Post Installation errors R12

Hi,
My installation went smooth without errors (sol 10).
But during Post install System check at the end, LOGIN PAGE and DBC File checks are showing as failed.
What could be the problem.
If i manually run adgendbc.sh, it just hangs at
Unique contraint error (00001)is OK....
No dbc file is created.
Also i am noticing that under /var/opt/oracle it has not created the oratab or orainst.loc files.
There is full permission granted to these folder.
Can some body help me in this regards

There is nothing under /var/opt/oracle? runInstaller should prompt for you to run some instroot.sh or something like it to setup the initial inventory location.
Make sure all of the installation requirements for Solaris have been met:
Oracle Applications Installation and Upgrade Notes Release 12 (12.0) for Solaris Operating System (SPARC)
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=402312.1
Usually, one installs the ERP on the internal network, then clones just a middle tier to the DMZ. Make sure the database can "see" the real IP address of the DMZ machine.

Similar Messages

  • EBS R12 Post Installation Error on Linux

    Hi Everyone -
    I'm trying to install R12 on Oracle Linux and I'm having trouble getting through the post-installation verification. There are two errors - JSP and AppsLogin. The message for JSP is JSP not responding..waiting 15 seconds. The message w/ AppsLogin is Appslogin not created. I am using adapcctl.sh -status to check the status of the web server and find that the HTTP server is running but three OC4J processes are down and can't be started. Any ideas??

    Sorry, I should have been clearer about my post.
    I am not the original poster of this issue, I was just experiencing the same problem. I should have mentioned that I am running Solaris 5.8 on a 64-bit SPARC machine.
    Anyway, everything is working except for the login page. something is missing from my classpath and I am not sure what. When I run
    http://xxxx:8004/OA_HTML/jtflogin.jsp
    I get:
    java.lang.NoClassDefFoundError     at jtfacerr.jspService(_jtfacerr.java:314)     [jtfacerr.jsp]     at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.0.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:416)     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:478)     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:401)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:270)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:42)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:204)     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:761)     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:727)     at jtflogin.jspService(_jtflogin.java:838)     [jtflogin.jsp]     at com.orionserver[Oracle Containers for                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Post Installation Errors in loading ORacle R12 on windows vista!!! HElp!!!!

    Hi,
    I got all errors in the Post installation checks when loading ORacleR12 E business suite on vista.
    Acutally during installation steps, at step 1 ..at around 30 of 147, the installation stopped quoting an error like unzip file not found or cant be opened....i dont clearly remember but the step 1 was not completedly fully..
    THen it skipped to step 2,3 and I think the same happened in step 4 too. There was an error and it skipped some install files i think.
    How do I Load the s/w correctly or now how do I solve is errors now?
    PLEASE HELP! I Am novice to APPS so give me a detailed answer please...like the directories to look for and the paths and solutions too...
    Await an answer for the GURUS and EXPERTS!!!
    Regards,
    indira meduri
    Edited by: user529846 on Jan 18, 2010 11:13 PM

