Post Netapp DOT Upgrade Performance Issue

We recently did some NetApp DOT upgrades. Everything went smoothly.Since then, one of our application development teams has started to report poor performance. We investigated all troubleshooting possibilities that we can think of - Windows servers layer, esxi host, storage and networks etc but to no avail. We've also engaged the software vendor and they have confirmed the app and db are adequately resourced. We also have a DBA investigating for us also.
One thing the application owner did mention is that performance started to degrade around Monday the 20th of July. Coincidentally or not, we did the Netapp DOT upgrade on the weekend of 18th/19th.The performance issues may not be linked at all but I just wondered if any others had experienced similar issues?Thanks.

Whats the controller model? Going from 8.1 to 8.2 on the entry \ some mid level controllers will have a performance impact

Similar Messages

RedHat AS4 and Oracle 10R2 upgrade - performance issue

Hi all,
As part of our database upgrade project (from Oracle 10.2.0.1 to 10.2.0.3), we decided to upgrade our OS as well (RedHat AS4 from Update 2 to Update 4, 64-bit). We are in testing phase now and having some serious performance issues.
These below are steps that we have performed:
1. Ran db load testing plus Application Regression testing in order to get a baseline
2. Upgraded RH AS4 from Update 2 to Update 4
3. Ran db load testing plus Application Regression testing
4. Database load testing (including massive parallel processes, like 'insert into ...', 'create indexes ...parallel',etc ...) showed significant slowdown compared to our 'baseline' test (Update 2): 70-80%. The database is still Oracle 10.2.0.1, only RH was updated at this point
5. We upgraded Oracle 10.2.0.1 to 10.2.0.3, latest CPU , etc ...(Update 4 on OS side) still same slowdown in performances ...
6. Our Application Regression Testing has showed performance degradation also but not in same extent as db load test (10-20 % on different application modules)
7. We also did one more thing : went back and upgraded Oracle with Update 2 (some 'workarounds' were required but that's another story). Performances were OK. So it seems our problem is not (directly) related to Oracle version.
Now we are going to install Update 6 (the latest update for AS4) and see how it goes.
If anybody have any experience or idea about this case and want to share it with us, it would be highly appreciated.
Thanks in advance,
Milan N.

Just a quick update for those who follow this thread ...
Everything worked fine with 'Update 6' kernel (both Oracle 10.2.0.1 and 10.2.0.3). We have also applied all available security packages.
Milan N.

11.2.0.0 upgrade- performance issue when commits

We have upgraded our data warehouse system from 10.2.0.4 for 11.2.0.2. After upgrade ETL system has performance issue. Extraction is fine because we compared the explain plans before and after upgrade. However, loading is taking very long. In loading there is a commit after every 1000 records, that why its slow. Even when we import data with commit=y option its very slow. Is there any know issue on this?
Any help pl?
Thanks

We are solaris 10. ETL job on 10.2.0.3 was taking 2 hours and now its taking 11 hours.
I beleive commit is a issue because
1. Source query (Extraction) has same explain plan.
2. Source database is still on 10.2.0.3
3. Servers and network is same for 10g and 11g.
4. I already experienced COMMIT=y performance issue in import.
Thanks

DI 11.5 to DS 12.2 Upgrade-Performance Issue

Hi dears,
I have faced a strange issue when we upgrade our DI 11.5 version to DS 12.2 version.
Our job service is running on HP-UX IA 64bit machine with 16 GB of RAM.
Before upgrade, the batch jobs can run successfully without any error.
However, after upgrade, we get some error messages that say System resources are not enough.
Data flow <DF_xxx> received a bad system message. Message text from the child process is <blank
                                                      message, possibly due to insufficient memory==========================================================
                                                      Please collect the following and send to Customer Support:
                                                      1. Log files(error_, monitor_, trace_*) associated with this failed job.
                                                      2. Exported Atl file of this failed job.
                                                      3. DDL statements of tables referenced in this failed job.
                                                      4. Data to populate the tables referenced in the failed job. If not possible, get the last few rows (or sample of them) when
                                                      the job failed.
                                                      5. Core dump, if any, generated from this failed job.
                                                      ==========================================================
What will be the cause of this error?
Because when you upgrade your software, you expect performance improvement about the memory management..
thanks a lot
omer

