Post-installation for BW, help
Hi
this is min from india and i want help on steps for the post installation for BW 3.1. i cant work in rsa1 as told in groups i have done the client copy and kept the default profile still i cant work in that rsa1.some where i am doing the mistake can any one plz tell the post installation steps plzz its urgent to me
thanks
HI:
The real problem is that you have installed a version that is about to go out of maintenance at the end of this year. It does not make sense to use 3.1 for a new installation. If you are performing a new installation, it is recommended to utilize the current version, SAP NetWeaver BI 2004s. If for some reason you are unable to install the current version, at the very least install the 3.5 version.
Please see this area:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000632586&
If you persist with your (ill-adivsed) new installation of 3.1, and this problem continues, please provide the exact error message that you receive when you attempt to go into RSA1.
Best Regards -
Ron Silberstein
SAP
Similar Messages
-
Post Installation for SAP PI 7.0
I have done installation and post installation for SAP XI 3.0. Now I am trying to do the same with SAP PI 7.0. I am done with the installation. Presently working on Postinstallation. I believe this is not similar to SAP XI 3.0 ? Please let me know what are the difference in the Postinstallation between these two and also any links or documents for SAP PI 7.0 will be appreciated. Thank you.
Hello Akella,
You can view the Post Installation steps involved in PI 7.0 in the template installer under
http://servername:50xx0/nwa
Also refer this
PI(XI 7.0) configuration guides
Regarding SAP PI 7.0 Configuration
Just Installed PI
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
regards,
Anandh -
Post Installation for PI Usage
We are unable to run the POSTINSTALL steps of technical configuration for the PI usage at the NETWEAVER Administration -> Deploy and Change. As such, during configuration of the PI, there was Integration Server for selection.
We know the reason why the post installation did not successfully completed. The reason was that the SLD was previous pointing to another SLD port 50100. We have since corrected the port (50000) in all the configurations but during this step (POST INSTALL for PI Usage) it still points to the incorrect port.
How can we change the port for this PostInstall process in the Deploy and Change? If not, is there a manual step to complete this operation.
I have include the steps to this error:
(A) Post Installation for PI Usage
1. Start brower http://calypso:50600/nwa
2. Deploy and Change
3. Select "PI_00 This wizard will execute the PostInstall Steps for technical configuration for PI Usage"
4. The Error pops at "Step26/142 Add Installed Product2" (because the port was set to point to 50100 instead of correct 50000). Note that the port was since corrected, and in all configuration for SLD in VA, REP, is all showing correct port number already.PiPostInstallProcess
hope it helps -
Post installation for Portal and errors for new system
I've recently installed a NW 7 based ABAPJAVA System with Portal Components (EPEP Core) on Windows + Oracle for demo.
1 ) Since, I am facing a lot of errors after the installation, I think I have missed to carry out some post-install steps. Can someone please suggest on the post-installation steps in some detail ??
2) When I try to open the newly installed portal using http://fqdn_host:50000/irj ; the browser shows some exception has occurred: However, I tried to restart the system (everything including db) as suggested in some of the other links and login went fine.
After I logged in to the portal (/irj) as j2ee_admin; I am trying to open Content Administration --> Portal Content OR System Administration -> Transport OR --> System Configuration etc ; but I am getting the error coded below::
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.innerpage/com.sap.portal.layoutPortal1_WAandNavPanel
Component Name : com.sap.portal.layouts.framework.WAandNavPanel
Error occurs during the rendering of jsp component.
Exception id: 05:05_25/03/10_0032_7012350
See the details for the exception ID in the log file
The log file (that I believe is the trace file in cluster/server0/log/defaultTrace.0.trc) says (This gives several such exceptions listed in the file.) (I'll put the log as a comment to the post because of the limit on max characters)
Note that the link http://punitp84712d:50000/nwa works absolutely fine. PFB the J2EE process details.
J2EE Process Details
Name Type PID Status Debug
Dispatcher ID7012300 J2EE Dispatcher 3,240 Running Disabled
SDM SDM Server 4,736 Running Switched off
Server0 ID7012350 J2EE Server 596 Running Disabled
Can someone please help me through this and let me know how did you draw your inference. Let me know if there is any other place that can give me more information / logs on the error.
