Post Problems with H67MA-E35 (B3)

Hi maybe somebody can help me with this.
I have a H67MA-E35 (B3) and start to face problems with post, no beeps no monitor signal nothing... the only way is let the PC disconected for a couple of hours or even a day and the mobo start normally but when i try to reset or turn off,,,, the motherboard dont start again no beeps or monitor signal.
I tried to update drivers and bios version but nothing helps i still having the same problem.... any ideas? i am getting crazy please help!!

Quote from: xmad on 01-August-12, 01:42:01
>>Posting Guide<<
We are going to need more information on what components are in your system.
Also, clarify does the system crash while under load or just not start?
My system components are:
CPU i3 core 3.1 ghz
HD Seagate ST500DM002 500GB SATA
MEMORY KINGSTON KVR1066D3N7K2 2GB
PSU 500W
Bios updated to latest version via LiveUpdate
Running W7 32 bits
My system don't crash under load, just dint start after reset o turn off. To start again i have to unplug the AC cable and try to start after 2 hours or more.
Tell me if you need more information.
Thanks

Similar Messages

MSI E350IA-E45 boot/post problem with some USB devices

Hi,
My new mainboard E350IA-E45 with BIOS ver. 1.4 has problems "BIOS problems" booting/posting when I connect a USB IR Receiver from CyberLink and also with a USB wireless adapter model USB-N10 from ASUS, using USB 2.0 or USB 3.0 ports.
It does the problem with one of the two devices or the two at the same time connected.
With the Logo disabled, I only see a number (not always the same) at the bottom right of the screen when I boot/reboot, and I cannot enter BIOS. If I wait a while, about half a minute Windows starts and other times not ( I'm not sure at this moment).
When this happens (not booting/posting) if I remove (while powered) these devices the motherboard posts immediately and normal operation is back !
When none is connected, it works without problems.
Does anyone have a solution or explanation for this behavior ?
Thanks in advance for any help.

Quote from: Bas on 13-October-11, 15:28:28
How can you call this explanation "working fine" ??
Your powersupply is just 75W, anything can happen with so little power.
As said before, test the board with a 300W powersupply and see if it solves it.
I bought this Mini-ITX case to have a silent HTPC, its height is 62mm, so where do I put a power supply of 300W using this case if the problem realy "is" the power adapter ! Sorry to say that, but for me it's not the power adapter.
When I BOOT it, my power meter indicates the maximum value and it's between 25-30 watts, and you say that a 75W external adapter is not enough and what about netbooks or nettops with Zacate inside with similar adapters !
Can you explain to me why or how it fails to POST in few seconds (or no POST at all) with one of these devices that has a tiny power consumption. And why it POST with a external USB HDD ! It makes no sense to me.
Anyway if there is no solution to this problem (maybe BIOS update), I don't mind very much to wait about 20 seconds until it POST with the two devices connected, because after that I have no other problems.
Best regards.

Recuring posting problem with dates

Dear experts
I would like to ask you how to deal with strange problem within recuring posting document
For recusring document I have set up for Run date 15, but when document was posted due to date was 5th not 15th. 5th is the same as posting date.
can you tell me what can causing this?
thanks a lot
KR
Peter

Hi,
The question is a bit unclear whether the recurring posting was created on 5th or 15th or you want that the date of the recurring posting could be changed.
You can refer to Note No. : 1114120 and check whether this is what you are looking for.
Kind Regards,
Jitin
SAP Business One Forum Team

Transfer Posting problem with "sales order stock type" status

Hello, i have this problem, i spend 2 days looking in the forum, but
nothing, the question is:
The SD users sell an item, and the item get the status of "sales order
stock type" in the MMBE, but at the same time, the MM user made a
trasfer posting in two steps, he take out material with transaction
MIGO, mvt 351, to another plant, but the materail was already
compromised with SD; now he cant sell the items, because he dont
realize that the material was in sales order stock type, and he already
transfer it to another plant. how can i block this? if a material in
MMBE is with "sales order stock type" status, he CANT transfer it with
351 mvt type, what config i have to make? thanks a lot!!!!
now the quantity of the unrestict use
stock is lower than the sales order, we dont want to have this issue,
thanks again
Edited by: Alex Arti on Aug 6, 2008 7:14 PM
Edited by: Alex Arti on Aug 6, 2008 7:16 PM

Hi!
Have you recently upgraded to EHP4? In this case, please, check the note 1441195. This note should solve the issue that you are reporting.
I hope this helps,
Esther.

