Post office reporting in Unknown State

We have Groupwise Monitor reporting one of our post offices in an
uknownstate. This message is not sent continuously but when we check the PO
it is running fine. This PO is being monitored remotely over T1, is there
anything we can do to correct. We have tried to set up the SMNP monitoring
for that PO only and cannot get it to work.

[email protected] wrote:
> This PO is being monitored remotely over T1
Was this PO added manually? I have found that agents I add manually will
always show unknown after a restart of Monitor, and if I delete them and
readd they start working again. If this is your issue, then there is a bug
already logged for this.
Danita Zanre
Novell Support Forums Volunteer
GroupWise 7 Upgrade Guide!
www.caledonia.net/gw7upg.html

Similar Messages

UPS transferred my package to local post office a week ago and still have not received package

I ordered a pair of headphones online and got the email saying it was shipped on April 20. I live in Buffalo and the package was shipped from Syracuse. I tracked the package on UPS and it said it transferred the package to the local post office in Buffalo on April 21.
When I checked the USPS website, it just says been 7 days and I still have not received it.
I need help in finding out where my package is. I'm wondering if it got lost in the post office since it's a pretty small package.
Should I contact Best Buy to replace my order and mail me another one? The address I'm living in is temporary and I will be moving from that address in two weeks so I'm worried about how long it will take. (I cannot have it mailed to the store to pick it up because I do not own a car and the local Best Buy store is too far for me)
Order Number: {removed per forum guidelines}
USPS Tracking Number: {removed per forum guidelines}
This is what it says on the UPS website
04/21/2015
11:48 A.M.
Package transferred to post office
Buffalo, NY, United States
04/21/2015
7:11 A.M.
Destination Scan
04/21/2015
4:16 A.M.
Arrival Scan
East Syracuse, NY, United States
04/20/2015
11:44 P.M.
Departure Scan
04/20/2015
7:49 P.M.
Origin Scan
United States
04/20/2015
4:25 P.M.
Order Processed: Ready for UPS
Tracking info from USPS
April 21, 2015
Pre-Shipment Info Sent to USPS
The U.S. Postal Service was electronically notified by the shipper on April 21, 2015 to expect your package for mailing. This does not indicate receipt by the USPS or the actual mailing date. Delivery status information will be provided if/when available.

Hello dsh,
One of the least enjoyable things about shopping online is when a shipment enters delivery limbo. I've had it happen too and it can be quite aggravating. I regret that your order seems to have gone missing and the inconvenience to you I know that entails.
Using the information you provided when you signed up for Best Buy Unboxed, I was able to review your account details. I note that you called us yesterday and that the agent with whom you spoke was able to arrange a reshipment for you.
If you have questions or concerns, please let me know. I'm grateful that you took the time to write to us!
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

Post office upset w/separate auto & non-auto postage reports for same job.

I am new to Business Objects Business Edition. I am not sure why sometimes I process an automated mailing and get one postage report showing both auto and non-auto, then run another and get two postage reports, one for auto and one for non-auto. The post office is always complaining that we shouldn't have two postage reports. Can anyone offer a suggestion?

Diane,
When the Postage Statement Type Option is set to "By Mailing" a separate Postage Statement will print for each scheme that qualified for the presort (or for each entry point in Business Edition). By Mailing is the program default.
In order to print one postage statement for the entire job, change the Postage Statement Type to By Job as follows:
1. Select Print > Reports
2. Highlight the Postage Statement
3. Click Options
4. Under Type, choose By Job
5. Click Create minimum number of pages (if it is not all ready checked)
6. To save as a default click Default
7. Click Save current settings as default
8. Click OK
9. Click OK
Note: When setting this as a default it will change this job and be the new global default for new jobs. After May 14, 2007 rate case, and using 7.80c or later, the Postage Statement may be on three pages, not just two even when doing a By Job Statement.
Diane - If you are usng Presort you can make the change to the report by opening up the postage statement block and setting the report to by job instead of by mailing.
Thanks,
Kendra
Edited by: Kendra Vangundy on Dec 10, 2008 3:36 PM

Why am I unable to access my new Post Office Account they state that you will not allow and I will have to use Internet Explorer why?

I have just opened a new account with the Post Office but I am unable to access this on the net. Telephoned Customer Services but say that I will not be able to access through Firefox and will have to use Internet Explorer. Going back to Internet Explorer is not something I want to do because I like Firefox, please explain why Firefox is blocking access if this is true. I have clicked 'allow' but it made no difference and the only message coming up is "timed-out" when I have been much less than 5 mins putting security details. Please advise. Paula

I doubt if Firefox is blocking access. More than likely, that website is made to use ActiveX, or other proprietary Microsoft code, that only Internet Explorer can handle.
If you post the address of that "Post Office" website, maybe one of us support helpers can figure out the exact reason for that.

