Post installation tasks

Hi!
Is there a list or something that tells you what you have to do after an installation to make the system come up automatically after a shutdown.
Linux x86. Oracle 10.1. Enterprice Manager.
The document should tell you what files have to be edited to make listener, database, enteprice manager and so on to start after a system shutdown/start.
/Ulf

Taher,
Both should work and are correct. Usually, I complete the post installation steps after installing the US patch, then apply the NLS patches.
Thanks,
Hussein

Similar Messages

  • WSUS reinstall on 2012 SCCM server post-installation task fails to run/finish

    I had to re-install WSUS on a 2012 R2 SCCM server (Windows 2012), and am running into several issues re-installing. It may help to point out that the SCCM SQL server is remote, so this isn't a WSUS / SQL 2012 issue.
    The sticky post at the top of the WSUS forum has helpful troubleshooting information, and I have tried going through this as well as many other threads on this very topic of re-installing WSUS.
    1. Roles for WSUS and WID were removed successfully. The WSUS Website was manually deleted from IIS. As this is a SCCM server, removing the IIS role is not an option.
    2. I removed the existing WID database files for SUSDB
    3. After rebooting, I verified registry keys were gone, system files were cleaned up, and deleted the program files\update services directory
    4. This isn't a permission issue, as I have clearly installed this before on this server.
    5. Registry keys, system files, and susdb files no longer exist, and the server has rebooted cleanly.
    6. I am able to add the WSUS role selecting WID, and this installs WID without any errors. At this point, simply clicking the post installation task fails, generates an empty .tmp file in my %appdata%\temp folder, and exits the MMC. 
    7. This file is blank. Absolutely empty, so I couldn't really troubleshoot any post installation tasks.
    8. Further investigation shows that the 'C:\Program Files\Update Services\Tools\' directory is gone, and isn't being
    generated.
    9. Ok... DISM /online /Cleanup-Image /Scanhealth didn't return any issues, so I copied the wsusutil out of the windows\WinSxS directory.
    10. Yey! wsusutil postinstall runs, but bombs out on the IIS portion. It generated the DB without an issue, but results
    in an IIS generation error. So, I installed WSUS on a clean 2012 install, then copied over the program files\updateServices directory to reclaim the missing files. 
    The log files show --
    2013-12-06 10:30:34  Configuring IIS...
    2013-12-06 10:30:35  Start: ConfigureWebsite
    2013-12-06 10:30:36  Configuring website on port 8530
    2013-12-06 10:30:39  System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified
       at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
       at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
       at Microsoft.UpdateServices.Administration.UseCustomWebSite.ExecuteIisCustomAction(String arguments)
       at Microsoft.UpdateServices.Administration.UseCustomWebSite.Install(Int32 portNumber)
       at Microsoft.UpdateServices.Administration.UseCustomWebSite.InstallAndConfigure(IisConfiguration& iisConfiguration, Int32 newPortNumber)
       at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
       at Microsoft.UpdateServices.Administration.PostInstall.Run()
       at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
    ... ok - tripple checked that network service has permissions to .net and windows\temp folders.
    netstat -a doesn't show anything running on port 8530 ( in case this was some weird port check in use)
    Which goes back to the missing directory problem -- further net searches show that this is a reoccurring issue for some OOBE... sfc /verifyonly shows ... nothing.
    What is left to be done at this point? The missing folders from the program directory seems to be a problem for some with some users right out of the box. I have read many other threads where users just formatted and started over. Not exactly a solution
    - any help out there on this issue? Any suggestions to determine what file is missing, or generating the IIS issues?

    Part of the post install tasks wanted to download some items including the tools folder.
    Can you expand on this please. The WSUS post-install tasks do not download anything, except what is acquired during the initial synchronization with Microsoft.
    Because of my group policy the WSUS server was trying to download the updates from itself even though it was not setup yet.
    What update(s) was the WSUS server trying to "download"?
    In fact, if the WSUS Server was not setup yet (but you already had a GPO in place), then the first issue here was performing deployment steps out of order.
    But still.... except for the actual installation binaries for the WSUS Server Role on a WS2008SP2/WS2008R2 system, there's nothing the WSUS server needs to get from either Windows Update or a WSUS server. This scenario is actually discussed hundreds of times
    in this forum, but complicating matters, this thread isn't about installing WSUS V3.2 on a WS2008SP2/WS2008R2 system, it's about installing WSUS v65 on a WS2012 system, so I'm a bit confused as to what the actual installation environment is that we're discussing.
    I changed the WSUS server to get it's windows updates from Microsoft and then the post install task succeeded.
    I'd really like to get some more details about what exactly in the "post-install task" was dependent upon content from WU/WSUS.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Post Installation task of Enterprise Portal

    Subject : During the Post Installation task of Enterprise Portal such as Run Configuration Wizard u201CNWA_01u2026..u201D to u201CNWA_07u2026..u201D for portal system. Run u201CInitial setup of functional unit Development Infrastructure (DI all-in-one)u201D in development portal.
    Problem : Can anyone guide me how we are doing ( executing ) task i.e.Run u201CInitial setup of functional unit Development Infrastructure (DI all-in-one)u201D in development portal.What this is step is doing as well as what all the prerequisites for this step.
    Work Area : Dev portal with Java stack only.( SP Level is 17)
    Please guide me on this step as well as all Configuration Wizard steps( NWA_01 to NWA_07) so that I can finish with the post installation of portal.
    Regards
    Nilesh

    Hi my question has been resolved.

