Post Payment not Clarify but on Account for payment batch
Hi,
this is FI-CA account current.
My customer processes distribution batches. The Clearing control finds the account but not an open item with same due date. Now the payment is posted for clarification.
In clarification we can set a flag to post it on account.
We would like to do this automatically during payment batch processing.
Thanks for any idea - hope I'm right here.
Regards,
Clemens
Edited by: Clemens Li on Oct 18, 2011 5:43 PM
Well,
it is more complex than expected, but now solved:
A functional guy told me that for the payment batches the posting on account was generally switched off - no way to accomplish it.
Only payments with all selection values exactly matching an open item resulted in clearing this item. Whenever a settlement run for the account had cleared open items due and a payment came later, the processing could not find the open item.
So what dis we do: We allowed posting on account generally. Now, in FI-CA exit 111, the standard IS-U creates a payment-on-account. We extended the exit, search for a cleared item with exact selection criteria. If it exists, OK, post on account. If not, we destroy the on-account information and the payment goes to clearance.
But this is very special situation for special requirements in German deregulated energy market, so probably not of much interest.
Regards,
Clemens
Similar Messages
-
Hi there,
I bought My Iphone 4s from Iran, I need to make an Apple Id but Iran is not in the registered countries?! I dont know what to choose? Also From Iran we do not have Credit card facility for payment option?!! Any idea how I can get FREE APPS on my New Phon?!!
Please let me know how I can get this sorted as soon as possible!! Thank you very muchYou can create an Apple ID without a credit card, see this article:
Create an iTunes App Store account without a credit card
Check this post about iPhones from Iran:
Re: Why Apple does not support from Iran? And why not open a store in Iran? -
Problem when change bank clearing account for payment posting.
We recently changed the bank clearing account for payment posting (program PC00_M99_PPM). But I found out because the config can only be changed but not delimited on payroll side, the program errored out when it retro back for an employee to the old clearing account. So what am I supposed to do to fix this problem?
Have anyone ever handled this problem before and could please throw some light on it?
Thanks in advance.
Johnsonhi
check following
1. Check in OMWD, whether Valuation grouping code "0001" ia ssigned to Ur plant
2. OBYC - If you have assigned GR/IR Clearing A/c to WRX then check whether you have maintained it with combination of valuation class and GL A/c
If yes then maintain only GL A/c w/o valuation class OR maintain one entry with valuation class empty and GL A/c
check following
Error in service entry sheet
Re: Error in ML81N
http://sap.ittoolbox.com/groups/technical-functional/sap-acct/grir-clearing-account-wrx-doesnt-recover-gl-account-2224137?cv=expanded
http://sap.ittoolbox.com/groups/technical-functional/sap-log-ps/problem-while-posting-service-entrysheet-in-ecc-60-version-1483547?cv=expanded#
regards
kunal -
I have redeemed points on my account but, when I try to buy a song I tunes doesnt use them it tries to access the credit card associated with the account for payment. How do I tell this thing to use the points instead. duh
By 'redeemed points' I assume that you mean that you've redeemed an iTunes gift card onto your account (?). If you do then are you trying to buy songs for yourself or are you trying to gift them - you can only gift items from a credit card, an account's balance can't be used for gifting. If you are buying for yourseflt and you are being asked to enter/verify a credit card number then are you currently in the country where your iTunes account is based ?
-
When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread. -
I can't use my apple id ,stuck at review payment there is no None option for payment
when i login it says your account is not reviewed at stores ,when i click review my account its asking for payment method i dont want to give my card details
i can't use my apple id ,stuck at review payment there is no None option for payment .Hi!
I'm stuck with similar problem.. I recently started using apple products and because I mostly use my macbook for writing, I didn't use iTunes. One day I managed to get FaceTime to chat with friends and therfore I had to create an apple id. Everything went smoothly until I tried to use iTunes Store with my iPod. iTunes asks me to review my account and although it is fully functional I cannot change any detail because I don't own a credit card, and therfore cannot get any free app!
What is funny, when it comes to creating an account through iTunes, there is an option 'None' in Credit Card section. When I try to do the same using my existing account it simply doesnt't let me do this.
I need a solution to set it properly or an option to permanently delete existing account and recreate it using iTunes. Using another email account is not an option e.g. creating another account must be done with the same email as the one I used for the current account.