Hi Kevin,
Thx for the reply..
Yes, there table comparison and parallel processing. and also, the volume of the data is huge.
I mean, some of the tables has 130 million row records. It occurs when processing large loads.
the strange thing at this point is; within old version there is no problem. The flows are the same..
thx
omer

PI Interface Posting Files - Trigger Process Chain Issue

Dear Reader,
Situation -
We get multiple flat files from source system via PI interface. To process this in BW 7.0 side we have created the web service interface. In the function module we have written a code to trigger process chain, once a data is posted.
Issue -
As there are multiple files being posted, the PC runs on completion of the every single post, which is not desired. We need to run the process chain only once at the end of all the files being posted.
Notes -
1. Number of files keep varying.
2. Clubbing all the files in a single file and then posting it would cause performance issues.
Request your help in find a way like -
1. A file being posted of name, say 'START PC', which can be trapped in the funciton module and controll the PC call.
2. <any Other idea>
regards,
vinay gupta

Hi Dhanya,
This is the code i have in the ABAP program in the process chain. I just included the API_SEMBPS_POST part, but still it doesn't work. Please give me your email address so that i can send some screenshots.
REPORT ZHTEST.
DATA: l_subrc TYPE sy-subrc.
DATA: ls_return TYPE bapiret2.
CALL FUNCTION 'API_SEMBPS_POST'
IMPORTING
   E_SUBRC         = l_subrc
   ES_RETURN       = ls_return.
CALL FUNCTION 'RSAPO_CLOSE_TRANS_REQUEST'
EXPORTING
    I_INFOCUBE               = 'ZMAP_TAB'
EXCEPTIONS
ILLEGAL_INPUT            = 1
REQUEST_NOT_CLOSED       = 2
INHERITED_ERROR          = 3
OTHERS                   = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Performance issues since upgrade

