Post Installation steps of SAP Data services

Hi,
Could someone provide screenshots/steps  of the post installation of SAP Data services on Unix.
Thanks,
Rajiv

Hi Rajiv,
Once DS is installed you need to do few more things to make the system ready to use
Configuring repositories
Create a database for the repository on your database server (take assistance from DBA)
Create the repository in the database with the Repository Manager.
Register the repository in the CMC with the Data Services application(here you have to give database details which you have given for creating repository (refer point a &b)
Assign user access to the repository with the Data Services application.
Configuring users and groups
Log into the CMC Use Admin credentials
Create user accounts and assign them to Data Services user groups with the Users and Groups application.
Assign repository access to your users and groups with the Data Services application
Configuring Job and Access Servers
Add and configure Job Servers with the Server Manager
Add the Job Server configuration
Associate local and profiler repositories with the Job Server
Add and configure Access Servers with the Server Manager
restart the Data Services service and verify that the Job and Access Servers are running
Deploying web applications (BODS automatically installed web app if not you need  to manually deploy
Configuring profiler repository connectivity
Login to the Central Management Console (CMC) and register the local repository and select the repository  connection type on the Data Services Repository Properties screen
Register the profiler repository and select the connection type to also TNS-less or DSN-less.

Similar Messages

  • Post installation Steps of SAP EP

    Hi All,
    What is the Post installation Steps of SAP EP...
    Thanks,
    ARIFF SHAIK

    Hi
    Follow the https://service.sap.com/instguides.
    Then open "Installation & Upgrade Guides - SAP NetWeaver 7.0 - Installation"
    In the section "Planning" you will find the Master Guide.
    Read the Master Guide to determine the installable units, the SAP systems required for your IT scenario, and the installation sequence. MG will drive you to the relevant Install guide which help you to fulfill all the pre- and post-installation steps as well the installation itself.
    P.S.
    Usually "Running an Enterprise Portal" scenario requires at least EP, EPC and AS JAVA usage types to be installed
    Please look this[SAP NetWeaver Process Integration 7.1 Post-Installation Steps|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60d2a693-9504-2b10-5ba7-82964bd8370e]
    Hope this helps!!
    Regards
    Vijay

  • What are the post installation steps for sap 4.7ee

    what are the post installation steps for sap 4.7ee

    Hi,
    Post installation steps are as follows.
    1.SICK to be run first to checkt the errors while installation.
    2. Install SAP GUI
    3. Set up the TMS. Configuration the domain controller through SE06 and then set up the transport system through TMS.
    4. Change the default password of SP* and DDIC.
    5. Set up the operations mode using RZ04 and SM63.
    6. Apply patches through SPAM.
    7 Schedule default background jobs through SM36.
    8 Import default profiles through RZ10.
    9. Schedule backup calender through DB13.
    10. Create clients using SSC4
    11. Install lisence
    12. Schedule SGEN

  • POST Installation steps for SAP XI 7.0 SP06

    Hi Experts ,
    We are trying to install XI 7.0 SP06.We are suppose to carry out  post installation
    steps but we are not able to locate a proper post installation guide for the same.
    We have succesfully installed XI 3.0 earlier .However XI 7.0 post installation steps in the guide that we have "SAP NetWeaver 2004s SR1 ABAP+Java on Windows: Oracle" , are relatively less...
    Nevertheless, we have carried out the following steps
    5.21.1 Performing PI-Specific Steps for SLD Configuration
    Local and Central System Landscape Directory (SLD)
    Mapping Security Role to User
    1. Log on to the Visual Administrator of the J2EE engine of the SLD host.
    2. Choose Cluster® Server® Services® Security Provider.
    3. In the Runtime tab, choose Policy Configurations and then the column Components, and select the component
    sap.com/com.sap.lcr*sld.
    4. Switch to the Security Roles tab to display the assigned roles.
    5. Select role LcrInstanceWriterLD.
    The user SLDAPIUSER already exists with its security role LcrInstanceWriterLD.
    6. Switch to edit mode and add user PIAPPLUSER with the same role LcrInstanceWriterLD.
    Note
    For a central SLD, the user PIAPPLUSER must be created in the central SLD ABAP system first and be
    assigned to ABAP role SAP_XI_APPL_SERV_USER. The password must be same as in the XI Exchange
    Profile on the XI Integration Server.
    Note
    For information on the UME actions, see the Post-Installation Guide - SLD of SAP NetWeaver 2004s, section
    Configuring SLD Security, at service.sap.com/sld® Media Library.
    Maintaining SLD Connection Parameters (ABAP API)
    1. Log on to the SAP XI Integration Server System as user DDIC and call transaction SLDAPICUST. The screen
    Maintain SLD Access Data is displayed.
    2. Choose Display <-> Change and proceed as follows:
    a) Replace the existing SLDAPIUSER with PIAPPLUSER user.
    Note
    For a central SLD, make sure you use the user with security role LcrInstanceWriterLD.
    b) Make sure your entry is marked as Primary.
    Note
    Only the entry marked as Primary is active.
    c) Save your settings.
    April 10, 2006 PUBLIC 97
    Now we don't know wether the sld configuration is over or not ...or for that matter in RWB we see only J2se based adapter engine and  not J2ee based adapter engine...
    Kindly help

