Post Instllation Problem ,In R12.
Hello friend.
This is my 2nd installation ,try but same proble.
after installation. In post installation check.
Following are not Checked as ok.(Ar exclemed mark).
1)Database Availability,
2)loging page.
3)Configuration uploded.
In Database Availability the Mesaages are as below......
Database Availability
command: /d01/StageR12/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/oracle/VIS/db/tech_st/10.2.0/VIS_vison.env APPS/APPS
riwTDBup.sh started at Thu May 15 13:45:42 AST 2008
Parameters passed are : /d01/oracle/VIS/db/tech_st/10.2.0/VIS_vison.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle/VIS/db/tech_st/10.2.0
ORACLE_SID : VIS
TWO_TASK :
PATH : /d01/oracle/VIS/db/tech_st/10.2.0/perl/bin:/d01/oracle/VIS/db/tech_st/10.2.0/bin:/usr/bin:/usr/sbin:/d01/oracle/VIS/db/tech_st/10.2.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/d01/StageR12/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
LD_LIBRARY_PATH : /d01/oracle/VIS/db/tech_st/10.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle/VIS/db/tech_st/10.2.0/lib:/usr/dt/lib:/d01/oracle/VIS/db/tech_st/10.2.0/ctx/lib
Executable : /d01/oracle/VIS/db/tech_st/10.2.0/bin/sqlplus
riwTDBup.sh exiting with status 3
RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3 command: /d01/StageR12/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/oracle/VIS/inst/apps/VIS_vison/ora/10.1.2/VIS_vison.env APPS/APPS
riwTDBup.sh started at Thu May 15 13:45:46 AST 2008
Parameters passed are : /d01/oracle/VIS/inst/apps/VIS_vison/ora/10.1.2/VIS_vison.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle/VIS/apps/tech_st/10.1.2
ORACLE_SID :
TWO_TASK : VIS
PATH : /d01/oracle/VIS/apps/tech_st/10.1.2/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/d01/StageR12/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
LD_LIBRARY_PATH : /d01/oracle/VIS/apps/tech_st/10.1.2/lib32:/d01/oracle/VIS/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386:/d01/oracle/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/d01/oracle/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads
Executable : /d01/oracle/VIS/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 2
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 2
Can any one help me what to do now.
great
that helpled by running VIS_vison.env file by running.
i connected by sqlplus. as sysdba
started the database instance but porblem with control file.
below is message of alert log file from bdump.
Thu May 15 15:15:15 2008
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as /d01/oracle/VIS/db/tech_st/10.2.0/dbs/arch
Autotune of undo retention is turned on.
IMODE=BR
ILAT =44
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
tracefiles_public = TRUE
processes = 200
sessions = 400
timed_statistics = TRUE
shared_pool_size = 419430400
shared_pool_reserved_size= 41943040
nls_language = american
nls_territory = america
nls_sort = binary
nls_date_format = DD-MON-RR
nls_numeric_characters = .,
nls_comp = binary
nls_length_semantics = BYTE
sga_target = 1073741824
control_files = /d01/oracle/VIS/db/apps_st/data/cntrl01.dbf, /d01/oracle/VIS/db/apps_st/data/cntrl02.dbf, /d01/oracle/VIS/db/apps_st/data/cntrl03.dbf
db_block_checksum = TRUE
db_block_size = 8192
compatible = 10.2.0
log_buffer = 11142144
log_checkpoint_interval = 100000
log_checkpoint_timeout = 1200
db_files = 512
db_file_multiblock_read_count= 8
log_checkpoints_to_alert = TRUE
dml_locks = 10000
undo_management = AUTO
undo_tablespace = APPS_UNDOTS1
db_block_checking = FALSE
session_cached_cursors = 500
utl_file_dir = /usr/tmp, /usr/tmp, /d01/oracle/VIS/db/tech_st/10.2.0/appsutil/outbound/VIS_vison, /usr/tmp
plsql_native_library_dir = /d01/oracle/VIS/db/tech_st/10.2.0/plsql/nativelib
plsql_native_library_subdir_count= 149
plsql_code_type = INTERPRETED
plsql_optimize_level = 2
job_queue_processes = 2
systemtrig_enabled = TRUE
cursor_sharing = EXACT
parallel_min_servers = 0
parallel_max_servers = 8
background_dump_dest = /d01/oracle/VIS/db/tech_st/10.2.0/admin/VIS_vison/bdump
user_dump_dest = /d01/oracle/VIS/db/tech_st/10.2.0/admin/VIS_vison/udump
max_dump_file_size = 20480
core_dump_dest = /d01/oracle/VIS/db/tech_st/10.2.0/admin/VIS_vison/cdump
db_name = VIS
open_cursors = 600
ifile = /d01/oracle/VIS/db/tech_st/10.2.0/dbs/VIS_vison_ifile.ora
sortelimination_cost_ratio= 5
btree_bitmap_plans = FALSE
fastfull_scan_enabled = FALSE
query_rewrite_enabled = true
indexjoin_enabled = FALSE
sqlexecprogression_cost= 2147483647
likewith_bind_as_equality= TRUE
pga_aggregate_target = 1073741824
workarea_size_policy = AUTO
optimizer_secure_view_merging= FALSE
aq_tm_processes = 1
olap_page_pool_size = 4194304
Thu May 15 15:15:17 2008
WARNING:Oracle instance running on a system with low open file descriptor
limit. Tune your system to increase this limit to avoid
severe performance degradation.