Thanks,Hi Jay,
Please check that server is Running but not able to open some application. I would suggest to check the Enviromental Variable for My Computer :-
- Database Enviromental variable is added or not under "user vairable for <UserID for Server Desktop>
- Check JAVA_HOME Enviromental variable is added or not under "System Variable'
Check at (My computer > Properties >> Advance >> Startup and Recovery >> Enviromental Variable >> System Variables/User varaible
Update your server IP address and host name in host file entry at (RUN > drivers > etc > host file) and check database server services (Run > Services.msc >> Start your database services manually and change prperties as automatic)
Then try to open portal URL http://<Host>:<Port>/irj/portal or http://<Host>:<Port>/index.html
Hope it helps
Regards
Arun -
Hi All,
I have installed ECC 6.0. I have added XI component also. Now i need to perform post installation steps for XI alone. i have downloaded the NW7 installation Guide MAXDB. is that enough? or should i need more documents....
Also, i found out a document for post installation guide system landscape directory of SAP Netweaver 7.0....
Which one should i follow?
Please clarify....
Thanks in advance,
MadhukarHi madhukar !!
Is this what you are looking for:
https://websmp103.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Also check this thread..
Re: XI INSTALLATION and POSTINSTALLATION
those describe din XI installation and configuration guides:
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
check this thread for SLD configuration soon after XI installation
SLD configuration
Check this link also it has the procedure.
http://help.sap.com/saphelp_nw2004s/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
Here is the guide with necessary steps
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
You will get the details of post installation activities for SAP XI in its installation guides itself. Have a look:
SAP Exchange Infrastructure Release 3.0 - Installation Guide
SAP Exchange Infrastructure 3.0 SR1 - Installation Guide
Plus you can go through the following docs:
SAP Exchange Infrastructure (XI) 3.0
Troubleshooting Guide - SAP XI 3.0 and 2.0
SAP XI Release 3.0 SPS11Configuration Guide
Also you can have a look at the following thread, you will get some links in these threads too:
Post installation of XI?
XI INSTALLATION and POSTINSTALLATION
XI Post Installation....Need help...
XI Post Installation - Help
XI Post Installation - SLD Connection
Post Installation of PI - PI template Installer not found
Pls reward if useful -
Post Installation for SCOM 2012 R2 !
Hello,
I am new to SCOM 2012 R2, I have just installed in our environment and added 1 SQL and 1 SharePoint 2013 Server for monitoring. I downloaded Management packs for those.
However, I can see SQL Server is in monitoring state but not SharePoint 2013 Server.
Under the SharePoint >Administration, Microsoft SharePoint Farm group this option is NOT Monitoring.
Is there anything else I need to do ?
Kindly help me.
BR.Hi,
Did you read the 'system_center_monitoring_pack_guide_for_microsoft_sharepoint_server_2013.docx' before import?
System Center Management Pack for SharePoint Server 2013
http://www.microsoft.com/en-us/download/details.aspx?id=35590
Page 3:
Prerequisite
• You must install the System Center Monitoring Pack for SharePoint Foundation 2013 before installing this Management Pack.
• Read the System Center Monitoring Pack guide for Microsoft SharePoint Foundation 2013 before deploying this management pack.
• Download the System Center Monitoring Pack for SharePoint Server 2013 from the System Center Pack Catalog.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Post Installation check for 12.1.1
i am installing 12.1.1 (32 bit) on oel 5 (32 bit), one of the package gnome-libs-1.4.1.2.90-34.1.i386 for OEL 5 (32 bit) creating an issue at post installation for HTTP server not opening
when i check the HTTP server status i found
[oracle@test scripts]$ adapcctl.sh status
You are running adapcctl.sh version 120.7.12010000.2
Checking status of OPMN managed Oracle HTTP Server (OHS) instance ...