    Hi,
    Below are the errors i got in Post installation checks...! Can you help?
    Database Availability
    command: /home/Oracle/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /home/Oracle/PROD/db/tech_st/11.1.0/PROD_linux.env APPS/APPS
    riwTDBup.sh started at Wed Jan 20 05:36:52 CST 2010
    Parameters passed are : /home/Oracle/PROD/db/tech_st/11.1.0/PROD_linux.env APPS/APPS
    Cannot find environment file /home/Oracle/PROD/db/tech_st/11.1.0/PROD_linux.env
    RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 1 command: /home/Oracle/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /home/Oracle/PROD/inst/apps/PROD_linux/ora/10.1.2/PROD_linux.env APPS/APPS
    riwTDBup.sh started at Wed Jan 20 05:36:53 CST 2010
    Parameters passed are : /home/Oracle/PROD/inst/apps/PROD_linux/ora/10.1.2/PROD_linux.env APPS/APPS
    Cannot find environment file /home/Oracle/PROD/inst/apps/PROD_linux/ora/10.1.2/PROD_linux.env
    RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 1
    Configuration Upload
    uploading config file at /tmp/01200535/conf_PROD.txt
    Failed upload of config file at /tmp/01200535/conf_PROD.txt
    Environment File
    RW-50016: Error: - Database ORACLE_HOME environment file was not created:
    File = /home/Oracle/PROD/db/tech_st/11.1.0/PROD_linux.env RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
    File = /home/Oracle/PROD/inst/apps/PROD_linux/ora/10.1.3/PROD_linux.env RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
    File = /home/Oracle/PROD/inst/apps/PROD_linux/ora/10.1.2/PROD_linux.env RW-50016: Error: - APPL_TOP environment file was not created:
    File = /home/Oracle/PROD/apps/apps_st/appl/PROD_linux.env RW-50016: Error: - ADOVARS environment file was not created:
    File = /home/Oracle/PROD/apps/apps_st/appl/admin/adovars.env RW-50016: Error: - APPSCONFIG was not created:
    File = /home/Oracle/PROD/apps/apps_st/appl/admin/adconfig.txt
    DBC File
    RW-00023: Error: - DBC file was not created:
    File = /home/Oracle/PROD/inst/apps/PROD_linux/appl/fnd/12.0.0/secure/PROD.dbc
    HTTP
    checking URL = http://linux.server:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Help Page
    checking URL = http://linux.server:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP
    checking URL = http://linux.server:8000/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

  • Post Installation error of Oracle AppsR12

    Hi,
    During the post Installation checks of Apps R12 installation, I got the following error.
    adopmnctl.sh: Starting Oracle Process Manager (OPMN)
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Then
    I have created down all the application services, database and listener.And created softlink as root user and I press Retry button. Still I am getting this error.
    Then I ran the ./adapcctl.sh manually, After watching the log file, I got the following error in the log file.
    getaddrinfo(localhost, NULL, 1) failed (Temporary failure in name resolution): Connection refused
    getaddrinfo(localhost, NULL, 1) failed (Temporary failure in name resolution): Connection refused
    getaddrinfo(localhost, NULL, 1) failed (Temporary failure in name resolution): Connection refused
    opmnctl: opmn start failed.
    : adopmnctl.sh: exiting with status 2
    Could you please help me to get rid of this error and finish the installation.
    Thanks and Regards,
    Khasim

    please confirm
    you have correct IP defined for localhost i.e., 127.0.0.1?
    R12 Rapidwiz Postinstall Steps Http, Login page, Virtual directory, JSP, Help Page Fails (Doc ID 414414.1)
    ApPsMaStI
    sharing is Caring

  • Post installation error "Local logical system is not defined"

    Hello everyone,
    I freshly installed the latest SAP NetWeaver 7.01 ABAP Trial from scratch and like to configure ALE.
    I followed thew steps of http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    (ALE Quick Start) but cannot get through the following step on page 12:
    From the R/3 Implementation Guide screen in TA SALE
      choose Basis
        Application Link Enabling (ALE)
          Modeling and Implementing Business Processes
            Maintain Distribution Model and Distribute Views
    Clicking on Maintain Distribution Model or using TA BD87, I immedeately get the following error:
    The initialization of the logical system has failed.
    With TA BD64 the error: Local logical system is not defined arises. I also looked at
    /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi,
    /people/vikash.krishna/blog/2006/10/15/replicating-hr-master-data-part-1 and
    /people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide describing the same actions
    to find an explanation, but without success
    I assume, the error does not occur because the trial version does not support it, but
    because of other post installation activities that must be done.
    I already created two logical systems and assigned them to newly created clients 100 and 200,
    but this did not have any impact on BD87 and BD64 as i was hoping.
    Does somebody know what to do here?
    Thanks in advance and kind regards,
    Andreas

