Post Moved error code 0x800ccc0f

Post Moved to other BB Queries http://community.bt.com/t5/Other-BB-Queries/error-code-0x800ccc0f/td-p/521635
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

alones wrote:
It is not timeout settings, or firewall, or connectiosn speed. It is a problem with Yahoo.
BT have been tring to fix it for about 2 months now...
Yes there is probably a problem with the Yahoo servers prematurely timing out. But the originator of the thread was looking for some advice on alleviating their problem. The size of the email, timeout settings, firewall, virus scanning and connection speed all potentially have a bearing on the issue. So the advice given is valid but depending on circumstances may be more or less effective.

Similar Messages

Reply to post by NigelE headed - Error codes 60xx ...

Quote - '
Error codes 60xx (6025, 6030 and others) on the BT Sport website video player
on ‎03-08-2013 17h36
Hi all
We’re seeing a lot of posts about error codes displayed when trying to watch live content on the BT Sport online player.
The video player on the BT Sport website requires a Microsoft Silverlight plug-in because we use Microsoft PlayReady DRM to protect video content from piracy. If you receive an error code on the website video player that does not begin with the letters 'VC' (eg. 6025, 6030), this means Silverlight is not working with your computer. This may be for a number of reasons, such as the specification of your machine or the version of the browser that you are using. It is possible to download the latest version of Microsoft Silverlight from here:
This site also offers guidance on system requirements and support for getting Silverlight working on your computer.
Thanks
Nigel ' unquote.
The above is only partially correct. I and hundreds of others have all the correct equipment and software which works perfectly on the above MS site but refuses to work on the BT Sport page.
A quick check on Google would show Nigel and his cohorts that the fault lies fully with the BT server side and the inability to manipulate the licences.
As for protecting from piracy, your naivety is beyond belief. I do not wish to pirate any thing and I am no expert but even I know that anything that plays on my PC screen can be recorded no matter what BT does.

Quote - '
Error codes 60xx (6025, 6030 and others) on the BT Sport website video player
on ‎03-08-2013 17h36
Hi all
We’re seeing a lot of posts about error codes displayed when trying to watch live content on the BT Sport online player.
The video player on the BT Sport website requires a Microsoft Silverlight plug-in because we use Microsoft PlayReady DRM to protect video content from piracy. If you receive an error code on the website video player that does not begin with the letters 'VC' (eg. 6025, 6030), this means Silverlight is not working with your computer. This may be for a number of reasons, such as the specification of your machine or the version of the browser that you are using. It is possible to download the latest version of Microsoft Silverlight from here:
This site also offers guidance on system requirements and support for getting Silverlight working on your computer.
Thanks
Nigel ' unquote.
The above is only partially correct. I and hundreds of others have all the correct equipment and software which works perfectly on the above MS site but refuses to work on the BT Sport page.
A quick check on Google would show Nigel and his cohorts that the fault lies fully with the BT server side and the inability to manipulate the licences.
As for protecting from piracy, your naivety is beyond belief. I do not wish to pirate any thing and I am no expert but even I know that anything that plays on my PC screen can be recorded no matter what BT does.

CS5 telling me to update, but updates won't install (no error code given)

I have been trying to install the updates my CS5 has been telling me to do but every time I run the update program, it goes through the process and then says there was an error in updating all my programs. I have restarted my computer, I have shut everything down...I have done EVERYTHING possible. At this point in time, my company (which is a not-for-profit) cannot afford to upgrade my software to the CS6 cloud based system, therefore I need to be able to upgrade the software I am on currently to continue doing the work I need to do.
Additionally, there is no error code given when the updates finish, so I can't even look up the error code or post the error code here to help narrow down the issue.
PLEASE HELP!!!!
Thank you so much
Audra

Hi Audra,
Please try downloading and installing the updates manually from : http://www.adobe.com/downloads/updates.html
In case you still face issues, please try the following :
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave

HT201413 I am receiving the error code (-50). The original itune songs etc were installed on a win 7 32 bit system and I have now moved to a win 7 64 bit system. Is this why I get the error code? I can access the itunes store to view my account. Any ideas

I am receiving the error code (-50) when trying to access the itunes store. The original itune songs etc were installed on a win 7 32 bit system and I have now moved to a win 7 64 bit system (same PC) and have copied the folder across. Has the switch from 32 to 64 bit caused the problem? Is this why I get the error code? I can, however, access the itunes store to view my account. Any ideas please?