  • SQL 2005 Upgrade complete! - Post installation tasks questions!

    Hi All
    I have managed to upgrade our DEV and TST ECC6 systems to SQL2005 (from SQL2000) and so far all seems ok however I have a a few questions and checks I would like some help with. I have included my post installation tasks at the bottom of this post, so you know what I have done.
    I have noticed that when I  run SGEN I get a short dump  LOAD_VERSION_LOST which I am not sure what this means.
    If there is anything else I need to do or should do please let me know.
    Thanks
    Phil
    <b>Post Installation Tasks</b>
    <u>SQL Queries</u>
    exec sp_configure 'show advanced options', 1
    reconfigure with override
    exec sp_configure 'max degree of parallelism', 1
    reconfigure with override
    exec sp_configure 'xp_cmdshell', 1
    reconfigure with override
    alter database <SID> set page_verify checksum
    go
    alter database <SID> set auto_create_statistics on
    go
    alter database <SID> set auto_update_statistics on
    go
    alter database <SID> set auto_update_statistics_async on
    go
    dbcc updateusage ('<SID>')
    go
    exec sp_updatestats
    go
    <u>SAP Tasks</u>
    Check SM21/SM50/DB02/ST04/ST22/SICK for any unusual error messages.

    Hello,
    I want run the below script on SQL 2005, can anyone tell me how I run it in SQL 2005?
    exec sp_configure 'xp_cmdshell', 1
    reconfigure with override
    I need to enable xp_cmdshell in sql 2005
    Reg,
    SAT

  • OBIEE 11g post installation tasks in Linux?

    Hi,
    Do I need to write any script for high availability of OBIEE and web logic servers in Linux? what are the processes to start/stop manually using command? Please give me post installation tasks I need to taken care of.
    Thanks
    Jay.

    Becky,
    You need not do any thing additional to have EM running in the OBI 11g instance. Although it is a deployed JEE application, if your Weblogic Server (WLS) is started and up and running then your EM Console should also be up and running.
    You say that you are doing everything from the command line. So, start the Weblogic Server then navigate to http://< your server name> : 7001/console
    If that comes up then go to
    http://<your server name>:7001/em
    That is your EM Fusion Console and it should come up as well.
    Don't mess with the XML file directly.

  • Post-Installation task client

    Hi
    I´ve a doubt with the post-installation tasks of the installation of the sap system. The default clients are 000,001 and 666.
    In with client I´ve to realize this tasks?In the client 001 and after that I realize the client copy of the client 000. The changes are cross-client?
    More thanks

    Hi Ruben,
    Please let us know which SAP Product and version you have installed. Because there are seperate set of post installation activities for each Product such as ECC, PI, EP, CRM,SRM etc.
    For Ex: If you have installed a ECC system, most of the initial post installation activities such as STMS configuration, SGEN etc need to be done on client 000. This information is very well available in Post installation guides.
    If you have installed a PI system, you need to carry most of the PI specific post installation activities in the java UME client i.e by default it is 001. But you can also perform the activities in any custom client by having a client copy and come configuration changes.
    Cheers....,
    Raghu

  • Installing Update Rollup 4 for R2. Question of post installation task

    I will be installing Update Rollup 4 for Service Manager 2012 R2 on our Orchestrator, Data Warehouse, Service Manager and Portal Server as well as updating the client Consoles.
    Following MS article
    http://support2.microsoft.com/kb/2989601/en-us?sd=rss#install.
    A bit confused about the Post installation tasks. Particularly the following:
    Resynchronize System Center Operations Manager mount point data
    To resynchronize Operations Manager mount point data after you apply this update, follow these steps:
    Disable all the Operations Manager configuration item (CI) connectors in the Service Manager console.
    In Windows PowerShell, check the current execution policy by running the following cmdlet:
    Get-ExecutionPolicy
    If the current execution policy is Restricted, set it to
    Remotesigned by running the following command:
    Set-ExecutionPolicy –force RemoteSigned
    Find the following PowerShell script in your System Center 2012 R2 installation directory:
    OMCIConnector_SyncMetadata_UpdateTimestamp.ps1
    By default, you should find this file in the following location:
    C:\Program Files\Microsoft System Center 2012 R2\Service Manager\PowerShell
    Run the following command from the Primary Management server:
    PowerShell .\OMCIConnector_SyncMetadata_UpdateTimestamp.ps1
    Revert the execution policy to the original value that it had in step 2.
    Enable and synchronize the relevant Operations Manager CI connectors.
    Make sure that all the mount point data is populated in Service Manager.
    I am guessing they are talking about the System Center Configuration Manager Connector but not sure. We don't have a Connector for SCOM. If by OMCIConnector they mean SCOM, then I don't need to worry about this.  If would be nice if they would tell
    you why you are doing this. I don't even know what "Mount Point Data" is.
    Does anyone know if it would cause any problems if I skipped this step? I hate doing stuff when I don't know why I am doing it. For example, step 8 "Make sure that all the mount point data is populated in Service Manager."
    What does that even mean?
    Also, I cannot even find the PowerShell script they are talking about in the C:\Program Files\Microsoft System Center 2012\Service Manager\Powershell folder so are they talking about SCOM or SCCM?