    Hi Naveed,
    i made the following settings:
    SCC4: new entries created
    100     Sending System
    200     Receiving System
    SM59: new ABAP type 3 connections:
    RFC_DEST_LS_100
    RFC_DEST_LS_200
    - Tab Logon & Security Logon user: current user (bcuser client 001)
    Connection test is successful
    - Technical Settings: target host: localhost
    SALE: new logical systems created
    LS_100
    LS_200
    SCC4:
    double click on 100 Sending System   configured with logical system LS_100
    double click on 200 Receiving System configured with logical system LS_200
    kind regards
    Andreas

  • Error in PI 7.0 not connect to go.bat & Post installation errors

    im completed installation of PI 7.0
    SYSTEM NAME : BIW7
    System ID   : BI7
    DB ID       : BIW
    Instance No : 04
    for post installation unable tp connect  go.bat
    im giving right password
    http://biw7:50400/ExchangeProfile   = it gives error 404 not found
    http://biw7:50400/sld   gives following error
    503   Service Unavailable
    Application cannot be started.
      Details:   com.sap.engine.services.deploy.container.ExceptionInfo: Naming error.

    For exchange profile, ur URL is incorrect. Try this
    http://biw7:50400/exchangeProfile
    Regards,
    Prateek

  • Post-installation Error Oracle 9i on Red Hat 8.0

    After installing the package, I tried to follow the following
    Post-Installation
    Let's fix the issues Oracle had with ins_ctx.mk and starting the agent. Open a new terminal and log in as the oracle user. Execute these lines:
    [oracle@miniroko oracle]$ cd $ORACLE_HOME/network/lib
    [oracle@miniroko lib]$ make -f ins_net_client.mk install
    But the linker doesen seem to identify one of the options and I've got the error:
    make -f ins_net_client.mk install
    chmod 755 /home/oracle/OraHome1/bin
    /home/oracle/OraHome1/bin/echodo gcc -L/home/oracle/OraHome1/lib/ -L/home/oracle/OraHome1/rdbms/lib/ -L/home/oracle/OraHome1/network/lib/ -L/home/oracle/OraHome1/lib/ -L/home/oracle/OraHome1/rdbms/lib/ -L/home/oracle/OraHome1/network/lib/ -o trcasst /home/oracle/OraHome1/network/lib/s0nue.o -lntal9 \
    -lclntsh `cat /home/oracle/OraHome1/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /home/oracle/OraHome1/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lwtc9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 `cat /home/oracle/OraHome1/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /home/oracle/OraHome1/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 `cat /home/oracle/OraHome1/lib/sysliblist` -ldl -lm -lnonc9 -lnl9 -ln9 -lnlsnr9 -lnlsnrc9 -lnsgr9 -lnmd -lnms -lncm9 -lnmsp -lpeer -lnro9 -ln9 -ltrace9 -lnl9 -lnonc9 -lnlsnr9 -lnlsnrc9 -lnmd -lnms -lncm9 -lnmsp -ln9 `cat /home/oracle/OraHome1/lib/sysliblist` -Wl,-rpath,/home/oracle/OraHome1/lib:/lib:/usr/lib -lm `cat /home/oracle/OraHome1/lib/sysliblist` -ldl -lm /home/oracle/OraHome1/rdbms/lib/defopt.o
    gcc -L/home/oracle/OraHome1/lib/ -L/home/oracle/OraHome1/rdbms/lib/ -L/home/oracle/OraHome1/network/lib/ -L/home/oracle/OraHome1/lib/ -L/home/oracle/OraHome1/rdbms/lib/ -L/home/oracle/OraHome1/network/lib/ -o trcasst /home/oracle/OraHome1/network/lib/s0nue.o -lntal9 -lclntsh -lnbeq9 -lnhost9 -lnus9 -lnldap9 -lldapclnt9 -lnsslb9 -lncrypt9 -lnoname9 -ln9 -lntcp9 -lntcps9 -lnsslb9 -lntcp9 -lntns9 -ln9 -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 -lnbeq9 -lnhost9 -lnus9 -lnldap9 -lldapclnt9 -lnsslb9 -lncrypt9 -lnoname9 -ln9 -lntcp9 -lntcps9 -lnsslb9 -lntcp9 -lntns9 -ln9 -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lwtc9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnbeq9 -lnhost9 -lnus9 -lnldap9 -lldapclnt9 -lnsslb9 -lncrypt9 -lnoname9 -ln9 -lntcp9 -lntcps9 -lnsslb9 -lntcp9 -lntns9 -ln9 -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 -lnbeq9 -lnhost9 -lnus9 -lnldap9 -lldapclnt9 -lnsslb9 -lncrypt9 -lnoname9 -ln9 -lntcp9 -lntcps9 -lnsslb9 -lntcp9 -lntns9 -ln9 -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -ldl -lm -lpthread -ldl -lm -lnonc9 -lnl9 -ln9 -lnlsnr9 -lnlsnrc9 -lnsgr9 -lnmd -lnms -lncm9 -lnmsp -lpeer -lnro9 -ln9 -ltrace9 -lnl9 -lnonc9 -lnlsnr9 -lnlsnrc9 -lnmd -lnms -lncm9 -lnmsp -ln9 -ldl -lm -lpthread -Wl,-rpath,/home/oracle/OraHome1/lib:/lib:/usr/lib -lm -ldl -lm -lpthread -ldl -lm /home/oracle/OraHome1/rdbms/lib/defopt.o
    /usr/bin/ld: cannot find -lclntsh
    collect2: ld returned 1 exit status
    make: *** [trcasst] Error 1
    SERVER02>
    TIA,
    Juliana de Paula

