Post Moved Speeds from P2p/Torrents

Post moved to the infinity board http://community.bt.com/t5/BT-Infinity/Speeds-from​-P2p-Torrents/td-p/563527
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

you would be better reading the post on the infinity forum - just use the search facility as there are numerous posts
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

  • Post Moved Router not up to speed

    Post moved to Infinity Board http://community.bt.com/t5/BT-Infinity/Router-not-upto-speed/td-p/522691
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    How old is your Airport? It's not uncommon for a router to die after 5 years or so.
    This article should help with resetting it: http://support.apple.com/kb/HT3728?viewlocale=en_US
    ~Lyssa

  • Post Moved Infinity-speed

    Post moved to infinity http://community.bt.com/t5/BT-Infinity/Infinity-speed/td-p/666668
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    I was going to put it in the Infinity forum but as there were other similarish ones here, and that my problem is reagrding a connection issue (my modem gets Inifinity just fine), I thought thought the connection issues forum would be the correct place.
    Also as HH3 is not Infinity specific, I thought the problem was not necessarily Inifinity specific either
    Even so, thanks for putting in the correct place.

  • Post Moved Slow-wireless-speeds

    Post Moved to infinity board http://community.bt.com/t5/BT-Infinity/Slow-wirele​ss-speeds/td-p/686652
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    no the infinity board is the correct place for your problem the normal tests carried out for broadband speed problems do not work with Infinity there are posters there that can help you on the infinity board
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Post Moved Download-speed-has-remained-at-3-5Mb-b...

    Post moved to Infinity Board  http://community.bt.com/t5/BT-Infinity/Download-speed-has-remained-at-3-5Mb-but-should-be-11Mb/td-p/...
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    I have a master socket with OPENREACH printed on it and a white modem? with Openreach BT on top and Echolife on underneath then a black HomeHub 3.0   I can access the homehub settings but there is no ADSl information displayed other than:
    WAN Status
    Connection Information
    Line state:
    Connected
    Connection time:
    2 days, 02:16:49
    When I did speedtest I got the following result:
    FAQ
    1. Best Effort Test:  -provides background information.
    Download Speed
    3.39 Mbps
    0 Mbps
    3.51 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 3.39 Mbps
     For your connection, the acceptable range of speedsis 2.45 Mbps-3.51 Mbps .
     Additional Information:
     IP Profile for your line is - 3.51 Mbps
    2. Upstream Test:  -provides background information.
    Upload Speed
    0.51 Mbps
    0 Mbps
    2 Mbps
    Max Achievable Speed
    Upload speed achieved during the test was - 0.51Mbps
     Additional Information:
     Upstream Rate IP profile on your line is - 2 Mbps
    We were unable to identify any performance problem with your service at this time.
    It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
    If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.

  • Apple not moving from u torrent

    Hi
    I am having problems not being able to access applications on my MacBook Air 2011 (OSX 10.6) since my children tried to download a movie from mu torrent.
    I have tried many measure but am unable to get my original desk top display back.
    Any help would be appreciated

    Everytime I switch on the Mac Air Book I get the mu torrent downloading the movies. There are no other icons on display on the Desktop. I am able to access the internet if I click on the Apple Logo and then go to Recent Items and cick on Firefox. However I am not able to access Applications. I cant see any other icons and am not able Trash any items. The downloading starts automatically, everytime I start the computer even if I have already tried to stop and remove the downloads from mu torrent.
    Basically I am stuck with the mu torrent download and cant access Skype etc.
    Should I just leave it on and see what happens?
    I have looked at various forums and am breaking my head trying to resolve this.
    Pease Help!!

  • Post Moved Can't use Openzone or FON. But I could...

    Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Can-t-​use-Openzone-or-FON-But-I-could-yesterday/td-p/547​...
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    I had an online chat with a BT Broadband help person, who said she wasn't trained on Openzone and gave me a number to call, where I got a recorded message saying that the BT wi-fi network had "issues". A few hours later the problems disappeared and today everything's fine. So who knows. 
    Regarding Ts and Cs, if Openzone is bundled with your Total Broadband package there's no volume or time limit, you just have to log in every 30 mins if you go over 10,000 minutes in any given month.  Large files are positively encouraged: "Is there a download limit? No. Wireless broadband is perfect for uploading or downloading large files at high speed. Usage is based on time rather than data transfer amount." From https://www.btopenzone.com/help/common-questions/index.jsp#using_8  I'm downloading 50GB+ files via P2P. But perhaps the BT network sees them as lots of small files, as P2P works by chopping them into little bits. 
    The Openzone Fair Use policy only applies if you buy an Openzone subscription separately. In which case P2P, large files and a 3GB+ monthly volume are "inappropriate". http://www.btopenzone.com/terms-and-conditions/fair-usage-policy.jsp
    DS, what did you mean by clearing the connection history? Sounds interesting. Do you mean removing the profile from the Manage Wireless Networks screen? 

  • Re: Drop in speed from 17Mbps to 5Mbps ...