    All of the steps listed refer to the Operations Manager connections. none of these steps relate to the Config Manager connector.  If you are not using SCOM, or don't have a SCOM connector, then you can safely ignore these steps. 

  • APEX POST INSTALLATION TASKS

    i have upgraded from 1.6 To 2.2 .... the installation was successfully now ...
    now i am doing the post installation tasks .. i ahve arrived here and i got this problem
    E:\oracle\HTML_DB\dcm\bin>dcmctl updateConfig -ct ohs
    ADMN-202045
    An exception occurred while constructing the OracleAS Repository API, a DCM depe
    ndent component.
    Resolution:
    This exception may be occurring because the ias.properties file is misconfigured
    Check the exception thrown by the OracleAS Repository API for any additional res
    olution information.
    Base Exception:
    oracle.ias.repository.schema.SchemaException
    iAS Property could not be found Property Name OIDhost in E:\oracle\HTML_DB\confi
    g\ias.properties
    oracle.ias.repository.schema.SchemaException: iAS Property could not be found Pr
    operty Name OIDhost in E:\oracle\HTML_DB\config\ias.properties
    at oracle.ias.repository.local.IASPropertyCache.readValue(IASPropertyCac
    he.java:62)
    at oracle.ias.repository.IASSchema.init(IASSchema.java:234)
    at oracle.ias.repository.IASSchema.<init>(IASSchema.java:200)
    at oracle.ias.repository.SchemaManager.<init>(SchemaManager.java:145)
    at oracle.ias.sysmgmt.persistence.SeedDbAccess.<init>(Unknown Source)
    at oracle.ias.sysmgmt.persistence.SeedDbAccess.getDbAccess(Unknown Sourc
    e)
    at oracle.ias.sysmgmt.persistence.SeedDbAccess.getDbAccess(Unknown Sourc
    e)
    at oracle.ias.sysmgmt.clustermanagement.ComponentTypeFactory.init(Unknow
    n Source)
    at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
    at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
    at oracle.ias.sysmgmt.cmdline.DcmCmdLine.checkInit(Unknown Source)
    at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
    at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)
    E:\oracle\HTML_DB\dcm\bin>

    Bounced,
    I am having the same issue.
    Ant.

  • Task sequence fails to resume after first reboot - Post Installation Task Sequence

    Hi everyone,
    I am unable to deploy a Post Installation Task Sequence whenever I add an application to the "custom tasks" folder in the task sequence.  If I create a blank Post Installation Task Sequence w/o making any changes, it deploys fine and gives
    me a summary page w/ no errors. Just to be clear, Litetouch runs fine when I kick off "cscript litetouch.vbs" from an elevated cmd prompt when logged in as administrator, but after reboot it boots to windows and does nothing.
    I know it's not deploying because it's leaving around a mapped drive to the share, a SMSTaskSequence folder and MININT folder on the target machine.   My understanding is that those are supposed to get cleaned up by LTIcleanup.wsf at the end of the
    task sequence.
    The BDD.log doesn't seem to be of much use.  The last line of the log says "sms task sequencer already found on c:\minint\tools\x64" and then it does nothing.
    FWIW, I'm able to deploy using the standard task sequence and also able to sysprep and capture. The application that I am trying to install is just a batch file that adds the reg key to hide the start menu, then reboot.  I am not rebooting in the script,
    I'm telling the application to do the reboot in MDT.
    I know to a certainty that the target machine (a VM) has been sysprepped and am able to establish a connection to the deployment share so I'm kind of at a loss.  Also looked over Keith's FAQ on the subject and couldn't find any similarities to my issue.
    Any help is appreciated.  I can provide logs if necessary.  Thanks!

