Post Moved What-Type-Of-Cable-Is-this

Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/What-Type-Of-Cable-Is-this/td-p/853858
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

It was the older type (pre 80s) of cable with an earlier colour coding (CW 1293)
Here is the colour coding.
The predominate wire is the coloured wire ( Blue, Orange, Green,  Brown, Grey) It then has it's associated white wire which, if you carefully strip of the outer insulation of the overal cable you will see that this pair (Blue/white) is twisted together.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Similar Messages

  • What Type Of Cable Is this???

    Ok this cable comes into my house through the attic, and goes down into the wall to a junction box that connects to the standard type phone cable, but it was filled in with bonding and smoothed over so I am not digging it out again. It seems to have 12 wires in it and the colour coding is different?? Any ideas what this cable is and what wires I need to connect to the standard cable again?
    Solved!
    Go to Solution.

    It was the older type (pre 80s) of cable with an earlier colour coding (CW 1293)
    Here is the colour coding.
    The predominate wire is the coloured wire ( Blue, Orange, Green,  Brown, Grey) It then has it's associated white wire which, if you carefully strip of the outer insulation of the overal cable you will see that this pair (Blue/white) is twisted together.
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • HT5219 I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

    I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

    No. Your iMac only has DVI video connection. You would need an iMac with Thunderbolt.

  • For the new airport extreme what type of cable do I need to connect to my cable modem. Is Cat5 OK or will that bottle neck things?

    For the new airport extreme what type of cable do I need to connect to my cable modem. Is Cat5 OK or will that bottle neck things?

    Assuming that your cable modem has Gigabit Ethernet ports (possible, but it probably does not) Cat 5e or Cct 6 would do the job that you need.
    If the cable modem is using a 10/100 Mbps port, then Cat5 will be OK.

  • What type of cable do I have to use for use my iPad with a normal priner ?

    I need to know what type of cable I have to use to install my regular printer to my iPad

    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
     Cheers, Tom

  • What type of cable is required to move photos from iPhone 4 to Mavericks iMac?

    what type of cable is required to move photos from iphone 4 to imac mavericks?

    The Apple cable that shipped with the iPhone - the same cable you use to sync the iPhone with iTunes on your computer, charge the iPhone with your computer and with the included power adaptor.
    http://support.apple.com/kb/ht4083
    With a Mac you can use iPhoto to import photos/videos from the iPhone's Camera Roll, or the Image Capture application as with any other digital camera with both applications included with every Mac.

  • [WRT54G] What type of cable to connect router to cable-modem?

    Hi,
    What type of cable do I have to use to connect a WRT54G router to a cable-modem, straight UTP or cross UTP?

    Normally you would use the standard (straight through) ethernet patch cable.

  • What type of brush gives this effect?

    What type of brush gives this effect? I'm guessing it is a custom brush. Maybe a mixer brush? Any ideas?

    Check out this thread:
    http://forums.lenovo.com/t5/IdeaCentre-Desktops-Home-Servers/change-the-POWER-SUPPLY-LITEON-310-WATT...

  • I have a new Mac with usb 3.0 ports. What type of cable do I use for an old usb 1 printer

    I have a new IMac with usb 3 ports. What type of cable do I use for conncting on older usb 1 device?

    AFAIK, use the USB 3.0 port to the printer. It should be backward compatible. If not, return the useless computer or get a new printer.

  • What type of cable??

    My screen went out on my g3 and am trying to connect it to a computer monitor (VGA). Apple does not sell cables for the ibook g3 laptop any more. I ordered two cables (mini display port and mini-DVI) and they were either to small or too big for my computer's outlet. The mini-DVI was the closest (but still too big). What cable is this, and do you have it? Please respond ASAP.
    Josh

    Addressed in your duplicate post.

  • Pkrb driver: What types of things should this speed up?

