Post Patch Problem

After applying the patchset 3.1.1.00.09 and restarting the listeners I am unable to log into http://localhost:8080/apex
I am getting a javascript error doSubmit is not defined
I am sure I just missed something simple. Any help is appreciated.

Hello,
same problem (dosubmit/first_field/submitEnter is not defined) after upgrading apex in another machine and importing apps from 2.1.1,
but i'm getting these errors executing apxldimg.sql :
SQL> @/ORACLE/fonts_APEX_311/patch/apxldimg.sql /ORACLE/fonts_APEX_311
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1/patch/images'
new 1: create directory APEX_IMAGES as '/ORACLE/fonts_APEX_311/patch/images'
Directory created.
file not found: /css/apex_3_1.css
file not found: /ws/replace_32x24.gif
PL/SQL procedure successfully completed.
Commit complete.
timing for: Load Images
Elapsed: 00:00:01.60
Directory dropped.
Not using XML gateway.
Do you know what cause the error?
According to installation guide apxldimg is only necessary if you're using xml gateway,
is this your case?
Thanks,
Robert

Similar Messages

Oracle 8.0.5 Post Installation Problem

Hi all,
I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
However, I am running into a couple of post-installation
problems.
1. root.sh (sucessfully ran).
2. glibc patch (successfuly ran). There were a few errors on the
screen with the "mv" commands (file does not exist). Is tha
alright?
3. catrep.sql (problem). This is where I have a problem.
I ran dbstart as oracle805 (installation account), but I have no
idea whether or not I really started the database. ps -aux did
not yield any clue.
I also tried svrmgrl and "startup", but the file "initXXX.ora"
did not exist, so I copied the existing "init.ora" to
"initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log gave
me the following:
ORA-00202: controlfile: 'ora_control1'
ORA-27037: unable to obtain file status
So, in other words, I have no idea whether or not I have
successfully installed Oracle. All insights are greatly
appreciated.
Thanks a bunch...
Anh
null

Phan Anh Tran (guest) wrote:
: Hi all,
: I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
: However, I am running into a couple of post-installation
: problems.
: 1. root.sh (sucessfully ran).
: 2. glibc patch (successfuly ran). There were a few errors on
the
: screen with the "mv" commands (file does not exist). Is tha
: alright?
: 3. catrep.sql (problem). This is where I have a problem.
: I ran dbstart as oracle805 (installation account), but I have
no
: idea whether or not I really started the database. ps -aux did
: not yield any clue.
: I also tried svrmgrl and "startup", but the file "initXXX.ora"
: did not exist, so I copied the existing "init.ora" to
: "initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log
gave
: me the following:
: ORA-00202: controlfile: 'ora_control1'
: ORA-27037: unable to obtain file status
: So, in other words, I have no idea whether or not I have
: successfully installed Oracle. All insights are greatly
: appreciated.
: Thanks a bunch...
: Anh
Hei !
I also did this fault :-( See this webpage - it's excellent
and describes everything.
http://jordan.fortwayne.com/oracle/rh6x.html
null

Patches with pre and or post patch scripts not executable -- why?

In my frustration with update manager hangs I have had to kill processes and restart and even manually unjar files and patchadd. Sometimes I run across the error that the pre or post patch scripts are not executable. I have in the past chmod 744 and patchadd then applies the patch. This has happened several times in my latest patch update. I also had a patch ( X11) that implied a lack of entitlement but the manual patchadd showed that the real problem was a missing prerequisite patch.
My questions are:
1. is this lack of executable permission on scripts ( pre and post) by design and am I missing the correct procedure?
2. missing prerequisite scripts? why?
3. out of frustration --- IS THIS PATCHING UTILITY THE BEST THAT SUN CAN DO?