    I think you have to relink genclntsh lib ... there should be a script... genclntsh in $ORACLE_HOME/bin.
    the directive -laaa means that linker is looking for libaaa.
    If an error occure, if I remember correctly try to remove the -Z flags in ld command.
    Bye
    Pier Paolo

  • Post installation errors

    Hi Friends,
    I Installed Oracle 11i 11.5.9 on Linux 4.0 Advanced Server. I am using the same machine for Server and client to logon to Oracle Applications, using Mozilla browser. The system Post-Installation Check inspected my system for a completed installation and found the following "JSP check" did not succeed for TEST instance. The detailed error is:
    JSP Check :checking URL = http://oraapps.atos.com:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/testappl/fnd/11.5.0/secure/oraapps_test.dbc
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding
    I finished the installation by bypassing the JSP error and tried to logon Apps Home page using the following URL - http://oraapps.atos.com:8000 I get the links for loging to different applications(CRM,OAM and E-Business Suite) . When I try to login E-Business home page I get the following error:
    Not found : The requested URL/oa_servlets/AppsLogin was not found on this server.
    java version that i used is JDK1.3.1_16
    Kindly help in this regard.
    Thanks
    srikumar

    Check the install note i have for 11.5.10 all possible steps i could list down with the screen shots, maybe you find that useful
    http://appsdbablog.com/blog/installation/
    Sam
    http://www.appsdbablog.com

  • Post installation error

    Hi folks ,
    job cancelled while  doing post installation (SGEN ) and 89% job completed....
    it show following error
    ZDATE_ILLEGAL_LOCTIME     
    how can i solve this error .....
    give me suggestion
    regards
    sathish

    Hi,
    please check with ABAP dump error
    How to correct error line what it says
    some times it can be time of Db server is not in sync with Application server or difference in O/s and application server.
    Also can you look at this thread
    [ZDATE_ILLEGAL_LOCTIME error]
    and follow the notes
    SAP Note 447839 - ZDATE_ILLEGAL_LOCTIME
    Note 481835 - Analyzing the time zone settings

