Post ios5 update -- videos for ipad2 wont start after adding album art using get info

this never happened w ios4. before, i could manually add posters on my movies using get info. but now, everytime i add posters the movie wont start. i wanna enjoy my movie playlist complete with movie posters/ cover art. do you experience the same prob?

Just added new art to two albums in iTunes v7. One the old way (Google Images then a drag and drop) and the other asking iTunes to get it for me. Only the art that was added manually has moved over to the iPod, which is 5th Generation 30GB.
It's not the worst thing in the world seems as I never had that art before anyways. I'm sure an update will be out soon it is a .0 release and I imagine they is lots of things under the hoot getting us ready for OS X 10.5.
iMac 2GHz Intel Core Duo, 1.5 GB RAM.
iBook G4 1.5 GB RAM. Mac OS X (10.4.7) 5G iPod 30GB
http://web.mac.com/vyvyenne/

Similar Messages

I Tunes for WIndows wont start after upgrade to 8.0.1

I recently upgraded to iTunes 8.0.1.11. After upgrade, if for some reason I need to reboot my computer iTunes will not start. It took forever to finally figure out what it was. I couldn't sync my iPod, could not get on to iTunes , etc. I finally had to try to uninstall Bonjour to make it come up. The problem is that I can never fully uninstall Bonjour. It says I do not have sufficient privileges. It will be ok until I have to reboot again or turn off my computer. I then have to try to uninstall bonjour to make it come up again. Is there a fix for this bug so I don't have to go through the same procedure every time I reboot?

As far as the sufficient privileges go.
You may wish to temporarily disable User Access Control (UAC)
This should then give you permission to complete the uninstall process like you have been doing. Also ensure you are an Administrator user on the account. That right away will cause the message to appear if you are not.
You want to ensure this gets turned back on if you do not have adequate security protection such as
-Firewall Software
-Anti Virus Software
-Spyware/Adaware Software
To Turn UAC off in the easiest way possible
-Launch Control Panel
-Launch User Accounts
In this Window you will see an option called "Turn User Access Control ON/OFF" Click on this. A simple pop up window will appear. If it has a check mark in the box. Un-check it. Reboot. UAC is now off.
Windows security will notify you of this. Feel free to ignore it while you try to uninstall again. Repeat the steps above to turn it back on when you are ready.
By any chance have you tried a Basic Uninstall of Apple Software? and then Run the iTunes Setup file in Administrator Mode?

So my daughter's ipad2 wont start up or its starting up and we just cant see it??? when i hold down the home button and the power button the apple icon comes on then goes away,the only way to see the screen is when you takescreenshot?????any answers????

so my daughter's ipad2 wont start up i think its on but you cant see anything unless you take a screenshot then you can see for a split second then nothing,and when i hold down the home button and the power button it will reset then i can see apple icon for a second then nothing?????

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150;30

Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150:30

Yes, Actually was done from an Apple Genius at the apple store, the hard Disk was formatted and then re installed everything from back up.

Can i update software for ipad2?

can i update software for ipad2?

If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972

Portege Z930-118 wont start after BIOS update

my PORTG Z930-118 failover and wont start after i upgrading in middle of upgrade i remove power and press shutdown bottom after that i see the power and wireless but screen still black ?
Any help please

Hmmmm.... BIOS upgrade interruption has screwed up BIOS and thats the reason why your notebook doesn't start properly. BIOS is damaged now.
In such case you need professional help by authorized Toshiba service provider.
On this forum you can find many threads about similar problems. Some people have tried to fix this alone and if you are interested to read how one other forum user has fixed it check please this thread.
Ayway, you can contact nearest Toshiba service, explain the situation and ask for help.

Is there any app for phone auto start after swithced off??

Is there any app for phone auto start after swithced off??

Are you looking for an app which will startup the Z10 at a specified time?
I don't know of one. I have a feeling once OS 10.2 is available you'll see apps such as this.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Safari wont start after i installed avi player any suggestions?

safari wont start after i installed a avi player any suggestions?

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

My System wont start after setting FSB to 200

My System wont start after I'd set my FSB to 200,
when the system starts, nothing comes up, and my Pc screen LED just blinks,
I have tryed to reseting the Bios but it doesn't help, have also tryed with new RAM and new Graphiccard but it doesnt help.
Please help me:-(
Am I resetting the Bios wrong? I set the jumper to safe mode and 100mhz, then I use the jumper to clear the CMOS. And the restart at set the jumpers back
3ghz AMD BARTON
NVIDIA nforce2 k7bn2 Delta
512 DDR RAM PCI3200
300WATT

Quote
Originally posted by roobster
set the multiplier lower , FSB(200) X multiplier (ex.10.5) = 2100 MHz , and your voltage raise it a bit too let say 1,700 ( default is 1.650 ) If this doesn't work at once , keep booting . My rig started up after 5 times . Strange but true .
does not work if he has a 3000.
they are multiplier locked.

