Post office crashes when user sends to same group

we have a user that send emails to two groups. the group members are all internal besides one address in one of the groups.. when they send an email to these two groups, the linux 8.0.2 poa crashes. it starts backup sometimes the first time but sometimes we have to start it twice. immediately on startup it sends an error DA03 for that user to administrator. when i goto that users mailbox and look at sent items, that mail has tried to send the same time the poa crashes. when i look at the properties of the email, it has been transferred to the external address but still pending for all the internal addresses. has anyone seen this before or have any thoughts?? we have told the user not to send to these groups anymore until we figure this out. the emails are a forwarded email and the original email seems to be from the same two external email addresses...

Originally Posted by kchurch
we have a user that send emails to two groups. the group members are all internal besides one address in one of the groups.. when they send an email to these two groups, the linux 8.0.2 poa crashes. it starts backup sometimes the first time but sometimes we have to start it twice. immediately on startup it sends an error DA03 for that user to administrator. when i goto that users mailbox and look at sent items, that mail has tried to send the same time the poa crashes. when i look at the properties of the email, it has been transferred to the external address but still pending for all the internal addresses. has anyone seen this before or have any thoughts?? we have told the user not to send to these groups anymore until we figure this out. the emails are a forwarded email and the original email seems to be from the same two external email addresses...
Is this still happening to you? We're seeing this issue as well and were wondering if you got a working resolution?

Similar Messages

Outlook 2013 crashed when user sending email from Adobe Writer xi pro ver 11.0.07

I ask Adobe, but they are signaling to Outlook problem
PC-HP, Windows 8.1 Pro X64 connected to Windows 2008 R2 DC
Adobe Acrobat Pro ver 11,x
When user trying to send email from Adobe direct, Outlook 2013 Pro is crashing
The only way to send email is to save adobe ( PDF) file and attached to the email
All patches are installed

Log Name: Application
Source: Application Error
Date: 7/15/2014 8:05:38 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Liz7PM-HP.armadale.local
Description:
Faulting application name: Acrobat.exe, version: 11.0.7.79, time stamp: 0x536b812b
Faulting module name: SendMail.api, version: 11.0.7.79, time stamp: 0x536b7fd0
Exception code: 0xc0000005
Fault offset: 0x0003390b
Faulting process id: 0x139c
Faulting application start time: 0x01cfa024deec4218
Faulting application path: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
Faulting module path: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SendMail.api
Report Id: 553a89c7-0c18-11e4-be97-80c16ee27020
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-07-15T12:05:38.000000000Z" />
<EventRecordID>66128</EventRecordID>
<Channel>Application</Channel>
<Computer>Liz7PM-HP.armadale.local</Computer>
<Security />
</System>
<EventData>
<Data>Acrobat.exe</Data>
<Data>11.0.7.79</Data>
<Data>536b812b</Data>
<Data>SendMail.api</Data>
<Data>11.0.7.79</Data>
<Data>536b7fd0</Data>
<Data>c0000005</Data>
<Data>0003390b</Data>
<Data>139c</Data>
<Data>01cfa024deec4218</Data>
<Data>C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe</Data>
<Data>C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SendMail.api</Data>
<Data>553a89c7-0c18-11e4-be97-80c16ee27020</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Log Name: Application
Source: Windows Error Reporting
Date: 7/15/2014 8:05:55 AM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: Liz7PM-HP.armadale.local
Description:
Fault bucket 73304412188, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Acrobat.exe
P2: 11.0.7.79
P3: 536b812b
P4: SendMail.api
P5: 11.0.7.79
P6: 536b7fd0
P7: c0000005
P8: 0003390b
P9:
P10:
Attached files:
C:\Users\ewhitton\Desktop\140.pdf
C:\Users\ewhitton\AppData\Local\Temp\WER8000.tmp.WERInternalMetadata.xml
C:\Users\ewhitton\AppData\Local\Temp\WER8BB9.tmp.appcompat.txt
minidump.mdmp
These files may be available here:
C:\Users\ewhitton\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Acrobat.exe_2a26ba191a528da71b85271ed9509f7e426babf8_0d6f35c4_1735c074
Analysis symbol:
Rechecking for solution: 0
Report Id: 553a89c7-0c18-11e4-be97-80c16ee27020
Report Status: 4104
Hashed bucket: f6a7a946597169e4aea5077b3b7f0848
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-07-15T12:05:55.000000000Z" />
<EventRecordID>66131</EventRecordID>
<Channel>Application</Channel>
<Computer>Liz7PM-HP.armadale.local</Computer>
<Security />
</System>
<EventData>
<Data>73304412188</Data>
<Data>1</Data>
<Data>APPCRASH</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>Acrobat.exe</Data>
<Data>11.0.7.79</Data>
<Data>536b812b</Data>
<Data>SendMail.api</Data>
<Data>11.0.7.79</Data>
<Data>536b7fd0</Data>
<Data>c0000005</Data>
<Data>0003390b</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
C:\Users\ewhitton\Desktop\140.pdf
C:\Users\ewhitton\AppData\Local\Temp\WER8000.tmp.WERInternalMetadata.xml
C:\Users\ewhitton\AppData\Local\Temp\WER8BB9.tmp.appcompat.txt
minidump.mdmp</Data>
<Data>C:\Users\ewhitton\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Acrobat.exe_2a26ba191a528da71b85271ed9509f7e426babf8_0d6f35c4_1735c074</Data>
<Data>
</Data>
<Data>0</Data>
<Data>553a89c7-0c18-11e4-be97-80c16ee27020</Data>
<Data>4104</Data>
<Data>f6a7a946597169e4aea5077b3b7f0848</Data>
</EventData>
</Event>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Log Name: Application
Source: Outlook
Date: 7/15/2014 8:06:05 AM
Event ID: 50
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: Liz7PM-HP.armadale.local
Description:
The following providers do not implement fast shutdown APIs, but are being shut down using fast shutdown:
MDConnector.dll (MAPI Store Provider)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Outlook" />
<EventID Qualifiers="16384">50</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-07-15T12:06:05.000000000Z" />
<EventRecordID>66132</EventRecordID>
<Channel>Application</Channel>
<Computer>Liz7PM-HP.armadale.local</Computer>
<Security />
</System>
<EventData>
<Data>MDConnector.dll (MAPI Store Provider)
</Data>
</EventData>
</Event>

