Post migration wrong IP
Transfer ID appeared to be successful, with the target taking over the name and IP of the source server. But after some problems and lots of hair pulling, I discovered that none of the OES services in Yast picked up the source IP. They still had the premigration target server IP. I've reset, but am still having problems with the cluster service. Is there anywhere else I need to check for the old IP? Thanks.
You may want to open an SR with Novell since you had problems with the post migration not changing the server name as well before.
I've not had it happen to me, but that doesn't mean it's not a bug somewhere.
Novell will probably want a supportconfig and the entire project directory log files as that'll contain the results of the changeip scripts and whatnot.
Perhaps you found a bug or there's something unique to your environment that's causing things to not work properly.
Similar Messages
-
MIRO Posting against wrong payment,as against default vendor payment terms
MIRO Posting against wrong payment,as against default vendor payment terms
Hi,
Go to MR8M, cancel that posting Document.
Go to payment tab while MIRO, Give the payment terms or delete the payment terms.
Now if u post as Invoice Gross - Document Type....system will ignore the discount and it will be come to effect at the time of payment.
if u take as Invoice -NET, System Will consider those discount at time of MIRO.
Hope Help U !
Regards,
Pardeep Malik -
sorry posted in wrong place
Edited by: user636526 on Oct 28, 2008 11:49 AMchessyy,
Sorry that you had this problem.
The software coupons are pretty much useless unless Apple says they are worth something for a very specific reason. In your case they will be worthless.
You do not tell us much about your iMac, but as you have 512-768M of RAM, 10-15% free Hard Drive space, and a 733-1GHz processor I would recommend that you Upgrade to Tiger. Be sure to read the iLife '06 System Requirements and Notes for your own edification.
Tiger can be purchased at AppleRescue for $79.00.
You can install it over iLife '06 using an Archive and Install. Software update will bring you to the latest version of Tiger.
I will mention this last, but it really should be your first step...backup your important files.
;~) -
How to Rectify Goods Return posted in wrong date
Dear Expert
Please guide me how to rectify the Goods return posted in Wrong Date.
Regards
Rajani patelDEAR GORDAN
I am talking about Purchase Goods Return based on GRPO then how can i rectify it
Scenario is like this
GRPO date:10th April 2010 and client has made Goods Return in 21th Sept 2010 instead of same date of GRPO
Regards
Rajani P Patel -
Wage type getting posted to wrong GL
Hello,
We have a problem with the Posting Program.
We have defined a service category field in the Org assignment infotype.(Indirect/Direct) based upon which the employee's salary gets posted to either Indirect GL or Direct GL's.
This functionality works fine in case the Posting program is run for single employee.However,when it is run for the entire Personnel subarea then for one particular employee salary is getting posted to wrong GL(Employee's service category is direct but the salary is getting posted to indirect GL).
Could anyone please help me understand what could be the possible reason behind this and how to fix it.
Thanx
SushilHi
If it is happening with only one employee
Check the employee data once again
while asign the Master cost center....... which display in the infotype 0001 and also check if any entries are maintained in the Infotype 0027
Hope it will help
Regards
rajeshk -
BW on HANA : Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.
We are trying to copy database from SAP BW7.0 to SAP BW on HANA 7.4 SPS6 so we are in search for list of steps or activities during database copy both pre and post steps.
Along with the above we are in search of Pre and post migration steps ones database is transferred successfully from oracle to HANA on 7.4 SPS6.
Kindly help us in getting the exact course of action as requested.
Thanks and Regards,
Lavina JoshiHi Lavina,
try this link for starters: Upgrade and Migration - BW on HANA | SAP HANA
Points to remember are:
Preparation:
-- Hardware Sizing
-- Preparation of Data Centres
-- HANA Hardware preparation
-- System Landscape Readiness (upgrade software downloads, system readiness checks, etc)
-- House Keeping activities on BW system (data clean up, etc)
Post Installation:
-- Sanity checks / Preparation and License checks
-- JAVA Configurations
-- Infoprovider conversions
Overall Stages are described below:
# Environmental setup (HANA box)
-- Initial system checks and Building Activities (system copy, Appln server setups, etc)
# System readiness
- ZBW_HANA_COCKPIT Tool
- ZBW_HANA_CHECKLIST Tool
- ZBW_ABAP_ANALYZER Tool
- ZBW_TRANSFORM_FINDER Tool
- SIZING Report
- System Clean up Activities
- Impact of 7.4 on source system checks
- Java Upgrade for portal
# DMO Stages
- Preparation & Pre Migration checks
- Execution / Migration
- Post Migration Activities
# Testing Phase
- Source system checks/Activities
- System and Integration Testing
- End to End Testing
- Performance testing
- Reports
- BO reports / Interfaces
Do let me know if you require any further information.