I am on a late 2011 MacBook Pro and am having severs performance issues since upgrading to Mavericks. I fear my issues may be related to company installed anti-virus (which I cannot remove), but I was hoping someone could look over my EtreCheck for other potential solutions.
One really odd issue I am having, which I cannot seem to find good information for on Google, is at least 4-5 times a day my Mac just stops. No beach ball, no anything, for about 1-5 minutes. Then it's fine. Maybe just me grasping at straws, but it seems related to a when webpage loads a bunch of images? I always use Safari btw, but testing other browsers, like Chrome & Firefox, it happens as well.
I have also removed TotalFinder and have noticed no improvement and still have the above issue.
Thanks in advance!
Here is my EtreCheck:
Problem description:
slow performance on Mavericks
EtreCheck version: 2.0.11 (98)
Report generated November 11, 2014 at 8:51:26 AM EST
Hardware Information: ℹ️
MacBook Pro (17-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,3
1 2.5 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6770M - VRAM: 1024 MB
Color LCD 1920 x 1200
LED Cinema Display 1920 x 1200
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:46:22
Disk Information: ℹ️
APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 749.30 GB (256.69 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Fitbit Inc. Fitbit Base Station
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Tablet PTZ-630
Logitech Logitech USB Headset
Apple Inc. Display iSight
Apple Inc. Apple LED Cinema Display
Apple Inc. Display Audio
Apple Computer, Inc. IR Receiver
Firewire Information: ℹ️
Iomega HDD unknown_device 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
disk1s1 (disk1s1) <not mounted> : 32 KB
Iomega HDD (disk1s3) /Volumes/Iomega HDD : 500.04 GB (22.88 GB free)
Files (disk1s5) /Volumes/Files : 499.90 GB (416.87 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Library/Application Support/Symantec/Protector
[not loaded] com.symantec.kext.protector.panther (1.0f5) Support
[not loaded] com.symantec.kext.protector.tigerplus (1.0f5) Support
/Library/StartupItems/SymAutoProtect
[loaded] com.Symantec.kext.SAVAPComm (11.0.6) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[loaded] com.InnovationTechnology.driver.ComputerAudio (1.01 - SDK 10.7) Support
[not loaded] com.cisco.nke.ipsec (2.0.1) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) Support
Startup Items: ℹ️
CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
NortonMissedTasks: Path: /Library/StartupItems/NortonMissedTasks
SMC: Path: /Library/StartupItems/SMC
SymAutoProtect: Path: /Library/StartupItems/SymAutoProtect
SymProtector: Path: /Library/StartupItems/SymProtector
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.jamfsoftware.jamf.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.symantec.quickmenu.application.plist Support
[running] com.wacom.wacomtablet.plist Support
[running] net.juniper.pulsetray.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.fitbit.fitbitd.plist Support
[running] com.fitbit.galileod.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.jamfsoftware.jamf.daemon.plist Support
[not loaded] com.jamfsoftware.startupItem.plist Support
[loaded] com.jamfsoftware.task.1.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.rogueamoeba.instanton-agent.plist Support
[running] net.juniper.AccessService.plist Support
[loaded] net.juniper.UninstallPulse.plist Support
User Launch Agents: ℹ️
[loaded] com.valvesoftware.steamclean.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
gfxCardStatus Application (/Users/[redacted]/Downloads/gfxCardStatus.app)
Dropbox Application (/Applications/Dropbox.app)
Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
cdn Volume (/Volumes/cdn)
TotalFinder Application (/Applications/TotalFinder.app)
SAVDiskMountNotify Application (/Library/Application Support/Symantec/AntiVirus/SAVDiskMountNotify.app)
ScanNotification Application (/Library/Application Support/Symantec/AntiVirus/ScanNotification.app)
SymSecondaryLaunch Application (/Library/Application Support/Norton Solutions Support/Scheduler/SymSecondaryLaunch.app)
Internet Plug-ins: ℹ️
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.223
AdobePDFViewer: Version: 10.0.2 Support
Unity Web Player: Version: UnityPlayer version 4.5.4f1 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
iPhotoPhotocast: Version: 7.0
DirectorShockwave: Version: 11.5.9r620 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Silverlight: Version: 4.0.60310.0 Support
MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
net.juniper.DSSafariExtensions: Version: (null) Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.1.2 Support
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
User Internet Plug-ins: ℹ️
SOEWebInstaller: Version: 1.0 - SDK 10.5 Support
Aspera Web 3.1.2.72265: Version: (null) - SDK 10.6 Support
Safari Extensions: ℹ️
1Password
Adblock Plus
Reddit Enhancement Suite
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
MacFUSE Support
SymAutoProtect
Symantec\nQuickMenu Support
WacomTablet Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Destinations:
Iomega HDD [Local]
Total size: 500.04 GB
Total number of backups: 37
Oldest backup: 2014-10-14 14:11:11 +0000
Last backup: 2014-11-11 13:27:48 +0000
Size of backup disk: Excellent
Backup size 500.04 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      36% com.apple.WebKit.Plugin.64
      34% SymAutoProtect
      13% WindowServer
      9% Unity
      4% Activity Monitor
Top Processes by Memory: ℹ️
455 MB Safari
361 MB com.apple.WebKit.Plugin.64
292 MB Unity
77 MB com.apple.WebKit.Networking
77 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
2.08 GB Free RAM
2.39 GB Active RAM
1.34 GB Inactive RAM
1.40 GB Wired RAM
1.11 GB Page-ins
5.54 GB Page-outs

Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

CAT4900M and NetApp - Performance issue

Hi,
I'm struggling with a performance issue between our two NetApp Fas3170-devices.
The setup is quite simple: Each NetApp is connected via two TenGig interfaces to a CAT4900M. The 4900M's are also connected via two TenGig interfaces. Each pair of connections are bundled into an Layer2-etherchannel, configured as a dot.1q trunk. Mode is set to 'ON' on both the 4900 and the NetApp. According to NetApp documentation, this configuration is supported. Across each etherchannel, the vlans 219 and 220 are allowed. Two partitions are configured on the NetApp's, one being active in our primary datacenter and another in our secondary datacenter. Vlan219 and Vlan220 are configured for each the two partitions, using HSRP for gateway redundancy.
None of the interfaces nor the etherchannels shows any signs of misconfiguration. All links are up and etherchannels working as expected, well almost. Nothing indicates packet loss, crc-errors, Input/Output queue-drops or anything the would impact performance. Jumboframe is not configured, although this has been discussed.
The problem is, that we're unable to achieve satisfactory performance, when for instance, performing a volume copy between the two NetApp partitions. Even though we have a teoretical bandwidth of 20Gbps end-to-end, we never climb above 75-80 Mbytes of actual transfer-rate between the two NetApps. So performancewise, is almost looks as if we're "scaled" down to a 1Gig link. No QoS or other kind of ratelimiting has been implemented on the 4900's, so from a network point of view, the NetApps can go full-throttle. NetApp sw has been updated and configurations for both NetApp and 4900's have been revised by NetApp engineers and given a "clean bill of health".
The configuration for the 4900->NetApp etherchannel/interfaces is as follows:
interface TenGigabitEthernet1/5
description *** Trunk NetAPP DC1 ***
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 219,220
switchport mode trunk
udld port aggressive
channel-group 2 mode on
spanning-tree bpdufilter enable
interface TenGigabitEthernet1/6
description *** Trunk NetAPP DC1 ***
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 219,220
switchport mode trunk
udld port aggressive
channel-group 2 mode on
spanning-tree bpdufilter enable
interface Port-channel2
description *** Trunk Etherchannel DC1 ***
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 219,220
switchport mode trunk
spanning-tree bpdufilter enable
spanning-tree link-type point-to-point
Configuration for 4900->4900 interfaces/etherchannel is as follows:
interface TenGigabitEthernet1/1
description *** Site-to-Site trunk ***
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,219,220
switchport mode trunk
udld port aggressive
channel-group 1 mode on
interface TenGigabitEthernet1/2
description *** Site-to-Site trunk ***
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,219,220
switchport mode trunk
udld port aggressive
channel-group 1 mode on
interface Port-channel1
description *** Site-to-Site trunk ***
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,219,220
switchport mode trunk
spanning-tree link-type point-to-point
Vlan10 used for mngt-purpose.
Does anyone have similar experiences or suggestions as to why we're having theese performanceissues?
Thanks
/Ulrich
Message was edited by: UHansen1976

Hi,
Thanks for your reply.
I take it, that you mean baseline performance between the two NetApp's. Well, that's really out of my hands, as another department is responsible for the NetApp's. I'm not aware of any baseline performance, nor have I seen any benchmark tests or anything, that could give me hint.
Just as you suggest, I've gone through the switch-setup systematically. Basically, starting with the physical layer and working my way up. So far, I've found nothing that would indicate a physical problem. The switchport/etherchannel setup has been verified by my peers and also verified by NetApp according to the configuration on the NetApps, as well as the various best-practice documentation availible. Futhermore, I haven't seen any signs of packets drops, crc-errors, massive re-transmissions or anything like not, neither on the switches nor the NetApps.
Recently we had a status-meeting with our NetApp-partner and it looks to me like they're persuing the logical setup on the NetApps, as the're apparently a number of settings etc. that needs adjustment. Also, we're waiting for NetApp tech-support to comment on the traces, config-dump etc. we've send to them.
/Ulrich