GroupWise 2012 Post Office crashes.

2 of 5 post offices crash randomly. 1 PO is on an entirely different server and network. The POs started crashing after we upgraded to GroupWise 2012. Both POs run on SLES v. 10 fully patched. 1 of the POs runs in a clustered environment and other POs on the same server stay running when the problem PO crashes. The other problem PO is on a dedicated server along with the MTA and domain. I have run GW maintenance through ConsoleOne on both POs. I have renamed the wpcsin & wpcsout from postoffice directory and the ngwcheck.db files and ran maintenance from ConsoleOne. The issue still remains. Below is from the messages log and is the common error that is received when the POs go down. Any help would be appreciated.
May 22 10:14:24 lxnode02 kernel: gwpoa[28661]: segfault at 00000000e6eea691 rip 00000000f777a59e rsp 00000000ef73a210 error 6

Originally Posted by ellisck
2 of 5 post offices crash randomly. 1 PO is on an entirely different server and network. The POs started crashing after we upgraded to GroupWise 2012. Both POs run on SLES v. 10 fully patched. 1 of the POs runs in a clustered environment and other POs on the same server stay running when the problem PO crashes. The other problem PO is on a dedicated server along with the MTA and domain. I have run GW maintenance through ConsoleOne on both POs. I have renamed the wpcsin & wpcsout from postoffice directory and the ngwcheck.db files and ran maintenance from ConsoleOne. The issue still remains. Below is from the messages log and is the common error that is received when the POs go down. Any help would be appreciated.
May 22 10:14:24 lxnode02 kernel: gwpoa[28661]: segfault at 00000000e6eea691 rip 00000000f777a59e rsp 00000000ef73a210 error 6
There are several known issues with crashing POA's. Make sure you'll be able to send a core dump and supportconfig to Novell, open an SR and they can provide you with an updated build in which the crashing should occur much less frequently.

Post income crashes when "Waiting to update this Folder" appears in the outlook mailbox.

Post income crashes when "waiting to update this folder" appears in the outlook mailbox (outlook 2007) We have already done the basic troubleshooting of remove the cached exchange mode, this does not resolve the problem. Also we have tried following
on the MS article of basic troubleshooting
http://support.microsoft.com/kb/842284 and KB2000071
Many of the users now are facing this issue. OWA is working fine also mails on Mobile devices are working fine except for outlook client 2007.
Can any one help.
Regards,
Pralhad
Pralhad

Hi,
The Event Viewer can be a great help to determine the root cause of an issue or to find new leads in case regular troubleshooting of Outlook didn’t bring any results.
Open the Event Viewer:
Press Win + R and type “eventvwr” in the blank box, then press Enter.
You may find the Error Entries for Outlook, also Event ID, text description after the crash happens, post the information in the forum and maybe we can find something useful to find the root cause.
You may know more about Event logs from this article below:
http://windows.microsoft.com/en-hk/windows/what-information-event-logs-event-viewer#1TC=windows-7
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

CS4 crashes when I send to print and pen tool loses the ability to keep the attributes of a multi-stroked line.