PSP0 started with pid=3, OS id=3946
MMAN started with pid=4, OS id=3948
PMON started with pid=2, OS id=3944
DBW0 started with pid=5, OS id=3950
LGWR started with pid=6, OS id=3952
CKPT started with pid=7, OS id=3954
SMON started with pid=8, OS id=3956
RECO started with pid=9, OS id=3958
CJQ0 started with pid=10, OS id=3960
MMON started with pid=11, OS id=3962
MMNL started with pid=12, OS id=3964
Thu May 15 15:15:18 2008
ALTER DATABASE MOUNT
Thu May 15 15:15:18 2008
ORA-00202: control file: '/d01/oracle/VIS/db/apps_st/data/cntrl01.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Thu May 15 15:15:18 2008
ORA-205 signalled during: ALTER DATABASE MOUNT...
Similar Messages
-
Oracle 8.0.5 Post Installation Problem
Hi all,
I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
However, I am running into a couple of post-installation
problems.
1. root.sh (sucessfully ran).
2. glibc patch (successfuly ran). There were a few errors on the
screen with the "mv" commands (file does not exist). Is tha
alright?
3. catrep.sql (problem). This is where I have a problem.
I ran dbstart as oracle805 (installation account), but I have no
idea whether or not I really started the database. ps -aux did
not yield any clue.
I also tried svrmgrl and "startup", but the file "initXXX.ora"
did not exist, so I copied the existing "init.ora" to
"initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log gave
me the following:
ORA-00202: controlfile: 'ora_control1'
ORA-27037: unable to obtain file status
So, in other words, I have no idea whether or not I have
successfully installed Oracle. All insights are greatly
appreciated.
Thanks a bunch...
Anh
nullPhan Anh Tran (guest) wrote:
: Hi all,
: I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
: However, I am running into a couple of post-installation
: problems.
: 1. root.sh (sucessfully ran).
: 2. glibc patch (successfuly ran). There were a few errors on
the
: screen with the "mv" commands (file does not exist). Is tha
: alright?
: 3. catrep.sql (problem). This is where I have a problem.
: I ran dbstart as oracle805 (installation account), but I have
no
: idea whether or not I really started the database. ps -aux did
: not yield any clue.
: I also tried svrmgrl and "startup", but the file "initXXX.ora"
: did not exist, so I copied the existing "init.ora" to
: "initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log
gave
: me the following:
: ORA-00202: controlfile: 'ora_control1'
: ORA-27037: unable to obtain file status
: So, in other words, I have no idea whether or not I have
: successfully installed Oracle. All insights are greatly
: appreciated.
: Thanks a bunch...
: Anh
Hei !
I also did this fault :-( See this webpage - it's excellent
and describes everything.
http://jordan.fortwayne.com/oracle/rh6x.html
null -
Posted these problems of Zen Micro bef
oh man, I posted this problem before, and I'll probably get the same answer, but anyways, I'm kinda mad because my Zen Micro is having soooo many problems right now. .battery drain when not on, and no, I do not have that one fimware that has that known problem. 2. if the headphone is not in just right, the sound when seem like it's far away. 3. If I touch the top of the jack of the headphones that goes into the Micro, the music will stop playing, until I ge the jack EXACTLY in the right place. that is all the problems I have right now......but anyways, It is very annoying to recharge your Micro overnight, take it school, only to have the battery dead cuz it said overnight after it was done charging........ I'll probably get the same answer I got last time, contact creative, but I was wondering if you think the place I bouught it at would take it back, (Circuit City)i'm gettin pretty mad Creative....... I bought this hoping I wouldnt have this many problems.....Message Edited by augi55 on 08-20-2005 09:3 AM
On account of it being a headphone jack problem, of which there are many, it's quite possible they'll cover it for free even if you're beyond the warranty period (Parts: year, Labor: 90 days). Normally you'll need your receipt for proof of purchase date, but again, with the issue being a headphone jack, it may not even be required.
-
Post installation problems in vista 32bit
Sir
i am newbie.i installed 10gr2 in my vista,but sometimes its starting perfectly and sometimes not.Then i need to restart my machine and then only i am getting access in sql*plus.i have posted it here but the problem is still the same.[post installation problem its not solved yet|http://forums.oracle.com/forums/thread.jspa?threadID=930824&tstart=0] .
when the command maintained bellow is leaving no output at all.
emctl start dbconsoleIN the service panel is showing dbconsole status as server starting only.
what to do?
regards
SayantanHans F wrote:
1) Vista is not an operating system. It is a family of operating systems. Which operating system within that family are you using?windows 7.
