Post Installation for PI Usage

We are unable to run the POSTINSTALL steps of technical configuration for the PI usage at the NETWEAVER Administration -> Deploy and Change. As such, during configuration of the PI, there was Integration Server for selection.
We know the reason why the post installation did not successfully completed. The reason was that the SLD was previous pointing to another SLD port 50100. We have since corrected the port (50000) in all the configurations but during this step (POST INSTALL for PI Usage) it still points to the incorrect port.
How can we change the port for this PostInstall process in the Deploy and Change? If not, is there a manual step to complete this operation.
I have include the steps to this error:
(A) Post Installation for PI Usage
1. Start brower http://calypso:50600/nwa
2. Deploy and Change
3. Select "PI_00 This wizard will execute the PostInstall Steps for technical configuration for PI Usage"
4. The Error pops at "Step26/142 Add Installed Product2" (because the port was set to point to 50100 instead of correct 50000). Note that the port was since corrected, and in all configuration for SLD in VA, REP, is all showing correct port number already.

PiPostInstallProcess
hope it helps

Similar Messages

Post Installation for SAP PI 7.0

I have done installation and post installation for SAP XI 3.0. Now I am trying to do the same with SAP PI 7.0. I am done with the installation. Presently working on Postinstallation. I believe this is not similar to SAP XI 3.0 ? Please let me know what are the difference in the Postinstallation between these two and also any links or documents for SAP PI 7.0 will be appreciated. Thank you.

Hello Akella,
You can view the Post Installation steps involved in PI 7.0 in the template installer under
http://servername:50xx0/nwa
Also refer this
PI(XI 7.0) configuration guides
Regarding SAP PI 7.0 Configuration
Just Installed PI
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
regards,
Anandh

Post-installation for BW, help

Hi
this is min from india and i want help on steps for the post installation for BW 3.1. i cant work in rsa1 as told in groups i have done the client copy and kept the default profile still i cant work in that rsa1.some where i am doing the mistake can any one plz tell the post installation steps plzz its urgent to me
thanks

HI:
The real problem is that you have installed a version that is about to go out of maintenance at the end of this year. It does not make sense to use 3.1 for a new installation. If you are performing a new installation, it is recommended to utilize the current version, SAP NetWeaver BI 2004s. If for some reason you are unable to install the current version, at the very least install the 3.5 version.
Please see this area:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000632586&
If you persist with your (ill-adivsed) new installation of 3.1, and this problem continues, please provide the exact error message that you receive when you attempt to go into RSA1.
Best Regards -
Ron Silberstein
SAP

Post installation for Portal and errors for new system

I've recently installed a NW 7 based ABAPJAVA System with Portal Components (EPEP Core) on Windows + Oracle for demo.
1 ) Since, I am facing a lot of errors after the installation, I think I have missed to carry out some post-install steps. Can someone please suggest on the post-installation steps in some detail ??
2) When I try to open the newly installed portal using http://fqdn_host:50000/irj ; the browser shows some exception has occurred: However, I tried to restart the system (everything including db) as suggested in some of the other links and login went fine.
After I logged in to the portal (/irj) as j2ee_admin; I am trying to open Content Administration --> Portal Content OR System Administration -> Transport OR --> System Configuration etc ; but I am getting the error coded below::
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.innerpage/com.sap.portal.layoutPortal1_WAandNavPanel
Component Name : com.sap.portal.layouts.framework.WAandNavPanel
Error occurs during the rendering of jsp component.
Exception id: 05:05_25/03/10_0032_7012350
See the details for the exception ID in the log file
The log file (that I believe is the trace file in cluster/server0/log/defaultTrace.0.trc) says (This gives several such exceptions listed in the file.) (I'll put the log as a comment to the post because of the limit on max characters)
Note that the link http://punitp84712d:50000/nwa works absolutely fine. PFB the J2EE process details.
J2EE Process Details
Name Type PID Status Debug
Dispatcher ID7012300 J2EE Dispatcher 3,240 Running Disabled
SDM SDM Server 4,736 Running Switched off
Server0 ID7012350 J2EE Server 596 Running Disabled
Can someone please help me through this and let me know how did you draw your inference. Let me know if there is any other place that can give me more information / logs on the error.
Thanks,