    Hi..
    Instaed doing this,please try out template based configuration which has been mentioned in the installation guide or else do as follows
    1.Login into NWA (netweaver administrator)
    as
    http://<host.<domain>.<com>:<port>/nwa
    2.Use J2ee_admin user id and password
    3.go to deploy and change
    4.select template based configuration for PI
    5.execute the template
    6.install it
    you can find the list of other templates which are clear and easy to do the post installation step..i found it useful ..
    Apart from these, as per sandro, you can check the data transfer in visual administrator or go the abap engine, transaction RZ70, press accept proposal button
    then execute button , check the data supply without any error
    Thanks
    Gopal
    (Avoid points if useful)

  • Post installation Steps for SAP XI

    Hi,
    I am doing post installation steps for SAP_XI, for the step "Generating roles for SAP_XI and SAP_SLD in transaction PFCG, when I enter Role: "SAP_XI*" then its not generating any roles it is giving message "No roles found in the selected area" Please suggest
    Thanks,
    Nishant

    Create user in SAP XI and then assign them role
    Create user using SU01 transaction. Enter the username and click on the first button (create).
    Follow the process below
    1. Address Tab
    Enter the user details
    2. Logon Data Tab
    Enter the initial password. Make sure user type is Dialog (it is by default).
    3. Roles Tab
    SAP_XI_DEVELOPER
    SAP_SLD_DEVELOPER
    SAP_XI_MONITOR
    (if the user is admin give the admin roles)
    Before logging on to the Integration Builder, logon to ABAP stack (SAPGUI frontend on windows or java) at least once. Then logon to Int.Builder components.
    regards
    Dharamveer

  • Post installation steps for SAP PI, scenarios for SAP ERP 6.0 EhP 3.0 BAIO

    Hi!
    I installed SAP NetWeaver 2004S with PI component.
    I also have a demo SAP ERP 6.0 EhP 3.0 BAIO system with several clients:
    (100: demo client, 200: BW, 300: demo client (copy of 100)).
    Questions:
    what are the post installation steps to configure SAP PI?
    Which scenarios can be used in such landscape?
    (eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
    Thank you very much indeed!
    regards
    Holger

    Hi Holger:
    what are the post installation steps to configure SAP PI?
    http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
    Which scenarios can be used in such landscape?
    (eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
    I recommend you to use proxys in your landscape as you want to interchange messages between
    different clients in the same system.
    Hope this helps you.
    Carlos

  • Post installation steps after SAP BW system copy

    Hi!
    I am about to do post processsing steps after system copy of SAP BW system.
    1) One of the steps is to delete all entries from tables DBSTATHORA, DBSTAIHORA, DBSTATIORA,
    DBSTATTORA.
    Question: what is the way to do this?
    2) During the installation I received the error within import ABAP step.
    (IMP) INFO: import of D010TAB completed (4477754 rows) #20090505133631
    DbSl Trace: Error 12801 in exec_immediate() from oci_execute_stmt(), orpc=0
    DbSl Trace: ORA-12801 occurred when executing SQL stmt (parse error offset=0)
    (DB) ERROR: DDL statement failed
    (CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPSR3700 STORAGE (INITIAL 423090176 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS PARALLEL )
    DbSlExecute: rc = 99
    (SQL error 12801)
    error message returned by DbSl:
    ORA-12801: error signaled in parallel query server P000
    ORA-01659: unable to allocate MINEXTENTS beyond 34 in tablespace PSAPSR3700
    (DB) INFO: disconnected from DB
    As solution I changed the the following lines within D010TAB.TSK:
    from D010TAB~ 0 C err to D010TAB~0 C ign and
    from D010TAB1  C err to D010TAB1 C ign
    Question:
    how to create index manually after system copy?
    Thnak you very much!

