Post parked document - Error when reading VBSEGK

Hi,
When i am trying to post an invoice in FBV0, i am getting error "Error when reading VBSEGK...." Message no. FP045
Even we couldnt able to open that dcoument. Its an invoice parked in 2008.
Please advise
Thanks,
Pavan.

Hi Pavan,
Execute program ZNOTE588384 for the incorrect document. The program corrects the entry in table VBSEC
You are using the add-on component Public Sector Management and enter deferral requests. In Customizing for the requests, you have maintained the company code variant in a way that data from the customer master is copied into the request
Good Luck
Srinivas Muthyala

Similar Messages

FBV1 Error when reading VBSEGK...." Message no. FP045

Hi,
When i am trying to post an invoice in FBV0 / FBV1, i am getting error "Error when reading VBSEGK...." Message no. FP045
Even we couldnt able to open that dcoument.
I am using ECC 5.0
Please advise
Thanks and Regards,
Swamy

Hi,
Parked documents must always have entries in BKPF (with status 'V'),
VBKPF and entries in one or more of the following tables ususally
VBSEGS/VBSEGK/VBSEGD etc. If any one of these is missing then the
document will not show.
Also, for parked documents there are no entries in BSEG.
to carry out these types of corrections by manual deletions. However
there is a way you can delete this document yourself using
the function module PRELIMINARY_POSTING_DOC_DELETE (note 63060).
This function module deleted the VBKPF, VBSEGS and VBSEGK entries and
also modified the BKPF entry to give it status 'Z' in the field
BKPF-BSTAT - which means the document is now a 'Parked document which
was deleted'.

Issue when posting parked document

Hi Expert,
when i want to post parked document, the system displayed: "Field COBL-PRODPER. does not exist in the screen SAPLKACB 0002".
Field COBL-PRODPER. does not exist in the screen SAPLKACB 0002
Message no. 00349
Diagnosis
The specified field does not exist on the screen.
Procedure
Check your batch input data.
I am not sure what is this field, i thought i did not input this data in the parked document. The parked document was input using F-02. While using FB50, the same accounts, the same document, without this issue, the parked document can be posted succeed.
what is the problem? thanks!

Hi,
Substitution is used. The document was parked using transaction FB01.
If you park a document using transaction FB01, all substitutions run- in contrast to transaction FBV1, which is simply a parking transaction. It is possible in this case to use substitution to fill fields that are not ready for input in the line item or that are not available.
When you post the parked document, the posting is made using CALL TRANSACTION. The system collects all data from the parked document and reprocesses the data for CALL TRANSACTION. A batch input runs in the background. This transfers all field contents from the parked document to the relevant screen fields. If a field that does not exist on the screen is to be filled, the system issues error message 00349. You cannot post the document.
Check your substitutions. Make sure that you never substitute fields in the parking that are not ready for input.
Rgds.

Lightroom encountered an error when reading it's preview cache

I been getting this error for over 2-3 months and thought it would go away with the new version releases, i tried all the standard fixes,deleting the catalog,compacting etc. even moving it to new folder, reinstalled the software twice. The whole nine yards. IMHO, there's a problem with the software, it may be uique with differetent type of machine setup or a corrupt file in the in the catalog and the compacting doesn't fix it.
The error always happens while in the develope and crashed, has to leave the software (sometimes it just hangs the software and you have to kill the task manually). You have at least 10-15 seconds before going back in, otherwise it will still crash, a thread is still occuring from the orginal crash and still completing it's task. That's the error, annoying as heck.
My only hoping is a new version of LR comes out soon (4.0) and it goes away, otherwise, I'm going to find something else-- driving me crazy, I spend about 10-15% of my time each week getting out and back in to make go away, then can go for a day(s) sometimes and no problems. I tried recreating the problem on specific photos where I think it might be corrupt, that doesn't give any clue, there is no pattern to this at all, it happens randomly on new photos and old photos, yet i can go back to those photos again and no problems.
Any NEW ideas would be appreciated (no compact, no new catalogs, new installs, turn off various options cache preview etc. move to new folder and more.....done that etc.).