    I'm responsible for 3 separate BT broadband accounts at three different addresses in 3 parts of the country. I've recently "upgraded" all 3 routers to BT HomeHub4. Subsquently, there has been a dramatic FALL in download speeds at all 3 locations.  Can't be a coincidence!
    The falls have been from 14 to 7; from 11 to 7; and from 6 to 4.
    Are the new HomeHubs faulty, or is BT throttling them - perhaps to push us into ordering Infinity?
    Unless things improve, I shall have to consider switching supplier, after a lifetime with BT.
    All suggestions welcome.

    the probability of all 3 hubs being faulty is extrememly remote and BT do not throttle the conenctions apart from p2p and then only on contracts prior to feb 2013
    the bt customers would need to post stats for assistance from forum members  only bt employees on forum are the mods and your posts do not go to bt
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Post moved BT giving me run around pics included

    Post moved to Infinity board  http://community.bt.com/t5/BT-Infinity/BT-giving-me-run-around-pics-included/td-p/552425
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    ThatDamnGeordie wrote:
    yup thats what people say but...... fibre is only in a small part of our town (where i live) and with cabs soo close it wouldnt make sense to have it connected elsewhere ( i can see the telegraph pole carrying the cables to my closest cab )
    and yup ive tried those, thanks anyways.
    Strange your exchange is less than a mile away. If you enter your landline number into here, What speeds does it estimate for ADSL2+?
    Do you share your line with anyone one else?
    Your noise margin is slightly higher than the 6db target. Have you tried a quite line test (dial 17070 option 2 from landline) no noise on corded phone but slight dim hum normal on cordless.
    I see your hub has a connection time of 2days, have you manually reset it or has it just automatically resynced?
    Hopefully when you order BT Infinity they send out an engineer who will install the equipment and give you a new BT Infinity master socket. 
    jac_95 | BT.com Help Site | BT Service Status
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Try a Search
    See if someone in the community had the same problem and how they got it resolved.

  • Moving Down from the Red Epic

    Moving down from the Red Epic (65K) full kit to the Scarlet (to the Panasonic?) on down to the $4500 range, what are the best camcorders available in a progressive downward price range.  Four or five models you think are a great value.
    I personally like the older Panasonic cameras except for the scatterbrained format and in some models the faux 1920 x 1080 resolution.  Suggestions welcome for other brands.
    Thanks

    Chuck, merry xmas.. I made this video for you and your better half just now...
    Earlier today I went to store during beginning of snow storm ( before it got too bad to go anywhere in my old car ). I did some whacky driving in very slippery conditions ( rear end fishtailing a few times to keep my speed up and not get stuck and balancing that with being somewhat "safe" on the road ).
    I did get stuck on the hill leading to my parking lot and had to do some backward and forward gentle moving to finally get unstuck and get into my spot... which is now my spot for the next 2 days probably... so I bought plenty of beers when I was out. Go Vikings! Go Giants !
    This page ( a secret link ).. was hard to do cause I haven't done it in like 7 months or so..the video on my own server junk.
    Basically I had to export the video from 1920x1080 to 720x405 as FLV from my mousey computer and CS3 ( I'm using mov 264 source to cineform avi in cs3 ). If I wanted to have higher res for faster bandwidths I'd have to put links on the webpage to those other options more or less... and to be honest, nothing is fast enough to do full HD without buffering a lot first... so I don't know if it's worth it. My personal feeling is that it's not worth it. Too many people would have to stop the video, wait for the buffer, and then restart.. and in the end the only decent play would be the 2nd one...after you already have it downloaded.
    Anyway, this is my cougar sled which is now parked after an exciting ride to stores... and now it's YOUR turn to post something from your new camera that has me drooling. This camera is the olympus TG1 cheapo thing that is real good for bad weather and shooting " visual reminders " of stuff... like when you go scouting for locations etc..use this thing..is very good for that. Can take into rain, snow, drop it on ground, it doesn't mind...even underwater !
    http://rodneybauer.com/whiteboard7.htm
    happy holidays you guys !

  • Post Moved New-to-BT-Infinity-only-just-works-an...

    Post Moved toInfinity Board http://community.bt.com/t5/BT-Infinity/New-to-BT-Infinity-only-just-works-and-only-1Mbps/td-p/866208
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    They installed a new master socket etc when they put the modem in. There is no phone plugged into the master but there are 3 phones AFTER the master socket (extension terminals inside socket, after filter I guess) . I think they tried it with all those disconnected. As for the signal, I mean the DSL light takes ages to actually come on and sync. I don't use wireless here. I have a long Cat5e cable from modem to bt hub then 2 computers and a CCTV box coming off the hub via LAN.
    Property is a farmhouse on unmade track with no other properties nearby served by the phone wires. We are approx 1000m from the main road. I think if they could connect the wires into the cabinet at and of my track they might get the claimed speeds. I did a test using a known phone number of a house near that cabinet and it came back as 64mbps quoted , so theres obviously fibre in that cabinet.
    One more thing, there is currently broadband on another line in the same cable coming up my track, which is on my business line, I have kept this running but when infinity working better it can be cut off. I wonder if there could be any interference from one pair of wires to the other having 2 broadband signals travelleing 1000m together. Probably not but just trying to think of everything.

