    https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
    Regards
    Chilla

  • Do i need the POST-INSTALLATION configuration for linux+oracle?

    hello
    i install the oracle10g on redhat9 box,JUST finish the installation,i open the Terminal windows,type ¨sqlplus¨ command,linux tell me ¨commnd not found¨. i guest the installer don´t set the env variable(in windows operating system,the installer automatically set the path variable during the install procedure).
    i can SUCCESSFULLY access the browser console of em and isqlplus.
    but after i restart the redhat,the browser can´t access both
    em and isqlplus(connection reset).when i telnet the 5500 and 5560 port,i found that they haven´t be open.and i suspect that the oracle database haven´t been automatically started.
    question 1:how can i MANUALLY start oracle after i restart the linux?
    question 2:how can i config the oracle after the install to make it work perminently?or post-install configuration.
    thank you very much!

    Oracle will not start automatically. You have to enter as oracle user and start the listener manually and then the database .
    Command are like : lsnrctl start
    Then , type svrmgrl ( the server manager console ) , connect internal , and then startup .
    Later on you can write scripts for automatic startup of the database and listener .
    G J Shankar Nath
    Deputy System Manager
    GNRC Limited

  • SLD port problem in Netweaver XI post installation configuration steps

    Hi All,
        Recently we changed the port number of the SAP server to 80.Every thing working fine.
    When ever we are configuring the XI that mean the post installation steps for Exchange Infrastructure it giving the errors in machine_technical_configuration  step.
    Error Message is:
    Element 'SAPConfigLib.NW5.Unclassified.addInstalledProduct':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
    -:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
    -:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
    -:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
    -:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
    Element 'SAPConfigLib.NW5.Unclassified.addInstalledProduct':Error during executing Java Reflection:IO error: Unable to open connection to host "mmsr18:50000". The host is down or unavailable..
    Is there any solution to solve this....
    Thanks & Regards,
    Vivek.

    hi
    check if the new port(80) is maintained in tcode- sldapicust
    Thx
    jonu

  • On XI - Post Installation & Configuration

    Dear XI Gurus,
    I am working on a simple file to file scenario to ckeck if my installation and post installation are successful.
    I completed all my design work in the repository successfully.When i move to the configuration in integration directory and when in try to assign a business system i get the error mentioned below.
    I'm assuming this to be a post insallation issue.Can you pls help me on this issue.
    Unable to find an associated SLD element(source element:SAP_XIIntegrationServer,[CreationClassName,SAP_XIIntegrationServer,string,Name,is.00.<hostname>,string],target element type:SAP_BusinessSystem)

    Hi Ratnakar,
    Check these..
    Unable to find an associated SLD element
    Unable to find an associated SLD element
    XI Integration directory during channel creation
    Problem with generating Sender Agreements
    Transport problem
    cheers,
    Prashanth
    P.S Please mark helpful answers

  • Post Installation Configurations for WAS640

    Hello All,
    We have installed Sneak preview of WAS640.We have also installed SAP on the same system.
    What do we need to do as part of post installation activities for accessing the data from our SAP system.
    We have also developed a dynpro application in which we would like to fetch the data from SAP and then displaying the data on the User Interface.
    We are unable to fetch the data from the SAP system.
    What steps needs to be carried out to fetch the data from SAP?
    Do we require Exchange infrastructure for the same.
    Also can anybody please tell me when would the full fledged version of WAS640 be available?
    Pradeep

    > Hello All,
    > We have installed Sneak preview of WAS640.We have
    > also installed SAP on the same system.
    Since all of this is from SAP, i guess you mean an ABAP system.
    >
    > What do we need to do as part of post installation
    > activities for accessing the data from our SAP
    > system.
    Some mandatory activities to access an ABAP system from Web Dynpro are documented at this tutorial: https://www.sdn.sap.com/sdn/developerareas/webdynpro.sdn?page=TutWD5_BAPI.htm
    >
    > We have also developed a dynpro application in which
    > we would like to fetch the data from SAP and then
    > displaying the data on the User Interface.
    >
    > We are unable to fetch the data from the SAP system.
    >
    >
    > What steps needs to be carried out to fetch the data
    > from SAP?
    If you mean a Web Dynpro application, the tutorial might be helpful.
    >
    > Do we require Exchange infrastructure for the same.
    No. Not on this "level".
    >
    > Also can anybody please tell me when would the full
    > fledged version of WAS640 be available?
    >
    Synchronized NetWeaver '04 rollout (AFAIK) is October 2004. This includes the (first) production version of the WAS 6.40.
    > Pradeep
    Regards
    Stefan