MS Office Report, too many dimensions

Hello,
I'm trying to add some code to a program I wrote for Diode Testing. Basically I want the program to run thru the tests and then send the data to Excel automatically. I was able to use the configure MS Office report function in labview to do this, but it will only work if I use a String or a double. Neither of these works for what I'm trying to do as I have negative datapoints and have them linked to formulas. When I try to select integer and run the program it gives me an error saying "Report Generation Toolkit: You cannot use arrays with more than two dimensions.". I've spent about 2 hours looking thru my code today and cannot find any location where I have an array of Dimension 3. I've attached my code. Also note that I am only using the case 1 after the boolean for testing purposes, the other cases have code, but it needs to be changed still so can be ignored.
Any help would be greatly appreciated!,
Konrad
Attachments:
frontpanelbackup.vi ‏279 KB

Hi,
The file you attached is missing some subVIs (Instrument Control VIs?) and global variables, so I can't run your program to recreate the error. Please post your error code number, that would help in moving forward. Also have you tried placing probes? If you place probes on the input wires of all your arrays you can monitor what is passing through the wires as inputs.
Peter T
Applications Engineer
National Instruments

Save custom file name using MS Office Report Express VI

When my program creates a report, I want to save it as a serial number defined in the report. I want to use the MS Office Report Express VI to do this but unfortunately it only allows you to save the file name as a time/date and/or incremental number.
Solved!
Go to Solution.

Hi jliu317,
While waiting for you to notify the moderator to move your thread, here is my solution. (Correct me if I'm wrong)
In MS Office Report, there is a block diagram input called Path to Save Report. So this is where you can save your report in Words (.doc) or Excel (.xls) with customized filename such as serial number, as shown below.
http://zone.ni.com/reference/en-XX/help/370274G-01/lvoffice/ms_office_report/
Hope this helps.
-Ee Lim-
See that button on the left side of this post...
If you feel my post is helpful, all you need is just (at most) 2 seconds to click that button, to show your appreciation. Thank you~~

Order stuck at post office (not updating for about a week now)

I've placed an order last week ( Tales of Xillia ) and it was scheduled to be delivered last Wednesday.
The parcel has been stuck at the status "Parcel being transferred to local post office" since the 16th.
This has happened to me before once and basically, the CSR just resent the same product to me.
I was wondering if someone here could do the same in this case as well.
Thanks!

Hello karekano126,
Lost packages are the worst, aren’t they? While it certainly doesn’t happen very often, it can definitely ruin someone’s day, and I'm sorry for the disappointment this caused.
If an online order is reported to us as missing, we reach out to UPS on your behalf to start an investigation to determine where your package may be. This process may take a few days to conclude. I would hate for this to cause further frustration for you than it already has though, and I have sent you a private message so that we may discuss this further. To view it, please make sure you are logged into the forum and click on the envelope in the upper right-hand corner.
Thank you for posting,
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

MS Office Report Express VI

Hi,
I have installed Labview Report Gerneration Tool for Microsoft Office Version 1.1 and now I want to use MS Office Report Express VI but it need the VI "Dflt Data Dir.vi". I don't have this on my computer, why? Where can I get this VI? Can somebody help me?
thanks Labprog

I found this vi on my PC in the LabVIEW installation directory under
\vi.lib\Utility\file.llb. I'm attaching this llb to this posting for
the case that it is missing for some reason in your LV installation.
Please copy it to the path mentioned above.
Best regards,
Jochen Klier
National Instruments Germany
Attachments:
file.zip ‏333 KB

MS Office Report Express VI - How to programatically use multiple Path to Template

Good Afternoon,
I'm testing MS Office Report Express VI and i need to know if it's possible (and how) to programaticaly change "Path to Template" field? I need that in order to change it through front panel.
Best Regards.

Hello aj2011,
Thank you for your post on the National Instruments forum.
a solution for what you want to do is:
when you placed your express VI on the diagram, perform a right click on the express VI. From the dialog box choose "open front panel". Choose "convert". then when the front panel of the express VI is open, modify the connector of the VI and put the template path as an input.
This way you can use the express VI input path template programmatically.
Is the solution you were looking for?
Sincerely
Romain D.
Romain DUVAL || Application Engineer Specialist ||Certified LabVIEW Architect (CLA) || Certified TestStand Architect (CTA)
National Instruments France

Error -41110 with MS Office Report vi

I'm trying to use the MS Office Report express vi, and when I use an excel template with named ranges on more than one sheet I get the error "Error -41110 occurred at ex_RGT_Append Anything to Report.vi"..."Possible reasons: You specified invalid Word bookmarks or Excel named ranges." I know that the names I used are acceptible by excel, (data, high_limits, low_limits) and they work fine when on the same sheet, but I want them to be sent to separate sheets. How do I get around this error or is it a limitation with this vi?