POST problems with IIS Plugin

I am using the latest version of the IIS plugin for Weblogic (build: Apr 14 2002
17:53:13)
It seems that the ISAPI Filter (iisforward.dll) does not forward all http POSTs
- however it does seem to work fine for http GET's.
We have configured the plugin (you will see the attached debug dump) to forward
all calls on "/weblogic". If we perform http GET's on such a URL (using IE) everything
works fine - and the call is routed to Weblogic.
When we make a SOAP call using our C++ client, (a http POST) through the IIS plugin
we get a 405 error. If we artificially add the ".wlforward" extension on the context
URL (in our C++ client ) then it is forwarded correctly to weblogic by the Application
Extension (iisproxy.dll) - so the problem lies with the ISAPI filter. Also, if
we remove the ISAPI filter from IIS, we get the same 405 error - which confirms
that the ISAPI filter is not catching the POST's.
More puzzling, however, is that the SOAP requests from our Java SOAP client (using
WLS SOAP) works fine.
The problem must have something to do with the difference in structure of the
POSTS.
Normally, I would attach the logs/config in a zip file - but that seems broken
at the moment. Instead they are all pasted in below.....
-Nick
Successful POST http header:
POST /weblogic/webservice/BondInstrumentService HTTP/1.0
Host: localhost:8080
Connection: Keep-Alive
Content-Length: 1965
Content-Type: text/xml; charset=utf-8
SOAPAction: ""
Authorization: Basic c3lzdGVtOnBhc3N3b3Jk
UNSuccessful POST http header:
POST /weblogic/webservice/BondInstrumentService HTTP/1.0
SOAPAction: ""
Content-Type: text/xml
Connection: close
Content-Length: 1670
IIS 405 Response:
HTTP/1.1 405 Method not allowed
Server: Microsoft-IIS/5.0
Date: Thu, 25 Jul 2002 14:28:52 GMT
Allow: OPTIONS, TRACE, GET, HEAD
Content-Length: 3126
Content-Type: text/html
IIS Plugin Config:
Properties loaded from path: 'D:\Inetpub\WeblogicPlugin\iisproxy.ini'
Query String: '__WebLogicBridgeConfig'
General Server List:
Host: 'localhost' Port: 7001 Status: OK
ConnectRetrySecs: '2'
ConnectTimeoutSecs: '10'
CookieName: 'JSESSIONID'
Debug: '12'
DebugConfigInfo: 'ON'
DefaultFileName: ''
DynamicServerList: 'ON'
ErrorPage: ''
FileCaching: 'ON'
HungServerRecoverSecs: '300'
Idempotent: 'OFF'
KeepAliveEnabled: 'ON'
KeepAliveSecs: '30'
PathPrepend: ''
PathTrim: '/weblogic'
MaxSkips: '10'
MaxPostSize: '-1'
SecureProxy: 'OFF'
WLLogFile: 'D:\Inetpub\WeblogicPlugin\iisPlugin.log'
WLProxySSL: 'OFF'
Runtime statistics:
requests: 1
successful requests: 1
Exception objects created: 0
Exception Objects deleted: 0
URL Objects created: 1
URL Objects deleted: 1
connections recycled: 0
UNKNOWN_ERROR_CODE exceptions: 0
CONNECTION_REFUSED exceptions: 0
CONNECTION_TIMEOUT exceptions: 0
READ_ERROR exceptions: 0
WRITE_ERROR exceptions: 0
READ_TIMEOUT exceptions: 0
WRITE_TIMEOUT exceptions: 0
UNKNOWN_HOST exceptions: 0
NO_RESOURCES exceptions: 0
PROTOCOL_ERROR exceptions: 0
CONFIG_ERROR exceptions: 0
FAILOVER_REQUIRED exceptions: 0
Build date/time: Apr 14 2002 17:53:13