    Well, I created a fresh deploymentshare on a fresh windows server 2012 VM and am still having the same problem.  If I create a blank Post OS Installation Task and make no changes, it deploys fine to the target vm (win8.1).  If I have an app (chrome)
    that I have set to reboot after installation, it always (tested this 30+times) fails to resume the task sequence.  I get no final confirmation page and a big mess that I clean up with LTIcleanup.wsf.  
    The deployment share has full (everyone) permissions to the share and I have full perms set to domain admin group for ntfs.  It seems like something goes wrong with the reboot cycle, but autologin seems to work fine with the admin pw so I'm really confused. 
    Like I said, the bdd.log in c:\windows\temp\deploymentshare doesn't have any errors.  I've tested this both on joined and unjoined (workgroup) machines and it makes no difference.
    I should note that I can deploy Chrome and other apps sequentially as long as reboots are not involved.  So far, I've only had this problem if the reboot occurs with the first application.  Haven't yet tested on reboots w/ other apps in the sequence.
    FWIW, this is starting to look like this:
    https://social.technet.microsoft.com/Forums/en-US/2db5f184-8332-4f63-b1ad-385a6d893f8c/mdt-2013-windows-81-application-install-with-reboot-problem?forum=mdt
    Can someone tell me why this might be happening?  Is this a bug with this task sequence? Would someone mind testing this to see if there's just something wrong in my environment? 
    I'd appreciate it.  Thanks.

  • Wsus server 2012 r2 fails to launch post-installation task

    wsus server 2012 r2 faild to launch post-installation task 
    please help i attach a photo with log , this is a brend new domain contoroller of a brand new domain.
    i installed th wsus from server manager .
    this is the log :
    2014-05-01 13:17:51  Postinstall started
    2014-05-01 13:17:51  Detected role services: UI, WidDatabase, Services
    2014-05-01 13:17:51  Start: LoadSettingsFromXml
    2014-05-01 13:17:51  Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentLocal
    2014-05-01 13:17:51  System.TypeInitializationException: The type initializer for 'Microsoft.UpdateServices.Internal.UtilConstants' threw an exception. ---> System.IO.InvalidDataException: Invalid installation directory
       at Microsoft.UpdateServices.Internal.SetupInfo.GetInstallDirectory()
       at Microsoft.UpdateServices.Internal.UtilConstants..cctor()
       --- End of inner exception stack trace ---
       at Microsoft.UpdateServices.Administration.PostInstall.GetConfigValue(String filename, String item)
       at Microsoft.UpdateServices.Administration.PostInstall.LoadSettingsFromXml()
       at Microsoft.UpdateServices.Administration.PostInstall.Initalize(Parameters parameters)
       at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
    Fatal Error: The type initializer for 'Microsoft.UpdateServices.Internal.UtilConstants' threw an exception.

    the installion location is the default installion path - C:\Program Files\Update Services
    the content folder was directed to a diffrent volume - e:\wsus\
    i tried to delete everything that connected to iis and wsus and re install and now i am getting:
    2014-05-05 12:05:33  Postinstall started
    2014-05-05 12:05:33  Detected role services: UI, WidDatabase, Services
    2014-05-05 12:05:33  Start: LoadSettingsFromXml
    2014-05-05 12:05:33  Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentLocal
    2014-05-05 12:05:33  System.TypeInitializationException: The type initializer for 'Microsoft.UpdateServices.Internal.UtilConstants' threw an exception. ---> System.IO.InvalidDataException: Invalid installation directory
       at Microsoft.UpdateServices.Internal.SetupInfo.GetInstallDirectory()
       at Microsoft.UpdateServices.Internal.UtilConstants..cctor()
       --- End of inner exception stack trace ---
       at Microsoft.UpdateServices.Administration.PostInstall.GetConfigValue(String filename, String item)
       at Microsoft.UpdateServices.Administration.PostInstall.LoadSettingsFromXml()
       at Microsoft.UpdateServices.Administration.PostInstall.Initalize(Parameters parameters)
       at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
    Fatal Error: The type initializer for 'Microsoft.UpdateServices.Internal.UtilConstants' threw an exception.

  • Post installation tasks after rapidwiz

    what are the post instllation taskes needs to perform after installation.
    On Windows XP machine all services related to E Business Suite not started automatically.
    We are getting error http 404 not found every time.
    After instllation we were able to login in apps only one time, after that we are unable to login page.

    I checked the log Only two lines are written in the log.
    Following text written in both lines
    process manager initialized.
    OracleVIS_localhost_ToolsTNSListenerAPPS_IVS not started, when I tried to start it manually by the help of services it gives errors Service on localcomputer started then stopped.
    And when I tried to start listener from command prompt it says __"*procedure entry point snlinAddrLocalhost could not be located in dynamic link libaray oranl10.dll."_*_                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • SAP Enterprise Portal - Post Installation Tasks

    Hello everyone,
    I am a beginner in the area of SAP Enterprise Portal. Please bear with me in case if I ask you stupid questions.
    "Our idea is to deploy the BIW 3.5 IVIEW over the portal"
    I have installed the SAP Enterprise Portal 6.0 SP6 on Windows 2000 server environment. I have followed the install guide and I have done the installation successfully. I am also able to logon to the portal server using the irl url http://sodium:5000/irj/portal as an Administrator.
    As a BASIS administrator point of view, what are the next Post Installation activities that I need to perform?
    (Our idea is to deploy the BIW 3.5 Iview over the portal)
    I really appreciate your responses.
    Thanks & regards,
    Nikee