>
2) Oracle Database is designed to work on a server. It should have a static IP address and host name, or at least use a loopback adapter as a workaround. How is the IP address and host name on your Vista-xyz assigned?
using it for local machine in laptop.
HOST = FAXCOOLWAREZ037)(PORT = 1521)
>
Hopefully you are not using DHCP to assign the IP address, or you were sharp enough to install the loopback adapter first. -
Post-Install checks - EBS R12 - Ubuntu 804 amd64
Post-Install checks - EBS R12 - Ubuntu 804 amd64
Need help N°2, please.
The window "Post-Install Checks" shows: -----
Validate System Configuration
1 [red X] HTTP
checking URL = http://ubu.mshome.net:8000
RW-50015: Error: HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
2 [red X] Virtual Directory
RW-50015: Error: HTTP Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
3 [red X] Login Page
RW-50015: Error: Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
4 [red X] Help Page
checking URL = http://ubu.mshome.net:8000/OA_HTML/help
RW-50015: Error: Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
5 [red X] JSP
checking URL = http://ubu.mshome.net:8000/OA_HTML/help
RW-50015: Error: JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
[Retry]
[< Back] [Next >]hi
I am getting error with opmnctl the log file contents are
you are running bash version 120.7.12010000.2
bash: too few arguments specified.
*bash start*
You are running bash version 120.7.12010000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
bash: exiting with status 2
bash: check the logfile /media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/logs/appl/admin/log/adapcctl.txt for more information ...
You are running bash version 120.15
The logfile for this session is located at /media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/logs/appl/admin/log/adstrtal.log
Executing service control script:
*/media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/admin/scripts/adopmnctl.sh start*
script returned:
You are running adopmnctl.sh version 120.6
Starting Oracle Process Manager (OPMN) ...
adopmnctl.sh: exiting with status 2
adopmnctl.sh: check the logfile /media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/logs/appl/admin/log/adopmnctl.txt for more information ...
*.end std out.*
*.end err out.* -
Hi everybody,
I’m facing a problem I can’t solve as I’m not an expert with php : I have created a site of which first page is a login. On the second page I would like to retrieve informations from a database based on the logged on user ID. Here is the problem : I don’t know how I can insert the user ID on the SQL request (on page 2). I’ve tried to put as Run-Time value of my Recordset template $_GET[‘MM_Username’] but it does not work. Creating a session value into the bindings panel allows me to display the correct ID value (therefore MM_Username) on the HTML page but still I can’t do anything with it into my SQL request… I’m lost !
Thanks in advance for your help/advices
Best regardsSure ! Here it is (code was generated using the server behaviors panel “Log InUser”)
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
?>
<?php
// *** Validate request to login to this site.
if (!isset($_SESSION)) {
session_start();
$loginFormAction = $_SERVER['PHP_SELF'];
if (isset($_GET['accesscheck'])) {
$_SESSION['PrevUrl'] = $_GET['accesscheck'];
if (isset($_POST['Identifiant'])) {
$loginUsername=$_POST['Identifiant'];
$password=$_POST['Password'];
$MM_fldUserAuthorization = "niveau";
$MM_redirectLoginSuccess = "Menu.php";
$MM_redirectLoginFailed = "erreur.htm";
$MM_redirecttoReferrer = false;
mysql_select_db($database_Main, $Main);
$LoginRS__query=sprintf("SELECT identifiant, passe, niveau FROM repertoire WHERE identifiant=%s AND passe=%s",
GetSQLValueString($loginUsername, "text"), GetSQLValueString($password, "text"));
$LoginRS = mysql_query($LoginRS__query, $Main) or die(mysql_error());
$loginFoundUser = mysql_num_rows($LoginRS);
if ($loginFoundUser) {
$loginStrGroup = mysql_result($LoginRS,0,'niveau');
//declare two session variables and assign them
$_SESSION['MM_Username'] = $loginUsername;
$_SESSION['MM_UserGroup'] = $loginStrGroup;
if (isset($_SESSION['PrevUrl']) && false) {
$MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
header("Location: " . $MM_redirectLoginSuccess );
else {
header("Location: ". $MM_redirectLoginFailed );
?>
De : MurraySummers [email protected]
Envoyé : vendredi 8 mars 2013 18:20
À : Berurier75
Objet : Post login problem
Re: Post login problem
created by MurraySummers <http://forums.adobe.com/people/MurraySummers> in Dreamweaver - View the full discussion <http://forums.adobe.com/message/5132803#5132803 -
I just posted a problem and gave you my email that i cannot get into.
#
i just posted a problem and gave you my email that i cannot get into. i have another email address for you to send an answer for me. [email protected]What does the page say? What do you need help with?
-
Given so many posts about problems, is upgrading to maverick worth it?
Given so many posts about problems, is upgrading to OS X maverick worth it?