    Jgen Pfeiffer wrote:>
    > Hi!
    >
    > I am about to do post processsing steps after system copy of SAP BW system.
    >
    > 1) One of the steps is to delete all entries from tables DBSTATHORA, DBSTAIHORA, DBSTATIORA,
    > DBSTATTORA.
    > Question: what is the way to do this?
    Simply run
    TRUNCATE TABLE <table_name>;
    for each of those tables.
    Make sure to either logon as SAP<SID> or provide the owner of the tables with the statement.
    > 2) During the installation I received the error within import ABAP step.
    > (IMP) INFO: import of D010TAB completed (4477754 rows) #20090505133631
    > DbSl Trace: Error 12801 in exec_immediate() from oci_execute_stmt(), orpc=0
    > DbSl Trace: ORA-12801 occurred when executing SQL stmt (parse error offset=0)
    > (DB) ERROR: DDL statement failed
    >  (CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPSR3700 STORAGE (INITIAL 423090176 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS PARALLEL )
    >  DbSlExecute: rc = 99
    >  (SQL error 12801)
    >  error message returned by DbSl:
    > ORA-12801: error signaled in parallel query server P000
    > ORA-01659: unable to allocate MINEXTENTS beyond 34 in tablespace PSAPSR3700
    > (DB) INFO: disconnected from DB
    >
    > As solution I changed the the following lines within D010TAB.TSK:
    > from D010TAB~ 0 C err to D010TAB~0 C ign and
    > from D010TAB1  C err to D010TAB1 C ign
    >
    > Question:
    > how to create index manually after system copy?
    The problem here was the large INITIAL size clause.
    If there is enough freespace at all in the tablespace this should work:
    CREATE UNIQUE INDEX "D010TAB~0" ON "D010TAB" ( "MASTER", "TABNAME" ) TABLESPACE PSAPSR3700 NOLOGGING COMPUTE STATISTICS PARALLEL;
    If I'm not wrong, the second index is just vice versa:
    CREATE UNIQUE INDEX "D010TAB~1" ON "D010TAB" (  "TABNAME", "MASTER" ) TABLESPACE PSAPSR3700 NOLOGGING COMPUTE STATISTICS PARALLEL;
    In general it is really not a good idea to skip the creation of unique indexes...
    regards,
    Lars

  • Post Installation Steps after installation of sap sol 7.1

    Dear all
    Can you pls share me what are the post installation steps required after the installation of Solution Manager 7.1
    I know some of them as same in ECC
    1 ) SICK
    2) STMS
    3) RZ10 - Profile parmeters
    4) SGen
    5) Back ground Jobs scheduling
    Also tell me which parameters need to be set in solman
    regards
    Shakshi

    Hi,
    You can refer below guide for setup:
    https://websmp103.sap-ag.de/~sapidb/011000358700000872072011E
    Regards
    Vivek

  • What are the System pre-requisite for the BODS installation(SAP Data services)

    I am trying to install SAP Data services, please help me to get system pre-requisite. checked in PAM but i couldnot get it.

    Hi Siddhu,
    Please refer to the below SCN Link which will give you all the details and pre-requisites before instalalling DS 4.x
    Tutorial: How to install SAP Data Services 4.2 - Part 1
    Regards
    Arun Sasi

  • Post installation steps for PI 7.0

    Hi,
    Can anybody send me the Post installation steps for PI 7.0?
    Thanks in advance..
    ~Kumar