  • POST INSTALLATION ERROR : JSP ?? HELP OUT

    My Pre Installation Steps were perfect
    The installation went fine
    I Installed on XP, used Cygwin, and VC++, as given in the blog, for installing on XP
    Everything went fine.
    It took me over 5 hours for staging and installing
    But at the last stage
    Post Installation Steps checks was stuck some where
    I am sending you the last part of log file. It might help you to detect the error.
    Please tell me what went wrong, and where
    C:\Stage11i\startCD\Disk1\rapidwiz>echo off
    Mon 02/11/2008
    01:21 AM
    "The environment settings are as follows ..."
    " ORACLE_HOME : C:\oracle\visora\8.0.6"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : C:\oracle\visora\8.0.6\bin;C:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\Perl\site\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem; C:\Cygwin\bin; C:\V98\VC\bin"
    " LD_LIBRARY_PATH : C:\oracle\visora\8.0.6\lib"
    SQL*Plus: Release 8.0.6.0.0 - Production on Mon Feb 11 01:21:58 2008
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    Connected.
    Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.6.0 - Production
    connect test returning code 0
    ERRORCODE = 0 ERRORCODE_END
    Apps ORACLE_HOME connection test has succeeded
    Environment File Check
    Database ORACLE_HOME environment file passes instantiated variables test:
    File = C:\oracle\visdb\9.2.0\VIS_sid-87f00f29add.env
    Apps ORACLE_HOME environment file passes instantiated variables test:
    File = C:\oracle\visora\iAS\VIS_sid-87f00f29add.cmd
    iAS ORACLE_HOME environment file passes instantiated variables test:
    File = C:\oracle\visora\8.0.6\VIS_sid-87f00f29add.cmd
    APPL_TOP environment file passes instantiated variables test:
    File = C:\oracle\visappl\VIS_sid-87f00f29add.cmd
    ADOVARS environment file passes instantiated variables test:
    File = C:\oracle\visappl\admin\adovars.cmd
    APPSCONFIG passes instantiated variables test:
    File = C:\oracle\visappl\admin\adconfig.txt
    DBC File Check
    DBC file passes instantiated variables test:
    File = C:\oracle\visappl\fnd\11.5.0\secure\VIS_sid-87f00f29add\vis.dbc
    HTTP Check
    checking URL = http://sid-87f00f29add.mydomain:8000
    Portal is responding
    JSP Check
    [b] checking URL = http://sid-87f00f29add.mydomain:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=C:\oracle\visappl\fnd\11.5.0\secure\VIS_sid-87f00f29add\vis.dbc
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    [b] JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding
    PHP Check
    checking URL = http://sid-87f00f29add.mydomain:8000/OA_HTML/US/ICXINDEX.htm
    Login Page is responding
    As Mentioned i am able to open the homepage for Oracle
    But not able to go ahead.
    please help me what is missing ?
    Thanks in advance
    Sidharth

    Sidharth ,
    Do you have a valid entry in the hosts file?
    I would suggest you change your hostname "sid-87f00f29add", and check then. You can either change it and start the installation all over again OR follow the steps outlined in the following notes to do that.
    Note: 341322.1 - How to change the hostname of an Applications Tier using AutoConfig
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=341322.1
    Note: 338003.1 - How to change the hostname of an Database Tier using AutoConfig
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=338003.1

  • Sap Web As 6.40 SR1 post installation error

    Hi, I have a problem with the installation of WEB AS ABAP.
    I installed  Sap Web As 6.40 SR1 following this steps:
         Oracle 9.2.0 with the patch 9.2.0.4
         Web As Abap.
    I assigned two different names for the Oracle System ID and the Sap System ID.
    All the installations finished without errors.
    In the post installation if I enter in the Sap Management
    Console to start the SAP instance i see the following error:
    Process: strdbs.cmd
    Description: Database
    Status: could not be started
    I try to resolve the problem following Sap note 786673 (section security: change permission
    for Oracle files) but unsuccessfully.
    Do you have any suggestion?