  • Post-installation configuration interface not running

    I've just installed Ops Center 12.1 on a new SPARC T4-1b running Solaris 11.
    We are using a remote database hosted inside an Oracle Database Appliance. The installation went through entirely, and I'm at the point where I need to configure the application.
    The problem is that the web GUI that is supposed to be running on port 9443 isn't running. (doesn't appear in netstat -an).
    The instances bound to port 80 (the redirect) and port 443 exist -- but the rewrite sends me to the non-existent service running on port 9443, so I am stuck.
    root@host:/opt/SUNWxvmoc/bin# ./ecadm status
    online
    OCDoctor reports no issues.
    root@host:/opt/SUNWxvmoc/bin# /var/opt/sun/xvm/OCDoctor/OCDoctor.sh --troubleshoot
    Ops Center Doctor 4.05 [OC 12.1.1.2076,SunOS11] [Read only] [21-Aug-2012 14:46PM EDT]
    ======================== Checking Enterprise Controller... ==============================
    OK: Total number of agents: 0
    OK: Number of agents with inventories: 0
    OK: Memory is (65024), ZFS is used and zfs_arc_max is set to 8589934592 in /etc/system
    OK: /etc/netboot folder exists
    OK: User 'uce-sds' home folder points to the right location
    OK: User 'oracleoc' home folder points to the right location
    OK: User 'allstart' home folder points to the right location
    OK: Apache logs are smaller than 2 GB
    OK: n1gc folder has the right permissions
    OK: All Enterprise Controller packages are installed properly
    OK: All agent packages are installed properly
    OK: Enterprise Controller status is online
    OK: the version is the latest one (12.1.1.2076)
    OK: satadm timeouts were increased
    OK: tar command was properly adjusted in satadm
    OK: Found the server .uce.rc
    OK: Server .uce.rc has the correct file permissions
    OK: Server .uce.rc has the correct ownership
    OK: Connectivity to the KB public servers works properly
    OK: Grouplock file doesn't exist
    OK: Locales are OK ("C")
    OK: No partially installed packages
    OK: No old jobs rerun (CR 6990675)
    OK: No NCP encryption is used
    OK: No credential issues foundWhere is this instance
    =========== Proxy controller is installed but not configured, skipping ==================
    =========== Agent controller is installed but not configured, skipping ==================
    How can I start this instance on port 9443 so I can begin configuring the platform?
    Edited by: fchagnon on Aug 21, 2012 11:50 AM

