Post Moved Back-to-basics
Moved http://community.bt.com/t5/BT-Infinity/Back-to-basics/td-p/695936
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’
Hi Sri,
Before Release 4.0A, ABAP stored the content of internal tables in a combination of main memory and file space. This means that the maximum size of all internal tables of all programs running on such an application server at one time is about 2 GB. With Release 4.0A or greater, this size decreases to about 500 MB. (Note that those values aren't fixed, but this is a good guide. This minimum of 500 MB is the lowest limit of the real value, which varies among different operating systems and even among different releases of the same operating system.)
It may sound strange that a newer release has a higher restriction on capacity. But it's a consequence of the fact that the contents of internal tables move from a reserved file to shared memory. When you process internal tables this way in Release 4.0A or greater, you pay for much better performance with a smaller potential size.
Captured in the 2-GB trap of a 32-bit operating system, you have to redesign your program in a way that the complete data is split into different logical parts that each, on its own, can be processed by ABAP.
http://www.sapinsideronline.com/archive/volume_01_(2000)/issue_01_(june)/v1i1a12.cfm?session=
Regards,
Vinay
Similar Messages
-
I bought my Iphone4S from australia and then moved back to my country which is India. Two days back "GAMES" catogeries was missing from the app store. I have no idea why it went gone missing.I have tried to signing in the app store several times but stil it doesn't show the GAMES catogery. Help me out.
Try what Terence Devlin posted in this topic:
Terence Devlin
Apr 14, 2015 11:21 AM
Re: Is Iphoto gone ? i want it back!
in response to Johannes666
Recommended
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
Post Moved Illegal use of my broadband
Post moved http://community.bt.com/t5/Other-BB-Queries/Illegal-use-of-my-broadband/td-p/606892
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’DS wrote:
Andy_N wrote:
DS wrote:
pottyperson wrote:
I doubt that other contributors will be able to offer a solution
Well, as I mentioned before, if it's a HH2 and the rear of it is in view of the public, then every Thomas, Richard and Harry will be able to see the wireless key and make full use of the Internet.
Hi.
Although possible, that's not entirely true. If the user has altered the wireless key, then viewing the back of the hub will not help
But how many out there in BT land actually do change it?
BT only prompt the user to change the default admin password if and when they first access the hub.
At least BT thought about the label design on the HH3, keeping it hidden until needed.
I reckon hardly anyone would change the wireless key to be honest , but I wonder how many leave them in a window ...
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures -
Post Moved BT Broadband Desktop help problem
Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/BT-Broadband-Desktop-Help-problem/td-p/46973
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’Hi FrankC
I am sorry this still a problem.
If you could drop me an email please with your BT account and telephone number along with a link back to this thread I'll get this sorted out for you.
Just send to the address in my profile.
With regards to the thread being marked as solved as the original poster you can unmark the thread as solved. Just select 'Options' at the top right of the post. KerryG has posted up a pretty useful guide on this here.
Cheers
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Post Moved reinstalled windows and now BT net pro...
Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/reinstalled-windows-and-now-BT-net-protect-won-t-install...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’Before going back to McAfee, you might do well to stick with MSE for a while to see how it goes. A search of these forums will show that many people have moved in the opposite direction, and to my knowledge none have regretted it. More here: BT Forum AV Advice .
You can click the white star next to this message if you think it was helpful. -
Scan scan bar on the printer is continuously moving back and forth.
The printer is connected via USB to a computer using Vista and also used remotely by a MAC, IPad, and IPhones.
The scan bar on the printer is continuously moving back and forth, I ran the HP Print Scan Doctor and it found no problem.
I can print, copy, and scan but the motion of this piece on the device will not stop.
No change to the issue occurred when I turned the printer off, waited several hours, and turned it back on.Hi @GGx3,
Welcome to the HP Forums!
I noticed that the scan bar on your HP Officejet pro 6830 printer is continuously moving back and forth. I am happy to look into this scanning issue for you!
First, I would recommend a hard reset, by going to this post, How to perform a Hard Reset, by @Rich1. it is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. Please, see this article, Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector for more information. This applies to Inkjet printers as well.
After the hard reset, I would go through this guide, The HP Printer Does Not Turn On or Respond When the Power Button is Pressed, and watch this video:
(Even though the guide title may not match your issue, I believe the solutions will help.)
The last step I would do is to also make sure your printer's firmware is up-to-date. Getting Printer Updates for HP Officejet 6810 and Officejet Pro 6830 e-All-in-One Printer Series.
Hope this solves your problem, and have a good day!
“Please click the Thumbs up icon below to give me a virtual high-five for responding.”