The error is exactly what's it in the title of the post, Lightroom encountered an error when reading from its preview cache and needs to quit. That's it.
I don't know what else to tell you, i wish I had more. This is all over the internet, I followed pretty much all the solutions, delete the catalog or delete the preview folders (tried both). Tinker with the cachee preferences.   Most people kill the preview folders and the catlog gets recreated and there problem is resovled, doesn't work for me.
No cloning, totally two different catalogs (not networked etc.) a good question though.
When I am refering to catalog and cache, I strictly talking about LR only, nothing outside of that or in the operating system, just LR files only, here they are:
I have a   LR catalog folder called--->   C:\Users\Mark\Documents\LightRoom Catalog\LR_Catalog
you have another folder called: LR_Catalog Previews.lrdata   (with many subfolders underneath at)
and I have LR catalog filein C:\Users\Mark\Documents\LightRoom Catalog\LR_Catalog
LR_Catalog.LRCAT
That's it, a file and a folder with many sub-folders. I'll get a screen print with error next, but it's basically what I said earlier in the beginning, you can be in develope or even the library, and error occurs in a message box, you hit ok and the application exits. On average it can happen 6-7 times with an hour and sometimes not at all, working with same the photos. Sometimes it can happen within mintues, sometimes not at all for over 2 hours. There is no specific pattern to it.

Posting Parked Documents

Hi Gurus,
I am FM PRELIMINARY_POSTING_POST for posting parked documents.Even though FM not throwing any error but documents are not posted.Please let me know any clues how to proceed.

This is the workflow forum.

Lightroom encountered an error when reading from its preview cache. helping a friend..

Im not a lightroom user. even though I have some version 4. I use acdsee pro 6. but my friend has the 5.6 CC version but has a language issue so im trying to help me. basically will guide him over the phone.
he was editing a wedding, the computer crashed. he rebooted, lightroom came with the preview cache error. he rebooted again..same issue. he did a repair but to no avail. he tried installing an older version in parralel but no success.
what exactly does he need to do. im not a light room user. I use PS CS6 but not LR.
anybody can help to help him. I did read some posts and it noted about thumbnail previews and removing or erasing/renaming
1- where is this file located please?
2-are there many of these ? and how do I know which is the one he needs to choose?
thank you for your help.

See answer at Re: "Lightroom encountered and error when reading from its preview cache and needs to quit"

Not able to post parked document

Hello All,
I am unable to post parked documents.
I enter one credit memo from vendor vide menu FB65. I could NOT post the document. The option was greyed out. I could only park it. I parked it.
I am not able to post this parked document. I tried posting this parked document vide menu FBV0 / FBV60. The post option is not available and is greyed out.
Regards
Rao

Hi Kasturi,
On the same screen where you are trying to post the invoice type /nSU53 and take the snap shot of the screen (authorization missing objects). Send it to your SAP secutiry team or the team who gives you authorization for any transaction.
They will provide you the required access to post the invoice.
Please let me know if it helps!!
Regards.

BAPI for the T-Code FBV0 post parked document

Hello Experts,
Is there any BAPI/Fuctional module that can be used for posting parked document(t-Code FBV0).
Thanks,
Srikanth

Hi,
Go to SE37 and type ' PRELIMINARY_POSTING_* '
u'll get a few function modules.
OR
you can check in Function Group F040.
Regards,
Samson Rodrigues.

I/O device error when reading SD card of 16GB

HP Pavilion a400n on Windows XP operating system gives I.O error when reading SD card of 16GB. On Windows website I chose a hotfix for the problem (unknowing it was for VISTA), restarted the computer and had the same error. I went back to Windows update site and found hotfix for XP users. Installation said that newer version is already installed. I don't know what to do next! Help please.

