Post Moved Fibre-Cab-install-steps

Moved http://community.bt.com/t5/BT-Infinity/Fibre-Cab-install-steps/td-p/279419
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Hi AntFarr,
The OP hasn't been back on this forum for almost a year and a half.
Cheers
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Similar Messages

Fibre Cab install steps.

Ok bear with me.
Houses are usually connected by copper lines, sometimes overhead or underground or a mixture of both, back to street cabinets and then, with the other lines from the street cab all the way back to the exchange. (Yes/no/not always)
Openreach then roll out new equipment in the guise of Fibre enable street cabs, these are cabled up and powered. The link to the main exchange is by fibre. This acts as making the Cabinet VITRUALLY next to the exchange therefore cutting out the distance that the cab is from the exchange. (Yes/no/not as simple as that)
BT Retail (in my case) then put an order to Openreach to move my line onto the new cab. (Yes/no/not without an order)
Any (cough) users with experience of this please feel free to put me in the picture so I can decide what to do.
Solved!
Go to Solution.

Hi AntFarr,
The OP hasn't been back on this forum for almost a year and a half.
Cheers
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Post Moved Infinity-New-install-today

Post moved to Inifinity Board http://community.bt.com/t5/BT-Infinity/Infinity-New-install-today/td-p/682502
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Contact the mods or speak to BT, only in extreme cases they will deal within the first 10 days but to me it's very clear something is wrong with your line.
If this helped you please click the Star beside my name.
If this answered your question please click "Mark as Accepted Solution" below.

Post Moved Can't install McAfee Security Softwa...

Post moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Can-t-install-McAfee-Security-Software/td-p/577841
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Maybe something nasty is on the pc preventing installation. Pop ms essentials on for a while. Do a full scan and run malware, spybot etc.
I had exactly this issue and in the end wiped everything and reinstalled windows.
Tedious. But it solved it.
AQ.
"Welcome to Royston Vasey - You'll never leave."

PI 7.11 sp5 post install steps - SLD update hangs in IE browser

Hello gurus,
This is my first shot at installing PI ever. We decided to go with PI 7.1 EHP1 and SP5. I think the latest may be SP6.
At any rate, we're doing this on AIX 6.1 and Oracle 10.2.0.4.
I followed the install Guide exactly. Did the sapinst, oracle and patch. Next, I manually updated the KERNEL, IGS , JVM, Then I updated SPAM, SAP_BASIS, then all the other abap components. Then did JSPM and all those components. Everything matches SP5 for PI 7.11
https://websmp204.sap-ag.de/maintenanceNWPI71
SAP_ABA     711     0005     SAPKA71105
SAP_BASIS     711     0005     SAPKB71105
PI_BASIS     711     0005     SAPK-71105INPIBASIS
ST-PI     2008_1_710     0003     SAPKITLRE3
SAP_BW     711     0005     SAPKW71105
ST-A/PI     01M_BCO710     0001     SAPKITAB8F
Now I'm doing the post install steps that are in the instguide. THere are tons of steps, but let me go over the big ones and where I'm having a problem:
READ ALL THESE NOTES:
Note 1309239 - Configuration Wizard: PI NetWeaver initial setup
Note 1286149 - Configuration Wizard: PI Self Test for NetWeaver
Note 1107808 - Collective Note: Configuration Wizard 7.1
Note 1286428 - Configuration Wizard: PI Wizard Templates overview
Note 1115280 - PI CTC: Running SAP NW for PI in a different client
At this point, based on being at PI 7.11 and SP5, I did the client copy. from 000 SAP_UCUS to my new 400 client. Then I did 001 SAP_USER to my new 400 client.
Then I followed the steps to link the java UME from 001 to 400. No problem after restarted SAP, it goes to 400.
Now, the next step as I see it is to run the initial config wizard out of NWA. I did that, no errors.
My problem is when I get to updating the SLD. I started at cimsap 1.5.42 and CRDelta 5.0....
I updated cimsap to the cimsap51509_1-20005942.zip which took me to 1.6.9
Next, I tried to import CRDelta51509_1-20005942.ZIP. I "browse" to find it during the import, but when I click the "IMPORT" button, my browser hangs...
I don't even get to the next page where it would be one more "warning/info" before I could really start the import.
I didn't find anything in the work directory or the cluster/server0/log directory.
I search all through SDN/OSS but could not find anyone who had this problem.
Where did I mess up? Are there other config wizards I should have run before I tried to update the SLD?
--NICK