Post 10.3 upgrade i started getting a lot of issues

Post 10.3 upgrade i started getting a lot of issues1) The apps minimize on its own.2) Call disconnect/connect the options/animation are late in responding. Call receive and disconnect is not smooth and fast considering 1.5 GB RAM even 1GB androids are faster.3) Never seens the BB Maps working.4) Wi-fi direct does not recognize nearby android device which has wifi direct on so faster transfer is not possible. Neither android software like shareit work.5) Phone is too slow even though i dont have many softwares installed.6) Internet browsers close down automatically and when i tried a UC browser from android market(amazonapp store) that also had the same issue so uninstalled that.Please suggest what is wrong with my Z3 an my experience which was great with the new Z3 initially is now fading out and i feel like selling it off in just 4-5 month of use.

OK...then reload that one...the key is reloading the OS, whatever version it is. As for the version info, what is offered to you is controlled by others (normally your carrier)...you won't receive an offer via the official methods for anything newer until they approve it. The most common thing to do after an update that results in issues is to perform an OS reload. Sometimes, the update processes have errors and such...with a reload often curing the issues. The official methods, which will be controlled as to what exact OS versions you are offered:http://supportforums.blackberry.com/t5/BlackBerry-10-Functions-and/How-to-Reload-your-Blackberry10-O...The unofficial methods, which are cleaner, and allow you to choose an OS version that perhaps your carrier (or whoever it is controlling your offers) has been slow to approve:http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...http://forums.crackberry.com/bb10-leaked-beta-os-f395/bb10-os-archive-943672/Of course, before you start any of this you will want a good backup via LINK, a manual copy of your Device Memory to your PC, and full documentation of your configuration (account credentials, added apps, configurations, etc.). Sometimes, restoring from a backup returns to the device the very corruption one needs to eliminate, and reconfiguring from scratch can resolve that. Good luck!

Major performance Issues after upgrading to 10.9.2

Hi,
I have been having major performance issues almost preventing me from using the computer at times. I suspect I don't have enough memory to run Maverick as the computer was great before I upgraded.
If any experts or people with ideas for me to speed up the computer, please respond. If you think the only way to improve performance is add memory or revert back to a previous version of OSX that I have a backup for, let me know.
Here is the info on my system, thank you in advance!!
Hardware Information:
          MacBook Pro (15-inch, Late 2008)
          MacBook Pro - model: MacBookPro5,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          2 GB RAM
Video Information:
          NVIDIA GeForce 9400M - VRAM: 256 MB
          NVIDIA GeForce 9600M GT - VRAM: 256 MB
System Software:
          OS X 10.9.2 (13C1021) - Uptime: 3 days 21:20:10
Disk Information:
          Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    :c (disk0s2) / [Startup]: 249.2 GB (67.82 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-868
USB Information:
          Apple Inc. Built-in iSight
          Apple, Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Fitbit Inc. Fitbit Base Station
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Configuration files:
          /etc/sysctl.conf - Exists
          /etc/hosts - Count: 29
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [not loaded] com.LaCie.ScsiType00 (1.2.0) Support
          [not loaded] com.cisco.nke.ipsec (2.0.1) Support
          [not loaded] com.leapfrog.codeless.kext (2) Support
          [not loaded] com.leapfrog.driver.LfConnectDriver (1.8.1 - SDK 10.7) Support
          [not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
          [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) Support
          [not loaded] net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
          [not loaded] net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
Startup Items:
          CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
Problem System Launch Daemons:
          [failed] com.apple.wdhelper.plist
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.adobe.SwitchBoard.plist Support
          [running] com.fitbit.galileod.plist Support
          [loaded] com.google.keystone.daemon.plist Support
          [loaded] com.leapfrog.connect.shell.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
          [running] com.zeobit.MacKeeper.AntiVirus.plist Support
          [running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.adobe.CS5ServiceManager.plist Support
          [running] com.brother.LOGINserver.plist Support
          [running] com.google.keystone.agent.plist Support
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist Support
          [failed] [email protected]
          [loaded] com.macpaw.CleanMyMac.helperTool.plist Support
          [running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
          [running] com.zeobit.MacKeeper.Helper.plist Support
User Login Items:
          Google Chrome
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.3.1.18536 Support
          Google Earth Web Plug-in: Version: 7.1 Support
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
          OfficeLiveBrowserPlugin: Version: 12.2.9 Support
          AdobePDFViewerNPAPI: Version: 10.1.9 Support
          FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
          DivXBrowserPlugin: Version: 2.0 Support
          Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.201 - SDK 10.6 Outdated! Update
          iPhotoPhotocast: Version: 7.0
          googletalkbrowserplugin: Version: 5.3.1.18536 Support
          QuickTime Plugin: Version: 7.7.3
          AdobePDFViewer: Version: 10.1.9 Support
          GarminGpsControl: Version: 2.6.4.0 Release Support
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
          Dashlane: Version: 2.4.0.55923
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 Support
          Move_Media_Player: Version: npmnqmp 071705000010 Support
          WebEx64: Version: 1.0 - SDK 10.6 Support
          Picasa: Version: 1.0 Support
3rd Party Preference Panes:
          Flash Player Support
          Flip4Mac WMV Support
          Growl Support
Time Machine:
          Skip System Files: NO
          Auto backup: NO - Auto backup turned off
          Time Machine not configured!
Top Processes by CPU:
               3%          WindowServer
               2%          SystemUIServer
               1%          diskimages-helper
               1%          mds
               0%          Google Chrome Helper EH
Top Processes by Memory:
          94 MB          Google Chrome
          59 MB          GoogleSoftwareUpdateDaemon
          57 MB          Google Chrome Helper EH
          52 MB          Google Chrome Helper
          39 MB          Finder
Virtual Memory Information:
          40 MB          Free RAM
          499 MB          Active RAM
          481 MB          Inactive RAM
          465 MB          Wired RAM
          7.33 GB          Page-ins
          502 MB          Page-outs