    Thanks for your reply.
    root@manager1:~# netstat -an | grep 443
    *.443 *.* 0 0 128000 0 LISTEN
    *.443 *.* 0 0 128000 0 LISTEN
    root@manager1:~# ps -ef | grep java
    root 12584 11237 0 20:40:15 pts/1 0:00 grep java
    root 13185 13184 0 14:22:01 ? 2:14 /usr/jdk/instances/jdk1.7.0/bin/sparcv9/java -Xms200M -Xmx8192M -server -XX:Str
    root@manager1:~# svcs scn common
    STATE STIME FMRI
    disabled Aug_20 svc:/application/management/common-agent-container-1:default
    disabled Aug_20 svc:/application/management/common-agent-container-1:scn-proxy
    disabled Aug_20 svc:/application/scn/db:local
    disabled Aug_20 svc:/application/scn/oracle:default
    disabled Aug_20 svc:/application/scn/oralistener:default
    disabled Aug_20 svc:/application/scn/proxy-enable:default
    disabled Aug_20 svc:/application/scn/ec-server-splashpage:default
    disabled Aug_20 svc:/application/scn/dhcpd:default
    online 14:21:59 svc:/application/scn/satellite-enable:default
    online 14:22:00 svc:/application/scn/db:remote
    online 14:22:00 svc:/application/scn/uce-scheduler:default
    online 14:22:00 svc:/application/scn/db:default
    online 14:22:00 svc:/application/scn/uce-server:default
    online 14:22:05 svc:/application/scn/ajaxterm:default
    online 14:22:40 svc:/application/management/common-agent-container-1:oem-ec
    online 14:22:40 svc:/application/scn/satellite-available:default
    offline Aug_20 svc:/application/scn/proxy-available:default
    root@manager1:~# getent hosts `hostname`
    172.19.233.26 manager1
    root@manager1:~# getent hosts `getent hosts \`hostname\` | awk '{print $1}'
    172.19.233.26 manager1
    The new version of OCDoctor has some issues with accessing the KB. However the 'check-connectivity' function works fine.
    root@manager1:~# /var/opt/sun/xvm/OCDoctor/OCDoctor.sh --troubleshoot
    Ops Center Doctor 4.10 [OC 12.1.1.2076,SunOS11] [Read only] [21-Aug-2012 20:43PM EDT]
    ======================== Checking Enterprise Controller... ==============================
    OK: Total number of agents: 0
    OK: Number of agents with inventories: 0
    OK: Memory is 65024 MB, ZFS is used and zfs_arc_max is set to 8589934592 in /etc/system
    OK: All Solaris 11 agent bundles in /var/opt/sun/xvm/images/agent/ are imported properly to the repository
    OK: Files in /var/opt/sun/xvm/images/agent/ have the right permissions
    OK: Files in /var/opt/sun/xvm/osp/web/pub/pkgs/ have the right permissions
    OK: auth.cgi returns XML
    OK: User 'oracleoc' home folder points to the right location
    OK: User 'allstart' home folder points to the right location
    OK: Apache logs are smaller than 2 GB
    OK: n1gc folder has the right permissions
    OK: All Enterprise Controller packages are installed properly
    OK: All agent packages are installed properly
    OK: Enterprise Controller status is online
    OK: the version is the latest one (12.1.1.2076)
    OK: satadm timeouts were increased
    OK: tar command was properly adjusted in satadm
    OK: no 'conn_properties_file_name' value in .uce.rc
    OK: Found the server .uce.rc
    OK: Server .uce.rc has the correct file permissions
    OK: Server .uce.rc has the correct ownership
    ERROR: Could not access the KB public servers
    Check the username and password and proxy configuration in "Administration" ->
    "Edit Authentications" and "Change HTTP proxy"
    Also, you may try the following command to test connectivity:
    /var/opt/sun/xvm/OCDoctor/OCDoctor.sh --check-connectivity
    OK: Grouplock file doesn't exist
    OK: uce-server .uce.rc file points to a proper JAVA
    OK: Disconnected mode is not configured
    OK: Locales are OK ("C")
    OK: Found only one Solaris 11 agent bundle
    OK: No partially installed packages
    OK: No http_proxy is set in the user profile files
    OK: 'public' folder has the right ownership
    OK: 'public' folder is writable for uce-sds
    OK: 'private' folder has the right ownership
    OK: 'private' folder is writable for uce-sds
    OK: No old jobs rerun (CR 6990675)
    OK: No NCP encryption is used
    OK: 'update-saved-state' folder exists and has the right permissions
    OK: No credential issues found
    =========== Proxy controller is installed but not configured, skipping ==================
    =========== Agent controller is installed but not configured, skipping ==================
    root@manager1:~# /var/opt/sun/xvm/OCDoctor/OCDoctor.sh --check-connectivity
    Ops Center Doctor 4.10 [OC 12.1.1.2076,SunOS11]OCDoctor.sh --check-connectivity
    ======================== Checking Network Connectivity ==============================
    Please enter the My Oracle Support (MOS) Username: xxxxxxxxxxxxxxxx
    Password:
    Is there a proxy? Type the proxy server here, for example 'www-proxy.us.oracle.com' (hit Enter if there is no proxy):
    Test 1/4: Checking CC service reachability (without using user/password yet)
    ==============================================================================
    OK: CC status is OK
    Test 2/4: Checking GUUS service reachability (without using user/password yet)
    ==============================================================================
    OK: GUUS status is OK
    Test 3/4: Downloading Knowledge Channels file from updates.oracle.com
    ===========================================================================
    OK: Knowledge download was successful!
    Test 4/4: Downloading patch 108437-06 from updates.oracle.com
    ===========================================================================
    OK: Patch download was successful!