Hi Jay,
Please check that server is Running but not able to open some application. I would suggest to check the Enviromental Variable for My Computer :-
- Database Enviromental variable is added or not under "user vairable for <UserID for Server Desktop>
- Check JAVA_HOME Enviromental variable is added or not under "System Variable'
Check at (My computer > Properties >> Advance >> Startup and Recovery >> Enviromental Variable >> System Variables/User varaible
Update your server IP address and host name in host file entry at (RUN > drivers > etc > host file) and check database server services (Run > Services.msc >> Start your database services manually and change prperties as automatic)
Then try to open portal URL http://<Host>:<Port>/irj/portal or http://<Host>:<Port>/index.html
Hope it helps
Regards
Arun

Post installation for XI

Hi All,
I have installed ECC 6.0. I have added XI component also. Now i need to perform post installation steps for XI alone. i have downloaded the NW7 installation Guide MAXDB. is that enough? or should i need more documents....
Also, i found out a document for post installation guide system landscape directory of SAP Netweaver 7.0....
Which one should i follow?
Please clarify....
Thanks in advance,
Madhukar

Hi madhukar !!
Is this what you are looking for:
https://websmp103.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Also check this thread..
Re: XI INSTALLATION and POSTINSTALLATION
those describe din XI installation and configuration guides:
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
check this thread for SLD configuration soon after XI installation
SLD configuration
Check this link also it has the procedure.
http://help.sap.com/saphelp_nw2004s/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
Here is the guide with necessary steps
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
You will get the details of post installation activities for SAP XI in its installation guides itself. Have a look:
SAP Exchange Infrastructure Release 3.0 - Installation Guide
SAP Exchange Infrastructure 3.0 SR1 - Installation Guide
Plus you can go through the following docs:
SAP Exchange Infrastructure (XI) 3.0
Troubleshooting Guide - SAP XI 3.0 and 2.0
SAP XI Release 3.0 SPS11Configuration Guide
Also you can have a look at the following thread, you will get some links in these threads too:
Post installation of XI?
XI INSTALLATION and POSTINSTALLATION
XI Post Installation....Need help...
XI Post Installation - Help
XI Post Installation - SLD Connection
Post Installation of PI - PI template Installer not found
Pls reward if useful

Post Installation for SCOM 2012 R2 !

Hello,
I am new to SCOM 2012 R2, I have just installed in our environment and added 1 SQL and 1 SharePoint 2013 Server for monitoring. I downloaded Management packs for those.
However, I can see SQL Server is in monitoring state but not SharePoint 2013 Server.
Under the SharePoint >Administration, Microsoft SharePoint Farm group this option is NOT Monitoring.
Is there anything else I need to do ?
Kindly help me.
BR.

Hi,
Did you read the 'system_center_monitoring_pack_guide_for_microsoft_sharepoint_server_2013.docx' before import?
System Center Management Pack for SharePoint Server 2013
http://www.microsoft.com/en-us/download/details.aspx?id=35590
Page 3:
Prerequisite
• You must install the System Center Monitoring Pack for SharePoint Foundation 2013 before installing this Management Pack.
• Read the System Center Monitoring Pack guide for Microsoft SharePoint Foundation 2013 before deploying this management pack.
• Download the System Center Monitoring Pack for SharePoint Server 2013 from the System Center Pack Catalog.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Post Installation check for 12.1.1

i am installing 12.1.1 (32 bit) on oel 5 (32 bit), one of the package gnome-libs-1.4.1.2.90-34.1.i386 for OEL 5 (32 bit) creating an issue at post installation for HTTP server not opening
when i check the HTTP server status i found
[oracle@test scripts]$ adapcctl.sh status
You are running adapcctl.sh version 120.7.12010000.2
Checking status of OPMN managed Oracle HTTP Server (OHS) instance ...
Processes in Instance: VIS_test.test.parazelsus.pk
---------------------------------+--------------------+---------+---------
ias-component                    | process-type       |     pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group          | OC4J:oafm          |   10722 | Alive
OC4JGroup:default_group          | OC4J:forms         |   10654 | Alive
OC4JGroup:default_group          | OC4J:oacore        |   10572 | Alive
HTTP_Server                      | HTTP_Server        |     N/A | Down    Upon checking logfile
11/04/18 07:43:44 Start process
/appshome/oracle/VIS/inst/apps/VIS_test/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd
/appshome/oracle/VIS/apps/tech_st/10.1.3/Apache/Apache/bin/httpd: error while loading shared libraries: libdb.so.2: cannot open shared object file: No such file or directoryi got a resolution for above issue from metalink 735605.1 to install one of the rpm gnome-libs-1.4.1.2.90-34.1.i386 , when i try to install it i got following dependencies error.
Missing Dependency: libORBitutil.so.0 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Missing Dependency: ORBit is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Missing Dependency: libgdk_imlib.so.1 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Missing Dependency: imlib is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Missing Dependency: libORBit.so.0 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Missing Dependency: libIIOP.so.0 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Missing Dependency: libpng.so.2 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Missing Dependency: libORBitCosNaming.so.0 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)where can i get these rpms , such exact named rpm is not googling with its exact name , is there any alternate to solve that issue.
libORBitutil.so.0
ORBit
libgdk_imlib.so.1
imlib
libORBit.so.0
libIIOP.so.0
libpng.so.2
libORBitCosNaming.so.0