Regards,
Naren -
Hi,
We are facing issues post migration issue in 11.1.1.1.5.
We are using JMS adapter with 3rd party Queues (IBM MQ). We are able to produce and consume the messages in 11.1.1.1.3. But, post migration to 11.1.1.1.5, we are able to only prouce the messages and not able to consume the same.
We use JMS message id as Correlation id.
Please assist us on this.
Thanks!and not able to consume the same.Do you see any error in log? Paste the error info here. Alternatively, you may log a SR with support.
Regards,
Anuj -
Depreciation posted for wrong GL
Hi Sap experts,
My issue is "Depreciation posted for wrong GL" --(periods-4th,9th and 12)
Here my client is maintained 01for book depreciation area and 11-for IFRS depreciation area
Actually Depreciation posted as:-Depreciation a/c Dr 1000/-
Accumulated p&m Cr1000/-
Above entry appearing in 11-IFRS depreciation area,but depreciation value amount showing in 01 book dep. area.
Client requirement is dep.value has to appear in 11-IFRS depreciation area.
One solution -
-is wrongly GL assigned for IFRS in a/c determination-AO90 transaction.
Second scenario--- is how these depreciation value adjustment for IFRS for correct GL code.
Best Regards,
Thirupati,Hi
please check in SCMO the log to the depreciation posting run, there you will see all the FI-documents created by the depreciation run.
Best Regards,
Blaz -
JET/DAO 3146 error on post migration
I had a urgent issue that held their development. I would appreciate if someone can help me on this.
I was trying to migrate access 97 database to Oracle database. Here is environment,
Access97
Oracle 8163
Microsoft ODBC for Access 4.00440302
Oracle ODBC for Oracle 81700
I had a problem in the post migration when WorkBench tried to update Access Database (to create the global link or
something like that). It failed with an ODBC error: JET/DAO error code: 3146, description: ODBC--call failed.
Does anyone know what does it mean on this error and what could have caused this?We are currently looking into this issue. Looks as though it may be related to Office 2000.
-
posted in wrong thread
Edited by: user642786 on Feb 15, 2011 12:25 PMJust download the SunONE Web Server or Application Server and you will be able to run JSP if you got W2K or XP.
-
Deleted, posted in wrong section.
Deleted, posted in wrong section.
Message was edited by: Jeff VaderALSO, cleaning....
http://www.maximumpc.com/files/u69/MSI_GX740.jpg
the area on the bottom surrounding the mouse sensor, anyone find a good way of cleaning that? everything i've tried leaves marks or is ineffective....
this was the result of my attempt to clean it looked worse
even bought a "micro-fiber" lens cleaning sheet...bought a few actually--different brands. didn't really help. -
Trouble with Post Migration Scripts
I try to run the volrepair script but am getting errors. I have run the Update NDS option from nssmu but still now luck.
ccs_fs1:~ # /opt/novell/migration/sbin/serveridswap/scripts/repair/volrepair.rb -a admin.ccboe -p darabc -f /var/opt/novell/migration/
Information: Checking NSS status ...
Information: Getting GUID for NSS Pool ADMIN
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_ADMIN_POOL)(objectClass=nssfsPool)) " "g uid" -W
Error: Failed to get guid for pool ADMIN
Information: Getting GUID for NSS Pool APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_APPS_POOL)(objectClass=nssfsPoo l))" "gu id" -W
Error: Failed to get guid for pool APPS
Information: Getting GUID for NSS Pool SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_SYS_POOL)(objectClass=nssfsPool ))" "gui d" -W
Error: Failed to get guid for pool SYS
Information: Getting GUID for Volume APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_APPS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume APPS
Information: Getting GUID for Volume SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_SYS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume SYS
Information: Updated NSS Pool objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Information: Updated NSS volume objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Warning: The following NSS Pools does not exist on the source server. Use "nssmu " option "Update NDS" for these Pools to repair.