Update Manager is sometimes a little flaky, particularly on unpatched systems (as it uses many different utilities). I would suggest that if you are having problems then you should use smpatch instead - it's not really any more difficult to use and is often much quicker.
If a patch has a script that is not executable that is not a fault of updatemanager, but a fault with the patch itself (being archived with incorrect settings) or possibly your umask setting, which should ideally be globaly set to 0022 prior to patching to prevent problems during extraction and application.
If updatemanager has complained about a lack of entitlement I would tend to believe that this was the case, check the contents of your entitlement file:
# cat /var/sadm/spool/cache/entitlement/*entitlement_clientYou may be missing SolarisAllUpdates or other entitlements - please post the output.
Sun do offer other patching tools, but what is best for one person/company may not be the best for all. There is also the possibility that you don't have it setup correctly - I would ask that you run the attached script and upload the output file generated to our [Support Uploads|http://supportuploads.sun.com/] site.

Posted these problems of Zen Micro bef

oh man, I posted this problem before, and I'll probably get the same answer, but anyways, I'm kinda mad because my Zen Micro is having soooo many problems right now. .battery drain when not on, and no, I do not have that one fimware that has that known problem. 2. if the headphone is not in just right, the sound when seem like it's far away. 3. If I touch the top of the jack of the headphones that goes into the Micro, the music will stop playing, until I ge the jack EXACTLY in the right place. that is all the problems I have right now......but anyways, It is very annoying to recharge your Micro overnight, take it school, only to have the battery dead cuz it said overnight after it was done charging........ I'll probably get the same answer I got last time, contact creative, but I was wondering if you think the place I bouught it at would take it back, (Circuit City)i'm gettin pretty mad Creative....... I bought this hoping I wouldnt have this many problems.....Message Edited by augi55 on 08-20-2005 09:3 AM

On account of it being a headphone jack problem, of which there are many, it's quite possible they'll cover it for free even if you're beyond the warranty period (Parts: year, Labor: 90 days). Normally you'll need your receipt for proof of purchase date, but again, with the issue being a headphone jack, it may not even be required.

Post installation problems in vista 32bit

Sir
i am newbie.i installed 10gr2 in my vista,but sometimes its starting perfectly and sometimes not.Then i need to restart my machine and then only i am getting access in sql*plus.i have posted it here but the problem is still the same.[post installation problem its not solved yet|http://forums.oracle.com/forums/thread.jspa?threadID=930824&tstart=0] .
when the command maintained bellow is leaving no output at all.
emctl start dbconsoleIN the service panel is showing dbconsole status as server starting only.
what to do?
regards
Sayantan

Hans F wrote:
1) Vista is not an operating system. It is a family of operating systems. Which operating system within that family are you using?windows 7.
>
2) Oracle Database is designed to work on a server. It should have a static IP address and host name, or at least use a loopback adapter as a workaround. How is the IP address and host name on your Vista-xyz assigned?
using it for local machine in laptop.
HOST = FAXCOOLWAREZ037)(PORT = 1521)
>
Hopefully you are not using DHCP to assign the IP address, or you were sharp enough to install the loopback adapter first.

[CS4] Post login problem

Hi everybody,
I’m facing a problem I can’t solve as I’m not an expert with php : I have created a site of which first page is a login. On the second page I would like to retrieve informations from a database based on the logged on user ID. Here is the problem : I don’t know how I can insert the user ID on the SQL request (on page 2). I’ve tried to put as Run-Time value of my Recordset template $_GET[‘MM_Username’] but it does not work. Creating a session value into the bindings panel allows me to display the correct ID value (therefore MM_Username) on the HTML page but still I can’t do anything with it into my SQL request… I’m lost !
Thanks in advance for your help/advices
Best regards

