Post more than Costing Method to MAC

Hi All,
can i post more than costing method to mac at the same time
assume that i have two warehouses ,one = standard method and the onther = Actual method and i want to post the inventory transactions to the MAC
is it possible
thanks
best regards
Amr Hussien

Hi Amr
You cant post one transaction with two different costing methods. ie. If you have inventory transaction then you can post this only with one cost method. However, you can (THOUGH NOT RECOMMENDED AND HAS POSSIBILITY OF ERROR) do post certain transactions say production with one cost method and inventory with actual. The cost that is picked up by MAC is the one that comes in as GL Cost. The GL Cost is picked up based on the costing method defined in the fiscal policy. Each time you run the GL Cost Update you would have to change this and then run the GL Cost Update.
Regards
Girish

Similar Messages

Subcode cost posted more than budgeted amount.

Hello PS Experts,
I have one query regarding we budgeted one subcode 4000 usd on 11/03 after user suplmented 8000usd on 23/03 but when he was supplemented wbs suplement status is inactive, after that user posted more than budgeted amount 30000 usd.
When we are checking report it is showing minues 18000 value because in budgeted status assigned value is 30000 distrivuted value is 12000.but when i am checking subcode availabity activation or not,it is showing activated.
If budget availability control is activated system can not be allow to post more than budget?
But if am checking cj20n status 23/03 budget supplement is inactive.
How the user inactive the supplement budget,?
May be the reason system allowed to posting more than budget.Anybody can share your valuable inputs.
Regards,
Nivas.

Hi Srinivas,
Please do the following:
1. Check your settings for Tolerance Limits for AVAC.
2. Check if any cost elements are maintained for exemption list from availability.
3. Check the Availability analysis report using CJ30. And see if any cost is getting posted using Cost Elements which are in Exemption list.
4. Check how the postings were made to the WBS where you have more actual cost then budget? Is the tolerance limit setting maintained for all targets or some selected ones..
Hope it helps you..
Cheers
Sammar

How to post more than one photo on blog page

Can you post more than the top placeholder photo on a blog page? I'd like to post photos as they relate to the blog I'm writing but can only use the placeholder photo at the top of the entry page--is it possible to place more photos on the page or do you have to use a web layout and not a blog layout?
Thanks.

It is possible because I Do it on my blog. All you have to do is click he media button and get the photo you want, I then drag it to the desktop, and then drag it into my blog. For some reason iweb can get a little wonkey and makes it look like it can't be done, but it can. Good luck!
http://web.mac.com/skewedreality04

Posting More than 900 lines not allowing uploading using BDC for FB60

Hi,
When i am upload vendor invoices with More than 900 lineitems using BDC program it is giving the fallowing error .
1 You are entering line item 900 , a maximum of 999 line items are defined
As per i know it will allow 999 line items for one document posting . But i am getting error when i am posting more than 900.
If any body know the solution please share with me .
Thanks
SriHari

I vaguely remember that SAP reserves lines for automatically created items e.g. for taxes, you might have run into that limit. Check in that direction with a functional expert, the limit might be configurable.
Thomas
Edit: now I did what you could have done and checked the where-used-list for message F5 138, the 900 is hard coded, and it is just a warning, seemingly to alert the user of the brick wall he is about to hit very soon.

Its not allowing to post more than 10 questions

hi frds
while im posting a questions in forum im getting message like you cant post more than 10 questions.
why its showing please give me the solutions.
regards
soraj
Moderator: you need also to close your messages which have been answered.

Hello ,
Please consider using a check table for the characteristic involved if you are working with large
number of values assigned
With a check table you have a possibility to work with a huge amount of values , also the performance should improve
Please refer to the link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/ec/62ae27416a11d1896d0000e8322d00/frameset.htm
Section - Entering a Check Table
Hopefully the information helps
Thanks
Enda.

Syncing more than one Calender to .mac

is it possible to sync more than one calendar to .mac so they both appear on the same URL?

VictoriaSueno,
Yes it is possible.
Publishing calendars to .Mac says: If you're using iCal 2.0 or later, you can create Calendar groups and publish them to .Mac. If you publish a Calendar group, all the events and To Do information from the calendars in the group is merged and published in one calendar. You can also choose to publish individual calendars in the group.iCal Help in Organizing your calendars says: Choose File > New Calendar Group, and name the calendar grouping. Then drag any calendars that you want to add to the group.
Tip: You can also create a new calendar group by pressing the Shift key on your keyboard and clicking the Add button in the lower-left corner of the window.
;~)

Why can't I post more than about 45pic. on Facebook

Hi,
When I am in Aperture and I want to post pictures on Facebook I can not post more than about 45 at the time in one album. Is that a limit impose by Facebook, or is it the size of my files? Most of my pictures are in Raw, Do i need to convert them to Jepg first? If someone could give me some insight?
Thank you
Normand

You may be running out of space; don't forget the iPad need approximately 2 GB of working space.