Using Illustrator CS4 (can't upgrade because the office I am contracted with will not upgrade) on a Mac running Mavericks 10.9.5 (just upgraded from 10.6). CS4 crashes when I send to print (I've been saving as a PDF and printing that). Also, the pen tool loses the ability to keep the attributes of a multi-stroked line.

Thanks, Larry. I should have remembered the "…Basic Appearance…" thingy. I've tutored enough people in Illustrator—it just never occurred to me. As for the printer, I'll give that a shot. I'll fumble my way around in that; not sure exactly how to go about doing it, but I'm game. Thank you for your help. — Jim

HT201320 when i send an email using my hotmail address through outlook my contacts do not receive the mail. when i send the same mail through my iPad or iPhone no problem my contacts receive the mail. this only problem happens when i send mail with my mac

I have a hotmail email address. I compose my mail useing MS outlook. when i send the mail to my contacts useing my macbook air,my contacts tell me there have not received the mail.
when i send the same message with my ipad or iphone no problem my contacts receive the mail.
what is the problem?

Blair84 wrote:
Double check your contacts email, and if its incorrect, go to their contact and change it and save it or you can delete the email you put in, and manually type it in.
Hope this helps.
How would that help the original poster?

My gmail crashes when I add attachment same with facebook, what can I do to fix this?

my gmail crashes when I add attachment same with facebook, what can I do to fix this?

That is not an Apple or OS X issue, I'd suggest contacting the modem manufacturer to see what the issue might be.

Reader 11.0.2 crashes when user rt-clicks in the .pdf document

When user right-clicks inside a fillable .pdf (i.e. as if to rt-click/copy or rt-click/paste) she gets the error "Adobe Reader has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." This occurs 100% of the time when right-clicking. Unfortunately, Windows hasn't notified me of a solution yet...
Event Viewer info:
Faulting application name: AcroRd32.exe, version: 11.0.2.0, time stamp: 0x511eacd6
Faulting module name: AcroRd32.exe, version: 11.0.2.0, time stamp: 0x511eacd6
Exception code: 0x40000015
Fault offset: 0x000b7ea0
Faulting process id: 0x15f4
Faulting application start time: 0x01ce4d860e1f16e2
Faulting application path: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
Faulting module path: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
Report Id: 4dbe18ec-b979-11e2-87e7-b4b52f7b910a
Per other forum posts, I have tried uninstalling/reinstalling reader and then running EULA.exe and I also disabled Protected Mode. Problem persists.
It should be noted that Reader also crashes at other (non-right click) times as well, but without knowing exactly when it occurs, I'm unable to isolate those specific reports from the 100's of other reader crash reports in event viewer. I've asked the user to document the date/time that reader next suffers a (non rt-click) crash.

This is not something I have seen before. I see that you have already tried various solutions that may prevent crashes, without any result.
The only advice that I have for now is not to right-click, but use standard keyboard shortcuts like Ctrl+C (copy) and Ctrl+V (paste).

Crash when I send mail with attachments.

Having upgraded to 10.6, when I send an email (through Mail) which has an attachment, Mail will crash. This is bad. Bad, Bad, bad,bad, BAD! Almost every email I want to send has to have attachments, and so mu mail has (effectively) been crippled.
This is something I need a solution to YESTERDAY!

I have the same problem, but its not limited to Mail. whenever I attach a file to mail or entourage or import to word, or upload via facebook or safari, i get a crash
any help on this issue would be advisable

Microsoft office crashes when trying to print

Hi, upgraded my Mac from Maverick to Yosemite and now my Excel, Word, Powerpoint randomly crash when i try to print (doesnt matter if i try to print to an actual printer or make it into a pdf.). At the beginning I noticed that especially it happened when i want to print just 1 page out of a longer Word document OR i am changing from letter to ledger size in Excel but now there is no rhyme or reason.
I did the Office updates, re-started obviously but as i am not very good at this software troubleshooting then i am at loss...
Hopefully someone can help!