Hey Caio,
Thanks for the response but it doesn't actually answer my question. But to that point, for a "basic" PI post install, which of the NWA config tasks would you run other than the "initial config" ? And would you run them BEFORE you updated the SLD content (cimsap/CRDelta) ?
NW: PI - AS ABAP (Basic Configuration for Idoc, Proxy): Maintain
PI Adapter Engine in JPR Mode
PI Demo Client
PI Full Qualified Host Name
PI Self Test for NetWeaver
PI SLD Self Registration
Specifically, I did the SAPINST - ABAP/JAVA patches - Client copy - and THEN the initial config wizard (Setup a new local SLD, ). Also, during the initial config, I clicked the box marked "This SLD will be used as a name server for development" and my PI server hostname was already in the box marked "object server name". This config took about 30 minutes. I didn't see any errors or warnings. although I didn't view the log. I did go into Java JEE services and Filter for Services with name "XPI". All were green.
THEN I tried to update the SLD content.
any thoughts appreciated.
NICK

ABAP & Java Preview install done. Need Post install steps for XI.

Hi
Please excuse for the most basic question.
From the trial downloads, I've installed the
ABAP and Java and would like to know the
post-install steps for activating and configuring
the Exchange Infrastructure component and
subsequent configuration
I've installed on the local host along with the
Microsoft Loopback Adapter. What should be
the connection parameters for the Visual
Administrator?
Any help is appreciated. Thank U.
Rajendra.

Hi Rajender
I think no question is difficult or basic .The severity depends on whether you know it or not,in other terms your comfort level.
Coming back to your post:Go through the below link
https://websmp103.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Re: XI INSTALLATION and POSTINSTALLATION
If you need the XI configuration guide then visit:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
Any issues feel free to ask
Reward with suitable points:

Post Install Steps & Initial Configuration

Hi,
I want to confgure system monitoring on solution manager ehp1 Please tell Post Install Steps , Initial Configuration. to proceed
Thanks,
Shashi

The transaction Solman_setup is not available before sp18.....it is available in EHP1 or SP18 onwards
Hope it clarifies ur doubt
Regards
Prakhar

Post Install Steps for EP7.0

Hello Guru's.
I am looking for a listing of needed Post Install Steps for EP7.0. I have the installation guide for NW2004's SR1 ABAP+JAVA on AIX: Oracle and the NW2004s Master Guide. Is there any thing else I should have? I am not doing the actual install, just the post steps.
Thanks,
Chris

Hi,
Start with this: http://help.sap.com/saphelp_nw2004s/helpdata/en/a9/76bd3b57743b09e10000000a11402f/frameset.htm
Marc.

Post install steps for 11i on XP

Please advise on post install steps after 11i installtion on XP based OS/
ALso what are the steps/services to be completed before trying to login into Apps
Thx much

as such nothing is required as a POST INSTALL on XP and not even a "Restart" sounds strange but this is how simple it is to install on Windows.
anyways... there r two ways to log on to Apps.. one is as mentioned by using the http://........ stuff where u use /pls/ to run the apps. Sometimes (more often) it doesn;t work well wtih XP and therefore the alternative is to runt he servlet instead.
this is how it is:
http://host.domain.com:8002/dev60cgi/ifcgi60
I am considring that u didn;t change the default port assignments. the above shud prompt u to download n install "jinitiator" which is Oracle's JVM (required). Install it and u shud be able to see the logon screen.
Use "sysadmin/sysadmin" or "operations/welcome" as deafult "username/password" combination.
HTH.
Rajeev.

Mdm post install steps

hi gurus
can any body explain me the mdm post install steps.
in my laptop i have installed
1) mdm server 2) mdm import server 3) mdm syndication server 4) database(oracle)
5) mdm console 6) mdm data manager 7 ) mdm import manager 8 ) mdm syndication manager
but after installing all these components when i open mdm console nowhere i can proceed , are there any specific steps to be followed , please explai me
akhil

Hi Akhil
U said that u installed MDM in ur laptop
After that u have to Mount the MDM server.
Click on MDM Console u will see MDM server in the screen.Just right click on tht And Click On Mount MDM Server.
After that u will get Small Window In that seclect ur MDM Server After that Press OK.
U will get Ur Server Under the SAP MDM Server With Red Colour( stop )
Right click on that and select start MDM Server.
Now ur server Is mounted. After that u have to create / UnArchive ur repository under that ok.
U had any repository with u . If not go to SAP Marketplace In that u will Get SAP Defined Repositries.
Hello Can u tell me that which version U installed in ur Laptop.
If u need any further help please let me know
Regards
Hari

ECC6.0 Post-instalation steps..