    Hi:
    I have a Java app that loads XML data into Oracle 8i using the XSU classes. Running outside of Oracle's JVM on an NT, it loads with a certain speed. I have code in there to choose the pkrb drivers when making a connection when applicable. When I use loadjava to load this app into 8i, it runs, but it actually runs a bit SLOWER than running outside (even if using JDK 1.2 outside of Oracle).
    I understood that when running in Oracle's JVM, since it was in the SGA, and the pkrb jdbc driver took advantage of that, etc., I should expect a fairly good boost in performance. What types of applications can expect this? Java procedures that deal with manipulating resultsets? It certainly doesn't appear to help table inserts.
    Thanks,
    Mike
    null

    FWIW, it is Oracle 8.1.6 running on a PIII 800.
    Mike
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Michael Gaffney ([email protected]):
    Hi:
    I have a Java app that loads XML data into Oracle 8i using the XSU classes. Running outside of Oracle's JVM on an NT, it loads with a certain speed. I have code in there to choose the pkrb drivers when making a connection when applicable. When I use loadjava to load this app into 8i, it runs, but it actually runs a bit SLOWER than running outside (even if using JDK 1.2 outside of Oracle).
    I understood that when running in Oracle's JVM, since it was in the SGA, and the pkrb jdbc driver took advantage of that, etc., I should expect a fairly good boost in performance. What types of applications can expect this? Java procedures that deal with manipulating resultsets? It certainly doesn't appear to help table inserts.
    Thanks,
    Mike<HR></BLOCKQUOTE>
    null

  • Sampling or Copying I get error "what type of file is this?"

    How can I sample .m4a files from itunes? Logic acts as if it does not recognize the file the first time then the second time it will ask me "what kind of file is this?". I've tried shortening the file name, converting the file in quicktime pro but it won't let me save the file under a different name. It's as if Logic Pro 7 has a mind of its own certain songs I just drag on to the arrange window and it copies fine others it does nothing please someone help me.

    these are copy protected files .m4a - i'm pretty sure.
    otherwise try changing the extension to a recognized format ie .mp3.
    or, open it in quictime and get info, it shoud tell you what type of file it is. then put the appropriate extension on the end

  • What Type of Font is this?

    Does anyone know what type of font this is?

    Thanks Noel,
    I can't seem to find what I am looking for.
    I am trying to replicate the numbers on the attached image, If anyone can help it will be greatly appreciated.

  • What type of effect is this?

    What type of effect do i need to use so i could get people from a normal photo to become black like on this one.
    https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/301715_10151222396407903_1747241031 _n.jpg
    thanks!

    HI
    Take your photos--Add a  'threshold' adjustment layer.  It should now be black and white.
    Add new layer.  Bucket fill layer with with desired colour and change layer type from 'Normal' to 'Multiply'.
    By changing the slider on the threshold layer you can reveal or hide more of the original image.
    Stuart

  • What type of pin is this?

    What type of PSU connector is this?
    this is wired from the power supply of Lenovo K330B.
    this connects to the front of the desktop.
    its only 3 pins.
    Picture:
    http://i81.photobucket.com/albums/j226/c…
    http://i81.photobucket.com/albums/j226/c…
    also,
    does any PSU comes with this or do i need some special adapter?

    Check out this thread:
    http://forums.lenovo.com/t5/IdeaCentre-Desktops-Home-Servers/change-the-POWER-SUPPLY-LITEON-310-WATT...

Maybe you are looking for

  • Cannot open customize OAF screen after upgrade to 12.1.3

    Hi, After upgrade to 12.1.3, I am not able top open customize OAF screens from Applications. By following some documents from MOS, I have done the following. 1)-applied patch 9879989 on Linux server. 2)-I am able to install JDeveloper,open and compil

  • Error during application installation on my MacBook Pro

    I am trying to install MasterWriter 2.0 onto my MacBook Pro without success. Actions Taken: When I contacted the 3rd Party Program TechSupport, he instructed me to delete folders, however the folders were never originally installed by the program, so

  • Create voltage over time

    Is it possible to generate an output voltage on a DAQ 6009 A0? I have an excel data sheet that I have put into a 2D array. The voltage is not constant over time. I am having difficulty with the timing of the signal. I have been able to plot the signa

  • MARS 6.1.1 and Symantec EndPoint Protection

    Does Mars support EndPoint, or will it in the near future?

  • Data source getdata

    Hi Guys, I want to get data from a Data Source by giving the cell number. For example in the following data can I get the value 1000 by giving the cell number 0  (something like TEXT_1.setText(DS_1.getDataAsString("value", {"Customer":0}));). I know