Warning: ADMIN
Warning: APPS
Warning: SYS
Warning: The following NSS Volumes does not exist on the source server. Use "nss mu" option "Update NDS" for these Volumes to repair.
Warning: APPS
Warning: SYS$(UYou need to have the same set of pools and volumes on the source server and target server (atleast the names should be identical).
The error says the pools or volumes that exists on the target server doesn't match with those on the source server.
Try updating them from nssmu or iManager.
Refer section "9.0 Preparing for Transfer ID -> 9.1. Prerequisites " of http://www.novell.com/documentation/....html#bookinfo
-Ramesh
>>>
From:
dmilam<[email protected]>
To:
novell.support.open-enterprise-server.migration
Date:
05/03/2010 11:06 PM
Subject:
Trouble with Post Migration Scripts
I try to run the volrepair script but am getting errors. I have run the
Update NDS option from nssmu but still now luck.
ccs_fs1:~ #
/opt/novell/migration/sbin/serveridswap/scripts/repair/volrepair.rb -a
admin.ccboe -p darabc -f /var/opt/novell/migration/
Information: Checking NSS status ...
Information: Getting GUID for NSS Pool ADMIN
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_ADMIN_POOL)(objectClass=nssfsPool)) " "g uid" -W
Error: Failed to get guid for pool ADMIN
Information: Getting GUID for NSS Pool APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 ..6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_APPS_POOL)(objectClass=nssfsPoo l))" "gu id" -W
Error: Failed to get guid for pool APPS
Information: Getting GUID for NSS Pool SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_SYS_POOL)(objectClass=nssfsPool ))" "gui d" -W
Error: Failed to get guid for pool SYS
Information: Getting GUID for Volume APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_APPS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume APPS
Information: Getting GUID for Volume SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_SYS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume SYS
Information: Updated NSS Pool objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Information: Updated NSS volume objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Warning:The following NSS Pools does not exist on the source server.
Use "nssmu " option "Update NDS" for these Pools to repair.
Warning: ADMIN
Warning: APPS
Warning: SYS
Warning: The following NSS Volumes does not exist on the source server.
Use "nss mu" option "Update NDS" for these Volumes to repair.
Warning: APPS
Warning: SYS
dmilam
dmilam's Profile: http://forums.novell.com/member.php?userid=11991
View this thread: http://forums.novell.com/showthread.php?t=409414 -
Sorry for posting a wrong question Loading multiple files!!
Sorry for posting a wrong question Loading multiple files!!
As per my understanding
Sorry for posting a wrong question Loading multiple files!!
As per my understanding only a standard Dat file can be compared with one single dat file.Because Eacg dat file will be containing its own values. So multiple files cannot be compared.
Am assuming dat files containing time(s) and acceleration values(g). G value for each file differs.
Thanku!!
Solved!
Go to Solution.Hi Rash.patel,
I'm still not sure I follow you. When you say "Dat" file, do you mean the DIAdem 8.x standard file with the *.dat header and usuall a *.r64 binary file or two that it references, or do you mean some other specific data file with the extension *.dat or do you just mean a generic data file?
DIAdem can certainly load multiple files into the Data Portal at the same time, so you must be referring to either a limitation of the "*.Dat" file you're talking about or correcting yourself that all the data you want to compare turns out to be in one "Dat" file.
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
How do restore factory settinngs ( macbook pro retina) after i used migrate wrongly
how do restore factory settinngs ( macbook pro retina) after i used migrate wrongly. and want to start from the original
Use Lion Recovery to reformat the drive.
-
Migration to UCM11g: Profile rules get messed up post migration.
Hi,
We are trying to migrate from UCM10gR3 to UCM11g. We are facing problems when importing the content archive into ucm11g install.
Import failure happens due to wrong set of rules getting applied during the import, i.e. some inconsequential metadata fields becoming mandatory while fields that needs to become mandatory don't.