    Hi all,
    first of all thanks a lot for your answers.
    I have reinstalled the WEB AS ABAP using the same SID for the DB and for SAP (the SID is C01).
    Unfortunately, I found the same error when I go to start SAP.
    I checked if the oracle services are running and the check was ok, moreover I used the Oracle Enterprise Manager to check if oracle works.
    Sanjeev, I tried to find the script stdbs in C:\usr\sap\C01\SYS\exe\run but without success (I can't find the file above-mentioned).
    I applied also another time the SAP NOTE 786673 (section security: change permission for Oracle files) but unsuccessfully.
    This is the result of the sapstart.loog
    SAP-R/3-Startup Program
    Starting at 2005/10/11 13:50:30
    Startup Profile: "C:\usr\sap\C01\SYS\profile\START_DVEBMGS00_leonard"
    Starting Programs
    (416) CreateProcess(C:\usr\sap\C01\SYS\exe\run\strdbs.cmd) failed(2). ENOENT*: No such file or directory OR: The system cannot find the file specified. 
    (1780) CreateProcess: C:\usr\sap\C01\SYS\exe\run\msg_server.exe pf=C:\usr\sap\C01\SYS\profile\C01_DVEBMGS00_leonard
    (356) CreateProcess: C:\usr\sap\C01\SYS\exe\run\disp+work.exe pf=C:\usr\sap\C01\SYS\profile\C01_DVEBMGS00_leonard
    (1852) CreateProcess: C:\usr\sap\C01\DVEBMGS00\igs\bin\igswd.exe -dir=C:\usr\sap\C01\DVEBMGS00\igs -mode=all -sysname=C01 -sysno=00
    Do you have any suggestion to solve this strange problem??
    Thanks a lot.
    Eugenio.
    Message was edited by: Eugenio Cassiano

  • Post Installation error oracle r12

    Hi all,
    Thanks for all your support,
    I installed oracle r12 (db in one hard disk and application in another hard disk) But i encountered two things
    failed in post install checks One is Jsp and another one login page. By the advice I run autoconfig file..It completed successfully. when i started services Except OC4J services remaining all are started.
    I encountered the following error for forms OC4J and OACORE OC4J,
    ERROR: Timed out (100000) :Interrupted Exception in oracle r12 Installation.
    please suggest me....
    Thanks & Regard.
    Harish
    Edited by: 805567 on Feb 14, 2011 5:14 AM