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Post Moved Should-I-Change-To-BT-Infinity
Post Moved to Infinity board http://community.bt.com/t5/BT-Infinity/Should-I-Change-To-BT-Infinity/td-p/660450
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’Been for a walk and managed to find what I think is the cabinet. I actually found two. The first is about 3ft tall by about 4ft wide, dark green and looks like it's been there a while and the second is about 5ft tall by about 4ft wide, a lighter green, has air vents, sounds like it has a fan and looks like it's fairly new. The grass around it still hasn't grown back and it looks like the road near it has been dug up but only by about 1ft wide and 10ft long.
The cabinet is 0.45 or 0.42 miles, depending which route I take, from my house. So between 600 & 700m away assuming it follows the road. The direct distance is only 0.22 miles so about 330m.
Is it likely that the 6/700m is correct or do the lines tend to deviate much more than this thus increasing the distance? I was also wondering if there are any other factors I should consider. Eg I am on a small side road and upto a few years ago couldn't get broadaband. The road is only about 50yds long with 8 houses and this applied to all of us yet, everyone surrounding us including the first house at the top of our road could get broadband. BT said it was due to distance from exchange and the fact that the line took a 90 degree turn onto our road which caused the problem.
Thanks -
Post Moved Broadcom WLAN 802.11g "No signal" sinc...
Post moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Broadcom-WLAN-802-11g-quot-No-signal-quot-since-installi...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’it could just be the wireless software isn't detecting a signal. what i used to do when i used windows was ( from memory, i no longer use windows since 2004 )
1 ) insert the hardware
2 ) boot windows
3 ) it will detect new hardware
4 ) when it asks for drivers,insert cd
5 ) point windows to the devices driver folder on the cd
6 ) windows installs driver,then asks to reboot
7 ) after reboot,use windows to manage your wireless connections.
used to work all the time, give it a try,YMMV, any problems report back with any errors/problems and i will try and help
free your computer, use opensource
i'm a linux user & very happy about it -
Post Moved New-to-BT-Infinity-only-just-works-an...
Post Moved toInfinity Board http://community.bt.com/t5/BT-Infinity/New-to-BT-Infinity-only-just-works-and-only-1Mbps/td-p/866208
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’They installed a new master socket etc when they put the modem in. There is no phone plugged into the master but there are 3 phones AFTER the master socket (extension terminals inside socket, after filter I guess) . I think they tried it with all those disconnected. As for the signal, I mean the DSL light takes ages to actually come on and sync. I don't use wireless here. I have a long Cat5e cable from modem to bt hub then 2 computers and a CCTV box coming off the hub via LAN.
Property is a farmhouse on unmade track with no other properties nearby served by the phone wires. We are approx 1000m from the main road. I think if they could connect the wires into the cabinet at and of my track they might get the claimed speeds. I did a test using a known phone number of a house near that cabinet and it came back as 64mbps quoted , so theres obviously fibre in that cabinet.
One more thing, there is currently broadband on another line in the same cable coming up my track, which is on my business line, I have kept this running but when infinity working better it can be cut off. I wonder if there could be any interference from one pair of wires to the other having 2 broadband signals travelleing 1000m together. Probably not but just trying to think of everything. -
Post Moved BT don't guarantee Wireless Connections
Post moved to the Lounge http://community.bt.com/t5/The-Lounge/BT-don-t-guarentee-Wireless-Connections/td-p/553439
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’Help | A-Z
Wireless
Broadband
Home Network
Port Forwarding
System
Basic Settings
Internet
Connection
VPN
Dynamic DNS
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
2 days, 03:25:11
Downstream:
3.961 Mbps
Upstream:
939.8 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.3 Annex A
Latency type:
Fast
Noise margin (Down/Up):
10.1 dB / 6.0 dB
Line attenuation (Down/Up):
46.7 dB / 28.6 dB
Output power (Down/Up):
19.1 dBm / 12.6 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
14055 / 382
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
11028 / 385
Error Seconds (Local/Remote):
461931 / 3753
Hide details
Software version 4.7.5.1.83.8.57.1.3 (Type A) | Time and date 20:17 25/06/12 -
hi
I am having zero stock on 13.11.2008. I did MIGO(101) date is 13.11.2008. My system allowing me to issue material on 5.11.2008. So that my stock came in negative. i am not getting any error if i am posting in back date in same period when there was no stock. Can i know which msg nor should i have to activate or any other way to me that user will get error while posting in back date?