Most computer people have programs that can recover/repair those sticks and I would not try to do it myself if you want the pictures but if you are a risk taker you could try to run a check disk on the card. I should be showing up as a device when you open up the computer icon. Right click on the SD card, click on properties, click on tools and then check the disk.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Validation on Post Parked Document via SAP Workflow (SAP Business Workplce)

Hi,
I have create validation rules, and I have excluded t-code type FBV0, FBV1 and FBV2 by following SAP Notes 158739 in that validation prerequisites, so when user post parked document using t-code FBV0 the validation is not carried out and it's work perfectly.
But when user try to post parked document using SAP workflow, the validation was carried out hence, user can't post the parked document. Does anyone now how to resolve this? Appreciate your advise to solve this issue. Thanks.
Regards,
Bobby

In FBV0 use document list and the try and post it
Cheers
Prakash

Error when reading Excel as a source OLE or COM processing error:

I received the following error when reading an Excel sheet directly into a target template table. Nothing fancy, but the error pops up immediately. I have found the problem and am posting the error and resolution to hopefully help others,   -rs-
692     5900     EXL-300873     8/19/2009 9:16:49 AM     |Dataflow SRC_SAPGLOBAL_ADRC_DF|Reader ADRC
692     5900     EXL-300873     8/19/2009 9:16:49 AM     OLE or COM processing error: <Unspecified error>.
692     5900     EXL-300873     8/19/2009 9:16:49 AM     |Dataflow SRC_SAPGLOBAL_ADRC_DF|Reader ADRC
692     5900     EXL-300873     8/19/2009 9:16:49 AM     OLE or COM processing error: <Operation is not allowed when the object is closed.>.
I made sure nothing had the source file open.
Stopped and re-started the job server service.
The issue was that I had Data / Filter / Auto-Filter turned ON, and saved the sheet.
I re-opened the sheet and turned off the Auto-Filter and it runs just fine.
-rs-

Hi
You and go with another approch us OdiSqlUnload package tool to transfer data from oracle table to .csv / .xls (or) txt file
Hope this may helps you.
Regards,
Phanikanth

Post parked document with display doc option instead of edit doc option

Hi SAP Guru's
Do you know if there is any tcode exist to post parked document in which user can display the document first and review it before posting it. There is a tcode FBV0 to post park document but this transaction takes you to the edit parked document(FV50) when user tries to review it. Which is the violation of SOX.
Per SOX if user has post access should not allowed to park and vise versa.
Is there any user exit for FBV0 where we can replace FV50(Edit parked doc) with FBV3(Display parked doc)? Or any other suggestion.
Thanks for any help,
Seema

Hi Priya
Stuck with FIPP Workflow. You need to do Business Object Binding from Workflow to Task. This can be done by checking the Binding of TS20000166 in Workflow Template WS20000075. Once you do that you will get a link. If you click on the link you will get the TCODE in display Mode. I was expecting some mails from you regarding queries:)))). I have now turned into a Workflow Specialist in my company )). Please reward points if useful )). I thnk this wil be very useful.
Thanks
Arghadip

Is not post parked document using workflow

Hi friends!!!!
Weu2019re using workflow for document parked through FIPP_FRAME_1 template and task Task WS10000051 delivered by SAP
The system does not post parked document parked that are processed via the workflow although they have been released, but, when we try posting it through the menus u201CDocuments > Complete" in the Tcode FBV0 the document parked is not post.
When checked in the Tcode SWIA, We´re having an endless loop
the moment we choose workflow logs option. The items keep on
repeating on a loop giving us a long scroolbar with repeated lines.
Thanks!!!!

In FBV0 use document list and the try and post it
Cheers
Prakash

Posting Parked Document

Hi experts,
While trying to post parked documents, Iam getting the following message.
"Could not determine reciepients for message type FIDCMT"
the document is not being posted.
can anyone tell me what could be the problem?
Thanking you in anticipation.
Deepak

One user created the parked document from F-65. And the approver has to post the document. From FBV0, when i enter the parked socument no, and enter, i can see the parked document, and i can channge it too. but when i select Post, its gng to normal screen, but with some message
"Could not determine receipient for message type FIDMT"
And the document status is still 'Parked'.
Do you have any idea, what could be the problem?
Thanks & regards
Deepak

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem net ti

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem next time it launches". Except that it doesn't, I keep getting the same message and the program closes. Does anyone know what I can do to repair it? Can't back up, can't do anything.

There are dozens of threads in this forum that describe the fix

Post parked document - Error when reading VBSEGK

Similar Messages

Maybe you are looking for