  • Portal30 Installation/configuration problems.

    Subject: Portal30
    Please share your solution in installing th Oracle Portal 3.0 (included in Oracle 9iAS installation.).
    I am facing problem in its installation on WINDOWS 2000 server.
    The first time I installed the Oracle 9iAS 1.0.2, the Portal30 and Portal30_sso were started . however while trying to configure the Porta-to-go I made some mistakes (What is to be given in the HTTP and HTTPS ports for the Web Integration developer preferences configuration and what is to be given in the settings of Web Integration Server at HTTP/HTTPS Port, User, etc.??).
    Then I made mistake in uninstalling the 9iAS as I straightaway started the Universal Installer for deinstallation without first uninstalling the forms server, report server , etc, using oracle installer, then uninstalling the Portal30 7 Porta30_sso.
    Any way I removed all the entries from the registry and also removed the directories from the disk.
    When I started my installation for 9iAS database cache and Web cache configuration failed. But Portal 30 showed successfull . However there were some error messages dispalyed during the configuration of Portal30 as below:
    loading org/w3c/dom/html/HTMLHeadingElement
    Error while loading
    org/w3c/dom/html/HTMLHeadingElement
    ORA-29506 invalid query derived from using clause.
    ORA-00942 table or view does not exist.
    Error while accessing MD5 table.
    When I did the other post installation configuration and tried to access the Portal30 home page error message as below was displayed :
    call to WPG_SESSION failed.
    error code 4068
    Database login failed. TNS is unable to connect to destination. Invalid TNS address
    supplied or destination is not listeneing.
    The problem could be due to in correct TNS String or it may be due to Listener not started or due to underlying network.
    I checked everything. Listener was started, TNS service name was correct (in the ORACLE_HOME of 9iAS \network\admin directory) and the underlying network was proper. DAD parameters were also correct.
    However, when I checked the PWG_SESSION PACKAGE BODY status It was showing INVALID. When I checked the installation log..it showed error messages like table MD5 not found...
    I am unable to configure my PORTAL30..Please help...or where can I get the solution...
    Thanks with regards
    Riant.
    null

    Subject: Portal30
    Please share your solution in installing th Oracle Portal 3.0 (included in Oracle 9iAS installation.).
    I am facing problem in its installation on WINDOWS 2000 server.
    The first time I installed the Oracle 9iAS 1.0.2, the Portal30 and Portal30_sso were started . however while trying to configure the Porta-to-go I made some mistakes (What is to be given in the HTTP and HTTPS ports for the Web Integration developer preferences configuration and what is to be given in the settings of Web Integration Server at HTTP/HTTPS Port, User, etc.??).
    Then I made mistake in uninstalling the 9iAS as I straightaway started the Universal Installer for deinstallation without first uninstalling the forms server, report server , etc, using oracle installer, then uninstalling the Portal30 7 Porta30_sso.
    Any way I removed all the entries from the registry and also removed the directories from the disk.
    When I started my installation for 9iAS database cache and Web cache configuration failed. But Portal 30 showed successfull . However there were some error messages dispalyed during the configuration of Portal30 as below:
    loading org/w3c/dom/html/HTMLHeadingElement
    Error while loading
    org/w3c/dom/html/HTMLHeadingElement
    ORA-29506 invalid query derived from using clause.
    ORA-00942 table or view does not exist.
    Error while accessing MD5 table.
    When I did the other post installation configuration and tried to access the Portal30 home page error message as below was displayed :
    call to WPG_SESSION failed.
    error code 4068
    Database login failed. TNS is unable to connect to destination. Invalid TNS address
    supplied or destination is not listeneing.
    The problem could be due to in correct TNS String or it may be due to Listener not started or due to underlying network.
    I checked everything. Listener was started, TNS service name was correct (in the ORACLE_HOME of 9iAS \network\admin directory) and the underlying network was proper. DAD parameters were also correct.
    However, when I checked the PWG_SESSION PACKAGE BODY status It was showing INVALID. When I checked the installation log..it showed error messages like table MD5 not found...
    I am unable to configure my PORTAL30..Please help...or where can I get the solution...
    Thanks with regards
    Riant.
    null