[oracle@test appshome]$ yum install gnome-libs-1.4.1.2.90-34.1.i386.rpm
Loaded plugins: rhnplugin, security
*Note* Unbreakable Linux Network repositories are not listed below. You must run this command as root to access ULN repositories.
You need to be root to perform this command.
[oracle@test appshome]$ su - root
Password:
[root@test ~]#
[root@test ~]# cd /appshome/
[root@test appshome]# yum install gnome-libs-1.4.1.2.90-34.1.i386.rpm
Loaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
Setting up Install Process
Examining gnome-libs-1.4.1.2.90-34.1.i386.rpm: 1:gnome-libs-1.4.1.2.90-34.1.i386
Marking gnome-libs-1.4.1.2.90-34.1.i386.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package gnome-libs.i386 1:1.4.1.2.90-34.1 set to be updated
*--> Processing Dependency: imlib for package: gnome-libs*
*--> Processing Dependency: libgdk_imlib.so.1 for package: gnome-libs*
*--> Processing Dependency: libpng.so.2 for package: gnome-libs*--> Finished Dependency Resolution
1:gnome-libs-1.4.1.2.90-34.1.i386 from /gnome-libs-1.4.1.2.90-34.1.i386 has depsolving problems
--> Missing Dependency: libgdk_imlib.so.1 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
1:gnome-libs-1.4.1.2.90-34.1.i386 from /gnome-libs-1.4.1.2.90-34.1.i386 has depsolving problems
--> Missing Dependency: imlib is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
1:gnome-libs-1.4.1.2.90-34.1.i386 from /gnome-libs-1.4.1.2.90-34.1.i386 has depsolving problems
--> Missing Dependency: libpng.so.2 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Error: Missing Dependency: libgdk_imlib.so.1 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Error: Missing Dependency: libpng.so.2 is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
Error: Missing Dependency: imlib is needed by package 1:gnome-libs-1.4.1.2.90-34.1.i386 (/gnome-libs-1.4.1.2.90-34.1.i386)
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
                        package-cleanup --dupes
                        rpm -Va --nofiles --nodigest
The program package-cleanup is found in the yum-utils package.

Bi post installation

Hi all,
I installed netweaver 2004s sr2 and i selected the usage type at the time of installation by mentioning BI.
Now what i want to know is that should i want to do any post installation in BI.
If it so what are things i want to do.
I did a psot instlalation for XI and now its working fine.Similarly i want to know about post installation for BI
Regards
Vijay

Hello,
use the template installer (http://<server>:<port>/nwa) or transaction rspor_setup.
Greetings
Thomas

Problem in XI after post installation.

I have done the post installation for PI, everything was fine and sucessfull,
but the problem is, in XI check list there is no objects found in the Integration Repository and Integration Directory with the URL ( http:
emsap008:50100\rep\start\index.asp ).
Let me explain the problem which i faced.
In the transaction SXMB_IFR --> Tool --> Import Design Objects Option, the result displaied is " There is no Objects found ". But as per the document i need to get " PI7_0_BASIS_6.40_18_00.tpz ".
Please clarify my doubt, ask me if my question is insuffecient.