Sure ! Here it is (code was generated using the server behaviors panel “Log InUser”)
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
?>
<?php
// *** Validate request to login to this site.
if (!isset($_SESSION)) {
session_start();
$loginFormAction = $_SERVER['PHP_SELF'];
if (isset($_GET['accesscheck'])) {
$_SESSION['PrevUrl'] = $_GET['accesscheck'];
if (isset($_POST['Identifiant'])) {
$loginUsername=$_POST['Identifiant'];
$password=$_POST['Password'];
$MM_fldUserAuthorization = "niveau";
$MM_redirectLoginSuccess = "Menu.php";
$MM_redirectLoginFailed = "erreur.htm";
$MM_redirecttoReferrer = false;
mysql_select_db($database_Main, $Main);
$LoginRS__query=sprintf("SELECT identifiant, passe, niveau FROM repertoire WHERE identifiant=%s AND passe=%s",
GetSQLValueString($loginUsername, "text"), GetSQLValueString($password, "text"));
$LoginRS = mysql_query($LoginRS__query, $Main) or die(mysql_error());
$loginFoundUser = mysql_num_rows($LoginRS);
if ($loginFoundUser) {
    $loginStrGroup = mysql_result($LoginRS,0,'niveau');
    //declare two session variables and assign them
    $_SESSION['MM_Username'] = $loginUsername;
    $_SESSION['MM_UserGroup'] = $loginStrGroup;
    if (isset($_SESSION['PrevUrl']) && false) {
      $MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
    header("Location: " . $MM_redirectLoginSuccess );
else {
    header("Location: ". $MM_redirectLoginFailed );
?>
De : MurraySummers [email protected]
Envoyé : vendredi 8 mars 2013 18:20
À : Berurier75
Objet : Post login problem
Re: Post login problem
created by MurraySummers <http://forums.adobe.com/people/MurraySummers> in Dreamweaver - View the full discussion <http://forums.adobe.com/message/5132803#5132803

I just posted a problem and gave you my email that i cannot get into.

#
i just posted a problem and gave you my email that i cannot get into. i have another email address for you to send an answer for me. [email protected]

What does the page say? What do you need help with?

Post patches bm39sp2 c2n vpn

Hi,
There are a lot of post patches (ikeapp.exe for example) needed on top of
bm39sp2 clients to work properly.
Why are these not officially released?
When is bm39sp3 coming out?
regards,
Marcel

Yes, unfortunately Novell never heard of planning, so it will probably be
next year ;(
regards,
John
"Craig Johnson" <[email protected]> wrote in message
news:[email protected]..
> In article <i74Cm.19260$[email protected]>, Mysterious
> wrote:
>> i expect to have a bm39sp2_ir1 patch within 2-3 weeks with all of the
>> post sp2 fixes on it
>>
> Great news!
>
> Craig Johnson
> Novell Support Connection SysOp
> *** For a current patch list, tips, handy files and books on
> BorderManager, go to http://www.craigjconsulting.com ***
>
>

Given so many posts about problems, is upgrading to maverick worth it?

Given so many posts about problems, is upgrading to OS X maverick worth it?
I am content using Snow Leopard OS X 10.6.8. But my most recent Garmin GPS map updates returned a message that stated, "Mac OSX 10.6 is an older OSX version that is no longer compatible with modern software. We will be ending support for this operating system soon. To continue using Garmin Express, please upgrade your operating system."
As others have noted, you don't hear from the users who have installed this upgrade successfully. I've read about problems installing the upgrade and then incompatibilities with other applications once it is installed. Would appreciate your experience and thoughts. Thanks.

There are several excellent suggestions here.
What I did was clone my Snow Leopard drive to a second hard drive, then installed Mavericks on the clone.
I now have a working Snow Leopard drive as well as a Mavericks drive. I bounce back and forth between them.
I have symlinks set up so all my documents created on the Mavericks drive go to the Snow Leopard drive, but I have copies of all my applications on both drives. It just seemed easier...
I had to disable App Nap in both Quickeys and Keyboard Maestro, but they both seem to work well, and neither is the latest version. (Well, Quickeys is the latest version, but it's not a recent version.)
I only check email in Snow Leopard, never in Mavericks, so my Inbox is not scattered over both systems.
The Mavericks disk takes longer to boot, and it does occasionally seem sluggish, but it's not a deal-breaker. Like many, I have some legacy software I use, so I don't want to commit to Mavericks full time. But it's nice being able to use both.
I do like using Safari in full-screen mode, but that's the only program I use full-screen for.
Hope this helps.
Andy

Post-Modification Problems: Hard Freezes. Kernel Panic?

