Post Moved Drop wire replaced, but old one never...

Post Moved to Phones Board http://community.bt.com/t5/Phones/Drop-wire-replaced-but-old-one-never-removed-Now-it-looks-ready/td...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

You will only be charged for faults proved inside your house, unless you actually damage any of Openreach`s external wiring.
If the old drop wire goes across a road, or could cause injury if it came down, then you can report the problem to Openreach on this website
http://www.openreach.co.uk/orpg/home/contactus/tellussomething/tellussomethingaboutournetwork/tellab...
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Drop wire replaced, but old one never removed. No...

Over a year a go a faulty voice line resulated in the drop wire from the pole to our house being replaced. Actually they rigged a new drop wire but left the old one in place. The engineer claimed that there was an obstalce in our front garden which prevented her from placing a ladder to reach the old one. This "obstacle" was simply a small bush near our fornt door.
Some months later I got the master socket moved and asked the engineer about removing the old drop wire but nothing happened.
Now I can see it is clearly fraying close to the house end, and looks ready to snap. This drop wire must be over 30 years old.
What should I do? I certainly don't want to be charged for anything.

You will only be charged for faults proved inside your house, unless you actually damage any of Openreach`s external wiring.
If the old drop wire goes across a road, or could cause injury if it came down, then you can report the problem to Openreach on this website
http://www.openreach.co.uk/orpg/home/contactus/tellussomething/tellussomethingaboutournetwork/tellab...
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Hi, i have a new number and I'm trying to activate iMessage but i can't. it is only saying waiting for activation, i have tried a lot of times with not success. i'm not sure if i need to replace the old one to this new one, or what do do. can you help

Hi, i have a new number and I'm trying to activate iMessage but i can't. it is only saying waiting for activation, i have tried a lot of times with not success. i'm not sure if i need to replace the old one to this new one, or what do do. can you help

Troubleshooting iMessage activation:
http://support.apple.com/kb/TS4268

How can tell the script I want to save unsaved files but not replace the old one?

Hi everyone
I got this script
var docs = app.documents;
for (var i = docs.length-1; i >= 0; i--) {
    if (docs[i].saved == false) {
        docs[i].save(new File(“~/Desktop/Document.indd”));
        docs[i].close();
    else {
        docs[i].close(SaveOptions.YES);
close and save files
but if I have two or more files, I want to save files like Doc1, Doc2...
the new file will never replace the old one
Can some one tell me how can I do that?
Thanks
Regard
Teetan

Hi,
Change the 4th line like below:
        docs[i].save(new File("~/Desktop/Doc" + (i+1) + ".indd"));
Vandy

Creating a new table, to replace an old one

Hi experts;
I'm looking for an advice about what I'm going to do.
This is the situation;
I got a production table with more than 1,000,000,000 of records.
the queries to this table are too slow, and I decided to create a new table, to replace this one.
But my doubts are:
How can I create a new table including the same structure as the old one, and with some data.
I got this query:
Create new_table as select * from old_table
where trans_year = '2012';
I know with this I got the structure, but what about indexes?
My other doubt is, to replace the old one, just I drop it, and rename the new one?
This table belong to an oracle 9i DB.
Thanks for your comments.
Al

>
How can I create a new table including the same structure as the old one, and with some data.
I got this query:
Create new_table as select * from old_table
where trans_year = '2012';
I know with this I got the structure, but what about indexes?
My other doubt is, to replace the old one, just I drop it, and rename the new one?
This table belong to an oracle 9i DB.
>
You could export the table metadata and then import it as a renamed table. That would keep the indexes, triggers, constraints.
But for one table it may be easier to just recreate the indexes and other objects.
For the query you may want to disable logging of the INSERT.
Create table new_table NOLOGGING as select * from old_table where trans_year = '2012';
-- set the table back to logging mode
ALTER table new_table LOGGING;Then you can drop the old table (if you already have a backup of it) and rename the new one to the old name.
The create will perform much better with NOLOGGING but because it is not logged you will not be able to recover the data from the log files.
So you should take a backup afterward.