I found a workaround:
I modified Excel_Get_Range vi in the framework libraries and added a loop to iterate through the other worksheets of the workbook until I find the named range.
Well, I guess that hacking in framework VI's is not a solution that NI would recommend (and for good reasons).
I nonetheless posted the modified VI in case someone would be curious about it.
Attachments:
Excel_Get_Range.vi ‏38 KB

GW Monitor and multiple post office agents on one Netware 6.5Server

HI,
I've not been successful getting GW Monitor (7 sp3) to recognize a PO as "known". Regardless of the setting I put in monitor.xml for the port assignment (1677), the thing reverts to port "0". This server is running a MTA only post office agent and a client post office agent. These may be related. Interestingly, the MTA IP configurations are:
MTA only post office agent:
Inbound - 165.91.107.28:7100 (My Note on this - this is from agmail MTA to agents POA which is IP ...28 and listens on 7100)
Outbound - 165.91.106.93:7101 (My Note on this - this is agents POA to agmail MTA which is ip ...93 and listens on 7101)
Client only post office agent:
Inbound - 165.91.107.28:7102 (My Note on this - this is from agents POA/MTA to agents POA only which is IP ...28 and listens on 7102)
Outbound - 165.91.106.93:7101 (My Note on this - this is agents POA only to agmail MTA which is ip ...93 and listens on 7101)
Maybe I should make the outbound for the client only post office agent to be:
Outbound - 165.91.107.28:7100
In any event, we need GW Monitor to report on the status of the POA at 1677 on the Agents server. Any ideas?
Thanks Mike

Mike Gerst wrote:
> In any event, we need GW Monitor to report on the status of the POA at
> 1677 on the Agents server. Any ideas?
Well, first of all the Monitor should be looking for 7101 for the MTA, 7100
for the first POA and 7102 for the second POA if indeed this is how you have
it set up. Are you sure you purposefully change the POA to listen on 7100
and put the MTA on 7101? That is confusing :) - most sites have the MTA at
the default of 7100, and the first POA at 7101, so it just looks weird to me
- but it's perfectly "okay" to change them if you want to - but just
confusing for long-time GW admins/consultants.
Danita
Novell Knowledge Partner
Time to upgrade to GW8!
http://www.caledonia.net/gw8upg.html

New weblogic instances goto unknown state

Hi ,
When i create a new weblogic server using Admin console , the server at time shows up in UNKNOWN State, where as normal behaviour is to show in SHUTDOWN state. have you seen or know about this kind of behaviour before? The problem with this unknown state , is once i create and change properties , i cannot able to start the server from Admin Console.
But when i restart the admin server, these new servers goto "shutdown" state, after which i could able to start the servers fine.
But i had to restart admin server everytime i create a new server , which ends up in unknown state.
im using WLS 10.3.6 version with node manager configured and jvm args are -Xmn 256m -Xmx512m respectively, let me know if you need more info on this
Thanks in advance,
Patra

Hi ,
sorry for the late response.
FlyingBird - here are my answers to your questions.
I created managed servers - Admin server is already created long back.
yes,, both startWeblogic.sh and startNodeManager.sh are started. I could able to see the node manager is reachable from admin console and node manager process has started fine on the node.
Sharmela - I dont see any error reported.
Since the new managed servers that are created , are not started up yet, ( i.e. i could not able to start them as they end up in UNKNOWN state ), they does not have the directory structure created in the linux box. so , there is no <MSX>/logs dir created so , im clues less on what is going on.
i have like more than 60 managed servers on this admin console. this issue was not there when there were less managed servers ( ~ 20 but happens everytime i create a new managed server. Not sure, what is the issue. Hard part is , i dont find any logs for it to find a direction in troubleshooting. Appreciate your advises.
Let me know if you need more info.
Regards
PatraD

Ethernet showing 'Unknown state'

I have just bought a time Capsule wanted to backup using ethernet, but my iMac wouldn't detect the capsule. I tested it with my laptop and it found it fine, so the cable and capsule aren't the problem.
I found both ethernet and firewire ports showing 'inactive'. I activated them but now they both show 'unknown state'. I have always used wireless so don't know if the ethernet was always like this.
Any help would be greatly appreciated.
Mike

I don't see where you said AirPort was OFF in the first post. And I did not mean to imply that you did not already have it connected with a Ethernet cable. Obviously, if you want it wired, there has to be a wire...
Try going to System Preferences Network pane. In the sidebar, if AirPort is listed above Ethernet, click on the little gear icon and select +Set Service Order+. Make Ethernet appear first on the list. Then try restarting.