Hi
Any one can provide the post instalation steps in IBM Aix server/UDB DB2(8.x/9.x) environment...It's very helpful for me the current project..
ECC'6.0 - Post Instalation Steps.
NW'2004s(EP,BW,Xi) - Post Instalation steps.
SRM'5.5 - Post Instalation Steps.
My ID: [email protected]
Thanks for your help.
seshu.

Hi,
U can get post installation steps in upgrade manual itself. It is no specific think for AIX.
Thanks

EP Post instalation STep

Hi Friends i installed EP 6.0 . now i want konw whta are Post instalation step to do either admin and Development on it . plz can any one give details , i am ep Developer .
Thnaks In advance
Kumar

Hi Kumar,
As you have said that you have installed EP 6.0. Now we need to proceed with integration as per your project requiremnets. We can implement ESS ,MSS or else configure SSO to BW or R/3 systems.
Please chk teh below link.this might help you in knowing more post installation steps..
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/fe79d690-0201-0010-f3be-825bcc262a09
Hope this wil be useful.
Regards,
Shaila

Post moved BT giving me run around pics included

Post moved to Infinity board http://community.bt.com/t5/BT-Infinity/BT-giving-me-run-around-pics-included/td-p/552425
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

ThatDamnGeordie wrote:
yup thats what people say but...... fibre is only in a small part of our town (where i live) and with cabs soo close it wouldnt make sense to have it connected elsewhere ( i can see the telegraph pole carrying the cables to my closest cab )
and yup ive tried those, thanks anyways.
Strange your exchange is less than a mile away. If you enter your landline number into here, What speeds does it estimate for ADSL2+?
Do you share your line with anyone one else?
Your noise margin is slightly higher than the 6db target. Have you tried a quite line test (dial 17070 option 2 from landline) no noise on corded phone but slight dim hum normal on cordless.
I see your hub has a connection time of 2days, have you manually reset it or has it just automatically resynced?
Hopefully when you order BT Infinity they send out an engineer who will install the equipment and give you a new BT Infinity master socket.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Post Moved How accurate is the BT infinity check...

Post moved to Infinity board http://community.bt.com/t5/BT-Infinity/How-accurate-is-the-BT-infinity-checker/td-p/549221
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I can see exactly what your saying & in no way disagree.
I do think however the wording of the current BT television advertising campaign for Infinity requires modifying as these so called 'personalised estimates' gave me a completely different perception of a speed estimate.
When I received my personalised estimate of 80/20 sadly I actually believed this, maybe becuase I live very close to my FTTC cab, & was a little dissapointed after the installation to see I hadn't got what I was told by BT as a result of my 'personalised estimate'.
Im still happy with my download/upload speeds but am very dissapointed with ping/latency tests conducted through BT's fibre network.
Perhaps the words 'UpTo' should make a return to BT's advertising campaign.

Post Moved New-to-BT-Infinity-only-just-works-an...

Post Moved toInfinity Board http://community.bt.com/t5/BT-Infinity/New-to-BT-Infinity-only-just-works-and-only-1Mbps/td-p/866208
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

They installed a new master socket etc when they put the modem in. There is no phone plugged into the master but there are 3 phones AFTER the master socket (extension terminals inside socket, after filter I guess) . I think they tried it with all those disconnected. As for the signal, I mean the DSL light takes ages to actually come on and sync. I don't use wireless here. I have a long Cat5e cable from modem to bt hub then 2 computers and a CCTV box coming off the hub via LAN.
Property is a farmhouse on unmade track with no other properties nearby served by the phone wires. We are approx 1000m from the main road. I think if they could connect the wires into the cabinet at and of my track they might get the claimed speeds. I did a test using a known phone number of a house near that cabinet and it came back as 64mbps quoted , so theres obviously fibre in that cabinet.
One more thing, there is currently broadband on another line in the same cable coming up my track, which is on my business line, I have kept this running but when infinity working better it can be cut off. I wonder if there could be any interference from one pair of wires to the other having 2 broadband signals travelleing 1000m together. Probably not but just trying to think of everything.

Post Moved Fibre-Cab-install-steps

Similar Messages

Maybe you are looking for