I was looking for an answer but with no luck. Apple submitted great tutorials for creating accounts but didn't supply users with answers for problems like mine(which apparently is very common!).
If there is anyone from Apple reading such posts, I'd be happy to see a solution for this problem.
Thanks -
Payment not showing on bank account but paid?
Hi all, I'm new to PayPal so I'm hoping someone can help me. I purchased a few items 4 days ago and got the confirmation email of a successful payment. One item has already been shipped. However, the money has not come out of my account and there is no record of the transaction on my bank statement. I do not have a negative PayPal balance and shows that the items are "successful" or confirms or whatever it says. Any idea what's going on?
Yep When you pay someone it is never instant > paypal CREDIT that person for you (so you get your item more quickly) and then paypal take the wait for your funds to transfer to your paypal account from your bank account to pay them back. The funds can leave your bank account anytime from 2 hours - 3 days later. I paid someone 2 days ago via friends / family > they got the money but its not left my bank account....yet. ************************************* I give up my time to help you so a thank you or kudos would be cool.
Marking one of my replies as a solution would be appreciated if I sorted your problem. -
I have a valid apple account which i use to access/download apps from iTunes Store, but the iCloud is not accepting the same account, does I need something extra to access iCloud Service.
Can anyone please help me with this issue
-
Down Payment Not affecting the party Account Balance
Dear All,
When I am posting any down payment invoice (A/P or A/R) then the party account is nullified after the payment is posted against it. Now for Advance payments the down payment option is used but then the BP Account Balance does not reflect the down payment balance. How to resolve this issue with a work around. I do not preffer to use the "Payment On Acount" option.
For Example:
Advance paid to Vendor: Down Payment Invoice: Rs 10000
Outgoing Paymnet for the D/P invoice: Rs 10000
A/P Invoice raised for the Vendor: Amount Rs 4000 and adjusted with the Down Payment (Rs 4000 drawn from DP)
Now The System shows the BP Account Balance as 0 where as it should hold a debit balance of Rs 6000
Please suggest me a work around
Regards
RajHim
Inorder to keep the advance amount as debit balance,you must define control account in the BP Master Data(Under Accouting tab->General tab-Control account indicated by ...->Define a account in Downpayment payables.
Here is the differece in AP Downpayment Request and AP Downpayment Invoice
AP Downpayment Request AP Downpayment Invoice(Proforma Invoice)
-- Must be fully paid can be partially paid
-- No accounting transactions made Accounting transactins are made
-- Track the payments paid to vendors(AP) Issue & Receive invoice(Including tax) for advances paid or received
or payments mad by cusotmers(AR)
Similarities in them
--No stock postings are made
--Can be created from a base document
Now in your case as i suggested to make use of AP downpayment Request for advances.The full cycle will be as follows
1.Create PO(No acounting transactions are made)
2.Create AP Downpayment request based on the PO(No acounting transactions are made)
3.Create Outgoing payment by selecting the AP Downpayment request.
AccountingTransaction
Db-BP(Control account-Downpayment payables)
Cr-Bank account
4.Create a AP invoice
AccountingTransaction
Db-Stock
Cr-BP Account(Sundary creditors)
5.Apply downpayment request to the AP Invoice
AccountingTransaction
Db-BP Account(Sundary creditors)
Cr-BP(Control account-Downpayment payables)
Cr-Bank Account
Note:Do test the full cycle in the test database and see the results and get confirmation from the clients accounting person
Hope this method suits for your requiremet ! -
F.05 - Revaluation posting are not clearing in GL Account (Gr/Ir)
Hi Gurus,
We have FX revaluation issue. After execution of F.05 - the system performs an automatic reversal of the postings for the GRIR account on the first posting date of the new month but there is no valuation posting last posting date (month end).
So, FX revaluation is not clearing in GL Account.
Only one document posted for the first posting date of the new month and there is no posting for the month end valuation.
Please advice, on how to clear the FX entries that are currently sitting as open item in GL (Gr/IR).
ThanksHi Tejas,
Thank you for your reply. I have tried selecting various exchange rate type and was bale to post both valuation doc (for month end date) and reversal doc (for beginning of the date of next month). In F.05 posting tab tab I couldn't find "Determine Automatically" filed. So not able to find what caused for these postings. This has been done for last 4 months and now there are open items setting in GL(Gr/Ir) which needs to be cleared.