How do i debug the source of the problem. I have done the following until now.
Verified the CMU import from 10gR3 for errors, and everything seems to have come through fine. Did not see any issues there.
Post import, compared profile rules between 10gR3 to 11g, and they match line to line. I dont see any difference at all between 10gR3 and 11g.
Enabled profile tracing and compared the logs when checkin happens in 10gR3 and 11g, Rules getting initialized and activated as same other than the final import exception that we see in case of 11g. Following is the exception.
Caused by: intradoc.common.ServiceException: !Please enter Keywords.
at intradoc.shared.MetaFieldData.validate(MetaFieldData.java:214)
at intradoc.server.DocServiceHandler.validateMetaData(DocServiceHandler.java:1792)
... 44 more
Is there anything else that i could do to identify the source of the problem. Kindly consider this as an urgent request, any pointers will be helpful.
Thanks and Regards,
Seshan K.Hi Romain,
Following is the original error message. Have you faced something like this.
!csDbUnableToExecuteQuery,IdsDocMetaDataDocMeta(INSERT INTO DocMeta(dID\,xComments\,xExternalDataSet\,xIdcProfile\,xPartitionId\,xWebFlag\,xStorageRule\,xCollectionID\,xHidden\,xReadOnly\,xInhibitUpdate\,xForceFolderSecurity\,xWCTags\,xWCPageId\,xWCWorkflowAssignment\,xWCWorkflowApproverUserList\,xWebsiteObjectType\,xWebsites\,xDontShowInListsForWebsites\,xWebsiteSection\,xRegionDefinition\,xLanguage\,xCountryName\,xParentId\,xKeywords\,xPremiumContent\,xEventDate\,xEventEndDate\,xProductName\,xPublishDate\,xCreateDate\,xFriendlyURL\,xLogicalContentType\,xSubLogicalContentType1) VALUES(24058\,'GENERALTAB_CDF'\,''\,''\,''\,''\,'default'\,0\,'FALSE'\,'FALSE'\,'FALSE'\,'FALSE'\,''\,''\,''\,''\,'Data File'\,'it'\,''\,'it:1376'\,'DV_RD_GENERALTAB'\,'it'\,'IT\,CH'\,''\,'COLT Managed IT Services (Technical Overview)'\,'No'\,null\,null\,''\,null\,null\,'colt-managed-it-services-technical-overview-it.htm'\,'Web Asset'\,'Central Module'))!$ORA-29861: domain index is marked LOADING/FAILED/UNUSABLE
run: 1.39 ms. total 3.72 ms. [ORA-29861: domain index is marked LOADING/FAILED/UNUSABLE
Closing active result set
Closing statement in closing internals
rollback tran
!csImportErrorForArchiveInCollection,All_contents_Prod,IDC intradoc.common.ServiceException: !csServiceDataException,INSERT_NEW,Imeta!$
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2337)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2331)
at intradoc.server.Service.createServiceException(Service.java:2326)
at intradoc.server.ServiceRequestImplementor.handleActionException(ServiceRequestImplementor.java:1766)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1716)
Regards,
Seshan K.
Maybe you are looking for
-
My iTunes won't open after partial upgrade.
Hello, I recently tried to download the latest version of Itunes but got a message during the middle of download saying I didn't have enough memory to complete it. I immediately hit cancel and now my Itunes won't open! Everytime I try to open it I ge
-
* of 165 files to be updated, but won't put them on
I am trying to add new songs to my new iPhone and they will not go across from my itunes, i continue adding other songs and the number of 'files being updated' increases but never gets smaller
-
All-in-one 6300 series error message "door open" .
I've removed the door in the back, turned off the printer, waited, and started it back up. I did troubleshooting and nothing seems to remove the error message. The forum had a post and answer for a different machine so I hope there's a solution for
-
Repair Home Directory Permissions in Lion
I currently have my home directory on it's own physical disk (not in the default location on my OS drive). When I try to "reset home directory permissions" against my user account in OS X Lion, nothing happens. When I do it for a user who has his hom
-
why when you get an mms does it not play the sound with the message...it only gives you the option to save it or set as ringtone. Then if you do save it you cannot delete it..UGH..Does any one know how to fix this problem?