Intel imac wont start after changing permission

intel imac wont start after i changed my hard drive permission to let me read and write, then i clicked apply to all enclosed files.i turned it off no problem. then it never started up again in os x. the grey screen with apple logo appears,then after a minute it restarts, and will keep doing that if i let it. i can start up in windows xp, but i dont know how to do anything in windows xp that will affect os x. i can use the hard drive in target mode, but i cant figure out how that can help me. i use a macbook to view target disk. ive spent hours looking through help and support. finally i do not have the os install disks. PLEASE HELP!

My apologies for the inept instructions.
Restart normally. Open Terminal in the Utilities folder. Paste the commands in the Terminal application to avoid typos:
sudo su
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen. Press RETURN again. Now paste each of the following at the prompt and press RETURN after each.
chown root:admin /Applications
chmod 0775 /Applications
chown root:admin /Library
chmod 1775 /Library
chown root:admin /System
chmod 0775 /System
chown root:admin /Users
chmod 0775 /Users
chmod -R -N /Applications
chown -R :admin /Applications/*
Again, my apologies.

770-G45 wont start after ShutDown

Recently installed MSI 770-G45, problem starts when i regulary shutdown comp. from WinXP or Win7 64-bit.Computer wont start after that, like ther is no power, fans dont spin, no bips, NOTHING. I got to unplug power cord and plugg it again into psu, after that it starts normaly.
Strange thing is that computer starts normally when i manualy shutdown system(holding the power button on the case).There is no exception, starts perfectly evry time after manual shutdown, no need to unplugg powercord.
Rest of my components> Phenom II X2 555BE, Kingston 2GB 1333mhz, Sapphire 5770, HDD WD 250gb,PSU Corsair TX 650w.
Tried to change power cord, tried other PSU, other case (tought its maybe power button but no), changed mobo battery, installed several OS versions (XP, Win7) and still dont have solution.
MS 7599 ver. 2.0
Bios version 10.2
MoBo is new bought it 3 days ago.
PLEASE HELP!!!!!

First: It is important to clear CMOS after a BIOS update. Unplug power cable before the clearing, as there can be no power in the system
Second: Rebuild the system, but outside the case. Use only PSU, motherboard, processor, one stick of memory and graphics card. If it works better then, you may have a short, from a stand-off too many, or poorly isolated wire somewhere.
But I second it sounds like a motherboard problem. You'd better contact the one who sold it to you.
Oh, an oldie thing! You will need to install Windows again, with the new motherboard and all.

SSMS wont start after Installing SQLServer

Hello,
After SSMS wont start after updating VS2012. I have unistallled and installed a number of times but the error message I keep getting indicates that Visual Studio shell Isolated is missing. I have tried to install this directly from the set up dvd but
no success.
Also I noticed that VSShell is missing in the C:\Program Files (x86)\Microsoft SQL Server\120\Tools\Binn.
I am assuming that this has something to do with it.
Can someone please tell me how to fix this?
Thank you.
here is the error message received

Hi,
Try the below solution and see how it works.
Note: Take a backup of the key before make any changes on the registry keys.
http://support.microsoft.com/kb/322756
Start regedit.exe
Go to HKEY_CURRENT_USER\Software\Microsoft\SQL Server Management Studio
Delete 12.0_Config
Restart ssms.exe
Here is the original thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/aeff13b3-3960-4724-bb9a-7e585651d7f4/sql-server-2012-error
Thanks.
Tracy Cai
TechNet Community Support

ATV2 - 4.2.2 Update - Video stream from desktop quits after 2 minutes

ATV2 - 4.2.2 Update - Video stream from desktop quits after 3 minutes after most recent ATV2 software update
ATV2 is connected wired to router, desktop is 802.11n

Reset ATV2, router, and desktop machine and everything appears to be working normally now.
False alarm.

HT5616 how do you change your apple id on your phone. Trying to update aps and it wont let me because its still using old apple id.

how do you change your apple id on your phone. Trying to update aps and it wont let me because its still using old apple id.

Delete them and then download them from the desired Apple ID. This may require repurchasing paid applications.
(104499)

Updated tracks using Get Info but not updated on iPod

Okay so I've been experiencing this problem for YEARS now and still no resolve.
If I want to make a changes to a track already on my iPod using "Get Info" in iTunes the change seems to update on iTunes but when I go to my iPod the change hasn't been updated. I know some people mention syncing it but I manage my music manually and I never store my music on iTunes. I have too may tracks to store on my computer. I only use iTunes to transfer music to my iPod after that I delete it from iTunes.
The only workaround I found is to delete the track from my iPod add it to the iTunes library make the changes there and then transfer it back to my iPod which is time consuming. I've found loads of threads on this dating as far back as 2007 but no definite solution.
Has a solution been found yet?
Thanks in advance.
Note:
iPod Touch 3rd Generation running iOS 5.1.1

Thanks lllaass for the update.
It used to work but it's been so long since it did I can't remember what year the problem first appeared. And I know it's not only me and surely Apple must be aware of this by now. What seems like such a small problem should have a solution/fix. I wouldn't mind but it's these little problems that keep cropping up and they are there for years with no resolution. It's just not good enough not when I think about how much I paid for my iPod.
*If anyone who comes across this thread has a newer iPod and has the same experience, could you let me know.

Post ios5 update -- videos for ipad2 wont start after adding album art using get info

Similar Messages

Maybe you are looking for