    Hello,
    <br><br><br>
    We did PI Installation recently and version is 7.1
    <br><br><br>
    Steps are as under...
    <br><br><br>
    <br>1.     Basic PI installation</br>
    <br><br>2.     System checks after basic installation
    <br>a.     SM50
    <br>b.     SM21
    <br>c.     ST22
    <br>d.     SM12
    <br>e.     SM13
    <br>f.     SM37
    <br><br>3.     Unlock the 001 client for cross-client changes temporarily and set system timezone (STZAC)
    <br><br>4.     Change 001 client settings back to no changes allowed.
    <br><br>5.     Create BASIS team member accounts in ABAP Stack and assign SAP_ALL.
    <br><br>6.     Set directory permission for \usr\sap\trans directory on Transport Domain Controller system.
    <br><br>7.     Import profiles (RZ10)
    <br><br>8.     Add the 4 following entries in to the instance profile and restart instance(RZ10)
    <br>a.     DIR_TRANS =
    hostname.domain.ext\sapmnt\trans
    <br>b.     icm/host_name_full = hostname.domain.ext
    <br>c.     login/system_client = 100
    <br>d.     icm/server_port_0 = PROT=HTTP,PORT=5<sysno>00,TIMEOUT=1800,PROCTTIMEOUT=1800 {SAP Note 1107808}
    <br><br>9.     Configure TMS in transport domain controller{PI DEV} (STMS)
    <br>a.     Add virtual system
    <br>b.     STMS in newly installed system and configure proper transport domain
    <br>c.     In domain controller approve the new system (STMS -> SAP system -> Approve)
    <br><br>10.     Get maintenance certificate and SAP license from service marketplace and apply in to the new system {ABAP and JAVA} (slicense and NWA)
    <br><br>11.     Kernel Update JSPM
    <br>a.     JSPM update
    <br>b.     Kernel update
    <br>c.     BC-FES-IGS update
    <br><br>12.     Support pack installation ABAP
    <br>a.     SPAM update
    <br>b.     Support packs update
    <br><br>13.     Support pack installation JAVA
    <br>a.     Apply support pack stack
    <br>b.     Apply support pack patches
    <br>i.     After JVM installation Error occurs apply MS windows KB973544 {SAP Note 1367498}
    <br>c.     Restart JSPM and continue patch installation
    <br><br>14.     Client copy from client 001 to X00 using profile SAP_ALL
    <br><br>15.     Create logical system and assign it to new client (SALE)
    <br><br>16.     Change UME target in JAVA to client X00.
    <br>a.     Enter URL as http://hostname.domain.ext:port/nwa
    <br>b.     Management -> Infrastructure -> Destination
    <br>c.     Logon data TAB change client to X00
    <br>d.     Restart JAVA Instance
    <br><br>17.     Create following users
    <br>a.     PIAFUSER, PIRWBUSER, PIISUSER, PIDIRUSER, PIREPUSER and PIAPPLUSER on the target SLD and new system manually and assign role/group SAP_SLD_CONFIGURATOR to them. {SAP Note 1309239}
    <br>b.     PISUPER in new system and assign appropriate roles in ABAP and JAVA
    <br>c.     SLD_DS_<SID> and SLD_CL_<SID> on target SLD {Use source system master password}
    <br>d.     JCoRFC_<SID> in new system
    <br>e.     Sapadm user in new system
    <br><br>18.     Assign roles and groups to BASIS team on JAVA Stack
    <br><br>19.     Create PUBLIC logon group (SMLG)
    <br><br>20.     Configure SLD collector job as sapadm (RZ70)
    <br><br>21.     Run Configuration Wizard
    <br>a.     Enter URL as http://hostname.domain.ext:port/nwa
    <br>b.     Configuration management -> Scenarios -> Configuration Wizard
    <br>c.     Select Initial Configuration and click Start.
    <br><br>22.     Create the JCoRFC connection.
    <br>a.     Enter URL as http://hostname.domain.ext:port
    <br>b.     Web Dynpro -> Content administrator -> Maintain JCo destination
    <br>c.     Fill in information for the following 4 entries using client X00 and JCoRFC_<SID> as the user {Make sure you note the distinction between Metadata and Model destinations when you are creating the destination}
    <br>i.     WD_ALV_METADATA_DEST
    <br>ii.     WD_ALV_MODELDATA_DEST
    <br>iii.     WD_MODELDATA_DEST
    <br>iv.     WD_RFC_METADATA_DEST
    (Use dictionary Meta Data for the Metadata connections, use Application Data for the Model Data connections.)
    (Use the master password for EXQ)
    <br><br>23.     Repeat for the remaining 3 JCo RFC destinations. 
    <br><br>24.     Run PI Full Qualified Host Name Wizard {SAP Note: 1320707}{Make sure you check the host names for integration server and SLD}
    <br><br>25.     Create RFC destination in to ERP target system (SM59)
    <br>a.     Give Name PI_INTEGRATIONSERVER
    <br>b.     Connection type H
    <br>c.     In Technical settings TAB provide
    <br>i.     Target host = hostname.domain.ext
    <br>ii.     Path Prefix = /sap/xi/engine/?type=entry
    <br>iii.     User information is blank
    <br><br>26.     Setting SXMB_ADM ERP target system
    <br>a.     Open Integration engine configuration
    <br>b.     Goto -> Change Global Configuration Data
    <br>c.     Role of Business system = Application System {This is optional}
    <br>d.     Provide RFC destination name in Corresponding Integ. Server = dest://PI_INTEGRATIONSERVER
    <br><br>27.     Schedule Standard Jobs as SAPADM in client X00.
    <br><br>28.     SICF service to activate
    <br>a.     /default_host/sap/public/bc/pictograms
    <br>b.     /default_host/sap/public/bc/webicons
    <br>c.     /default_host/sap/public/bc/its/designs
    <br>d.     /default_host/sap/public/bc/workflow
    <br>e.     /default_host/sap/bc/ccms
    <br>f.     /default_host/sap/bc/webdynpro/sap/CTS_BROWSER
    <br>g.     /default_host/sap/bc/webflow
    <br>h.     /default_host/sap/bc/workflow
    <br>i.     /default_host/sap/bc/workflow_xml
    <br>j.     /default_host/sap/bc/xmb
    <br>k.     /default_host/sap/bc/ping
    <br>l.     /default_host/sap/xi/wsdl_sr
    <br>m.     /default_host/sap/xi/wsdl_url
    <br>n.     /sap/bc/webdynpro/sap/appl_soap_management
    <br><br>29.     Adjusting JNLP Heap size
    <br>a.     Open the Exchange profile through the link  u201Cadministrationu201D from the  web page of the Process Integration tools.
    <br>b.     Under the folder u201CIntegration Builderu201D click on the variable u201Ccom.sap.aii.ib.clientjnlp.j2se.maxheapsizeu201D
    <br>c.     Value = 1024
    <br>d.     Save the change and restart the J2EE instance of PI so that the new value can take effect.
    <br><br>30.     Create RFC destination for Advanced Adaptor Engine in sender ERP system(SM59)
    <br>a.     RFC Destination = AAE_<SID>
    <br>b.     Connection type = G
    <br>c.     Target Host = Host Name of AAE Server {PI Server}
    <br>d.     Service No. u2013 HTTP port number of AAE Server
    <br>e.     Path Prefix = /XISOAPAdepter/MessageServlet?ximessage=true
    <br>f.     Under Logon & Security use PIAPPLUSER with PI target systemsu2019 master password.
    <br><br>31.     Create RFC destination <SID>_ALE in ERP Source system with user ERQALEUSER {Make sure you have this user created in new installed system}
    <br><br>32.     Install External Driver Configuration in Process Integration 7.1 Using JSPM {SAP NOTE: 1138877}
    <br><br><br>
    Please let me know if I am missing anything there...
    <br><br><br>
    Cheers,
    <br>
    Yogesh