So, I bought a used Dual 867MHz MDD back in March and it appeared to be 100% functional. It even had gone through the PSU/fan exchange program (and was still slightly loud). Comparing it to a Dual 867MHz MDD I got just a week ago, it had a different PSU, all different fans, a different heatsink, different optical drive, and a better GPU (Radeon 9000 Pro 64MB as opposed to the "new" DP867 having a GeForce 4 MX 32MB).
About two weeks ago I overclocked the system bus on the first DP867 to 167MHz, thus bringing the CPUs to 1.08GHz. No problems there. I even changed the heatsink to a copper one from a DP1.42GHz FW800 model. Again, no problems. Pre-mod I had a 4x512MB config of PC2700 Crucial DDR memory at CL2.5. I replaced those with a 2x1GB config of PC3200 Princeton DDR memory at CL2 (2-3-2-5 to be exact) that have heatspreaders. I didn't change the GPU (though I have a Radeon 9800 Pro I'm going to put in once I resolve my problems... read on...).
Pre-mod and post-mod any RAM that is PC2700 or faster is showing up as PC2600 in System Profiler, which I find very odd. That same Crucial RAM is now in the un-modded DP867 which has a 133MHz bus and it, again, shows up as PC2600. I find this odd.
When I first got the now-modded MDD, I replaced the stock 60GB IBM HDD with a Maxtor 200GB drive that has a 16MB buffer. Works fine. All this time, though, it was on the ATA66 bus. Post-mod, I moved it to the ATA100 bus and then my problems began...
The machine would boot just fine. In fact, it would boot so fast I never saw the blue OS X loading screen. Kind of freaky. Then it would HARD crash in 1-5 minutes. The only solution was to hold in the power button until the machine turned off. Putting the drive back on the ATA66 bus didn't help. Back on the ATA100 bus, I could not re-install OS X from a 10.4.3 disc I have (guy who sold me the first MDD included that and iLife '06) because it couldn't verify the hard drive. Fortunately, I had so little on the drive, I backed it up to one of the spare 60GBs by putting them both in the second MDD and using Carbon Copy Cloner (great app!).
With the Maxtor on the ATA66 bus, I could re-install OS X, so I did. I did the Archive & Install so as not to have to deal with migrating user data. First thing I noticed when it rebooted into a fresh 10.4.3 was the CPU temperature at 60°C! As far as I know, these particular PPC chips max at 62. I freaked. I shut the machine down and let it sit for several hours before booting back up and patching to 10.4.7 and re-installing the Developer tools (and patching those to Xcode 2.4). This was a problematic process, interestingly.
My system is now back to the way it was pre-mod and though it's working a lot better, it will still occassionaly hard crash/freeze. Is this a kernel panic? When I shut it down and then boot back up it tells me I can send a report to Apple, but rarely does it show me the report.
Here're the things I think could be problematic or just some possible ideas:
1. I was under the impression that the 167MHz bus would recognize PC2700 speeds, but all my fast RAM shows as PC2600, which isn't even a real speed. This worries me a bit, as slower RAM doesn't play nicely with the faster bus.
2. The Acbel PSU doesn't have enough output. I believe it's 360W max (what an odd value). I changed all the fans to be quieter (and thus slower), but the 120mm main case fan had to run off of one of the 12V power leads since it uses too much power to go off the mobo's 2-pin lead meant for said 120mm fan. I also added two 60mm behinds the heatsink which are on a fan controller (also hooked up to one of the 12V leads - I only have one HDD and one optical drive, so there're lots of leads). I also plan on putting a Radeon 9800 Pro in, but now I wonder if this PSU just can't handle the added pull from the OCed bus (and CPUs) and extra fans (not to mention slightly more power-hungry 120mm fan).
3. The PC3200 RAM's 2-3-2-5 timings don't sit well with the system. The MDDs should be able to handle both CL2 memory and a 2x1GB config according to developer documentation for them.
4. I messed up the ATA100 bus during the modding, though with nothing attached to it, I don't see why this should be an issue.
5. Repeatedly opening and closing the case has weakened the thermal paste and I need to re-attach the heatsink. I doubt this is true, but you never know.
6. The PSU is over-heating? I know they get really hot and I'm in agreement with other modders that the MDD design is not thermally officient.
7. The CPUs are overheating. Temperature Monitor, post-mod and not including the post-OS X reinstall temp reading, has yet to show these CPUs hit 60°C. They get to the mid 50's no problem, and in fact, get to the high 40s very fast (and then VERY slowly rise to the mid 50s from there). Overall, then, the system is warmer than it was pre-mod, which I find odd considering the better heatsink and extra fans.
8. These processors just aren't 100% stable at 1.08GHz. It's possible if you consider the way processors are made and why they get clocked to the speeds they get clocked to. Or...
9. The whole CPU board needs more voltage, which would require some more soldering.
Lastly, this machine seems to, since the mod, be cursed by the PowerMac G4 "No Sleep For You!" Bug. No matter how you put it to sleep or wake it up, only the fans kick in on wake-up and none of the rest of the system. Holding the power button shuts it down, and after booting it tells me I can send an error report to Apple, and again it only occassionaly shows me said report. My father has a un-modded 733MHz Digital Audio G4 that can't sleep and my un-modded Dual 867 MDD can't sleep (it wakes up, then hard crashes about 5 seconds later).
Any information would be greatly appreciated. Not to knock the fine folks at MacMod.com, but I haven't been getting the kind of feedback on all of this I was hoping for there.
Here're my machine stats (pulled from an error log):
Model: PowerMac3,6, BootROM 4.4.8f2, 2 processors, PowerPC G4 (2.1), 1.08 GHz, 2 GB
Graphics: ATI Radeon 9000 Pro, ATY,RV250, AGP, 64 MB
Memory Module: DIMM0/J21, 1 GB, DDR SDRAM, PC2600U-20320
Memory Module: DIMM1/J22, 1 GB, DDR SDRAM, PC2600U-20320
AirPort: AirPort, 9.52
Modem: Dash2, UCJ, V.92, 1.0F, APPLE VERSION 2.6.6
Network Service: AirPort, AirPort, en1
Parallel ATA Device: Maxtor 6L200R0, 189.92 GB
Parallel ATA Device: PIONEER DVD-RW DVR-106D,
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: USB-PS/2 Optical Mouse, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
Extra System Software:
Flip4Mac (latest version), Temperature Monitor (set to launch at log-in), Developer Tools (latest version).
Thanks in advance!