Hi Senthil !!
Here is the guide with necessary steps
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
You will get the details of post installation activities for SAP XI in its installation guides itself. Have a look:
SAP Exchange Infrastructure Release 3.0 - Installation Guide
SAP Exchange Infrastructure 3.0 SR1 - Installation Guide
Plus you can go through the following docs:
SAP Exchange Infrastructure (XI) 3.0
Troubleshooting Guide - SAP XI 3.0 and 2.0
SAP XI Release 3.0 SPS11Configuration Guide
Also you can have a look at the following thread, you will get some links in these threads too:
Post installation of XI?
XI INSTALLATION and POSTINSTALLATION
XI Post Installation....Need help...
XI Post Installation - Help
XI Post Installation - SLD Connection
refre this thread
Post Installation of PI - PI template Installer not found
<b>Pls rewards if useful</b>

DB2 Post installation after EHP4 Installation

Hi,
I have completed ehp4 installation in db2 9.1 fp7 database windows 2008 server.What are the post installation activities i should do?
I have read in the doc where they have given so many post installations.ie post activities before resuming production etc etc..
But i felt like deleting the old table spaces is important for which they have given the syntax(db2 clp command) also.but if i run that "0 rows selected".pls tell me what is the correct syntax for deleeting old table spaces.
and also pls let me know what other i need to do after ehp4 installation from your experience.
Thanks

Hi Sunny,
Thanks for your reply.
Bur the link you have given,is the common for db2 to delete the table spaces.But I need for the post installation for ehp4 in db2.
for deleting the table spaces,I need to know which are the old table spaces after upgrade for which there is a syntax given in the master guide.below are given in the master guide.
Deleting Substitution Tablespaces
After the enhancement package installation, some tablespaces are no longer used and you can delete them.
To determine the names of these empty substitution tablespaces of the source release enter the following db2 clp command:
db2 "select tbspace from syscat.tablespaces TS where TS.tbspace like '%E%<rel>%' and not exists ( select 1 from syscat.tables where tbspace = TS.tbspace or index_tbspace = TS.tbspace or long_tbspace = TS.tbspace )"
To delete all obsolete tablespaces that are returned by the above mentioned db2 clp command, enter the following db2 clp command at the operating system level for each tablespace listed:
but if i execute no rows selected.
so pls guide me how to do.

Post installation steps for EP 7.0

Hi All,
I have installed EP 7.0 SR1 on windows with Oracle and its successful. (I have selected usage types Java and EP during installation).
As per the installation guide its said to login as below:
http://<hostname>:50100/irj --> but when i open it, it says The requested resource does not exist. But i am able to open normal NW page: http://<hostname>:50100 and access UME, SAP NW Administrator>..
I have applied permanent license in Visual Administrator. but didnt do any of the post installation steps. I didnt see any of the post installation step in guide also, could you please guide me in completing this?
Thanks,
Subbu

Hi All,
Thanks for ur response, i am able to open the portal by giving the address as u mentioned..thank u..But i am facing problem as i couldnt see some options: I read the following in help.sap.com
When you install a portal, you also install predefined system templates for all the connectors that the portal provides. These templates are contained in the System Landscape Templates folder, under
System Administration--> System Configuration --> Portal Content --> Templates
, and can be edited in the Property Editor. Editing a template affects any systems that you create based on this template
I am able to navigate System Administration--> System Configuration but not able to see the option
Portal Content --> Templates
The other point mentioned is:
The system administrator can disable logon by means of the IP address as follows:
Navigate to System Administration --> System Configuration -->
Service Configuration
. i m not able to find the option Service Configuration here??
I have installed NW 2004s SR1, in help.sap.com they didnt mention anything specific abt. release. Could you please guide me why i am missing those options??
Thanks,
Subbu

SCM Dialog instance installation, post installation activity for livecache

Hi All,
We have installed SCM 7.0 Central instance with Livecache server. Now we have successfully installed additional application server (i.e. Dialog instance) for this SCM 7.0 system.
We need to know
After installation of SCM 7.0 Dialog instance what are the post installation activities?
How we should integrate the livecache server with the Dialog instance which is installed on different hardware.
We need to know how livecache server understand that the additonal application server ? Is there anything to do in LC10?
Please reply
Thanks

Hi Ashley,
Thanks for your time.
Since i am installing app server, the SAP<SID> group will have to be online on this node. There is another group containing shared drives for components for livecache. This is also required to be online on node 2 for app server installation.
The only cluster resource I can move back to node 1 is ORACLE<SID>. Tried doing that, but no luck.
Any one here facing similar issue during SCM dialog instance installation in MSCS environment?
Regards,
Kiran