The performance issues are due to third party software. Mavericks at the minimum requires 2GB's of RAM but I don't think that's the issue. And you can upgrade RAM anytime.
MacKeeper should be uninstalled. It does far more harm than good.
Do not install MacKeeper: Apple Support Communities
Uninstall instructions > how to uninstall MacKeeper
249.2 GB (67.82 GB free)
Keep an eye on available disk space.
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space. Less can slow your Mac down.
You also need to uninstall CleanMyMac > How To Uninstall CleanMyMac
Third party so called Mac cleaning utilities are not necessary on a Mac. Your Mac runs maintenance in the background for you.
Mac OS X: About background maintenance tasks

Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query

Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
        INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
        FROM COSP CLIENT SPECIFIED
        WHERE GJAHR IN SELR_GJAHR
          AND KSTAR IN SELR_KSTAR
          AND LEDNR EQ '00'
          AND OBJNR IN SELR_OBJNR
          AND PERBL IN SELR_PERBL
          AND VERSN IN SELR_VERSN
          AND WRTTP IN SELR_WRTTP
          AND MANDT IN MANDTTAB
        GROUP BY (GROUP_LIST).
   LOOP AT I_COSP      .
     COSP                           = I_COSP      .
     PERFORM PCOSP       USING I_COSP-_COUNTER.
     CLEAR: $RWTAB, COSP                          .
     CLEAR CCR1S                         .
   ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.

Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
                   endselect.
   SELECT
into table
   for all entries in table
where.
   use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
    e.g in your case
          sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya

Performance Issues after an Upgrade

Hello!
We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
1) What could be the causes/factors for the performance to degrade after an upgrade?
2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
Please let me know your thoughts on this.
Thanks,
- Krrish

There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
HTH-
Jasmine.