A few people out there have assured me that if I don't max out the system in terms of add-ons and things, the PSU should be more than adequate. I have 1x fan controller, 1x HDD, 1x optical drive, 1x graphics card in AGP slot that doesn't require an extra 12V power lead, no PCI cards, only two sticks of RAM, an overclocked system bus, and one fan hooked to a 12V lead rather than its 2-pin connection on the mobo (after discovering it doesn't run on said 2-pin connection). I've also taken out the case speaker to allow air to be pulled in through the top of the case.
I plan on adding two more fans to the fan controller (it can support 4). These fans will go at the bottom front of the case (under the face plate) and run at low speeds just to make sure the process of air flowing through the lower case starts off strong. So, two 60mm fans start it, the 120mm fan forces it past the heatsink (though as many probably know, not the whole heatsink - what a great design...), and then the two 60mm's behind the heatsink pull hot air out of the case.
Thanks for the info about System Profiler, Malcolm. I think you're right, though - if the CPUs were overheating, it would shut down. That's the whole point of the TAU's or whatever they're called.
I'm starting to think that either the 2-3-2-5 PC3200 RAM is suspect, or the processors are not stable at 1.08GHz. I'd downclock them back to 867MHz, but I think I need to buy some surface-mount resistors for that, and I really don't know what kind to get (as in, how many ohms).