Thank you
Sameerhi
plz check u might activated OMJ1 - Allowing Negative Stocks.
http://www.sap-basis-abap.com/mm/how-to-use-negative-stocks-and-its-purpose.htm
regards
kunal -
I am moving back home to live ,currently I have ipad2 ,4s iPhone ,wife 4s and daughter iPhone 5 ,pad 4th gen and iPod touch ..all different iTunes account s but only one invoice which is mine ...can we share and if so how ?
How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
Cheers, Tom -
i have an iphone 3G 16GB 4.2.1 - i moved back to canada and got telus mobile service. they cant get phone working because cellular data network tab/button is not on my phone. How do i get it on there
OK. T-Mobile is NOT owned by AT&T... yet... The deal hasn't gone through yet. T-Mobie's US network is not compatible with the iPhone. Lots of things don't work right. There is not, and never has been an unlocked 3G sold in the US. Don't know where the phone originated, but more than likely it was in the US. If that's the case, the phone has been hacked/jailbroken to get it to work.
Have you tried doing a restore or restoring the phone as new? I have to warn you, if you do so and the phone is hacked/jailbroken, it will re-lock to AT&T and will become unusalbe. I think your best bet right now might be to save yourself a lot of grief and just upgrade to new phone from a legitimate source.
I would never even consider buying an iPhone on ebay. 99% or more are hacked, jailbroken and/or stolen. -
How to restore my 2 mail acc. after incorrectly moving back .plist file ?
This morning my Mail was quitting 5 sec. every time time I opened it. I moved com.apple.mail.plist file to trash, started Mail. I got a message that one of my mail boxes(don't remember which one..) will be renamed.
I guess I made a mistake by opening Mail and not Mail.app ?
Closed Mail and moved back .plist file into Library/Pref.
Here I made another mistake by dragging incorrectly, it was placed into some other program. I deleted the other program, and moved the .plist into Library/Prefer.
As the result, my both Mail accounts are gone, and instead I have now MobileMe in my Inbox.
How to restore my accounts now please ???
Thanks!!!I have both POP accounts in Library/Mail. What should I do to have both POP in the Mail ?
To drag both to desktop and then to Mail? how and exactly where ?
or to create these two POP again in Mail and then drag both POP folders there ? -
Post Moved Unable to download email attachments
Post moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Unable-to-download-email-attachments/td-p/573621
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’Zooropa wrote:
Hi,
I have just got myself a new PC with Windows 7 (64bits). Using IE 8 (32 bit version), I am unable to download emails attachments from my normal Yahoo account ([email protected]). I have read somewhere that this could be due to the fact that Yahoo uses Norton as antivirus scan for email attachments, and that this could clash with BT NetProtectPlus (McAfee under the bonnet). Is there an option I need to switch off (and if so which one / how) in BT NetProtectPlus in order for me to be able to download attachments via Yahoo mail ?
Please note that this used to work on my previous PC (Windowx XP).
Thanks for your help. This is getting really frustrating !
Hi. Welcome to the forums.
To be honest, there would not really be a clash between the products you've mentioned, because the online system using Norton is a server system and actioned before any download. There is possibly an option in BTNetprotect for "email scanning" or similar. This option can be turned off in the general case, since disk writes are covered anyway,
Have you tried another browser (e.g. Firefox, Opera or Safari) to see if the same conditions exist ?
Is there any particular error message or delay you are seeing ?
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures
Maybe you are looking for
-
Connecting OS 9 To 10.4.9 connection fails during transfer
My beige G3 running 9.2.2 is having a bit of a problem keeping a connection with my Mac Mini running 10.4.2. Here is the detailed description of what happens: On the G3 I open network browser I click on the local network tab then Mac Mini it prompts
-
Write to File Multiple times WTK 2.5.2
Hello All I am trying to write to a file multiple times (in WTK 2.5.2 on Win XP SP2). So I create a FileConnection and create a PrintStream with it. Using the PrintStream I write data to the file multiple times. The problem I am facing is that the wr
-
Edited photo doesn't look like CR2 when imported back to LR 4.4
When I edit photographs in CS6 as initiated from LR 4.4 they look unaccountably different from the original CR2 file when imported back to LR. At first I thought it was a profile mismatch but that isn't the problem. Any thoughts on how to fix it?
-
Populating the custom infotype
Hi Experts, Payworld is an application which is used by employees travelling to Onsite on work permit and by employee who is hired overseas. Please provide me pointers on how the data from this payworld can be populated into respective infotypes
-
Need some direction on downloading and converting
All, I need to download Solaris 10 in a windows environment and convert the disks to a installation set of disks for a sparc ultra 10. Can you point me to documentation or provide me with the set by set to accomplish this. I have been away from it si