Processes in Instance: VIS_test.test.parazelsus.pk
---------------------------------+--------------------+---------+---------
ias-component | process-type | pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group | OC4J:oafm | 10722 | Alive
OC4JGroup:default_group | OC4J:forms | 10654 | Alive
OC4JGroup:default_group | OC4J:oacore | 10572 | Alive
HTTP_Server | HTTP_Server | N/A | Down Upon checking logfile
11/04/18 07:43:44 Start process
/appshome/oracle/VIS/inst/apps/VIS_test/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd
/appshome/oracle/VIS/apps/tech_st/10.1.3/Apache/Apache/bin/httpd: error while loading shared libraries: libdb.so.2: cannot open shared object file: No such file or directoryi got a resolution for above issue from metalink 735605.1 to install one of the rpm gnome-libs-1.4.1.2.90-34.1.i386 , when i try to install it i got following dependencies error.
Missing Dependency: libORBitutil.so.0 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Missing Dependency: ORBit is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Missing Dependency: libgdk_imlib.so.1 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Missing Dependency: imlib is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Missing Dependency: libORBit.so.0 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Missing Dependency: libIIOP.so.0 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Missing Dependency: libpng.so.2 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Missing Dependency: libORBitCosNaming.so.0 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)where can i get these rpms , such exact named rpm is not googling with its exact name , is there any alternate to solve that issue.
libORBitutil.so.0
ORBit
libgdk_imlib.so.1
imlib
libORBit.so.0
libIIOP.so.0
libpng.so.2
libORBitCosNaming.so.0[oracle@test appshome]$ yum install gnome-libs-1.4.1.2.90-34.1.i386.rpm
Loaded plugins: rhnplugin, security
*Note* Unbreakable Linux Network repositories are not listed below. You must run this command as root to access ULN repositories.
You need to be root to perform this command.
[oracle@test appshome]$ su - root
Password:
[root@test ~]#
[root@test ~]# cd /appshome/
[root@test appshome]# yum install gnome-libs-1.4.1.2.90-34.1.i386.rpm
Loaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
Setting up Install Process
Examining gnome-libs-1.4.1.2.90-34.1.i386.rpm: 1:gnome-libs-1.4.1.2.90-34.1.i386
Marking gnome-libs-1.4.1.2.90-34.1.i386.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package gnome-libs.i386 1:1.4.1.2.90-34.1 set to be updated
*--> Processing Dependency: imlib for package: gnome-libs*
*--> Processing Dependency: libgdk_imlib.so.1 for package: gnome-libs*
*--> Processing Dependency: libpng.so.2 for package: gnome-libs*--> Finished Dependency Resolution
1:gnome-libs-1.4.1.2.90-34.1.i386 from /gnome-libs-1.4.1.2.90-34.1.i386 has depsolving problems
--> Missing Dependency: libgdk_imlib.so.1 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
1:gnome-libs-1.4.1.2.90-34.1.i386 from /gnome-libs-1.4.1.2.90-34.1.i386 has depsolving problems
--> Missing Dependency: imlib is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
1:gnome-libs-1.4.1.2.90-34.1.i386 from /gnome-libs-1.4.1.2.90-34.1.i386 has depsolving problems
--> Missing Dependency: libpng.so.2 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Error: Missing Dependency: libgdk_imlib.so.1 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Error: Missing Dependency: libpng.so.2 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Error: Missing Dependency: imlib is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va --nofiles --nodigest
The program package-cleanup is found in the yum-utils package. -
Problem in XI after post installation.
I have done the post installation for PI, everything was fine and sucessfull,
but the problem is, in XI check list there is no objects found in the Integration Repository and Integration Directory with the URL ( http:
emsap008:50100\rep\start\index.asp ).
Let me explain the problem which i faced.
In the transaction SXMB_IFR --> Tool --> Import Design Objects Option, the result displaied is " There is no Objects found ". But as per the document i need to get " PI7_0_BASIS_6.40_18_00.tpz ".
Please clarify my doubt, ask me if my question is insuffecient.Hi Senthil !!
Here is the guide with necessary steps
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
You will get the details of post installation activities for SAP XI in its installation guides itself. Have a look:
SAP Exchange Infrastructure Release 3.0 - Installation Guide
SAP Exchange Infrastructure 3.0 SR1 - Installation Guide
Plus you can go through the following docs:
SAP Exchange Infrastructure (XI) 3.0
Troubleshooting Guide - SAP XI 3.0 and 2.0
SAP XI Release 3.0 SPS11Configuration Guide
Also you can have a look at the following thread, you will get some links in these threads too:
Post installation of XI?
XI INSTALLATION and POSTINSTALLATION
XI Post Installation....Need help...