PRoblem when posting more than one document

Hi all,
I'm using BAPI    BAPI_GOODSMOVEMENT_CREATE to post the documents for PO_GR.when i post one document through text file it is done succesfuully. when i'm posting more than one document it is giving error "posting not possible".
My code is as follows:
loop at i_data.
concatenate '0'   i_data-stor_loc into i_data-stor_loc.
concatenate '00' i_data-plant     into i_data-plant.
    i_item-po_number = i_data-po_no.
    i_item-po_item    = i_data-po_item.
    i_item-move_type = i_data-mvt_type.
    i_head-doc_date   = doc_date.
    i_head-pstng_date = post_date.
    i_head-ref_doc_no = i_data-del_note.
    i_item-entry_qnt = i_data-entry_qty.
    i_item-stge_loc   = i_data-stor_loc.
    i_item-plant      = i_data-plant.
    i_item-stck_type = i_data-stk_type.
    i_item-batch      = i_data-batch.
I_ITEM-move_val_type      = i_data-move_batch.
    APPEND: i_item,i_head.
    CLEAR:i_item.
ENDLOOP.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
   EXPORTING
     goodsmvt_header             = i_head
     goodsmvt_code               = i_code
   TESTRUN                     = ' '
IMPORTING
GOODSMVT_HEADRET            =
    MATERIALDOCUMENT            = matdoc
   MATDOCUMENTYEAR             =
   tables
     goodsmvt_item               = i_item
   GOODSMVT_SERIALNUMBER       =
     return                      = return
IF return IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
LOOP AT return.
    WRITE: return-message.
ENDLOOP.
WRITE: matdoc.
PLease specify where i'm going wrong.
Regards,
SImha.

Hi,
I had used the same FM to post multiple documents, but never faced this error.
*- Header
MOVE: sy-datum TO bapigm_head-pstng_date,
        sy-datum TO bapigm_head-doc_date,
        sy-uname TO bapigm_head-pr_uname,
        v_mblnr TO bapigm_head-ref_doc_no,
        con_bfwms_bestand TO bapigm_head-ext_wms.
*- Item
*- Populate item data
LOOP AT i_items_trans.
    CLEAR ibapigm_item.
*- Convert the matnr backto 18 char form (External)
    CALL FUNCTION 'CONVERSION_EXIT_MATN2_INPUT'
      EXPORTING
        input            = i_items_trans-matnr
      IMPORTING
        output           = i_items_trans-matnr
      EXCEPTIONS
        number_not_found = 1
        length_error     = 2
        OTHERS           = 3.
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ibapigm_item-material   = i_items_trans-matnr.
    ibapigm_item-plant      = i_items_trans-werks.
    ibapigm_item-stge_loc   = i_items_trans-lgort.
    ibapigm_item-move_type = '101'.   "Goods Receipt
    ibapigm_item-mvt_ind    = 'B'.     "Goods Movement for PO
    ibapigm_item-po_number = i_items_trans-ebeln.
    ibapigm_item-po_item    = i_items_trans-ebelp.
    ibapigm_item-entry_qnt = i_items_trans-ktmng.
    ibapigm_item-entry_uom = i_items_trans-meins.
    APPEND ibapigm_item.
ENDLOOP.
*-Call FM
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header = bapigm_head
      goodsmvt_code    = bapigm_code
    IMPORTING
      goodsmvt_headret = bapigm_headret
    TABLES
      goodsmvt_item    = ibapigm_item
      return           = ibapigm_ret.
*- Commit on Success
IF NOT bapigm_headret-mat_doc IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Regards,
Raj

Incoming Payment - Posting more than 999 line items through EDI

Hi guys,
I having following issues.
1. incoming 820 is not posting into customer a/c even I configured processing - REMC but creating payment advice
2. once i tried to process payment advice by using f-28 it is posting in to custmer a/c without payment advice ref. also the payment advice still exist in the system.
3. trying to post payment advice having more than 999 items by using f-28 system shows error after 999 items.
4. I tried to process payment advice executing through RFAVIS40 error displays "Payment advice note in Customizing not defined for posting"
I appreciate if some one guide me to solve above.
Thanks,
RK
Message was edited by: RK Talabathula

Hi RK,
Pt 3: There is an SAP Notes on this issue 117708 ,
also refer Re: F-44 - Clearing of more than 999 line items
Pt 4: Check OSS note 17449 see for "Payment
advice upon form overflow"
hope this helps.
Please assign points as way to say thanks
Ravi Rana

Mac More than Mini, the Missing Mac medium range

Please Apple folks, come up with a Mac More than Mini, that can be expanded with a top of the range graphics card! I have been using Macs since the Mac Plus came, but have never bought the more exspensive Macs. Right now I have 4 Macs on the shelf, latest is a Mac Mini Core Duo with 2 GB ram. But I am in need for a much better graphics card, I don't want a Mac Pro, too big and expensive, I don't want a MacBook and I don't want an all in one iMac.
The programs I use is Revolution and Concepts Unlimited, both are in Mac and Windows versions. What do I do? I can wait for a Mac Medium or switch to PC.