  • Error in the post installation steps of SLD .

    Hi
    We are working on EP7.0 2004s.We are using local sld.Right now I am doing the post installation steps for SLD.I added the J2EE and UME roles.In the next step I went into the administration tab of SLD for configuring.It is throwing this error.
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
    This is detailed exception I got.
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
    at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:516)
    at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:462)
    at com.sap.sld.wd.main.wdp.InternalMainInterfaceView.wdFirePlugToOldUI(InternalMainInterfaceView.java:154)
    at com.sap.sld.wd.main.Head.onActionAdministration(Head.java:277)
    at com.sap.sld.wd.main.wdp.InternalHead.wdInvokeEventHandler(InternalHead.java:227)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Please help me.
    Thanx & Regards,
    Naresh

    Hi Naresh,
    Can you let me know the service pack for the portal.
    Also try login in using administrator using the http://<localhost><port>/sld
    thanks
    Pankaj

  • Webdynpro error in Post installation steps of SLD

    Hi
    We are working on EP7.0 2004s.We are using local sld.Right now I am doing the post installation steps for SLD.I added the J2EE and UME roles.In the next step I went into the administration tab of SLD for configuring.It is throwing this error.
    <b>com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!</b>
    This is detailed exception I got.
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
    at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:516)
    at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:462)
    at com.sap.sld.wd.main.wdp.InternalMainInterfaceView.wdFirePlugToOldUI(InternalMainInterfaceView.java:154)
    at com.sap.sld.wd.main.Head.onActionAdministration(Head.java:277)
    at com.sap.sld.wd.main.wdp.InternalHead.wdInvokeEventHandler(InternalHead.java:227)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Please help me.
    Thanx & Regards,
    Naresh