I am content using Snow Leopard OS X 10.6.8. But my most recent Garmin GPS map updates returned a message that stated, "Mac OSX 10.6 is an older OSX version that is no longer compatible with modern software. We will be ending support for this operating system soon. To continue using Garmin Express, please upgrade your operating system."
As others have noted, you don't hear from the users who have installed this upgrade successfully. I've read about problems installing the upgrade and then incompatibilities with other applications once it is installed. Would appreciate your experience and thoughts. Thanks.There are several excellent suggestions here.
What I did was clone my Snow Leopard drive to a second hard drive, then installed Mavericks on the clone.
I now have a working Snow Leopard drive as well as a Mavericks drive. I bounce back and forth between them.
I have symlinks set up so all my documents created on the Mavericks drive go to the Snow Leopard drive, but I have copies of all my applications on both drives. It just seemed easier...
I had to disable App Nap in both Quickeys and Keyboard Maestro, but they both seem to work well, and neither is the latest version. (Well, Quickeys is the latest version, but it's not a recent version.)
I only check email in Snow Leopard, never in Mavericks, so my Inbox is not scattered over both systems.
The Mavericks disk takes longer to boot, and it does occasionally seem sluggish, but it's not a deal-breaker. Like many, I have some legacy software I use, so I don't want to commit to Mavericks full time. But it's nice being able to use both.
I do like using Safari in full-screen mode, but that's the only program I use full-screen for.
Hope this helps.
Andy -
Post-Modification Problems: Hard Freezes. Kernel Panic?
So, I bought a used Dual 867MHz MDD back in March and it appeared to be 100% functional. It even had gone through the PSU/fan exchange program (and was still slightly loud). Comparing it to a Dual 867MHz MDD I got just a week ago, it had a different PSU, all different fans, a different heatsink, different optical drive, and a better GPU (Radeon 9000 Pro 64MB as opposed to the "new" DP867 having a GeForce 4 MX 32MB).
About two weeks ago I overclocked the system bus on the first DP867 to 167MHz, thus bringing the CPUs to 1.08GHz. No problems there. I even changed the heatsink to a copper one from a DP1.42GHz FW800 model. Again, no problems. Pre-mod I had a 4x512MB config of PC2700 Crucial DDR memory at CL2.5. I replaced those with a 2x1GB config of PC3200 Princeton DDR memory at CL2 (2-3-2-5 to be exact) that have heatspreaders. I didn't change the GPU (though I have a Radeon 9800 Pro I'm going to put in once I resolve my problems... read on...).
Pre-mod and post-mod any RAM that is PC2700 or faster is showing up as PC2600 in System Profiler, which I find very odd. That same Crucial RAM is now in the un-modded DP867 which has a 133MHz bus and it, again, shows up as PC2600. I find this odd.
When I first got the now-modded MDD, I replaced the stock 60GB IBM HDD with a Maxtor 200GB drive that has a 16MB buffer. Works fine. All this time, though, it was on the ATA66 bus. Post-mod, I moved it to the ATA100 bus and then my problems began...
The machine would boot just fine. In fact, it would boot so fast I never saw the blue OS X loading screen. Kind of freaky. Then it would HARD crash in 1-5 minutes. The only solution was to hold in the power button until the machine turned off. Putting the drive back on the ATA66 bus didn't help. Back on the ATA100 bus, I could not re-install OS X from a 10.4.3 disc I have (guy who sold me the first MDD included that and iLife '06) because it couldn't verify the hard drive. Fortunately, I had so little on the drive, I backed it up to one of the spare 60GBs by putting them both in the second MDD and using Carbon Copy Cloner (great app!).
With the Maxtor on the ATA66 bus, I could re-install OS X, so I did. I did the Archive & Install so as not to have to deal with migrating user data. First thing I noticed when it rebooted into a fresh 10.4.3 was the CPU temperature at 60°C! As far as I know, these particular PPC chips max at 62. I freaked. I shut the machine down and let it sit for several hours before booting back up and patching to 10.4.7 and re-installing the Developer tools (and patching those to Xcode 2.4). This was a problematic process, interestingly.
My system is now back to the way it was pre-mod and though it's working a lot better, it will still occassionaly hard crash/freeze. Is this a kernel panic? When I shut it down and then boot back up it tells me I can send a report to Apple, but rarely does it show me the report.
Here're the things I think could be problematic or just some possible ideas:
1. I was under the impression that the 167MHz bus would recognize PC2700 speeds, but all my fast RAM shows as PC2600, which isn't even a real speed. This worries me a bit, as slower RAM doesn't play nicely with the faster bus.