How can i start a new user profile service in ordre to replace an old one ?

hi
i create a new user profile service in ordre to replace an old one
when i use : Get-SPServiceApplication i can see that hi is created but
when i use Get-SPServiceInstance i can see it i can see only the old one

Hi,
The Get-SPServiceInstance returns the services instance for a specific server or the entire farm. The service instance GUID is unique to every farm and cannot be changed.
For starting a fresh with the User Profile Service configuration, you can unprovision and re-provision the User Profile Service:
http://sharepoint.stackexchange.com/questions/16146/deleted-service-application-service-instances-remain
http://www.harbar.net/articles/sp2010ups2.aspx#ups14
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

Thank you for your suggestions. I downloaded a more recent version of Twain, but this didn't help. I also tried closing and opening Photo Shop and restarting my computer without success. Reinstalling Photo Shop sounds like a very promising solution, but I'm not sure I will do it. In the meantime I can scan items using a printer program. These scans open in Photo Shop. It is an extra step.

I ran out of space on my time machine because I bought a new I MAC to replace the old one. So I copied the old one on the new one and in addition to that I own a macbook. So what should I do erase the old IMAC on my Time capsule ? Shall I reset it?

I ran out of space on my time machine because I bought a new I MAC to replace the old one. So I copied the old one on the new one and in addition to that I own a macbook. So what should I do erase the old IMAC on my Time capsule ? Shall I reset it?

Go to the airport utility and erase the TC disk.. a quick erase is fine and takes less than 1min usually.
A one pass erase takes several hours depending on how big the hard disk is.. but is somewhat safer in that it tests the drive condition. I normally don't bother for a TM backup.
When you start over you should be able to fit both backups on the TC.. assuming the disk is 2x larger at least than the space used on both the MB and the iMac.
If not you can also add a USB drive to the TC, and use that for one of the computers.
The slowest one is best.. as USB is slow.. but fast enough for wireless you won't notice much.

HT3226 My iphone 4s fell down on the floor and a very very small bit on the edge of my iphone were broken. Can I insert a new iphone body panel with replace the old one

My iphone 4s fell down on the floor and a very very small bit on the edge of my iphone were broken. Can I insert a new iphone body panel with replace the old one.. ???

I think I had it on the iCloud, I just changed computers and had part of my old computer backed up, where are the default iTunes info saved like the pictures and I know my contacts were backed up cuz I kept getting updated stuff that I wasn't sure about, but it was contacts where some belonged to my wife's contacts....but anyway, if the cloud backed up contacts, it should have grabbed pictures too? Like I asked before, if they were backed up to the computer, is there a default iTunes folder they are saved to? I had a crap load of pictures on there that I usually could really access if I was connected to wi-fi. I turned off my data stuff as I only have 4GB and between me and my 2 kids, we seemed to use up a lot of it. My son would play music from Pandora during work, and use up all our data til I limited him to only 3GB, my daughter and I barely used 1GB. Anyway, thanks to everybody that is answering. I thought I might have done good finding the dang sim card, but pointless I guess.
Ralph - F.Y.I. I would be happy to back up the iPhone if I could turn it on LOL......I am pretty positive I did, but what about Text messages? ANY of those saved too or not? Sorry guys, I don't know a **** of a lot about cell phones, but I do know about memory cards, but not sim cards that act like memory cards or look like them anyway. What is the purpose of a sim card if I may ask a stupid question since they don't hold any data from my phone stuff. I just hope my stuff comes back on the new replacement phone once I get it up and running. Again, thanks to everybody for the edumucation.