    Hello Nikee,
    Simply define the SAP BW system, add an Alias, import portal certificate (for SSO), and start creating functional iview that can render your BW queries and reports.
    Create a System pointing to the BW server with the following details:
    a) System ID
    b) Client
    c) Web Access Point with "WAS" as category containing the following
    entries: -
    · Protocol
    · Hostname
    Note: Domain name of WAS should be same as portal domain
    After that create BW iviews
    QueryString is in the form "CMD=LDOC&infocube=myCube&query=myQuery"
    You should have WAS on the BW server and also IGS shall also be present.
    To follow with the latest, see note #489961 and
    http://help.sap.com/saphelp_nw04/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm
    Hope this will help.
    Regards,
    AAAttar

  • Exchange 2013 Co-existence Post Installation Tasks

    Hello,
    I recently installed Exchange 2013 binaries on 2 new 2012 r2 servers for a migration. Our existing environment is 2010 sp3 and Outlook 2010/2013. After extending the schema, preparing the forest/domain and installing binaries on the new servers (cas and
    mailbox), some Outlook clients received certificate warnings. I am assuming the new servers are using a default self signed certificate and will require our 3rd party public certificate installed. Is this normal after installing binaries even without configuring
    2013? What would be the next steps? Right now the servers are powered off to avoid end user disruption. 

    Hi,
    Please have a look in to the below mentioned points and the blogs .
    Checklist :
    http://technet.microsoft.com/en-us/library/jj898583(v=exchg.150).aspx
    http://msexchangeguru.com/2013/12/17/exchange-2013-migrationchecklist/
    1.You can use the same exchange 2010 SAN certificate in exchange 2013.But the condition is you should have to use the same namespaces available on the SAN certificate during exchange 2013 namespace and URL'S configuration.
    Export the SAN certificate with key in exchange via mmc and import it on exchange 2013 cas servers .Then you need to enable the certificate for the exchange services like iis,pop,imap and smtp.
    Note :If you have LB you need to install the SAN certificate on LB with intermediate certificate also.
    2.Then you need to configure the virtual directory URL'S name as same as exchange 2010 .
    3.Then you can redirect all the connections to exchange 2013 by re pointing the autodiscover record to exchange 2013 cas servers or else to LB if you have .
    4.Then move one test mailbox from exchange 2010 to exchange 2013.
    If anyone of the user who is having an mailbox in exchange 2010 tries to connect the mailbox ,automatically those connections will be proxied from exchange 2013 to exchange 2010 cas server .
    So finally all the connections to mailboxes will happen via exchange 2013 cas server or else via LB if you have .
    Please reply if you have any queries .
    Regards
    S.Nithyanandham
    Thanks S.Nithyanandham