XI Post Installation - Help
XI Post Installation - SLD Connection
refre this thread
Post Installation of PI - PI template Installer not found
<b>Pls rewards if useful</b> -
Wsus server 2012 r2 fails to launch post-installation task
wsus server 2012 r2 faild to launch post-installation task
please help i attach a photo with log , this is a brend new domain contoroller of a brand new domain.
i installed th wsus from server manager .
this is the log :
2014-05-01 13:17:51 Postinstall started
2014-05-01 13:17:51 Detected role services: UI, WidDatabase, Services
2014-05-01 13:17:51 Start: LoadSettingsFromXml
2014-05-01 13:17:51 Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentLocal
2014-05-01 13:17:51 System.TypeInitializationException: The type initializer for 'Microsoft.UpdateServices.Internal.UtilConstants' threw an exception. ---> System.IO.InvalidDataException: Invalid installation directory
at Microsoft.UpdateServices.Internal.SetupInfo.GetInstallDirectory()
at Microsoft.UpdateServices.Internal.UtilConstants..cctor()
--- End of inner exception stack trace ---
at Microsoft.UpdateServices.Administration.PostInstall.GetConfigValue(String filename, String item)
at Microsoft.UpdateServices.Administration.PostInstall.LoadSettingsFromXml()
at Microsoft.UpdateServices.Administration.PostInstall.Initalize(Parameters parameters)
at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
Fatal Error: The type initializer for 'Microsoft.UpdateServices.Internal.UtilConstants' threw an exception.the installion location is the default installion path - C:\Program Files\Update Services
the content folder was directed to a diffrent volume - e:\wsus\
i tried to delete everything that connected to iis and wsus and re install and now i am getting:
2014-05-05 12:05:33 Postinstall started
2014-05-05 12:05:33 Detected role services: UI, WidDatabase, Services
2014-05-05 12:05:33 Start: LoadSettingsFromXml
2014-05-05 12:05:33 Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentLocal
2014-05-05 12:05:33 System.TypeInitializationException: The type initializer for 'Microsoft.UpdateServices.Internal.UtilConstants' threw an exception. ---> System.IO.InvalidDataException: Invalid installation directory
at Microsoft.UpdateServices.Internal.SetupInfo.GetInstallDirectory()
at Microsoft.UpdateServices.Internal.UtilConstants..cctor()
--- End of inner exception stack trace ---
at Microsoft.UpdateServices.Administration.PostInstall.GetConfigValue(String filename, String item)
at Microsoft.UpdateServices.Administration.PostInstall.LoadSettingsFromXml()
at Microsoft.UpdateServices.Administration.PostInstall.Initalize(Parameters parameters)
at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
Fatal Error: The type initializer for 'Microsoft.UpdateServices.Internal.UtilConstants' threw an exception. -
Post - Installation SAP R/3 4.7 - Urgent !!
Hi All,
I have installed SAP R/3 4.7. I would like to know what are the post-installation steps involved in it. I went through the installation guide. But, I am not able to understand the details provided in that. Can somebody tell me what are all the steps involved as a part of the post installation.
Kindly Help !!! Its urgent !!
Regards,
Rose.Hi,
Initial Consistency Check
SM28
Edit Batch Jobs
Workbench Organizer Reconfiguration
TMS Configuration
Import Printers
Client Configuration
SCC4
Set System Change Option
SE06
STMS
SCC7
SM37
Deleting Source System Profiles
RZ10
Reconfigure Operation Modes
RZ04
Delete Update Failures
SM13
Delete Batch Input Sessions
SM35
Reorganize Spool
SPAD
SP12
Delete Invalid Background Control Objects
Restrict Outgoing Email and Faxes
SCOT
Adjust RFC connections.
SM59
Adjust Logical Systems names
SALE
Hope this helps.
Cheeers
Deepanshu -
DB2 Post installation after EHP4 Installation
Hi,
I have completed ehp4 installation in db2 9.1 fp7 database windows 2008 server.What are the post installation activities i should do?
I have read in the doc where they have given so many post installations.ie post activities before resuming production etc etc..
But i felt like deleting the old table spaces is important for which they have given the syntax(db2 clp command) also.but if i run that "0 rows selected".pls tell me what is the correct syntax for deleeting old table spaces.
and also pls let me know what other i need to do after ehp4 installation from your experience.