I recently upgraded to Mac OS 10.8.1. I had an Epson Inkjet printer (Stylus C88 ) that had seen its better days. I repurchased a refurbished model (C88 ) to replace the old one, simple enough. Since I've done this before, I didn't think I had to install

I recently upgraded to Mac OS 10.8.1. I had an Epson Inkjet printer (Stylus C88 ) that had seen its better days. I purchased a refurbished model (C88+ ) to replace the old one, simple enough. Since I've done this before, I didn't think I had to install the CD. I have since discovered the CD isn't recognized on my computer and/or by this Mountain Lion system and that I had to go to Apple to upgrade the new driver for this product, and which I did, but I can't find the epson folder other than the attached. I just want to place an alias printer logo on my desktop but I can't find it anywhere. What to do???

Hi, one question & one suggestion...
What possible things are connected at home but not at the store, inlude every cable, etc.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Reset my apple ID but old one still shows on screen. How can I update my apps now?

I reset my apple ID and password but old one still shows on screen. How can I update my apps now?

Hi jbrunner,
Did you create a new Apple ID, or simply update the old one?
If you simply updated the old one, then you need to go to Settings>iTunes & App Stores, click on the Apple ID, and sign out. Then sign back in with your new ID. Also, you want to go to Settings>iCloud and scroll down to the bottom and delete the iCloud account and sign back onto it with your new Apple ID as well.
If you created a new Apple ID, then there are other considerations. Post back if that is the case.
Cheers,
GB

How do I remove my personal text msgs from appearing on my new iPad. Rec for Christmas didn't realize texts appeared on iPad, changed settings, new ones didn't appear but old ones still on it.

New iPad showing my iPhone texts, changed settings new texts stopped but old ones still appear on iPad . It is a family iPad and don't want kids to see text from adults even g rated, glad they didn't see Christmas texts with present pictures and questions from relatives.

As far as I know, deleting the messages on the iPad should not affect them on the iPad. I delete messages on one device and it doesn't affect the messages on the other device since they are stored locally on the device. And ... I am using my iPhone number as the contact address on both devices,
You can create another ID for texting on the iPad, but it's not an absolute must. You just need to use your Apple ID email address, or any other working email address for that matter - as the contact at address on the iPad for texting. As long as you use the iPhone number on the phone and the email address on the iPad, texting paths shall never cross.
this should be of some help.
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

HT1386 I am setting up my daughter's 4th generation iTouch to replace her old one. Our family shares an iTunes account because my daughters are young. Does she have to have her own iTunes account in order to use FaceTime? Please advise best route at set u

I am setting up my daughter's 4th generation iTouch to replace her old one. Our family shares an iTunes account because my daughters are young. Does she have to have her own iTunes account in order to use FaceTime? Please advise best route at set up.

She would need her own Apple ID, though not an iTunes Store account per se. This article will probably be of help:
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-facetim e-set-up-use-and-troubleshooting-problems/
Regards.

Have changed Apple ID this morning but old one still showing on Apple store. How do I change it?

Have changed apple ID this morning but old one still showing on apple store
how do I change it

the appleID is the connection between the device and icloud and what apps and media itunes store see that you own
if you change appleID you start from scratch
settings->store->appleID is where you remove what appleID your ios device see as yours

Bought my daughter ipod touch 4th gen to replace her old one and want to get it ready for xmas by transferring her old content to new - how do i do it? secondly, if the old ipod is sold will the purchaser have access to account details?

Bought my Daughter new ipod touch 4th gen to replace her old one and i want to get it ready for christmas by transferring everything (games, music etc) - how do i do this?
Also, if she sells her old one, would the new owner have access to account/bank details?

You can transfer iTunes purchases from the old iPod to your computer then sync the new iPod.
Connect the old iPod, launch iTunes. From the menu bar click File > Transfer Purchases From
Now connect the new iPod and sync Apps, Music, etc.
As for selling the old one tap Settings > General > Reset > Erase All Content and Settings
That will erase all personal data from the iPod.

Post Moved Drop wire replaced, but old one never...

Similar Messages

Maybe you are looking for