Doh. :< I hope you can get someone here from the BEA guys/gals to help out.
I'm outside of my league at this point. Sorry about that. Good luck.
"Nick Minutello" <[email protected]> wrote
in message news:[email protected]...
>
>
Thanks.
Sadly, my IIS configuration is correct. The plugin seems to work fine if Ijust
use my browser (http GET) for either forward-by-extension (*.jsp) orforward-by-path
(/weblogic/*).
However, there seems to be a problem when I use SOAP (http POST). For somereason,
when I use my C++ SOAP client (using WASP), then the ISAPI filter (the onethat
generates the .wlforward on the URL) doesnt modify the URL - hence the403...
If I use my java client.... everything is fine. Comparing the two httppackets,
I dont see anything obviously wrong - but something is making the WLSplugin choke.
>
Cheers,
Nick
"PHenry" <[RemoveBeforeSending][email protected]> wrote:
Howdy. I had a similar problem. I'm not a BEA support person, but maybe
I
might be able to help. If not, at least someone's listening. :>
Did you add the .jsp AND the .wlforward in the path redirection under
your
web app in IIS? I read the instructions thoroughly (or so I thought),
and I
wasn't able to get the POST to work. :< But as I reread the
instructions,
I
had put in the .jsp (is it under Home Directory, Configuration I think?),
and I put in the ISAPI dll, but I didn't put in the .wlforward (in with
the
..jsp). Once I did that, and restarted the box, all was good! :>
That might help. And if not, at least one of the BEA people have one
less
thing to try. Good luck.
"Nick Minutello" <[email protected]>
wrote
in message news:[email protected]...
I am using the latest version of the IIS plugin for Weblogic (build:Apr
14 2002
17:53:13)
It seems that the ISAPI Filter (iisforward.dll) does not forward allhttp
POSTs
- however it does seem to work fine for http GET's.
We have configured the plugin (you will see the attached debug dump)to
forward
all calls on "/weblogic". If we perform http GET's on such a URL (usingIE) everything
works fine - and the call is routed to Weblogic.
When we make a SOAP call using our C++ client, (a http POST) throughthe
IIS plugin
we get a 405 error. If we artificially add the ".wlforward" extensionon
the context
URL (in our C++ client ) then it is forwarded correctly to weblogicby the
Application
Extension (iisproxy.dll) - so the problem lies with the ISAPI filter.Also, if
we remove the ISAPI filter from IIS, we get the same 405 error -which
confirms
that the ISAPI filter is not catching the POST's.
More puzzling, however, is that the SOAP requests from our Java SOAPclient (using
WLS SOAP) works fine.
The problem must have something to do with the difference in structureof
the
POSTS.
Normally, I would attach the logs/config in a zip file - but that seemsbroken
at the moment. Instead they are all pasted in below.....
-Nick
Successful POST http header:
POST /weblogic/webservice/BondInstrumentService HTTP/1.0
Host: localhost:8080
Connection: Keep-Alive
Content-Length: 1965
Content-Type: text/xml; charset=utf-8
SOAPAction: ""
Authorization: Basic c3lzdGVtOnBhc3N3b3Jk
UNSuccessful POST http header:
POST /weblogic/webservice/BondInstrumentService HTTP/1.0
SOAPAction: ""
Content-Type: text/xml
Connection: close
Content-Length: 1670
IIS 405 Response:
HTTP/1.1 405 Method not allowed
Server: Microsoft-IIS/5.0
Date: Thu, 25 Jul 2002 14:28:52 GMT
Allow: OPTIONS, TRACE, GET, HEAD
Content-Length: 3126
Content-Type: text/html
IIS Plugin Config:
Properties loaded from path: 'D:\Inetpub\WeblogicPlugin\iisproxy.ini'
Query String: '__WebLogicBridgeConfig'
General Server List:
Host: 'localhost' Port: 7001 Status: OK
ConnectRetrySecs: '2'
ConnectTimeoutSecs: '10'
CookieName: 'JSESSIONID'
Debug: '12'
DebugConfigInfo: 'ON'
DefaultFileName: ''
DynamicServerList: 'ON'
ErrorPage: ''
FileCaching: 'ON'
HungServerRecoverSecs: '300'
Idempotent: 'OFF'
KeepAliveEnabled: 'ON'
KeepAliveSecs: '30'
PathPrepend: ''
PathTrim: '/weblogic'
MaxSkips: '10'
MaxPostSize: '-1'
SecureProxy: 'OFF'
WLLogFile: 'D:\Inetpub\WeblogicPlugin\iisPlugin.log'
WLProxySSL: 'OFF'
Runtime statistics:
requests: 1
successful requests: 1
Exception objects created: 0
Exception Objects deleted: 0
URL Objects created: 1
URL Objects deleted: 1
connections recycled: 0
UNKNOWN_ERROR_CODE exceptions: 0
CONNECTION_REFUSED exceptions: 0
CONNECTION_TIMEOUT exceptions: 0
READ_ERROR exceptions: 0
WRITE_ERROR exceptions: 0
READ_TIMEOUT exceptions: 0
WRITE_TIMEOUT exceptions: 0
UNKNOWN_HOST exceptions: 0
NO_RESOURCES exceptions: 0
PROTOCOL_ERROR exceptions: 0
CONFIG_ERROR exceptions: 0
FAILOVER_REQUIRED exceptions: 0
Build date/time: Apr 14 2002 17:53:13