here is the crash report (if i got it right)
Dec 23 09:38:02.479389 Janas-MacBook-Pro.local discoveryd_helper[152]: Basic RemoteControl com.apple.discoveryd_helper Starting XPC Server
Dec 23 09:38:02.480012 Janas-MacBook-Pro.local discoveryd_helper[152]: Detailed RemoteControl com.apple.discoveryd_helper XPC connection 0x7f8f88c03140: start (pid=56, <unknown> not root)
Dec 23 13:36:22.726069 Janas-MacBook-Pro.local discoveryd_helper[156]: Basic RemoteControl com.apple.discoveryd_helper Starting XPC Server
Dec 23 13:36:22.726723 Janas-MacBook-Pro.local discoveryd_helper[156]: Detailed RemoteControl com.apple.discoveryd_helper XPC connection 0x7f8570d074d0: start (pid=56, <unknown> not root)
Dec 23 13:46:56.270157 localhost discoveryd_helper[142]: Basic RemoteControl com.apple.discoveryd_helper Starting XPC Server
Dec 23 13:46:56.270861 localhost discoveryd_helper[142]: Detailed RemoteControl com.apple.discoveryd_helper XPC connection 0x7fdc8bd00de0: start (pid=56, <unknown> not root)
Dec 23 14:11:02.003717 Janas-MacBook-Pro.local discoveryd_helper[142]: Basic RemoteControl com.apple.discoveryd_helper Starting XPC Server
Dec 23 14:11:02.004707 Janas-MacBook-Pro.local discoveryd_helper[142]: Detailed RemoteControl com.apple.discoveryd_helper XPC connection 0x7ffdcad01960: start (pid=56, <unknown> not root)

GroupWise8 crashes when removing sender from "TO" field

Hi guys,
A user is having GroupWise crash when they go to remove a contact from the "To:" field while composing an email.
The Event viewer ID:1000 states: Faulting application name: grpwise.exe, version: 8.0.3.21995, time stamp: 0x4fda7d4c
Faulting module name: gwabu1.dll, version: 8.0.3.21995, time stamp: 0x4fda7938
Exception code: 0xc0000005
Fault offset: 0x0005eecb
Faulting process id: 0xa14
Faulting application start time: 0x01ce4fec1ff44bec
Faulting application path: C:\Program Files (x86)\Novell\GroupWise\grpwise.exe
Faulting module path: C:\Program Files (x86)\Novell\GroupWise\gwabu1.dll
Report Id: 01b72261-bbed-11e2-a47b-180373dcb5bf
Thanks!

Hi
DEP and GroupWise do not play nicely together. I would recommend that you turn it off.
Cheers,

Premiere CC keeps crashing when moving or deleting a group of clips

Hello,
I am getting this weird bug where Premiere CC keeps crashing when I am trying to delete or move (either by using drag'n drop or cut-and-paste*) a selected group of clips on the timeline.
The sequence is set to QT ProResHQ for video previews to match the codec of the video files, so this couldn't explain this issue.
Here is the error message I am getting everytime:
Premiere Pro has encountered an error.
[/ppro721/releases/2013.10/shared/adobe/MediaCore/Backend/Make/Mac/../../Src/Sequence/Pers istentGroupContainer.cpp-279]
* Copy-paste does work though, that's my workaround for the moment: I copy the selected group of clips, then delete the "originals" one by one, because Premiere crashes only when I am trying to delete or move more than one clip at a time...
Even though I have found a temporary workaround for this weird problem, it's really frustrating as it keeps happening randomly throughout the sequence (not all clips on the same timeline are affected by this), and it complicates the execution of such basic operations as deleting or moving clips around on a timeline.
Any help is welcome, as I keep wasting a lot of precious editing time with this issue.
Thank you.

KT7373
What computer operating system is your Premiere Elements 9 running on and are you running the 9.0.1 Update version of the program. Just background information.
To each of the three groups, have you first applied the Group option under the Clip Menu? If so, you do not use Alt or Ctrl. You click and drag the selected/highlighted Group to where you want it. Doing that, to the extreme, I can move the Groups including dragging Group 2 over Group 3 to place Group 2 after Group 3 and no disturbances.
But you must wait the the Group to be selected/highlighted completely before you move it.
However, could it be that you have lost control of your project for resource reasons. Besides the 24 tracks high and the body of the tracks in three Groups, what is the duration of this project? Premiere Elements 9.0/9.0.1 is a 32 bit application whether it is run on a 32 bit or 64 bit computer, and the limitations include max supported installed RAM = 4 GB of which 3.2 to 3.0 or less of that are available.
Please review and consider.
Thank you.
ATR

Sharepoint Designer always crashes when using the Sharepoint people/group picker in a Workflow