2. The Acbel PSU doesn't have enough output. I believe it's 360W max (what an odd value). I changed all the fans to be quieter (and thus slower), but the 120mm main case fan had to run off of one of the 12V power leads since it uses too much power to go off the mobo's 2-pin lead meant for said 120mm fan. I also added two 60mm behinds the heatsink which are on a fan controller (also hooked up to one of the 12V leads - I only have one HDD and one optical drive, so there're lots of leads). I also plan on putting a Radeon 9800 Pro in, but now I wonder if this PSU just can't handle the added pull from the OCed bus (and CPUs) and extra fans (not to mention slightly more power-hungry 120mm fan).
3. The PC3200 RAM's 2-3-2-5 timings don't sit well with the system. The MDDs should be able to handle both CL2 memory and a 2x1GB config according to developer documentation for them.
4. I messed up the ATA100 bus during the modding, though with nothing attached to it, I don't see why this should be an issue.
5. Repeatedly opening and closing the case has weakened the thermal paste and I need to re-attach the heatsink. I doubt this is true, but you never know.
6. The PSU is over-heating? I know they get really hot and I'm in agreement with other modders that the MDD design is not thermally officient.
7. The CPUs are overheating. Temperature Monitor, post-mod and not including the post-OS X reinstall temp reading, has yet to show these CPUs hit 60°C. They get to the mid 50's no problem, and in fact, get to the high 40s very fast (and then VERY slowly rise to the mid 50s from there). Overall, then, the system is warmer than it was pre-mod, which I find odd considering the better heatsink and extra fans.
8. These processors just aren't 100% stable at 1.08GHz. It's possible if you consider the way processors are made and why they get clocked to the speeds they get clocked to. Or...
9. The whole CPU board needs more voltage, which would require some more soldering.
Lastly, this machine seems to, since the mod, be cursed by the PowerMac G4 "No Sleep For You!" Bug. No matter how you put it to sleep or wake it up, only the fans kick in on wake-up and none of the rest of the system. Holding the power button shuts it down, and after booting it tells me I can send an error report to Apple, and again it only occassionaly shows me said report. My father has a un-modded 733MHz Digital Audio G4 that can't sleep and my un-modded Dual 867 MDD can't sleep (it wakes up, then hard crashes about 5 seconds later).
Any information would be greatly appreciated. Not to knock the fine folks at MacMod.com, but I haven't been getting the kind of feedback on all of this I was hoping for there.
Here're my machine stats (pulled from an error log):
Model: PowerMac3,6, BootROM 4.4.8f2, 2 processors, PowerPC G4 (2.1), 1.08 GHz, 2 GB
Graphics: ATI Radeon 9000 Pro, ATY,RV250, AGP, 64 MB
Memory Module: DIMM0/J21, 1 GB, DDR SDRAM, PC2600U-20320
Memory Module: DIMM1/J22, 1 GB, DDR SDRAM, PC2600U-20320
AirPort: AirPort, 9.52
Modem: Dash2, UCJ, V.92, 1.0F, APPLE VERSION 2.6.6
Network Service: AirPort, AirPort, en1
Parallel ATA Device: Maxtor 6L200R0, 189.92 GB
Parallel ATA Device: PIONEER DVD-RW DVR-106D,
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: USB-PS/2 Optical Mouse, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
Extra System Software:
Flip4Mac (latest version), Temperature Monitor (set to launch at log-in), Developer Tools (latest version).
Thanks in advance!A few people out there have assured me that if I don't max out the system in terms of add-ons and things, the PSU should be more than adequate. I have 1x fan controller, 1x HDD, 1x optical drive, 1x graphics card in AGP slot that doesn't require an extra 12V power lead, no PCI cards, only two sticks of RAM, an overclocked system bus, and one fan hooked to a 12V lead rather than its 2-pin connection on the mobo (after discovering it doesn't run on said 2-pin connection). I've also taken out the case speaker to allow air to be pulled in through the top of the case.
I plan on adding two more fans to the fan controller (it can support 4). These fans will go at the bottom front of the case (under the face plate) and run at low speeds just to make sure the process of air flowing through the lower case starts off strong. So, two 60mm fans start it, the 120mm fan forces it past the heatsink (though as many probably know, not the whole heatsink - what a great design...), and then the two 60mm's behind the heatsink pull hot air out of the case.
Thanks for the info about System Profiler, Malcolm. I think you're right, though - if the CPUs were overheating, it would shut down. That's the whole point of the TAU's or whatever they're called.
I'm starting to think that either the 2-3-2-5 PC3200 RAM is suspect, or the processors are not stable at 1.08GHz. I'd downclock them back to 867MHz, but I think I need to buy some surface-mount resistors for that, and I really don't know what kind to get (as in, how many ohms). -
Configuration upload failed in post check process of R12.1.1 installation
I tried to install 64 bit R12.1.1 on64 bit linux OS.I checked pre-requirements as in the document ID 761566.1.It passed in all pre-checks.But at 92% of step 2 it shows error as "RW-50004: Error code received when running external process. Check log file for details.Running Database Install Driver for EBSR121 instance".
I gave retry . At post installation check.Configuration upload,HTTP,Help page,jsp, virtual directoryand login page failed.I start OPMN,Apache server,in application part .It result in HTTP,Help page, jsp ,virtual directory passed. Still configuration upload and login page failed.