Hello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Getting Error Code as -5002 while posting A/R Invoice as Draft using C#

In the following code we are getting an error while posting the invoice as an draft. Can any one help ?
            com.Server = ConfigurationManager.AppSettings["Server"];
            com.CompanyDB = ConfigurationManager.AppSettings["CompanyDB"];
            com.DbUserName = ConfigurationManager.AppSettings["DBUsername"];
            com.DbPassword = ConfigurationManager.AppSettings["DBPassword"];
            com.UserName = ConfigurationManager.AppSettings["Username"];
            com.Password = ConfigurationManager.AppSettings["Password"];
            com.UseTrusted = true;
          long RetCode = com.Connect();
            Documents sapDoc;
            sapDoc = (SAPbobsCOM.Documents)(com.GetBusinessObject(BoObjectTypes.oDrafts ));
            sapDoc.DocObjectCode = BoObjectTypes.oInvoices;
            sapDoc.DocDueDate = dDueDate.Value;
            sapDoc.CardCode = txtCustomerCode.Text.Trim();
            sapDoc.HandWritten = BoYesNoEnum.tNO;
            sapDoc.DocTotal = Convert.ToDouble(txtTotalbeforeDiscount.Text.Trim());
            for (int i = 0; i < dgInvoice.Rows.Count - 1; i++)
                //sapDoc.Lines.LineNum = i;
                sapDoc.Lines.ItemCode = dgInvoice.Rows<i>.Cells[1].Value.ToString().Trim();
                sapDoc.Lines.Quantity = Convert.ToDouble(dgInvoice.Rows<i>.Cells[2].Value.ToString().Trim());
                sapDoc.Lines.Expenses.ExpenseCode = 4;
                sapDoc.Expenses.LineTotal = sapDoc.Lines.Quantity * 1500;
                sapDoc.Lines.Add();
                MessageBox.Show(sapDoc.Lines.LineNum.ToString ());
            long j = sapDoc.Add();
            if (j == 0)
                MessageBox.Show("Added to SAP Business One as Draft!");
I'm getting an error code as -5002 and its not getting stored as an draft. This was done based on SDK Example given in the help document. Can any body throw light on the same.
Edited by: Sadanand Manda on Nov 24, 2008 11:45 AM
Edited by: Sadanand Manda on Nov 24, 2008 11:46 AM

SAP Note Number: 1179405
Error -5002 when trying to copy a document with Sales BOM
In order to create the delivery via the DI, you need to set the oDoc.Lines.BaseLine value to the LineNum value from the RDR1 table (in the above example you should enter the value 2).
we set oDoc.Lines.BaseLine=0 before starting the lines loop. This has resolved the issue.
This note was really helpful and it was found in another query.
You can also refer to this. https://forums.sdn.sap.com/click.jspa?searchID=19070513&messageID=6178079
Thanks.
Edited by: Sadanand Manda on Nov 24, 2008 12:16 PM

"Error Code -50" when moving macbook pro?

Hello!
I'm having an issue that I can't exactly find anywhere else. Starting in August or so, my hard drive started having issues with error code -50, almost always when I moved the computer suddenly (setting it on a table, standing up with it too quickly, etc) or not-excessively-gently, although occasionally it happens without any movement. The computer still functions fundamentally "normally," but I can't use the internet (probably because the cache can't be accessed) and I can't open or save files. The issue corrects itself when I restart the computer, and probably repeats itself a few times a week.
It didn't start happening until I replaced my 320gb hard drive with a 500gb one and upgraded my 4gb RAM to 8gb at the same time. Thinking it was the hard drive, I took it back out and replaced my original hard drive, but the problem persisted. I did not try replacing the new RAM back with the original, but could bad RAM even contribute to the problem?
Thank you!

CLICKY CLICK----> Negative Value Error Codes
Disconnect all devices from the computer then do the following:
Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
Mac OS X (10.6.1)
Use Software Update or the OS 10.6.8 combo update to update your OS. Also, update everything SU has to offer for your computer. When done, repair permissions and restart your computer.

Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?