    Hey Aviad,
    Yes I did, in my case I've installed PDK SP 9 over SP2 which is prohibited. If this is your case as well do the following:
    1) From the Undeployment tab of the SDM select the com.sap.pct.pdk..
    components.
    2) Using the Archive remover tool which can be accessed from
    System Administration > Support > Portal Runtime > Administration
    Console > Archive Remover --> Remove the portal applications with prefixcom.sap.pct.pdk...
    3) Navigate to Content Administration > Portal content > Content
    Provided by SAP > Platform Add-Ons > Developer Content
    and remove all the contents below this folder.
    4) Restart the server
    After this you can deploy the SP9 business package using the SDM.
    Hope it helps,
    Roy

  • XI Post installation steps

    Hi,
    I'm trying to get XI going at a project.  The basis guys have installed the server but I have an idea none of the 'post installation steps' have been completed.
    The symptoms are that when I start the Integration Builder (SXMB_IFR) the Windows 'File Explorer' is started and not IE. The Integration Web page is not displayed.
    I quickly looked at the Configuration guide and I see none of the RFC destinations mentioned in the guide.
    Is this the reason for the problem ?.  I need to know exactly what totell the basis people to look at. They have never done an XI installation before so I'm almost sure they have not done these configuration steps.
    Thanks
    Andre

    Hi Andre,
    They should look at the intallation/configuration guides that SAP provides. These guides can be found at the service.sap.com and/or help.sap.com
    In a nutshell you have to make sure they have configured:
    SLD settings, these involves configuring RFC destinations, Maintain the SLD parameters in SLDAPICUST.
    Register, Starting up the queues. Configure the role of the integration server in trx SXMB_ADM or SXMB_ADMIN.
    Hope this helps.
    Cheers,
    Roberto
    Message was edited by: Roberto Viana

  • Post Installation Steps for ERP add-on Inventory Manager 4.0

    Hi,
    I need to confirm what are the post-installation activities we must to perfom for ERP Add-on (Inventory Manager 4.0), besides de BC Activation. I did not find any information regarding the post installation steps for the ERP Add-on of Inventory Manager 4.0 (the installation guide for IM 4.0 on service marketplace does not remark the steps only explain the theorical part of the installation)... And we need to confirm if the steps are the same of Inventory Manager 3.2 Add-on or we must do an additional step?
    Best Regards,
    MC
    Stephen Streeter Manju Venkatesha

    Yeah...of course...
    I forgot to specify it.
    I install the first ERP 2005 SR2 on Oracle 10.2.0.2 and the other have to be installed on the same version of DB.
    All installation are not MCOD.
    This mean every installation has its own DB with different SID for every installation.
    And of course I have at least doubled the space required by installer. Taken from sap notes the required space for ERP 2005 SR2 is about 90 GB.
    The total space of mount point is about 500 GB....
    Thanks
    Dan

  • Post installation steps for EP 7.0

    Hi All,
    I have installed EP 7.0 SR1 on windows with Oracle and its successful. (I have selected usage types Java and EP during installation).
    As per the installation guide its said to login as below:
    http://<hostname>:50100/irj --> but when i open it, it says   The requested resource does not exist. But i am able to open normal NW page: http://<hostname>:50100 and access UME, SAP NW Administrator>..
    I have applied permanent license in Visual Administrator. but didnt do any of the post installation steps. I didnt see any of the post installation step in guide also, could you please guide me in completing this?
    Thanks,
    Subbu

    Hi All,
    Thanks for ur response, i am able to open the portal by giving the address as u mentioned..thank u..But i am facing problem as i couldnt see some options: I read the following in help.sap.com
    When you install a portal, you also install predefined system templates for all the connectors that the portal provides. These templates are contained in the System Landscape Templates folder, under
    System Administration--> System Configuration --> Portal Content --> Templates
    , and can be edited in the Property Editor. Editing a template affects any systems that you create based on this template
    I am able to navigate System Administration--> System Configuration but not able to see the option
    Portal Content --> Templates
    The other point mentioned is:
    The system administrator can disable logon by means of the IP address as follows:
    Navigate to System Administration --> System Configuration -->
    Service Configuration
    . i m not able to find the option Service Configuration here??
    I have installed NW 2004s SR1, in help.sap.com they didnt mention anything specific abt. release. Could you please guide me why i am missing those options??
    Thanks,
    Subbu

Maybe you are looking for