Fresh install and update patch problems 119060-17 , 122213-10 , 122912-02

Just yesterday, i installed a fresh Solaris 10 x86 onto some pc hardware. After getting solaris installed and issues with my network card, i downloaded and installed the free version of the update manager 1.0.x. Next, i proceeded to update all the general patches for the solaris 10 system. I started with the command 'pprosvc -i' from a terminal. It then proceeded to download and validate a bunch of patches successfully until it hit the following 3 patches:
119060-17 ---- X11 6.6.2_x86: Xsun patch
122213-10 ---- GNOME 2.6.0_x86: GNOME Desktop Patch
122912-02 ---- SunOS 5.10_x86: Apache 1.3 Patch
All 3 failed some kind of validation and then crashed the pprosvc program, at which point it exited with the following error:
122912-02 cannot be validated
119060-17 cannot be validated
122912-02 cannot be validated
Unexpected Failure: java.lang.Throwable: ERROR: Failed to validate the digital signature(s).
I also tried to use the GUI Update Manager to update, hoping the problem was isolated to pprosvc, but that problem was also in the GUI with a similar error message:
Error occurred...The detailed error message is: Unexpected Failure: java.lang.Throwable: ERROR: Failed to validate the digitial signature(s)
Anyone know why Sun's update patch process is so troublesome?
Getting Tired of Solaris Updates...
I should mention that this is the free solaris 10 x86 install and i don't have a service contract with Sun. If this problem persists, i don't think i'll get one, as i see only further problems after buying one.
tired and confused

Hi,
There is an issue with this that is currently being investigated. There is another thread that may shed some light on what is happening here;
http://forum.sun.com/jive/forum.jspa?forumID=316
Thread title is : Sun UC, Digitally Signed Patches Using New Verisign Certificates
In the short-term please ensure that the patch mentioned in it is installed.
To quote part of mentioned thread above:
"Once the Sun Update Connection client software is upgraded with patch 121118-06 (SPARC) or 121119-06 (x86/x64) or later revisions normal behavior will resume. "
If this fails to resolve your problem, would you be kind enough to post the output of the following command for analysis please;
# showrev -p | egrep -e '121454|121119|120336|121082|121564|122232|119789'
Sincerely,
Moderator.
Message was edited by:
ForumModerator