Configuration Upload:
uploading config file at /data3/r12/db/tech_st/11.1.0/appsutil/conf_EBSR121.txt
Failed upload of config file at /data3/r12/db/tech_st/11.1.0/appsutil/conf_EBSR121.txt.
Login Page
checking URL = http://hschartomr0111.hclt-guindy.co.in:8012/OA_HTML/AppsLogin
RW-50016: Error: - {0} was not created:
File = {1}
Checking the log file contains as follows.
Log file located at /data3/Release12/db/tech_st/11.1.0/appsutil/log/EBSR121_hschartomr0111/ApplyDatabase_04281615.log
^M
| 0% completed ^M
/ 0% completed ^M
- 0% completed ^M
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for EBSR121 instance.
While i connect sqlplus it throws error as "libclntsh.so.11.1 : no such file or directory exist"
Database listener is up.Application listener is in down. Can't connect to database.
Kindly assist me to proceed further.
Thanks in advance.Following is the log file content:
configuration upload:
uploading config file at /data3/r12/db/tech_st/11.1.0/appsutil/conf_EBSR121.txt
AppsConfig : 'config.txt' uploading...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : hschartomr0111
sDbDomain : hclt-guindy.co.in
sDbPort : 1533
sDbSid : EBSR121
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@hschartomr0111.hclt-guindy.co.in:1533:EBSR121
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hschartomr0111.hclt-guindy.co.in)(PORT=1533))(CONNECT_DATA=(SERVICE_NAME=EBSR121)))
Failed upload of config file at /data3/r12/db/tech_st/11.1.0/appsutil/conf_EBSR121.txt
Database log file shows as:
test using command: su applr12 -c "touch /home/orar12/oraInventory/test.tst"
touch: cannot touch `/home/orar12/oraInventory/test.tst': Permission denied
RW-00022: Error: - Unable to create file with proper privileges:
Apps ORACLE_HOME OraInventory File Directory
Mount Point = /home/orar12/oraInventory
Trying to change the permission of oraInventory as root user
Successfully changed the permission of oraInventory as root user
test using command: su applr12 -c "touch /home/orar12/oraInventory/test.tst"
touch: cannot touch `/home/orar12/oraInventory/test.tst': Permission denied
RW-00022: Error: - Unable to create file with proper privileges:
Tools ORACLE_HOME OraInventory File Directory
Mount Point = /home/orar12/oraInventory
But we gave 777 permission to oraInventory file. -
Post-trigger problem in master detail form.
I have designed a master detail form having two data blocks.
in detail data block there is a post-query.
when i tried delete one record in master block
an error occurred ie
'frm-40654. Record is updated by another user
re-query to see changes'.
in detail block there are 3 non database items.
when i delete the post-query trigger the record is deleting properly.but the post-query trigger is also needed to display the non database item values. please give me a solution to tackle this problem.Hi,
Even though yout items are non-database items, when you assign a value to them forms sets the block status to "CHANGED".
Add the following lines add the end of your post-query trigger to reset the block status to "QUERY"
set_record_property (GET_BLOCK_PROPERTY('YOUR_BLOCK_NAME',CURRENT_RECORD)
,name_in('system.cursor_block')
,STATUS
,QUERY_STATUS
Hope this helps,
Hugo -
XI Post-Installation problem (403 Forbidden)
Hi,
currently i'm executing the post-installation of XI.
At topic "Creating RFC Destinations in the ABAP Environment" especially creating the RFC-Destination "INTEGRATION_DIRECTORY_HMI" (SM59) I have a problem. After saving all necessary entries in various tabs, i get after executing "Test connection" the HTTP-Code 403 (forbidden).
Following is the exact error i am getting:
HEADER NAME HEADER VALUE
~response_line HTTP/1.1 403 Forbidden
~server_protocol HTTP/1.1
~status_code 403
~status_reason Forbidden
connection close
set-cookie MYSAPSSO2=AjExMDAgAA9wb3J0YWw6WElJU1VTRVKIABNiYXNpY2F1dGhlbnRpY2F0aW9uAQAIWElJU1VTRVICAAMwM
set-cookie JSESSIONID=(ximac_XID_00)ID9751150DB19780753031607883521End; Version=1; Path=/
set-cookie saplb_*=(ximac_XID_00)9751150; Version=1; Path=/
pragma no-cache
cache-control no-cache
expires 0
content-type text/html
content-length 1506
server SAP J2EE Engine/6.40
date Mon, 23 Sep 2002 08:37:06 GMT
HTTP BODY
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Error Report</title>
<style>
td {font-family : Arial,
Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link
A:visited
A:active
</style
>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmar
gin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpaddin
g="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
<td align="left" colspan="2" height="48"><font face="Arial, Verdana, Hel
vetica" size="4" color="#666666"><b> 403   Forbidden</b><
/font></td>
</tr>
<tr bgcolor="#3F73A3">
<td height="23" width="8
4"><img width=1 height=1 border=0 alt=""></td>
<td height="23"><img
width=1 height=1 border=0 alt=""></td>
<td align="right" height="2
3"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SA
P J2EE Engine/6.40 </b></font></td>
</tr>
<tr bgcolor="#9DCDFD">
<td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></
td>
</tr>
</table>
<br><br><br><br><br><br>
<p><font face="Arial, Ve
rdana, Helvetica" size="3" color="#000000"><b> You are not au
thorized to view the requested resource.</b></font></p>
<p><font face="
Arial, Verdana, Helvetica" size="2" color="#000000"><table><tr><td valig
n="top"><b> Details:</b></td><td valign="top"><PRE>No details avail
able</PRE></font></td></tr></table></font></p>
</body>
</html>
Time (ms) 17,007
I do not find the way to solve it....