POST Installation steps for SAP XI 7.0 SP06

Hi Experts ,
We are trying to install XI 7.0 SP06.We are suppose to carry out post installation
steps but we are not able to locate a proper post installation guide for the same.
We have succesfully installed XI 3.0 earlier .However XI 7.0 post installation steps in the guide that we have "SAP NetWeaver 2004s SR1 ABAP+Java on Windows: Oracle" , are relatively less...
Nevertheless, we have carried out the following steps
5.21.1 Performing PI-Specific Steps for SLD Configuration
Local and Central System Landscape Directory (SLD)
Mapping Security Role to User
1. Log on to the Visual Administrator of the J2EE engine of the SLD host.
2. Choose Cluster® Server® Services® Security Provider.
3. In the Runtime tab, choose Policy Configurations and then the column Components, and select the component
sap.com/com.sap.lcr*sld.
4. Switch to the Security Roles tab to display the assigned roles.
5. Select role LcrInstanceWriterLD.
The user SLDAPIUSER already exists with its security role LcrInstanceWriterLD.
6. Switch to edit mode and add user PIAPPLUSER with the same role LcrInstanceWriterLD.
Note
For a central SLD, the user PIAPPLUSER must be created in the central SLD ABAP system first and be
assigned to ABAP role SAP_XI_APPL_SERV_USER. The password must be same as in the XI Exchange
Profile on the XI Integration Server.
Note
For information on the UME actions, see the Post-Installation Guide - SLD of SAP NetWeaver 2004s, section
Configuring SLD Security, at service.sap.com/sld® Media Library.
Maintaining SLD Connection Parameters (ABAP API)
1. Log on to the SAP XI Integration Server System as user DDIC and call transaction SLDAPICUST. The screen
Maintain SLD Access Data is displayed.
2. Choose Display <-> Change and proceed as follows:
a) Replace the existing SLDAPIUSER with PIAPPLUSER user.
Note
For a central SLD, make sure you use the user with security role LcrInstanceWriterLD.
b) Make sure your entry is marked as Primary.
Note
Only the entry marked as Primary is active.
c) Save your settings.
April 10, 2006 PUBLIC 97
Now we don't know wether the sld configuration is over or not ...or for that matter in RWB we see only J2se based adapter engine and not J2ee based adapter engine...
Kindly help

Hi..
Instaed doing this,please try out template based configuration which has been mentioned in the installation guide or else do as follows
1.Login into NWA (netweaver administrator)
as
http://<host.<domain>.<com>:<port>/nwa
2.Use J2ee_admin user id and password
3.go to deploy and change
4.select template based configuration for PI
5.execute the template
6.install it
you can find the list of other templates which are clear and easy to do the post installation step..i found it useful ..
Apart from these, as per sandro, you can check the data transfer in visual administrator or go the abap engine, transaction RZ70, press accept proposal button
then execute button , check the data supply without any error
Thanks
Gopal
(Avoid points if useful)

Post installation Steps for SAP XI

Hi,
I am doing post installation steps for SAP_XI, for the step "Generating roles for SAP_XI and SAP_SLD in transaction PFCG, when I enter Role: "SAP_XI*" then its not generating any roles it is giving message "No roles found in the selected area" Please suggest
Thanks,
Nishant

Create user in SAP XI and then assign them role
Create user using SU01 transaction. Enter the username and click on the first button (create).
Follow the process below
1. Address Tab
Enter the user details
2. Logon Data Tab
Enter the initial password. Make sure user type is Dialog (it is by default).
3. Roles Tab
SAP_XI_DEVELOPER
SAP_SLD_DEVELOPER
SAP_XI_MONITOR
(if the user is admin give the admin roles)
Before logging on to the Integration Builder, logon to ABAP stack (SAPGUI frontend on windows or java) at least once. Then logon to Int.Builder components.
regards
Dharamveer

Need Post installation configuration guide for PI 7.0

Hi,
Does anybody have Post installation configuration guide for PI 7.0 ?
Our basis team has installed PI 7.0.
Now we need to do the post installation.
Do we need to do all configuration steps we use to do for XI 3.0 or is it different in PI 7.0.
Your help appreciated.
Thanks,
Vinod

HI,
See the below links
Post Installation steps for activating Adobe Document Services in SAP XI NW 2004S
-/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
Link for posnt installation guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
Regards
Chilla

Post Installation for PI Usage

Similar Messages

Maybe you are looking for