Beehive post-Installation problem

Hi, I'm istalling Oracle Beehive 2.1.0.0 in a Oracle Linux 5.
First I installed Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production, then guided by I installed Oracle Beehive, I followed the post-installation procedures http://docs.oracle.com/cd/E16671_01/bh.200/e16641/what_you_need_to_know.htm#BIJGGFJH, in the first step (Oracle Beehive Database Post-Installation Procedures - http://docs.oracle.com/cd/E16671_01/bh.200/e16641/db_post.htm#BHAJIEID) I make correctly (at least) the first two steps, in the third one no error show but if I check configuration with the “list_bootstrap_configuration” command what I see is that the desired password is in the schema name field.
After this, I can only use some of the commands, for example with activate_configuration or list_ports I receive:
beectl: command failed. See the log file "/u01/app/beehive/product/2.0.1.0.0/beehive_1/beehive/logs/beectl/2012.06.15/beectl_shell_17_06_04+0300.txt" for more details.
Log says:
2012-06-15T15:27:30.528+03:00] [beehive] [WARNING] [] [commandline.OcsCtlException] [host: sergio.signum.com.tr] [nwaddr: 127.0.0.1] [tid: 10] [userId: oracle] [ecid: 127.0.0.1:24886:1339763249622:1,0] new-beectl-exception-instantiated-logging-automatically : (no-message-to-log)[[
oracle.ocs.commandline.BeeCtlException
at oracle.ocs.commandline.framework.ConfigurationManagerInitializer.initConfigManager(ConfigurationManagerInitializer.java:161)
at oracle.ocs.commandline.framework.ConfigurationManagerInitializer.initialize(ConfigurationManagerInitializer.java:138)
at oracle.ocs.commandline.framework.OcsCtlApplicationScope.initConfigurationManager(OcsCtlApplicationScope.java:448)
at oracle.ocs.commandline.framework.OcsCtlSession.initConfigurationManager(OcsCtlSession.java:498)
at oracle.ocs.commandline.sysmodel.ConfigurationManagerHelper.<init>(ConfigurationManagerHelper.java:101)
at oracle.ocs.commandline.sysmodel.ConfigurationManagerHelper.getInstance(ConfigurationManagerHelper.java:108)
at oracle.ocs.commandline.CommandEnv.getConfiguration(CommandEnv.java:570)
at oracle.ocs.commandline.framework.infracmds.ModifyBsp.execute(ModifyBsp.java:345)
at oracle.ocs.commandline.framework.LocalCommandExecutionEnv.execute(LocalCommandExecutionEnv.java:90)
at oracle.ocs.commandline.framework.ModeHandler.executeCommand(ModeHandler.java:525)
at oracle.ocs.commandline.framework.ShellModeHandler.executeCommandLocally(ShellModeHandler.java:205)
at oracle.ocs.commandline.framework.ShellModeHandler.access$300(ShellModeHandler.java:71)
at oracle.ocs.commandline.framework.ShellModeHandler$ProcessLine.processLine(ShellModeHandler.java:279)
at oracle.ocs.commandline.framework.ShellModeHandler$ProcessLine.access$100(ShellModeHandler.java:208)
at oracle.ocs.commandline.framework.ShellModeHandler.processCmd(ShellModeHandler.java:159)
at oracle.ocs.commandline.framework.OcsCtl.main(OcsCtl.java:174)
Caused by: oracle.ocs.core.store.exceptions.DataStoreProviderException: Unable to get Config DataSource
at oracle.ocs.framework.store.DataStoreAccessLocalFactory.getConfigDataSource(DataStoreAccessLocalFactory.java:564)
at oracle.ocs.commandline.framework.ConfigurationManagerInitializer.initConfigManager(ConfigurationManagerInitializer.java:159)
... 15 more
Caused by: java.sql.SQLException: MalConfiguration Exception.
at oracle.ocs.framework.store.OcsNonJndiBootstrapDataSource.<init>(OcsNonJndiBootstrapDataSource.java:137)
at oracle.ocs.framework.store.DataStoreAccessLocalFactory.getConfigDataSource(DataStoreAccessLocalFactory.java:561)
... 16 more
Caused by: oracle.ocs.core.store.exceptions.MalConfiguredDataStoreException: Unsupported Connect String: beehiveConn
at oracle.ocs.core.store.DbUtil.getServiceNameFromConnectString(DbUtil.java:479)
at oracle.ocs.framework.store.OcsNonJndiBootstrapDataSource.<init>(OcsNonJndiBootstrapDataSource.java:135)
... 17 more
Even if I try to clear the data given in previous steps with “clear_proposed_configuration” command I received the error.
I checked and there are 6 patches, but it seems none of them fix the problem, althought I couldn’t find from where to download. Also In the contents of the installation of Beehive, one point (out of the installation against database) it’s about installing Oracle Beekeaper, maybe that will help, but as far as I know it’s only a UI for Beehive.
(http://docs.oracle.com/cd/E16671_01/bh.200/e16649/beectl.htm#list_bootstrap_configuration here is the documentation about beectl)
Maybe the problem is that I'm installing in a 64 bits and documentation of Beehive says that only 32 bits is supported, but I needed to try because our client machine is a 64bit Linux .. any other suggestion?