One more thing I am hearing from user is that when they run f.05 the posting cleared automatically. When I tried myself it doesn't clear the line items but post the tow line items with debit and credit. Is something I am missing here.
Please advise me on clearing the difference balances.
Thanks -
Sending email from a domain that I own (but no account for it on iPhone)
iOS 8.1.3, iPhone 6
I'd like to be able to send email from the iPhone's mail app using a FROM address of [email protected] I own mydomain.com and abc has an email account there.
But I don't want to install an account for [email protected] on the phone (it's a POP account which would involve a lot of fetching, among other reasons).
Any way to accomplish this on the iPhone?
(FYI, GMail allows this, and provides a procedure for verifying that the user actually controls the email address.)
Thanks / TomThanks, that works!
Well, not exactly. I had to fill in the outgoing server settings, but used a bad password. The iPhone reported that the account might not work properly, but it did light up DONE and I was able to save the config.
So now when I'm in an app that allows email, I can scroll through the available "FROM" settings and pick the one I need.
(I just hope this is not taking advantage of a bug in the setup dialog which Apple will close in a future release.) -
G/L account for payment terms
Hi,
Is it possible to maintain 2 G/L accounts under 1 chart of account for cash discount? For example, G/L account 333333 for payment term Z333 and G/L account 222222 for payment term Z222.
Will appreciate immediate feedback. Thanks.Hi,
Good morning and greetings,
You can use the OBBH or GGB1 option to determine the right GL account based on the payment term.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan -
Uploading blog posts when NOT using a MobileMe account
We have a student podcast/blog published to our local webserver using the "Publish to Folder" feature in iLife '08. This works fine for the podcast, but is failing for the blog. Not sure why or how to troubleshoot the problem.
tcwaters wrote:
This is a URL of file:// so that suggests to me that the files are on the server correctly, yes?
No, it means they are inside a folder on the hard disk you selected when you did the 'Publish to a folder'.
If you want your website on a Web server, you'll have to look for a company to Host your website.
You could have a look at MobileMe from Apple, it includes web space (20 Gb) among other services.
tcwaters wrote:
Within the file structure, where do the blog entries reside? I can't find the actual entries.
They are inside the folder 'the name of the blog' / folder 'Entries' / then a folder by year, then a folder by month,..
Note : Comments will only work when you publish to MobileMe as they are managed by the MobileMe server.
Kind regards, -
How do get past the credit card payment when I review my account for the 1st time?
K I've setup a account to use itunes, I even have 2 itunes gifts cards ready to go.
I'm reviewing my account for the 1st time right now.
what I want to know is:
"How do continue without entering a valid credit card payment?"Come on people. There has to be someone who can help out or what....
-
"Not possible to determine account for sales order or project stock"
Hi,
I get this error when trying to create a purchase order (type EUB). I think I should define a new account for sales order. How should I proceed?
Thanks in advance.
Luis.Hi
1) Check the spro-MM-purchasing-account assignment-Maintain account assignment categories -
Here check the account modifications against Account assignment category C,P
2) Then go to OBYC -GBB check the account maintained against the account modifier obtained in step 1
Regards
Sandeep
Maybe you are looking for
-
Income Tax Projection for Retiring Employees
Hi Folks, One of our Employee is getting retired in the month of August, As per SAP,In April-2009 his IT projection happens for the entire financial Year April to March 2010. That is his IT projection for APril to March is 5Lakhs, but his actual earn
-
How to Block / Hardening of "Unused Ports" in OracleAS-10gAS
Hi All, I have installed Oracle 10gAS PatchSet-2 9.0.4.2.0 and Windows-2000 SP-4 OS. The Both instances (INFRA & Mid-Tier) are installed on same box. My AS is working fine and all components are working great. + I can find-out the ports being used/co
-
Please Help. Has anyone else experienced this crash? I spoke to support, and they hinted that this might be a common problem.
-
Good afternoon, I am having trouble with the following things: 1. When I send a meeting request to my coworkers through iCal, only first attendee (out of five people) receives the meeting request invite. This has happened multiple times and I am not
-
Since the last update can't send mail every time I must enter my iCloud password.
I Have a iPhone 6 and a ipad 4. Since the last update only on my phone when I try to send mail a box pops up & I have to enter my iCloud password. It's very annoying. I don't have this issue on my ipad and as I said it started after the last update.