  • WSUS 2012 Post Installation Fails - Import Default Detectoids failed

    I have installed the WSUS role on a new Windows 2012 R2 Standard server after running a recovery of SCCM from an SCCM backup. When I run post-installation tasks for WSUS, it fails. Here is the log file for the WSUS post installation task:
    2014-02-07 16:43:10  Postinstall started
    2014-02-07 16:43:10  Detected role services: Api, UI, WidDatabase, Services
    2014-02-07 16:43:10  Start: LoadSettingsFromXml
    2014-02-07 16:43:10  Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentLocal
    2014-02-07 16:43:10  Value is true
    2014-02-07 16:43:10  End: GetConfigValue
    2014-02-07 16:43:10  Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentDirectory
    2014-02-07 16:43:10  Value is C:\WSUS Updates
    2014-02-07 16:43:10  End: GetConfigValue
    2014-02-07 16:43:10  Content directory is C:\WSUS Updates
    2014-02-07 16:43:10  Database roleservice is not installed
    2014-02-07 16:43:10  End: LoadSettingsFromXml
    Post install is starting
    2014-02-07 16:43:10  Start: Run
    2014-02-07 16:43:10  Fetching WsusAdministratorsSid from registry store
    2014-02-07 16:43:10  Value is S-1-5-21-3025612760-274001468-3045011964-1001
    2014-02-07 16:43:10  Fetching WsusReportersSid from registry store
    2014-02-07 16:43:10  Value is S-1-5-21-3025612760-274001468-3045011964-1002
    2014-02-07 16:43:10  Update synchronization in progress. Cancelling...
    2014-02-07 16:43:10  Configuring content directory...
    2014-02-07 16:43:10  Configuring groups...
    2014-02-07 16:43:10  Starting group configuration for WSUS Administrators...
    2014-02-07 16:43:10  Found group in regsitry, attempting to use it...
    2014-02-07 16:43:13  Writing group to registry...
    2014-02-07 16:43:13  Finished group creation
    2014-02-07 16:43:13  Starting group configuration for WSUS Reporters...
    2014-02-07 16:43:13  Found group in regsitry, attempting to use it...
    2014-02-07 16:43:13  Writing group to registry...
    2014-02-07 16:43:13  Finished group creation
    2014-02-07 16:43:13  Configuring permissions...
    2014-02-07 16:43:13  Fetching content directory...
    2014-02-07 16:43:13  Fetching ContentDir from registry store
    2014-02-07 16:43:13  Value is C:\WSUS Updates
    2014-02-07 16:43:13  Fetching group SIDs...
    2014-02-07 16:43:13  Fetching WsusAdministratorsSid from registry store
    2014-02-07 16:43:13  Value is S-1-5-21-3025612760-274001468-3045011964-1001
    2014-02-07 16:43:13  Fetching WsusReportersSid from registry store
    2014-02-07 16:43:13  Value is S-1-5-21-3025612760-274001468-3045011964-1002
    2014-02-07 16:43:13  Creating group principals...
    2014-02-07 16:43:13  Granting directory permissions...
    2014-02-07 16:43:15  Granting permissions on content directory...
    2014-02-07 16:43:16  Granting registry permissions...
    2014-02-07 16:43:16  Granting registry permissions...
    2014-02-07 16:43:16  Granting registry permissions...
    2014-02-07 16:43:16  Configuring shares...
    2014-02-07 16:43:17  Configuring network shares...
    2014-02-07 16:43:17  Fetching content directory...
    2014-02-07 16:43:17  Fetching ContentDir from registry store
    2014-02-07 16:43:17  Value is C:\WSUS Updates
    2014-02-07 16:43:17  Fetching WSUS admin SID...
    2014-02-07 16:43:17  Fetching WsusAdministratorsSid from registry store
    2014-02-07 16:43:17  Value is S-1-5-21-3025612760-274001468-3045011964-1001
    2014-02-07 16:43:17  Content directory is local, creating content shares...
    2014-02-07 16:43:19  Creating share "UpdateServicesPackages" with path "C:\WSUS Updates\UpdateServicesPackages" and description "A network share to be used by client systems for collecting all software packages (usually applications)
    published on this WSUS system."
    2014-02-07 16:43:22  Deleting existing share...
    2014-02-07 16:43:24  Creating share...
    2014-02-07 16:43:24  Share successfully created
    2014-02-07 16:43:24  Creating share "WsusContent" with path "C:\WSUS Updates\WsusContent" and description "A network share to be used by Local Publishing to place published content on this WSUS system."
    2014-02-07 16:43:25  Deleting existing share...
    2014-02-07 16:43:26  Creating share...
    2014-02-07 16:43:26  Share successfully created
    2014-02-07 16:43:26  Creating share "WSUSTemp" with path "C:\Program Files\Update Services\LogFiles\WSUSTemp" and description "A network share used by Local Publishing from a Remote WSUS Console Instance."
    2014-02-07 16:43:27  Deleting existing share...
    2014-02-07 16:43:27  Creating share...
    2014-02-07 16:43:27  Share successfully created
    2014-02-07 16:43:27  Finished creating content shares
    2014-02-07 16:43:27  Stopping service WSUSService
    2014-02-07 16:43:27  Stopping service W3SVC
    2014-02-07 16:43:32  Configuring WID database...
    2014-02-07 16:43:32  Configuring the database...
    2014-02-07 16:43:33  Establishing DB connection...
    2014-02-07 16:43:34  Checking to see if database exists...
    2014-02-07 16:43:39  Database exists
    2014-02-07 16:43:39  Switching database to single user mode...
    2014-02-07 16:43:42  Loading install type query...
    2014-02-07 16:43:42  DECLARE @currentDBVersion       int
    DECLARE @scriptMajorVersion     int = (9600)
    DECLARE @scriptMinorVersion     int = (16384)
    DECLARE @databaseMajorVersion   int
    DECLARE @databaseMinorVersion   int
    DECLARE @databaseBuildNumber    nvarchar(10)
    IF NOT EXISTS(SELECT * FROM sys.databases WHERE name='SUSDB')
    BEGIN
        SELECT 1
    END
    ELSE
    BEGIN
        SET @currentDBVersion = (SELECT SchemaVersion FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
        SET @databaseBuildNumber = (SELECT BuildNumber FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
        DECLARE @delimiterPosition INT = CHARINDEX('.', @databaseBuildNumber)
        IF (@delimiterPosition = 0)
        BEGIN
            RAISERROR('Invalid schema version number', 16, 1) with nowait
            return
        END
        SET @databaseMajorVersion = SUBSTRING(@databaseBuildNumber, 1, @delimiterPosition - 1)
        SET @databaseMinorVersion = SUBSTRING(@databaseBuildNumber, (@delimiterPosition + 1), (10 - @delimiterPosition))