for Instant Messaging, I believe you need to review Chapter 25 (Configuring XMPP) of the Installation Guide.
At least you need to do a
beectl modify_property --component _XmppService name DomainNames value <domain>
beectl activate_configuration
beectl restart --component BEEAPP_<instance>.<host>
For any user partaking in IM, you need to define an IM Address, as this is needed to provision the user to the XMPP Service.
If you master your user in an external directory, you can map existing mail addresses to also be used as IM Address, e.g.
<directory_attribute_map_entry>
<source_object>ENTERPRISE_USER</source_object>
<AttributeMap>
<Field>
<source_attribute>mail</source_attribute>
<target_attribute>BUSINESS</target_attribute>
<target_extended_attribute>IM</target_extended_attribute>
<target_attribute_type>ADDRESS</target_attribute_type>
</Field>
HTH, Thomas

New MS patch problems with Apache & SSL on NetWare web serve

This week our users began to experience problems accessing our Intranet based on a NetWare 6.5 box running Apache and using a Verisign SSL certificate. IE would say it was connecting but you would never get there. Firefox could get to the server but I had similar problems with Safari & Chrome.
I discovered that the MS security patch KB980436 had modified some portion of IE and was causing the problem. Uninstalling that patch put us back to where we could once again access our Intranet.
This seems to have something to do with how IE accesses using the SSL 443 port. When, internally, I accessed this same site using http instead of https it worked perfectly.
This patch was applied to Win XP and Win 7 with the same bad results.
If there is a more appropriate place for this post please move it there.

Have you tried the registry settings to go back to compatible mode? The
settings are listed in the MS KB article.
"boomchuck" <[email protected]> wrote in message
news:[email protected]..
>
> This week our users began to experience problems accessing our Intranet
> based on a NetWare 6.5 box running Apache and using a Verisign SSL
> certificate. IE would say it was connecting but you would never get
> there. Firefox could get to the server but I had similar problems with
> Safari & Chrome.
>
> I discovered that the MS security patch KB980436 had modified some
> portion of IE and was causing the problem. Uninstalling that patch put
> us back to where we could once again access our Intranet.
>
> This seems to have something to do with how IE accesses using the SSL
> 443 port. When, internally, I accessed this same site using http
> instead of https it worked perfectly.
>
> This patch was applied to Win XP and Win 7 with the same bad results.
>
> If there is a more appropriate place for this post please move it
> there.
>
>
> --
> boomchuck
> ------------------------------------------------------------------------
> boomchuck's Profile: http://forums.novell.com/member.php?userid=28653
> View this thread: http://forums.novell.com/showthread.php?t=418742
>

OLAP Patch problem

Hi everybody,
I had some a bad experience with OLAP Patch.
First of all it doesn't work for international users.
The problem: you have to alter (as always >:( ) the "Program
Files" dir to portuguese's "Arquivo de Programas" in
the configuration assistant. This problem is fixable...
Second, the patch configuration assistant hangs after entering
the SYS password. This problem is not (user) fixable...
Where is the problem? Is the second problem related to the former?
TIA,
Rodrigo Galvao
PS:
I'm using:
- W2K on a P4 machine
- Oracle 9.0.1 patch for 9.0.1.3.1 (# 2271678)
- I didn't installed patch #2367681

This seems to be a question for the 9i database team
please post messages directly to that forum for better reponses.
Thanks

Post Patch Errors

I'm a Sprint customer and after installing the latest patch yesterday I have run into some problems with my otherwise unflawed BB Curve.
1) Warning pops up: Application terminated: telenav address book plugin has been denied the "interprocess communication" permission.
2) My install of the Google App fails to boot. I get the error message "your device needs to be reset." I've uninstalled and reinstalled + removed batter twice (in varying orders) to no avail!
Anyone else have similar problems or have an insight into how to remedy these issues?

I am not aware of any "patches" available. There are full upgrades.
What did you do?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Post Patch Problem

Similar Messages

Maybe you are looking for