Posting problems with FM Credit Memos SD-FICA Mess Class FKKFMCHK 018

Hi,
We use Funds Management FM, SD and FI-CA, in Public Sector, we are customizing credit and debit memos. Doing testing, we trying to post Credit Memos in FI-CA from SD, but actually system is giving a dump.
Initially, we could post some credit memos. Comparing records of two documents in VRBK, VBRP, VBAK, VBAP (One posted in FICA other non posted) didnu2019t find any difference. We check, by VF03 Account Determination Analysis and documents has the Revenue Accounts and Reconciliation Accounts expected.
We check OSS Note 686383, and other notes related with technical messages FKKFMCHK 018, and check customizing and G/L Accounts master records, and all items look right.
Base on Account Determination Analysis of the documents, we understand credit memo has items with financial transaction 60 (Business Partner related) and items with financial transaction 30 (Revenue Account Related) although, when we trying to post, by option Released to Accounting system gives this messages:
Error analysis
    Short text of error message:
    Posting not permitted; business transaction not recognized
    Long text of error message:
     Diagnosis
         You have posted a document that in Funds Management only has
         commitment items with financial transaction 60 but has no cleared
         item. The system cannot classify such postings by business
         transaction. Therefore, these postings are not permitted.
     System Response
     Procedure
         Change the way you post the business transaction.
     Procedure for System Administration
    Technical information about the message:
    Message class....... "FKKFMCHK"
    Number.............. 018
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
I hope some body can help me,
Best regards
Victoria Leon

Post problem with K8N Neo Platinum

I am assembling a system for a friend and it hangs according to D-Bracket2 on Processor initialization (Led 1:red, led 2:green, led 3: green led 4: red)
Specs
PSU: Codegen 350W ( 3,3V 14A
5V 30A
12V 15A )
VGA: Sapphire Radeon 9800 Pro 128MB
CPU: AMD Athlon 3000+
HDD: Seagate 7200.7 120GB in SATA1-port
DVD: MSI DR8-A DVD Burner
RAM: M-Tec 512MB DDR400
If the problem is the processor it should hang on Power On (all leds red), right?
There's some damage done to CPU fan connector so the sensor wire from the CPU fan might have no connection to the mobo. How about ESD-damage, can it cause this?
Another thing I might have done wrong is connecting front panel connectors.
I am just hoping and praying that the processor is OK and the mobo causes this.

Thanks to RacerX for answering but the problem wasn't the PSU.
Mobo caused it and I replaced it. I think it was the physical damage I mentioned in the first post. I also changed hdd from SATA1-port to SATA3-port but I don't think it matters.
Now everything works fine so +12V/15 Amps is enough.
Does the K8N Neo Platinum hang on Processor Init if it doesn't detect CPU Cooler?