  • Post Moved Unable to download email attachments

    Post moved to Other BB Queries  http://community.bt.com/t5/Other-BB-Queries/Unable​-to-download-email-attachments/td-p/573621
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    Zooropa wrote:
    Hi,
    I have just got myself a new PC with Windows 7 (64bits). Using IE 8 (32 bit version), I am unable to download emails attachments from my normal Yahoo account ([email protected]). I have read somewhere that this could be due to the fact that Yahoo uses Norton as antivirus scan for email attachments, and that this could clash with BT NetProtectPlus (McAfee under the bonnet). Is there an option I need to switch off (and if so which one / how) in BT NetProtectPlus in order for me to be able to download attachments via Yahoo mail ?
    Please note that this used to work on my previous PC (Windowx XP).
    Thanks for your help. This is getting really frustrating !
    Hi. Welcome to the forums.
    To be honest, there would not really be a clash between the products you've mentioned, because the online system using Norton is a server system and actioned before any download. There is possibly an option in BTNetprotect for "email scanning" or similar. This option can be turned off in the general case, since disk writes are covered anyway,
    Have you tried another browser (e.g. Firefox, Opera or Safari) to see if the same conditions exist ?
    Is there any particular error message or delay you are seeing ?
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • Moving music from one computer to another

    I downloaded my music from another computer to an external drive, then uploaded to a new computer. I put it in the same folder as the current music from iTunes.   iTunes does not recognize that the music is there.  can someone help me get iTunes to see the music so it can be included on this new computer in the program?
    Thanks.
    Mike

    Unless you've moved away from the default iTunes settings simply copying the entire iTunes folder from <User's Music> on the source machine into <User's Music> on the target computer (over a network, or via an intermediate copy on a portable drive) will transfer the library.
    See this migrate iTunes library post for more.
    tt2

  • My folders take forever to open and then the docs within take a long time for the icon to pop up. the same thing with moving itmes from the desktop to a folder, and also emptying the trashh

    my folders take forever to open and then the docs within take a long time for the icon to pop up. the same thing with moving itmes from the desktop to a folder, and also emptying the trashh

    Don't know if that would be a failing hard drive, but it may be that you are out of available space. How much hard drive space do you have available? Please highlight the Macintosh HD icon and then press Command and I for a get info window. Once open, please copy and post the following:
    Capacity:
    Used:
    Available:
    Mac OS requires a minimum of 10 - 15% of total hard drive space available and empty at all times in order to operate properly.

  • Moving Stack from one folder to another?

    Is there a way to keep a stack together while moving it from one folder to another. When I grab the stack and drop it to a folder, I view the folder and the images are no longer in a stack. It would save me a lot of time if they would stay stacked. Am I missing something?
    Thank you.

    Well your code is unreadable because you didn't post it properly, but I'd guess you've fallen into the old multiple-delete trap in a new way. It's like this:
    To start with you have messages numbered 0, 1, and 2, let's say. So you write a loop that lets i run from 0 to 2 and delete message number i in the loop. What really happens? The first time through the loop you delete message number 0, after which you are left with messages numbered 0 and 1. The second time through the loop you delete message number 1, after which you are left with message 0 only. The third time through the loop you delete message 2, which isn't there and you get that message.
    That's just a guess, I didn't have the patience to read that ugly unformatted code. There are two ways to do the multiple delete properly, if that's actually your problem: (1) run the loop upwards from 0 and always delete message 0; (2) run the loop downwards from N-1 to 0 and delete message i.

Maybe you are looking for

  • Installing Photoshop CS2 on Macbook Pro

    Hi--recently had hard drive swapped with another machine, so now I need to reactivate Photoshop CS2--would not take my original serial number, so I went to the adobe site and downloaded the leagacy version and used the serial number provided for me. 

  • I can't seem to get  my iCloud working between my iPhone and iPad

    My wife and I recently purchased (in This order) an iPad, then 2 iPhones, then a second iPad. My iCloud on my devices is working fine. We are having trouble getting my wife's to work. I checked again, and was sure I had done what I was supposed to do

  • HR - have to add description for the customised field in infotype 4118.

    I need to add description for the customised field in info type 4118 in HR module.

  • Action Script 2 help

    Ok so here it is. I have a movie clip with continuous scrolling thumbnail movie clips inside it. Here is what I need to happen: Upon rolling over the thumbnails the movie clip stops scrolling, when you click on the thumbnails, another movie clip from

  • IOS 5.1.1 crashes all the time...

    Perhaps I wasn't clear before, I'll try to explain better this time... I soent close to $1000 buying an iPad 1, 64 GB 3g version when it first came out. Everything was fine until I ran the official Apple iOS 5 update, at which point the iPad became b