        IF @currentDBVersion < 926
        BEGIN
            SELECT 3
        END
        ELSE
        BEGIN
            IF (@scriptMajorVersion > @databaseMajorVersion OR
               (@scriptMajorVersion = @databaseMajorVersion AND @scriptMinorVersion > @databaseMinorVersion))
            BEGIN
                SELECT 2
            END
            ELSE IF (@scriptMajorVersion = @databaseMajorVersion AND
                     @scriptMinorVersion = @databaseMinorVersion)
            BEGIN
                SELECT 0
            END
            ELSE
            BEGIN
                SELECT 4
            END
        END
    END
    2014-02-07 16:43:42  Install type is: Reinstall
    2014-02-07 16:43:42  Creating logins...
    2014-02-07 16:43:42  Fetching account info for S-1-5-20
    2014-02-07 16:43:42  Found principal
    2014-02-07 16:43:42  Found account
    2014-02-07 16:43:42  Got binary SID
    2014-02-07 16:43:44  Fetching WsusAdministratorsSid from registry store
    2014-02-07 16:43:44  Value is S-1-5-21-3025612760-274001468-3045011964-1001
    2014-02-07 16:43:44  Fetching account info for S-1-5-21-3025612760-274001468-3045011964-1001
    2014-02-07 16:43:44  Found principal
    2014-02-07 16:43:44  Found account
    2014-02-07 16:43:44  Got binary SID
    2014-02-07 16:43:44  Setting content location...
    2014-02-07 16:43:44  Fetching ContentDir from registry store
    2014-02-07 16:43:44  Value is C:\WSUS Updates
    2014-02-07 16:43:45  Swtching DB to multi-user mode......
    2014-02-07 16:43:55  Finished setting multi-user mode
    2014-02-07 16:43:55  Writing DB settings to registry...
    2014-02-07 16:43:55  Marking PostInstall done for UpdateServices-WidDatabase in the registry...
    2014-02-07 16:43:55  Starting service W3SVC
    2014-02-07 16:43:55  Configuring IIS...
    2014-02-07 16:43:55  Start: ConfigureWebsite
    2014-02-07 16:44:03  Configuring website on port 8530
    2014-02-07 16:47:21  2014-02-07 16:44:27  Info      IISCustomAction    Performing Setup Action, Command /Install
    2014-02-07 16:47:15  Info      IISCustomAction    Command /Install Succeeded
    2014-02-07 16:47:21  End: ConfigureWebsite
    2014-02-07 16:47:21  Configuring performance counters...
    2014-02-07 16:47:21  Configuring Stats.NET perf counter...
    2014-02-07 16:47:21  Configuring reporting perf counter...
    2014-02-07 16:47:21  Configuring client webservice perf counter...
    2014-02-07 16:47:21  Configuring server sync webservice perf counter...
    2014-02-07 16:47:21  Configuring API remoting perf counter...
    2014-02-07 16:47:21  Bringing services online...
    2014-02-07 16:47:21  Checking initialization status...
    2014-02-07 16:48:00  Database needs initialization.
    2014-02-07 16:48:00  StartServer starting...
    2014-02-07 16:48:00  Generating encryption key to write to the registry...
    2014-02-07 16:48:00  Generating encryption key to write to the database...
    2014-02-07 16:48:13  Generating encryption key succeeded...
    2014-02-07 16:48:13  Setting WSUSService to autostart...
    2014-02-07 16:48:13  WSUSService is set to autostart.
    2014-02-07 16:48:13  Starting WSUSService...
    2014-02-07 16:48:13  WSUSService is now started.
    2014-02-07 16:48:13  Importing default detectoids.
    2014-02-07 16:48:13  Importing CriticalUpdates.xml...
    2014-02-07 16:48:21  Importing Drivers.xml...
    2014-02-07 16:48:31  Importing FeaturePacks.xml...
    2014-02-07 16:48:39  Importing MicrosoftCorporation.xml...
    2014-02-07 16:48:48  Importing SecurityUpdates.xml...
    2014-02-07 16:48:57  Importing ServicePacks.xml...
    2014-02-07 16:49:06  Importing Tools.xml...
    2014-02-07 16:49:06  Importing UpdateRollups.xml...
    2014-02-07 16:49:20  Importing Updates.xml...
    2014-02-07 16:49:28  Importing Windows.xml...
    2014-02-07 16:49:49  Importing Windows2000family.xml...
    2014-02-07 16:49:53  Importing WindowsServer2003DatacenterEdition.xml...
    2014-02-07 16:49:57  Importing WindowsServer2003Family.xml...
    2014-02-07 16:50:04  Importing WindowsXPfamily.xml...
    2014-02-07 16:50:04  Importing LocalPublisher.xml...
    2014-02-07 16:50:04  Importing LocallyPublishedPackages.xml...
    2014-02-07 16:50:13  Importing Applications.xml...
    2014-02-07 16:50:17  Importing Exchange.xml...
    2014-02-07 16:50:22  Importing Office.xml...
    2014-02-07 16:50:27  Importing SQL.xml...
    2014-02-07 16:50:33  Importing Exchange2000Server.xml...
    2014-02-07 16:53:04  ImportDefaultDetectoids failed. Exception: System.Data.SqlClient.SqlException (0x80131904): Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    Warning: The join order has been enforced because a local join hint is used. ---> System.ComponentModel.Win32Exception (0x80004005): The wait operation timed out
       at Microsoft.UpdateServices.DatabaseAccess.DBConnection.DrainObsoleteConnections(SqlException e)
       at Microsoft.UpdateServices.DatabaseAccess.DBConnection.ExecuteCommandNoResult()
       at Microsoft.UpdateServices.Internal.DatabaseAccess.CommonDataAccess.ExecuteSPImportUpdate(Int32 upstreamServerLocalId, String xmlUpdateBlob, Byte[] xmlUpdateBlobCompressed, Int32& localRevisionId)
       at Microsoft.UpdateServices.Internal.DatabaseAccess.CommonDataAccess.ImportUpdate(Int32 ussRevLocalId, String xmlUpdateBlob, Byte[] xmlUpdateBlobCompressed, String xmlSdpBlob, Int32& localRevisionId)
       at Microsoft.UpdateServices.Internal.DatabaseAccess.CommonDataAccess.ImportUpdate(Int32 ussRevLocalId, String xmlUpdateBlob, Byte[] xmlUpdateBlobCompressed)
       at Microsoft.UpdateServices.Setup.StartServer.StartServer.ImportDefaultDetectoids()
    ClientConnectionId:0026c9c0-ff10-4daa-9b8b-ff3c9d1ae055
    2014-02-07 16:53:04  StartServer encountered errors. Exception=Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    Warning: The join order has been enforced because a local join hint is used.
    2014-02-07 16:53:04  Microsoft.UpdateServices.Administration.CommandException: Failed to start and configure the WSUS service
       at Microsoft.UpdateServices.Administration.PostInstall.Run()
       at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
    Fatal Error: Failed to start and configure the WSUS service