RFBIBL00 Performance issues Post ECC6

Hi Folks,
Have just completed ECC6 upgrade am seeing terrible performance issues when using RFBIBL00 for loading. All loads seem to stick reading table TBIZU. DB Is oracle and table is quite small. Stats are valid and when checking explain plan in oracle the query seems to be fine.
Anybody seen anything similar.
ta

hi,
Please check this link
[Re: rfbibl00;
regards,
suhas

DB Performance Issues after 10g Upgrade in EBS Instance

We have upgraded our Database from 9i to 10g as first part of EBS 11.5.9 to 11.5.10.2 upgrade. Currently our production is running on 11.5.9 apps with 10g DB.
Facing performance problems now. one of the them is, one Valueset query not using funcion based index while fired from the front end. but the same query when collected from SQL trace tkprofed file and executed from SQL Plus, it uses all proper indexes. We are not getting the cause of this.
Had anyone faced same kind of issues before. please suggest.
thanks,
Raj.

Make sure you have all of the recommended performance patches for 11.5.9, and gather stats for SYS and SYSTEM in the following manner:
Oracle E-Business Suite Recommended Performance Patches
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=244040.1
Collecting Statistics with Oracle Apps 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=368252.1
execute dbms_stats.unlock_schema_stats('SYS');
execute dbms_stats.unlock_schema_stats('SYSTEM');
exec dbms_stats.gather_schema_stats('SYSTEM',options=>'GATHER', estimate_percent => 100, method_opt => 'FOR ALL COLUMNS SIZE AUTO', cascade => TRUE);
exec dbms_stats.gather_schema_stats('SYS',options=>'GATHER', estimate_percent => 100, method_opt => 'FOR ALL COLUMNS SIZE AUTO', cascade => TRUE);
exec dbms_stats.gather_fixed_objects_stats();
commit;
exec dbms_stats.DELETE_TABLE_STATS('SYS','X$KCCRSR');
exec dbms_stats.LOCK_TABLE_STATS('SYS','X$KCCRSR');
commit;
The last 3 commands resolve problems with RMAN, in case you are using it.
Rman Backup is Very Slow selecting from V$RMAN_STATUS
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=375386.1
Poor performance when accessing V$RMAN_BACKUP_JOB_DETAILS
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=420200.1
Troubleshooting Oracle Applications Performance Issues
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=169935.1
Debugging General Performance Issues with Oracle Apps
http://blogs.oracle.com/schan/newsItems/departments/optimizingPerformance/2007/05/18#a1548
Performance Tuning the Apps Database Layer
http://blogs.oracle.com/schan/newsItems/departments/optimizingPerformance/2007/05/17#a1562
Preventing Apps 11i Performance Issues in Four Steps
http://blogs.oracle.com/schan/newsItems/departments/optimizingPerformance/2007/05/21#a1566

Performance issue with Crystal when upgrading Oracle to 11g

Dear,
I am facing performance issue in crystal report and oracle 11g as below:
In ther report server, I have created a ODBC for connect to another Oracle 11g server. also in report server I have created and published a folder to content all of my crystal report. These report can connect to oracle 11g server via ODBC.
and I have a tomcat server to run my application in my application I refer to report folder in report server.
This way can work with SQL server and oracle 9 or 10g but it facing performance issue in oracle 11g.
please let me know the root cause.
Notes: report server, tomcate server are win 32bit, but oracle is in win 64bit, and i have upgraded DataDirect connect ODBC version 6.1 but the issue can not resolve.
Please help me to solve it.
Thanks so much,
Anh

Hi Anh,
Use a third party ODBC test tool now. SQL Plus will be using the Native Oracle client so you can't compare performance.
Download our old tool called SQLCON: https://smpdl.sap-ag.de/~sapidp/012002523100006252882008E/sqlcon32.zip
Connect and then click on the SQL tab and paste in the SQL from the report and time that test.
I believe the issue is because the Oracle client is 64 bit, you should install the 32 bit Oracle Client. If using the 64 bit client then the client must thunk ( convert 64 bit data to 32 bit data format ) which is going to take more time.
If you can use OLE DB or using the Oracle Server driver ( native driver ) should be faster. ODBC puts another layer on top of the Oracle client so it too takes time to communicate between the layers.
Thank you
Don