Like the topic - "Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?"
I installed this OS, and it looks nice, but it's terrible to use. I randomly have the volume controls get disabled, and sometimes the volume menu in the system tray does nothing when adjusted which I've never seen in an OS before. The trash won't empty. When I try to drag and drop newer files over existing ones, nothing happens. The old ones just stay there. I have to delete the old ones and then move the new ones. And when I go into the protected files to manage audio plugins (I make music), the first thing I hit are error codes galore, and password prompts that either don't popup when they should, or don't execute the command after I provide my password.
What can I do now that I installed the flames of **** onto my computer?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Error code -8065 when moving Quicken 2007

Hey everyone
I recently bought Quicken 2007 (because I got tired of having to switch to Windows every time I wanted to use it) and am very happy with the purchase, contrary to many of the reviews I read on Apple.com
The only problem (inconvenience, rather) is that Quicken 2007 is in it's own folder (/Applications/Quicken 2007) . It contains the program package, the ReadMe, the license file, etc. However, I want to move just the program to /Applications. Every time I try, I get this error message:
+"Sorry, the operation could not be completed because an unexpected error occurred. (Error code -8065)"+
Does anyone know how to get around this? Or at least what the error code means? I searched Apple's online support and did not find info on the error code.
Thanks.

I had already looked at Google and did not find anything. I got Quicken moved by changing the folder name to Q2007 and then moving the app to the Applications folder. Thanks!
As to why I wanted to do this: I didn't want it in my dock, but I didn't want to have to open up a new finder window every time I wanted to use the app.
Thanks again.

Posting of Payments - Error code 4006

Hi all,
Does anybody know what means error code "-4006" returned when posting payment document using SDK?
Thanks
Tomas

Hi Thomas,
You can get the corresponding error description by code:
oCompany.GetLastErrorDescription
Code example:
if oPayment.Add() <> 0 then
MessageBox.Show(oCompany.GetLastErrorDescription)
end if
Hope it helps,
Adele

Moving files error code -1309

I am moving files off my desktop and onto an external drive and i keep getting an error code -1309. it happens randomly on some files and not others? any one know what this means and how I can get my files moved?
iMac G4
Mac OS 10.4.11
Quicktime 7.5.5

A drive or partition which is in the FAT32 format simply cannot accomodate files which are 4GB or larger regardless of how much space there is available on the drive.
(37494)

What is error code "post/16/2048 DIMM0/J22"?

What is error code "post/16/2048 DIMM0/J22"?
I'm thinking that may be why my startup sound isn't working
Thanks,
Mittens131
Using An iMac G4 (Flat Screen)

If you open up the machine and look, I suspect you will see that the slot is NOT empty. It is failing the power on self test, so the machine is not using it.
You can try opening the cover and then removing and reseating the memory. This might work, but probably not.
Other world computing is an excellent source for RAM and other mac upgrades.
http://macsales.com
I recommend looking over there, and adding some more memory is always a good idea IMO.
Good Luck,
Marty

Error code 36 when moving big files

getting error code 36 when moving big files from my mbp (10.6.8) to my external hard drive. have tried using the sudo command in terminal, but it doesnt work. what do i do?

sorry about that
I'm moving movie files around 800mb++ to HFS+ and NTFS formatted drives. no problems when using the NTFS drives with other computers but i cant really test the HFS drive on another computer since im the only one with a mac.
I've tried:
sudo cp /source/folder /destination/folder
but to no avail.

What is error code post/16/2112

Hi, I have just run the Apple hardware check disc as I am having some problems with my G4 DA.
It reported a bad RAM stick (Kingston VRAM 512mb) so I removed it and the problem seems to have gone away, I ran Hardware disc again a couple of times to check everything and it comes back with the error code post/16/2112.... what does this mean?
Also, any thoughts why the RAM may have failed in the first place?
Thanks....

Thanks Thomas, I only have the keyboard and mouse and screen attatched at the moment, it has a USB2 expansion card and a 933mhz processor, other than that it is pretty much standard old G4... Could it be the Graphics card... I have been having trouble with my apple studio display, the card is a Rage Pro 128 with the ADC connector... any thoughts?
Thanks again...

Error code moving folder

An error cod moving a folder from one folder to another on the latest

Well, you'd have to delete the Movies folder before you could replace it, and deleting the Movies folder would also delete its contents, thereby making the replacement impossible. It's not really surprising that the Finder was confused.
Simple solution: rename the parent folder.

Error Code Post/0/2048 DIMM3/J14

I'm trying to fingure out what this error code means when I ran the hardware test the message came us error code "Post/0/2048 DIMM3/J14
It indiacted I may have to reformat the media? I have also lost the CD needed to reformat. Anyone konow what the error code is and where I can get another CD?
Thanks
Tom

It would appear that you have a problem with one of your ram chips. Try changing the chips and run the test again. See HERE. This is the Aluminum Powerbook forum are and you might get more expert help on your G5 Dual over in that forum area. Never, never lose your OS installer CD/DVD. That should be in the vault. You may try to contact AppleCare to see if they can help you get another one.

Post Moved error code 0x800ccc0f

Similar Messages

Maybe you are looking for