  • CE 7.2 SP03 Post Installation activities

    Hi,
    Could you please share any documents or links related to CE 7.2 post installation configurations such as:
    SLD, ECM, Service Registry, ESR, NWDI, BPM VC, GP and Composite Voice.
    Thanks in advance!
    Regards,
    Patana

    Hi
    here are few details just to start with..
    1. Call the SAP NetWeaver Administrator in a browser using the path http://<host>:<httpport>/nwa, and log on with the appropriate administrator user.
    2. After providing User name password NWA home page will get display in that Choose Configuration Management   Scenarios--Configuration Wizard
    3 Configuration Wizard page will get display.
    4. Select task as per your requirement and click start
    5. at the time of SLD configuration, there is a step to setup J2EE Administrator password..
    you can setup password for Administrator and Master Password
    provide password and that password will get setup..
    Thanks,
    Bhupesh

  • Oracle 9i AS post installation help

    Hi all,
    I had installed the Oracle 9i Infrastructure and Application server successfully on Win2000. Tested the services and demo forms. I Need to know post installation configuration details and steps on how to deploy the forms and reports into it. Thankful if you can provide some help on this.
    regards,
    Sampath

    Ahter installing ias successfully
    you can be able to Apache start/stop ,Forms and Reports server sample application ,and lot's of other stuff under oracle-iSuits.
    For example if you want to see the Apache main page start the server and in the browser page type the host name you can see the links.
    null

  • XI Post Installation....Need help...

    Hi,
    I am new to XI and I am installing XI on a Windows 2000 server. I am done with the installation part....(web as ABAP+Java add in + newtweaver XI Component)....Now I am in the post install configuration steps....
    My question is that...when I did the install of WEB AS ABAP...I did a local client copy and created client 100 (UCSV Profile)....now I am not sure why I had to create this client 100? Can some one tell me what is the use of this client 100.
    Second question is that for the post installation configuration, should I create all the RFC's and SLD Configuration etc in Client 000 or should I do all this post installation configuration in client 100?...
    Please help me.....
    Thanks,
    Madhu

    Today I successfully started XI IB. I had two troubles and solutions as follows:
    1. In our Co, we have a proxy server, so after installing j2sdk142, I need change the settings of java web start. Open Java WS directly then click cancel until the log in window disappears. Change the proxy settings to what you need.
    2. Please assign all the needed roles for XI into your user account. Even if you are an user with the profile of SAP_ALL, you need add the needed roles into your account.
    Any more issues to start XI, you can reach me by [email protected]

  • Post XI configuration guide needed

    Hi,
    Does anyone have a post installation configuration guide for XI.
    There are porblems like not able to monitor in RWB, take s/w components into IR, cant create scenario in ID. User has all the roles. But more configuration is there i gues. Please forward the same to the email id [email protected]
    Thanks
    Anju

    Sanju,
    This guide is available on SDN itself.
    Please do a quick search on SDN and you are bound to find it,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
    http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
    Regards
    Bhavesh

  • Access Content Server Pos-installation Configuration

    Hello,
    I am new with Oracle ECM, I am starting to use it for Webcenter requirements.
    I have installed succesfully Oracle Content Server. I accessed http://localhost:16200/cs, and it showed me the post-installation configurations.
    I made some changes and restarted the server. I then realized I had made some mistakes. How can I access the configuration screen again, and make some changes? Thank you.
    Joao

    Hi
    That config screen does not show up a second time .
    If you want to make modifications to the configurations then make them in<domain_home>/ucm/cs/config/config.cfg
    After the changes are done UCM restart should be done .
    Thanks
    Srinath

  • Post Instalation Configuration  for NW2004s SP7

    Hi,
    I installed NW2004s SP7 and its installed sucessfully.
    now if i want to connect JCos and RFCs i need to do some post installation configuration.
    so please let me know what things i need to do.
    i am unable to connect R3 system.
    so plese let me know as soon as possible.
    regards
    mmukesh