    Installation related question must be posted in {forum:id=64} forum

  • Oracle Apps Post Installation Error

    Dears,
    Thanx very much for your wonderful posts.Really Appreciate your time and help.
    I tried to install Oracle R12 and getting this error at Post Install. Checked all services. They are working fine. Also Database connection is working fine. Could you throw some light on where should I dig upon to trace the error. It starts issue from configuration upload file CONF_VIS.txt
    Database Availability
    command: cmd.exe /c D:\StageR12\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd F:\oracle\VIS\db\tech_st\10.2.0\VIS_apps.cmd sqlplus D:\StageR12\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
    D:\StageR12\startCD\Disk1\rapidwiz>echo off
    Tue 03/10/2009
    01:45 AM
    ECHO is off.
    ECHO is off.
    Tue 03/10/2009 01:45 AM
    VIS_apps.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : F:\oracle\VIS\db\tech_st\10.2.0"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : F:\oracle\VIS\db\tech_st\10.2.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;F:\oracle\VIS\db\tech_st\10.2.0\bin;F:\oracle\VIS\db\tech_st\10.2.0\appsutil\jre\bin;F:\oracle\VIS\db\tech_st\10.2.0\appsutil\jre\bin;F:\cygwin\bin;f:\perl\bin\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\wbem;c:\program files\intel\dmix;F:\cygwin\bin;F:\MicrosoftVisualStudio\Common\Tools\WinNT;F:\MicrosoftVisualStudio\Common\MSDev98\Bin;F:\MicrosoftVisualStudio\Common\Tools;F:\MicrosoftVisualStudio\VC98\bin;F:\cygwin\bin;F:\cygwin\etc"
    " LD_LIBRARY_PATH : F:\oracle\VIS\db\tech_st\10.2.0\lib"
    SQL*Plus: Release 10.2.0.2.0 - Production on Tue Mar 10 01:45:22 2009
    Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
    Connected.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    connect test returning code 0
    ERRORCODE = 0 ERRORCODE_END
    Database ORACLE_HOME connection test has succeeded
    command: cmd.exe /c D:\StageR12\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd F:\oracle\VIS\inst\apps\VIS_apps\ora\10.1.2\VIS_apps.cmd sqlplus D:\StageR12\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
    D:\StageR12\startCD\Disk1\rapidwiz>echo off
    Tue 03/10/2009
    01:45 AM
    "The environment settings are as follows ..."
    " ORACLE_HOME : F:\oracle\VIS\apps\tech_st\10.1.2"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : F:\oracle\VIS\apps\tech_st\10.1.2\bin;F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;F:\cygwin\bin;f:\perl\bin\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\wbem;c:\program files\intel\dmix;F:\cygwin\bin;F:\MicrosoftVisualStudio\Common\Tools\WinNT;F:\MicrosoftVisualStudio\Common\MSDev98\Bin;F:\MicrosoftVisualStudio\Common\Tools;F:\MicrosoftVisualStudio\VC98\bin;F:\cygwin\bin;F:\cygwin\etc"
    " LD_LIBRARY_PATH : F:\oracle\VIS\apps\tech_st\10.1.2\lib"
    SQL*Plus: Release 10.1.0.5.0 - Production on Tue Mar 10 01:45:22 2009
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    connect test returning code 0
    ERRORCODE = 0 ERRORCODE_END
    Apps ORACLE_HOME connection test has succeeded
    Configuration Upload
    uploading config file at F:\oracle\VIS\db\tech_st\10.2.0\appsutil\conf_VIS.txt
    AppsConfig : 'config.txt' uploading...
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : apps
    sDbDomain : me.com
    sDbPort : 1521
    sDbSid : VIS
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@apps.me.com:1521:VIS
    Connection obtained
    -------------------ADX Database Utility Finished---------------
    Successful upload of config file at F:\oracle\VIS\db\tech_st\10.2.0\appsutil\conf_VIS.txt
    Environment File
    Database ORACLE_HOME environment file passes instantiated variables test:
    File = F:\oracle\VIS\db\tech_st\10.2.0\VIS_apps.env
    Apps ORACLE_HOME environment file passes instantiated variables test:
    File = F:\oracle\VIS\inst\apps\VIS_apps\ora\10.1.3\VIS_apps.cmd
    iAS ORACLE_HOME environment file passes instantiated variables test:
    File = F:\oracle\VIS\inst\apps\VIS_apps\ora\10.1.2\VIS_apps.cmd
    APPL_TOP environment file passes instantiated variables test:
    File = F:\oracle\VIS\apps\apps_st\appl\VIS_apps.cmd
    ADOVARS environment file passes instantiated variables test:
    File = F:\oracle\VIS\apps\apps_st\appl\admin\adovars.cmd
    APPSCONFIG passes instantiated variables test:
    File = F:\oracle\VIS\apps\apps_st\appl\admin\adconfig.txt
    DBC File
    DBC file passes instantiated variables test:
    File = F:\oracle\VIS\inst\apps\VIS_apps\appl\fnd\12.0.0\secure\VIS.dbc
    HTTP
    checking URL = http://apps.me.com:8000
    HTTP Listener is responding
    Help Page
    checking URL = http://apps.me.com:8000/OA_HTML/help
    Page is responding
    Virtual Directory
    checking URL = http://apps.me.com:8000/OA_MEDIA/FNDLOGOL.gif
    Page is responding
    checking URL = http://apps.me.com:8000/OA_JAVA/oracle/apps/fnd/admin/server/server.xml
    Page is responding
    checking URL = http://apps.me.com:8000/OA_CGI/FNDWRR.exe
    Page is responding
    JSP
    checking URL = http://apps.me.com:8000/OA_HTML/jtfTestCookie.jsp
    JSP is responding
    Login Page
    checking URL = http://apps.me.com:8000/OA_HTML/AppsLogin
    Page is responding
    DoInstallPanel - Summary Text
    The Rapid Install Wizard will now install the following:

    I do not see any errors in the log file entries you are posting here.
    Thanks,
    Hussein

  • In PI Post Installation error in template installer

    Hi,
    When i run the template installer it shows the following error
    The process errors out on configure the role of Integration service - error max no of 100 conversation exceeded. SXMB_SET_ROLE_TO_IS AbapConfigurationWriter FAILED.
    Your help expected.

    Hi Sony,
    The error says "max no of 100 conversations exceeded". that means more than 100 users are accessing the R/3 system simultaneously and the SSO is configured only for maximum of 100.
    Refer SAP  notes: 316877, 314530
    For this CPIC is an OS environment variable and you should change this on the server side. You can increase the default value for CPIC_MAX_CONV (see note 314530).
    Regards,
    Prateek

  • Post Installation - Error while starting application Server(Weblogic10.3.5)

    I have installed the Webcenter Sites and can access the home ( http://localhost:7101/servlet/wem/fatwire/home ) .
    However , I am getting the below error . The application server is weblogic 10.3.5 ( Jdeveloper Integrated Weblogic Server ) .
    I have Observed the below error in the application server console .
    Can anyone please help to over come this error ?
    2012-07-09 18:23:41,889 ERROR [com.fatwire.logging.cs] - <Exception reading url from http://127.0.0.1:7101/servlet/ContentServer?pagename=OpenMarket%2FXcelerate%2FSearch%2FEvent>java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to server: '127.0.0.1', port: '7101'
    at weblogic.net.http.HttpClient.openServer(HttpClient.java:333)
    at weblogic.net.http.HttpClient.openServer(HttpClient.java:425)
    at weblogic.net.http.HttpClient.New(HttpClient.java:252)
    at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:189)
    at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:374)
    at weblogic.net.http.SOAPHttpURLConnection.getInputStream(SOAPHttpURLConnection.java:37)
    at java.net.URL.openStream(URL.java:1010)
    at COM.FutureTense.Util.ftUtil._readFromInputStream(ftUtil.java:826)
    at COM.FutureTense.Util.ftUtil.readByteURL(ftUtil.java:730)
    at COM.FutureTense.Util.ftUtil.readURL(ftUtil.java:696)
    at COM.FutureTense.Platform.SystemEvents.RequestEventItem.execute(RequestEventItem.java:58)
    at COM.FutureTense.Platform.SystemEvents.AbstractEventItem.run(AbstractEventItem.java:170)
    at COM.FutureTense.Platform.SystemEvents.FileSystemBasedClusteredEventExecutor$LockingCallable.call(FileSystemBasedClusteredEventExecutor.java:232
    at COM.FutureTense.Platform.SystemEvents.FileSystemBasedClusteredEventExecutor$LockingCallable.call(FileSystemBasedClusteredEventExecutor.java:198
    at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
    at java.util.concurrent.FutureTask.run(FutureTask.java:138)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
    at java.lang.Thread.run(Thread.java:662)
    <Protocol> <setPropertiesInternal> down_thread was deprecated and is ignored
    <Protocol> <setPropertiesInternal> up_thread was deprecated and is ignored
    .....

    If WCS is indeed installed on http://localhost:7101 and it can't see http://127.0.0.1:7101 then you should check to see if there is any restriction on the app server, OS, or firewall (though these requests probably aren't leaving the box) that could be preventing requests of this sort. You're seeing the event engine trying to talk to the event host.

Maybe you are looking for