SharePoint designer 2013 (sp1) crashes consistently when doing the following:
Create workflow
Create email action
In the email To field select People/Groups from SharePoint site
SharePoint Designer crashed and says "Microsoft SharePoint Designer has stopped working"
This issue has been reported before in SharePoint 2010 on TechNet as a bug in the software, but with no proper resolution. I am very surprised that it is still an issue in 2013 version (sp1 which was released Feb 2014) and Microsoft have not tried
to address this.
I have read elsewhere that the fix for this is to only have a single IIS binding for the site being used (ie not have additional alternate access mappings). However this is not possible for us as we need the additional alternate access mappings.
Any help/suggestions gratefully received.
Thanks
Bill W

One way is as you mentioned try the below link
http://xblogs.kompas-xnet.si/post/SharePoint-Designer-2013-Crashing-when-using-select-peoplegroups-from-SharePoint-site.aspx
Instead of setting people picker's Return field as "As String" could you please try setting the return field as Email Address
Destin -MCPD: SharePoint Developer 2010, MCTS:SharePoint 2007 Application Development

Access refused in public folders when user is in a Group

Hi,
We have a Exchange 2003 server and an Exchange 2010 server
The Public folders are on the 2003.
Since 2 or 3 days, there is a access issue in juste ONE public folder: SOME users cannot access to the folder anymore if there are in a group (it asks for a login and a password -> if the user enters them, it doesn't work)
BUT the issue is just for some users not all and there are in the SAME group.
The issue is the same with both distribution or security group (and universal).
Please Help

Hi,
From your description, I recommend you follow the steps below for troubleshooting:
1. Please run the Get-PublicFolderAdministrativePermission -Identity "xxx" -User "xxx" cmdlet to check these users' permissions for the public folder.
2. If they don't have the related permissions, please use the Add-PublicFolderClientPermission -Identity "xxx" -AccessRights xxx -User xxx cmdlet to add the permissions for them.
For more information, here are some articles for your reference.
View Public Folder Administrative Permission Settings
http://technet.microsoft.com/en-us/library/aa998587(v=exchg.141).aspx
Add Permissions for Client Users to Access Public Folder Content
http://technet.microsoft.com/en-us/library/aa998834(v=exchg.141).aspx
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Apparently when I send to a Group of Contacts they can all see every email address and this is not acceptable how do I avoid that

I need to send to a group of about 50 parents. Their addresses are held in a Group of Contacts. I highlight the group name to distribute a message to all of them and what I am being told is that they can then all see every email address. This is not acceptable as many do not want their email address being made public in this way. Surely this should not happen or at least there should be a way to avoid it.

re: and I quote "they can then all see every email address. This is not acceptable "
I showed you the basic method of sending a group as Bcc - which is what you initially asked for.
As you now specify that not only do you want to know how to use Bcc but every email needs to be personalised - not just distributing a message to all of them, then I would agree with Matt and advise you use Mail Merge. This creates separate emails - not a bulk email to several recipients, so using a TO field will only send to that person - other people will not see other email addresses.
Matt has offered the link.
Here is some more info regarding Mail Merge.
'''How to install Add-ons:'''
download the .xpi file to your computer eg: desktop or downloads folder.
In Thunderbird
'Tools' > 'Add-ons' OR 'Menu Icon' > 'Add-ons'
click on the gear wheel icon and select 'Install addon from file'
see first image below as aid.
locate the file you downloaded and click on 'Open'
You may need to restart Thunderbird.
Mail Merge will appear in the list.
see second image below.
'''How to set up a Template emails for Mail Merge:'''
Create a Template email, which contains the 'personalised' sections.
see example - third image below.
I set the Subject as 'Mail Merge' so it is easily identifiable.
Save it as a Template email.
It will get stored in the 'Templates' folder. If you do not see a Templates folder, this is auto created when you create the first email and store as template.
'''When you want to use Mail Merge.'''
Select the Template folder.
Select the 'Mail Merge' template
either double click on the email in the list or right click on email and select 'Edit as new message'
you can then change the Subject and compose or edit the message - but do not change the sections in the curly brackets - the point of saving this as a template saves you from typing it each time.
'File ' > 'Mail Merge' (see third image)
This will open a new small window
see the fourth image below.
I would suggest you use 'Send Later' option . this will put all the emails in your Outbox, but it does allow you to check the email is correct - or do spot checks. Then you can choose to send them all in one go.
Right click on 'Outbox' folder and select 'Send unsent messages'.
Hope this info helps you.
As you are new to Thunderbird, you may or maynot have managed to locate all your toolbars.
The fifth image shows you how to enable all toolbars to make life much easier.
In addition some very useful info on maintaining a healthy Thunderbird and all about compacting- what it does and why it is important.
* http://kb.mozillazine.org/Keep_it_working_-_Thunderbird
* http://kb.mozillazine.org/Compacting_folders

Post office crashes when user sends to same group

Similar Messages

Maybe you are looking for