ThanksHi Sunny,
Thanks for your reply.
Bur the link you have given,is the common for db2 to delete the table spaces.But I need for the post installation for ehp4 in db2.
for deleting the table spaces,I need to know which are the old table spaces after upgrade for which there is a syntax given in the master guide.below are given in the master guide.
Deleting Substitution Tablespaces
After the enhancement package installation, some tablespaces are no longer used and you can delete them.
To determine the names of these empty substitution tablespaces of the source release enter the following db2 clp command:
db2 "select tbspace from syscat.tablespaces TS where TS.tbspace like '%E%<rel>%' and not exists ( select 1 from syscat.tables where tbspace = TS.tbspace or index_tbspace = TS.tbspace or long_tbspace = TS.tbspace )"
To delete all obsolete tablespaces that are returned by the above mentioned db2 clp command, enter the following db2 clp command at the operating system level for each tablespace listed:
but if i execute no rows selected.
so pls guide me how to do. -
Hi all,
I installed netweaver 2004s sr2 and i selected the usage type at the time of installation by mentioning BI.
Now what i want to know is that should i want to do any post installation in BI.
If it so what are things i want to do.
I did a psot instlalation for XI and now its working fine.Similarly i want to know about post installation for BI
Regards
VijayHello,
use the template installer (http://<server>:<port>/nwa) or transaction rspor_setup.
Greetings
Thomas -
Help needed for BI post installation
Dear All,
I have installed a SAP BI server. I have been told by my BI team that I need to define source systems in it. Also, I learnt that there are some BI related basis activities.
Can anyone please list out those??
regards, Sean.Hi,
In order to define source system in BW check the links below.
Connection between Source Systems and BW
http://help.sap.com/saphelp_nw70/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Creating SAP Source Systems
http://help.sap.com/saphelp_nw70/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
BW connectivity(.doc)
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
For post installation activities check the link below.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=bwpostinstallation+&adv=false&sortby=cm_rnd_rankvalue
Regards. -
Oracle 9i AS post installation help
Hi all,
I had installed the Oracle 9i Infrastructure and Application server successfully on Win2000. Tested the services and demo forms. I Need to know post installation configuration details and steps on how to deploy the forms and reports into it. Thankful if you can provide some help on this.
regards,
SampathAhter installing ias successfully
you can be able to Apache start/stop ,Forms and Reports server sample application ,and lot's of other stuff under oracle-iSuits.
For example if you want to see the Apache main page start the server and in the browser page type the host name you can see the links.
null -
Need Post installation configuration guide for PI 7.0
Hi,
Does anybody have Post installation configuration guide for PI 7.0 ?
Our basis team has installed PI 7.0.
Now we need to do the post installation.
Do we need to do all configuration steps we use to do for XI 3.0 or is it different in PI 7.0.
Your help appreciated.
Thanks,
VinodHI,
See the below links
Post Installation steps for activating Adobe Document Services in SAP XI NW 2004S
-/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
Link for posnt installation guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
Regards
Chilla
Maybe you are looking for
-
Whenever I click on a song or video in my library and I try to play it, and exclamation point immediately pops up and it tells me that my song or video's origional file cannot be located. It has happened to over 100 of my songs and I would like to kn
-
IMAP alerts not being processed?
I recently went near storage quota on my IMAP account (they use CIRUS server software) and the server sent notifications via the IMAP alert facility. These were not processed by the iPhone or Mavericks Mail. As a result the account went over quota
-
I need to reverse the command and let the computer use Windows to search the program I want to use t
I am not sure if you can help me. I need to command my computer to look for a program that is most suited to open files automatically. I accidentally check the mannual mode and appointed Adobe Reader x to be the designated program. Now nothing wil
-
Output results to more columns...
Hi! I have problem, for which I didn't find solution yet. I have query and this query returns the unknown count of rows (this row count is unknown in time of developing). I would like output results of this query to more than one result column to the
-
Is there any way to tell what song files are in your iTunes music folder but are not in iTunes? I often delete podcasts, etc., from within iTunes and occasionally miss the "send file to trash" button when confirming. As a result, I likely have some g