With regards
SunilHi,
Now i am getting another problem.
While testing SLDCHECK i am getting exception while calling function LCR_LIST_BUSINESS_SYSTEMS.
Please find the detail below.
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: XIMAC
port number: 50000
user : XIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
any guess to solve this problem.
with regards
Sunil -
Beehive post-Installation problem
Hi, I'm istalling Oracle Beehive 2.1.0.0 in a Oracle Linux 5.
First I installed Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production, then guided by I installed Oracle Beehive, I followed the post-installation procedures http://docs.oracle.com/cd/E16671_01/bh.200/e16641/what_you_need_to_know.htm#BIJGGFJH, in the first step (Oracle Beehive Database Post-Installation Procedures - http://docs.oracle.com/cd/E16671_01/bh.200/e16641/db_post.htm#BHAJIEID) I make correctly (at least) the first two steps, in the third one no error show but if I check configuration with the “list_bootstrap_configuration” command what I see is that the desired password is in the schema name field.
After this, I can only use some of the commands, for example with activate_configuration or list_ports I receive:
beectl: command failed. See the log file "/u01/app/beehive/product/2.0.1.0.0/beehive_1/beehive/logs/beectl/2012.06.15/beectl_shell_17_06_04+0300.txt" for more details.
Log says:
2012-06-15T15:27:30.528+03:00] [beehive] [WARNING] [] [commandline.OcsCtlException] [host: sergio.signum.com.tr] [nwaddr: 127.0.0.1] [tid: 10] [userId: oracle] [ecid: 127.0.0.1:24886:1339763249622:1,0] new-beectl-exception-instantiated-logging-automatically : (no-message-to-log)[[
oracle.ocs.commandline.BeeCtlException
at oracle.ocs.commandline.framework.ConfigurationManagerInitializer.initConfigManager(ConfigurationManagerInitializer.java:161)
at oracle.ocs.commandline.framework.ConfigurationManagerInitializer.initialize(ConfigurationManagerInitializer.java:138)
at oracle.ocs.commandline.framework.OcsCtlApplicationScope.initConfigurationManager(OcsCtlApplicationScope.java:448)
at oracle.ocs.commandline.framework.OcsCtlSession.initConfigurationManager(OcsCtlSession.java:498)
at oracle.ocs.commandline.sysmodel.ConfigurationManagerHelper.<init>(ConfigurationManagerHelper.java:101)
at oracle.ocs.commandline.sysmodel.ConfigurationManagerHelper.getInstance(ConfigurationManagerHelper.java:108)
at oracle.ocs.commandline.CommandEnv.getConfiguration(CommandEnv.java:570)
at oracle.ocs.commandline.framework.infracmds.ModifyBsp.execute(ModifyBsp.java:345)
at oracle.ocs.commandline.framework.LocalCommandExecutionEnv.execute(LocalCommandExecutionEnv.java:90)
at oracle.ocs.commandline.framework.ModeHandler.executeCommand(ModeHandler.java:525)
at oracle.ocs.commandline.framework.ShellModeHandler.executeCommandLocally(ShellModeHandler.java:205)
at oracle.ocs.commandline.framework.ShellModeHandler.access$300(ShellModeHandler.java:71)
at oracle.ocs.commandline.framework.ShellModeHandler$ProcessLine.processLine(ShellModeHandler.java:279)
at oracle.ocs.commandline.framework.ShellModeHandler$ProcessLine.access$100(ShellModeHandler.java:208)
at oracle.ocs.commandline.framework.ShellModeHandler.processCmd(ShellModeHandler.java:159)
at oracle.ocs.commandline.framework.OcsCtl.main(OcsCtl.java:174)
Caused by: oracle.ocs.core.store.exceptions.DataStoreProviderException: Unable to get Config DataSource
at oracle.ocs.framework.store.DataStoreAccessLocalFactory.getConfigDataSource(DataStoreAccessLocalFactory.java:564)
at oracle.ocs.commandline.framework.ConfigurationManagerInitializer.initConfigManager(ConfigurationManagerInitializer.java:159)
... 15 more
Caused by: java.sql.SQLException: MalConfiguration Exception.