We are users just like you, and it is unlikely Apple will see your request. Send your suggestion to http://www.apple.com/feedback and select the Mac mini.
Have a nice day.
Boyd

Making an int() return more than one method?

hey people. i need an int, for example,
public int someInt(){
return 1000;
}to return more than one number. To clarify, i need to be able to call the int() and it return me three different values. Is this possible?

BigDaddyLoveHandles wrote:
Word origins: guru
Hmmm... "Heavy, weighty"
Reminds me of a t-shirt my brother has. He's a rather portly gentlemen. The shirt has a picture of Buddha and the caption, "I have the body of a god."

How to block invoice posting more than the GR quantity

Dear Experts,
While trying to do MIRO with more than the PO/GR quantity system is accepting both increase in qty and value with out any tolerance limit.
How to block, so that system should not allow to do MIRO more than the GR quantity.
Regards,
Alok

Hi,
System will by default block the payment, when it is not matching with the PO/GR value.
then you have to go transcation code MRBR - Release Blocked Invoices. so that you can make the payment for these invoices.
system will give you the message before saving, if you want an error message then go to oba5 tcode and change the message in to error, then if the Amount is not matching with the PO/GR value then the system will through error.
Regards,
Padma

KSV5 - Actual distribution post more than one document

Hi!
I've posted a cost center cycle actual distribution by using KSV5 transaction, cost center group and cost element group. The sys post two or more CO document insted of one and not in a progressive way. Why?
Is it a bug of the system?
Thanks
Giovanna

Hi Giovanna,
As I said, it's normal and should not pose any problem for you. Anyway, if you reverse, for example, the entire cycle results, the system will know to treat all the documents in question via the connection stroed in T811D table. The factors for creation of multiple documents could be various: number of items, controlling subkey value, auxiallary account assignment, etc.
For the 'jumping' of document numbers I wouldn't worry too much as well (though, this issue could be treated via SNR0 transaction), since it's internal CO documents and not FI. In some countries there are regulations which demand consequent document numbers, but this concerns only 'official' FI documents posted in general ledger.
Regards,
Eli

More than one site on .Mac

This may be a stupid question but...
Can I have many seprate sites (made on iWeb) on one .Mac account ? (One for my buisness, one private, and one for my band, etc..)
(Posted this on the .Mac discussion, but don't seem to be alot of activity over there so I give it try here.)

Yes, you can have as many sites as you want. The urls will look like
web.mac.com/username/iWeb/site1
web.mac.com/username/iWeb/site2
etc.
In iWeb you just do File > New Site.

Combining more than one method

Hi all,
I am trying to combine the below method 3 times and piece together the resulting characters (ieAAA),
Random rand = new Random();
int num = rand.nextInt(10);
char myChar = (char) ('A' + num);
System.out.println("The random string is: "+myChar);
I have tried,
Random rand = new Random();
int num1 = rand.nextInt(10);
int num2 = rand.nextInt(10);
int num3 = rand.nextInt(10);
char myChar1 = (char) ('A' + num1);
char myChar2 = (char) ('A' + num2);
char myChar3 = (char) ('A' + num3);
System.out.println("The random string is: " myChar1, myChar2, + Char3 )
Obviously does not work. Any suggestions?
Stona

well, the problem is that you are using commas in the last statement, try this:
Random rand = new Random();
int num1 = rand.nextInt(10);
int num2 = rand.nextInt(10);
int num3 = rand.nextInt(10);
char myChar1 = (char) ('A' + num1);
char myChar2 = (char) ('A' + num2);
char myChar3 = (char) ('A' + num3);
System.out.println("The random string is: " +myChar1 + myChar2 + myChar3);Or if you want, it may be:
Random rand = new Random();
String string = "";
for (int i = 1; i <= 3; i++) {
     int num = rand.nextInt(10);
     char myChar = (char) ('A' + num);
     string = string + myChar;
System.out.println("The random string is: " + string);

Post more than Costing Method to MAC

Similar Messages

Maybe you are looking for