2 gwia's 1 Post office

Hello all:
Our ISP, Verizon Business, can be unreliable at times. The T1 circuit seems to go down during heavy rain storms, before heavy rain storms, and once every 3 months.
For fault tolerance, the plan is to add another gwia to our Post Office via another ISP . We are thinking that if the first line goes down, the MX record will point to the second gwia and we should be ok for email.
We are still on GW7.03. Are there any hicups to note with this setup? Any pointers (other than moving to Unix or GW8) to offer?
Thanks

Originally Posted by EBSR_PARAMEDIC
Hello all:
Our ISP, Verizon Business, can be unreliable at times. The T1 circuit seems to go down during heavy rain storms, before heavy rain storms, and once every 3 months.
For fault tolerance, the plan is to add another gwia to our Post Office via another ISP . We are thinking that if the first line goes down, the MX record will point to the second gwia and we should be ok for email.
We are still on GW7.03. Are there any hicups to note with this setup? Any pointers (other than moving to Unix or GW8) to offer?
Thanks
It depends... Is your current GWIA on "the inside" or directly connected to the internet?
if you are NAT'ing an outside address from your providers to the GWIA, there is not a direct need to add a second GIWA. Just make sure the outside IP of you second internet connections has a NAT for the SMTP port pointing to your GIWA.
Make sure they add the second ip record to the outside MX record of your mail exchange domain, and that should be set.
You can setup your GWIA to smart relay to more than one address. Just add the two outgoing addresses (a space to separate them) on the GWIA's outbound host. That should let the GWIA use the first one until if fails and then fall back to using the second one. (As found here : Novell Documentation)
One thing to watch could be the outside IP on your second internet line and if it matches the FQDN name your GWIA is reporting. If those two don't match up according to the internet DNS records, your mail might be dropped as it is seen as possible spam attempt. So I'd advise to give the failover a good test before counting on it fully working when needed.
Cheers,
Willem

Excel Graphs using Office Report Generation

I'm using Office Report Generation and I would like to add a grpah to my excel spreadsheet using existing excel spread sheet data.
Right now the only way I can add a grpah is to load the data into labview and create a graph in a 2d array. However that way the graph has no linkage to the data in the exc el spreadsheet. I can't use a template to create the graph then load the data because different results require different methods. However if I could modify an existing graph within labview I could use the template but I can't index a now labview created graph.
Can anyone suggest anything?

Hello,
Thanks for posting to the NI Discussion Forums! I think you might
be right, and there might not be a conventional way to create your
graph from the Report Toolkit (after all this is designed more to
create a report from known and unchanging data that you can move to
excel for demo purposes). There might be some other ways to do
this.
My first recommendation if you would like to stick with the Report Gen.
VIs, you can design an Excel Macro to generate a graph from the
spreadsheet. LabVIEW can execute the Excel Macro through the
Report VIs (see the Report Generation->Excel Specific->Excel
Advanced->Excel Macros palette). There are some good examples
and documentation out there about calling Excel Macros:
http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_answer=&p_guid=B45EACE3DD2F56A4E034080020E74861&p_node=DZ53040&p_rank=&p_source=Internal&p_submitted=N
http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_answer=&p_guid=B45EACE3D9D856A4E034080020E74861&p_node=DZ53003&p_rank=&p_source=Internal&p_submitted=N
http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_answer=&p_guid=B45EACE3DC6D56A4E034080020E74861&p_node=DZ53003&p_rank=&p_source=Internal&p_submitted=N
http://zone.ni.com/reference/en-XX/manuals/323805A-01/RepGenUG_07/
If you do not want to use the macros, you might have more luck using
ActiveX, or other means in which to interface with Excel than are
provided in the Report Generation Toolkit. There are countless
examples and discussions about Excel, LabVIEW and ActiveX so I won't
spend too much time here on it, but if you think you might want to use
this as an option, let us know and I can see about finding some
examples on it for you.
Hopefully this helps! Please let us know how things go.
Travis M
LabVIEW R&D
National Instruments

Post office reporting in Unknown State

Similar Messages

Maybe you are looking for