SharePoint 2007 performance issue after upgrading the operating system

We upgraded the operating system of our SharePoint Server 2007 from 2003 to 2008 R2. After upgrade we rebuilt the SharePoint using content DBs we backed up before upgrade. All settings is same except that we moved the DBs to new SQL servers. Now users are
reporting performance issue with sites. I experienced it myself some of the pages takes 9-30 seconds to load. Also our SharePoint server is single server. I monitored the SharePoint Server and it is fine. I did fiddler trace and here are the result. I see
lots of 401 (login failed) errors then 302 (redirect) then 200 (OK). Do you know why we are getting 401 errors?
Result
Protocol
Host
URL
Body
Caching
Content-Type
Process
184
401
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA
341
text/html; charset=us-ascii
iexplore:15344
185
302
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA
196
text/html; charset=UTF-8
iexplore:15344
186
401
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA/default.aspx
341
text/html; charset=us-ascii
iexplore:15344
187
200
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA/default.aspx
105,487
private, max-age=0; Expires: Mon, 22 Dec 2014 21:37:48 GMT
text/html; charset=utf-8
iexplore:15344
188
401
HTTP
sp07.ourcompany.com
/_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
341
text/html; charset=us-ascii
iexplore:15344
189
200
HTTP
sp07.ourcompany.com
/_layouts/images/prevbuttonltr.gif
76
max-age=31536000
image/gif
iexplore:15344
190
200
HTTP
sp07.ourcompany.com
/_layouts/images/nextbuttonltr.gif
78
max-age=31536000
image/gif
iexplore:15344
191
200
HTTP
sp07.ourcompany.com
/_layouts/images/day.gif
1,051
max-age=31536000
image/gif
iexplore:15344
192
200
HTTP
sp07.ourcompany.com
/_layouts/images/month.gif
1,068
max-age=31536000
image/gif
iexplore:15344
193
200
HTTP
sp07.ourcompany.com
/_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
28,814
max-age=31536000
text/css
iexplore:15344
194
200
HTTP
sp07.ourcompany.com
/_layouts/images/week.gif
1,057
max-age=31536000
image/gif
iexplore:15344
195
200
HTTP
sp07.ourcompany.com
/_layouts/images/weekbox.gif
149
max-age=31536000
image/gif
iexplore:15344
196
200
HTTP
sp07.ourcompany.com
/_layouts/images/alldayDefault.gif
157
max-age=31536000
image/gif
iexplore:15344
197
200
HTTP
sp07.ourcompany.com
/_layouts/images/calnumBttntoday.gif
146
max-age=31536000
image/gif
iexplore:15344
198
200
HTTP
sp07.ourcompany.com
/_layouts/images/calnumBttn.gif
95
max-age=31536000
image/gif
iexplore:15344

Hi
when you request a Site collection (http://domain/) or a Site (http://domain/foo/) of your Publishing Site you get redirected to the http://domain/Pages/<WelcomePage>.aspx. SharePoint 2007 uses the 302 header (location temporarily moved) for
this purpose. Surprisingly even WSS uses the 302 header to redirect a root url to the default.aspx. In comparison ASP.NET uses an internal redirect to render the default page when the root url requested: there is no redirect in this situation.
Check the link which can give more input
http://blog.mastykarz.nl/sharepoint-2007-redirect-solved-using-301-instead-of-302-redirects/
for error 401 you can check this link
http://discussions.citrix.com/topic/97027-no-resources-401-unauthorized/d
and check SharePoint ULS logs and event viewer for any exceptions.
Please mark the Answer and Vote me if you think that it will help you to resolved your issue

Post Netapp DOT Upgrade Performance Issue

Similar Messages

Maybe you are looking for