    Hi
    See this Sample
    https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/f0b0e990-0201-0010-cc96-d7ecd2e51715
    see this help
    http://help.sap.com/saphelp_nw2004s/helpdata/en/01/43e13d82fcfb34e10000000a114084/frameset.htm
    See this thread
    Re: Can't get RFC connection to R/3 System
    Kind Regards
    Mukesh

  • Post-Installation and Configuration of Solution Manager 7.1

    Dear community,
    we are a SAP Channel Partner and want to offer SAP BO support; therefore I am about to set up the Solution Manager 7.1 on a Windows 2008 R2 host with Oracle Database 11g. The installation has been completed successfully and I have applied our permanent license, but performing the following post-installation steps some problems and questions have arised. Because I don't want to write a novel right here, let's begin with the first issue:
    Updating the Solman, as suggested in post-installation.
    I want to update my ISS to SP 04 and followed the common instructions using ESPIN and SPAM (see, for example, this thread: ).
    That means, all packages have been loaded from ESPIN into SPAM. The problem is, that I have SPAM version 0039, but I get error message "you need at least version 0040" when I try to start the update queue. Also, I am not able to download a newer version of SPAM from SMP (702-0043 and 702-0045 are available there), because I need MOPZ for that (a message comes up telling me that items in my download basket have to be confirmed before I am allowed to download them), which will be available not before basic configuration during solman_setup later on.
    So, what to do? Is there another way to get that 5MB SPAM update or do I have to go on with the old version?
    Thanks in advance
    Sönke
    Edited by: Sönke Schnurr on Dec 29, 2011 4:15 PM (small addendum)

    Okay, I am just re-installing my Solution Manager 7.1, because I couldn't solve my SPAM problem (linked thread in my next-to-last post).
    I would like to configure the whole SAProuter SNC thing now. The Solution Manager host is the same which has the SAProuter installed. I have already registered and certified it and created the Windows Service which starts the SAProuter (saprouter -r -S 3299 -G routerlog -K u201Cp:CN=XXX, OU=YYY, OU=SAProuter, O=SAP, C=DEu201C), XXX and YYY being the appropriate values.
    Now I want to create my saprouttable. A beta version is this one here, based on some tutorials in the internet:
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 3299
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"  3200
    1. deny all other connections
    D * * *
    Do you think it's alright? I'm connecting via host port 3299, so the first two lines should be alright, shouldn't they?.
    The fourth line P ? The local IP address of my host? What is that line for at all?
    Another question: The connection to OSS doesn't work yet, probably because of our local hardware router firewall. Which ports do I have to forward? I suppose it is just 3299?
    An elaborate answer would be highly appreciated!
    Regards
    Sönke

Maybe you are looking for

  • Unknown operation calling a Web Service

    I have a problem writting a Web Service client. I've tried with Stubs and Dynamic Proxy but both give me the same error when I call the WS method named 'Saluda' located in class DorsalSEI : Unknown Operation: {urn:Dorsal/wsdl}Saluda at org.WS.server.

  • Area Chart View in OBIEE 10 g

    I have a Area chart view which shows sales volume by Product by Time. Time Dimension is plotted on X axis and Product is used as Legends (Measure Labels in Pivot Table Chart View). The Problem is user wants to display the Legends as Data Labels on Ro

  • Why is my Bounce not working?

    I am trying to bounce a project which has a Sibelius file rewired to it.  I have successfully done this before, and it seems to be doing a bounce as usual, but I cannot find the file - either in the audio bin or iTunes or the folder to which I have a

  • Trying to update printer drivers

    Upgraded to Lion recently.  Trying to update printer drivers.  All attempts to open official Apple printer drivers packages result in: "The Installer can't open the package. There may be a problem with file ownership or permissions." Fussed with perm

  • NotificationExce application quit unexpectedly

    Does anybody know how to bypass this error when it starts up when it is in safe boot or normal boot? It happened after i erased the shared folder from the user folder. Do i have to reinstall 10.5? Apple tech told me it was a system wide error. Any su