    Hi,
    Would you please try below method to check out whether it can fix the issue:
    Open the IIS console and delete the WSUS Admin site and then run the post-install again.
    Here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/f7816b4e-c6d9-4844-ae7b-c4e4a89bcdf4/wsus-fails-to-complete-postinstallation-tasks?forum=winserverwsus
    Regards,
    Yan Li
    Regards, Yan Li

  • XI Post Installation: Cannot see Business Service Test

    Hello Everybody,
    I have installed XI.
    At the stage, Checking the Installation Part 2:
    I have to create a new Business Service: Test
    Save the service and then Activate the Change List.
    I did all of that, but when I enter transaction SXI_CACHE on the ABAP side and then double click SERVICES, I cannot see the Server: Test .
    Does anyone know why this Test Business Service does not appear ?
    Also, I have not yet installed the SLD, can I have an XI system without an SLD ? If I want to install the SLD, can I do this as a separate step from SAPINST or can it only be done as part of the XI installation ?
    Thanks,
    Petr.

    Hello,
    I have checked in the Change List TAB and it is empty, if I change the search to include closed then I can see my Business Service.
    When I open SXI_CACHE on the ABAP side the Services are empty and if I try to clear the SXI_CACHE with F6 or Shift-F6 I get this error:
    Unable to refresh cache contents
    Error during last attempted cache refresh
    Error ID Business System
    LCR_GET_OWN_BUSINESS_SYSTEM_SLD_API_EXCEPTION
    Could this be caused be me not yet installing the SLD, and as I don't yet have an SLD I didn't to the SLD related parts of the XI post installation tasks ?
    Thanks,
    Petr.

Maybe you are looking for

  • When to use what facelet file

    hello sir 1. I have developed one project , where different types of facelet pages are created. but i m confused, what is the rule to use these facelet file , different options displays are as : new Facelet Composition Page new Facelet Footer new Fac

  • HT2801 Why won't Windows 7 recognize the super drive?

    Why won't windows 7 recognize the super drive?  I have set up and it was working yesterday.  I added a usb hup and a HDMI - Vga adapter to run two moniters?  When I booted everything up again I found out that windows would not reconize the super driv

  • Batch no in migo screen for 103 movement

    hai abapers, i have one issue, when user go for migo tcode for gr for purchase order for 103 movement ,when user select batch tab in that tabscreen i want to display batch no details,but at present that tabscreen is empty it doesn't showing any field

  • Today's (June 12) Software Updates Will Not Install

    Anyone else having this issue?  It downloads today's two updates to Snow Leopard (iTunes10.6.3 and AirPort Utility 5.6.1) and then proceeds with the progress bar which reaches a point 2/3 of the way and never progresses after 30 minutes.  At that tim

  • Proxy ports problem

    I have installed the Microsoft Proxy Server in my Internet Sever, everithing was ok and my old site was working. But now that I migrated the new site (Developed in Portal of Oracle 9i AS) from development to production and I installed the Oracle HTTP