at oracle.ocs.framework.store.OcsNonJndiBootstrapDataSource.<init>(OcsNonJndiBootstrapDataSource.java:137)
at oracle.ocs.framework.store.DataStoreAccessLocalFactory.getConfigDataSource(DataStoreAccessLocalFactory.java:561)
... 16 more
Caused by: oracle.ocs.core.store.exceptions.MalConfiguredDataStoreException: Unsupported Connect String: beehiveConn
at oracle.ocs.core.store.DbUtil.getServiceNameFromConnectString(DbUtil.java:479)
at oracle.ocs.framework.store.OcsNonJndiBootstrapDataSource.<init>(OcsNonJndiBootstrapDataSource.java:135)
... 17 more
Even if I try to clear the data given in previous steps with “clear_proposed_configuration” command I received the error.
I checked and there are 6 patches, but it seems none of them fix the problem, althought I couldn’t find from where to download. Also In the contents of the installation of Beehive, one point (out of the installation against database) it’s about installing Oracle Beekeaper, maybe that will help, but as far as I know it’s only a UI for Beehive.
(http://docs.oracle.com/cd/E16671_01/bh.200/e16649/beectl.htm#list_bootstrap_configuration here is the documentation about beectl)
Maybe the problem is that I'm installing in a 64 bits and documentation of Beehive says that only 32 bits is supported, but I needed to try because our client machine is a 64bit Linux .. any other suggestion?for Instant Messaging, I believe you need to review Chapter 25 (Configuring XMPP) of the Installation Guide.
At least you need to do a
beectl modify_property --component _XmppService name DomainNames value <domain>
beectl activate_configuration
beectl restart --component BEEAPP_<instance>.<host>
For any user partaking in IM, you need to define an IM Address, as this is needed to provision the user to the XMPP Service.
If you master your user in an external directory, you can map existing mail addresses to also be used as IM Address, e.g.
<directory_attribute_map_entry>
<source_object>ENTERPRISE_USER</source_object>
<AttributeMap>
<Field>
<source_attribute>mail</source_attribute>
<target_attribute>BUSINESS</target_attribute>
<target_extended_attribute>IM</target_extended_attribute>
<target_attribute_type>ADDRESS</target_attribute_type>
</Field>
HTH, Thomas -
Hi all,
I am facing an issue where i have done booking through MFBF and some parts got stored for post processing, now the problem is that when i am doing document specific reversal, parts which got stored for postprocessing is not getting reversed while other parts got cleared. Kindly help
Prashant.Pillai
SAP PP ConsultantHi,
There are 2 ways to solve the problem.
1. Clear the backflush error using MF47 and reverse both the docs.
2. Do the material document reversal and delete the post processing error in MF47 because the error there is MF47 is actually not posted and is under reserve for that Header material. This option is only good for testing but not in actual production scenario.
Regards,
Gaurav Mehra -
Hi all,
I've related some problems on my post install of Ora 9ir2 on Mandrake 8.2.
Probably, this kind of troubles are occurring becouse Mandrake doesn't have the same paths important for theMike,
Check your sqlnet.ora. Probably there is a syntax error in it (number of )'s ?).
The listener will ignore those errors but tnsping will carsh. This happend to my with my Oracle 9i on Red Hat 9.
kind regards,
Ivan
I am having problems running sqlplus after installing
Oracle 9.2.0.1.0 on Redhat 9.
The error I get when trying to use sqlplus is:
I have the correct tnsnames.ora file in
$ORACLE_HOME/network/admin/ and can also ping the
host I am trying to connect to.
When I try to run tnsping to contact the host tnsping
stops running with a segmentation fault.
I have followed the installation instructions on the
www.puschitz.com web site to get this far but am
unsure of the next step to resolve the problem.
Any advice gratefully received.
Mike
Maybe you are looking for
-
Converting MS Word docs with coloured bacgrounds to pdf
Forgive an Acrobat 'dope' but this outwardly appears to be a simple problem ....... that I can't figure out! For work I am using Microsoft Office Word 2003 (MS Office Pro 2003) and Acrobat 8 Pro. I have no problem converting an MS Word doc, with bac
-
Hierarchies - Showing not posted values.
Hi, I've a query, I'm using InfoObject 0GL_ACCOUNT and a hierarchy for displaying it. For some accounts, no values have been ever posted, but I wan't this accounts tho show when you expand the hierarchy. Now when you expand the hierarchy only the acc
-
Photoshop CS6 Photomerge for astrophotography
I have been have been unsuccessful using photomerge to stitch 3 shot panoramas of the night sky (milky way and stars only) with manual settings, using a tilt shift lens with plenty of overlap. Perhaps the part of the problem is that the photos have
-
Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?
-
Purpose of Check Boxes on New ITunes
I just downloaded the newest iTunes. A check box appears on every song and is checked. When I uncheck it my song disappears. Anyone know what's going on???