Problem with BAPI_CUSTOMER_CREATEFROMDATA1 using JCo on IDES

sorry, wrong board - i opened a new post
Problem with BAPI_CUSTOMER_CREATEFROMDATA1 using JCo on IDES
Hello everyone,
we are working on a student project and would like to create customers (debtors) in an SAP IDES system.
Using the ref-customer to copy from, and some personal-data below, we get the error message
'Internal error: External no.assignment for reference customer/customer'
We also tried with BAPI_CUSTOMER_GETINTNUMBER, and ACCOUNTGROUP ZINT (New Internet Customer, others won't work?). But CREATEFROMDATA1 takes no CustomerNo created this way, nor it wants to create one 'internal'?
Any suggestions? Thanks a lot for your help,
Greetings,
Tobias Schmidbauer
          inParams = function.getImportParameterList().getStructure(
               "PI_COPYREFERENCE");
          inParams.setValue("0000001000", "REF_CUSTMR");
          inParams.setValue("1000", "SALESORG");
          inParams.setValue("10", "DISTR_CHAN");
          inParams.setValue("00", "DIVISION");
          inParams =function.getImportParameterList().getStructure(
               "PI_PERSONALDATA");
          inParams.setValue("Simpson", "LASTNAME");
          inParams.setValue("Homer", "FIRSTNAME");
          inParams.setValue("Jay","MIDDLENAME");
          inParams.setValue("Springfield", "CITY");
          inParams.setValue("DE", "LANGU_P");
          inParams.setValue("DE", "LANGUP_ISO");
          inParams.setValue("DE", "COUNTRY");
          inParams.setValue("EUR", "CURRENCY");
          inParams.setValue("12345", "POSTL_COD1");
Message was edited by: Tobias Schmidbauer

Hello Brian,
Thanks for your pointer. Actually The customer's reference number i was providing in the PI_COPYREFERENCE structure was a sold-to party customer and it uses external customer number assignment. When i used "New Internet Customer" (that doesnt use external assignment by default) as customer's account group, the customer was created successfully and assigned customer number was returned.
I want to ask now how could we give a customer number in the BAPI as i am unable to find any such column in any of the tables. (Customer number is an "out" parameter so it can only return the number of created customer). Secondly, how to chnage the external assignment property of a particular account group (like sold-to party). i.e, how could we change the account group configurations through SAP GUI??
- Umair

P45 Diamond Post Problem

Hi,
I'm starting to have another post problem with my P45 Diamond motherboard. (First one was RMA'd). This time, it's showing "Processor Initilization" with red, green, green, red. My current system is
Motherboard - MSI P45 Diamond
Bios - 1.3
Processor - Intel Q6600 (older version)
Memory - Kingston KVR1333D3N9K2/4G 4gb total 1333
Power Supply - Silverstone 750 watt
Graphics - ATI Radeon HD 3870 X2
It's been working fine for a few weeks and just started acting up. I'm using stock settings (no overclock) .
Recent changes are adding the Genie, however the post problem happened for the first time before I plugged in the Genie. The same result now occurs when the Genie is plugged in and when I remove it from the motherboard power.
Basically what happens is it will power up for the first time and it works. If I restart or shutdown and turn it back on the monitor stays blank and the status lights show Red, Green, Green, Red which is Processor Initilization. Only way to get it to boot up is hitting the Clear CMOS button or, when I went to bed and started it up this morning, it booted fine.
Any suggestions would be greatly appreciated.

Quote
The MCH voltage in Core Center we being reported at 1.976 however I NEVER changed any of the values. Is it possible that the bios "AUTO" changed the value?
The question is this value is really set to 1.976V or if it just a misreport. Please start Green Power Center and check the voltage values there.
{Remove Dual Core Center from the AUTOSTART list to make sure it does not open automatically when Windows is loaded. You can start Green Power Center independently of DCC. Just have look at the Dual Core Center Installation folder. There should be a sub-folder that contains the GPC Application. Create a shortcut to it from the Desktop and you are ready to go.}

New Start Up Problem with G4

I recently posted problems with start up not getting beyond gray screen and spinning cog device. Now having followed Mac101 ideas (thank you to Texas Mac Man) I have got further but still not in. Now the G4 loads to the blue screen and OSX box with progress bar. It goes through all stages of progress to nearly the very end. Then it stalls on "loading log in window" (or words to that effect) at the very end of the progress bar and it will go no further. I cannot seem to find anything in Mac101 to suggest where I go from here. Can anyone suggest what might be done. I should point out that if I do a Safe Boot exactly the same thing happens - it still cannot go that last step.
Any thoughts gratefully received.
Tim Rose

Here's Apple doc.#106464 too.
Try using Disk Utility to repair your startup disk (hard drive) as shown in Dr.Smokes repair thread.
Cheers!
DALE

Problems with Z68a-gd55 g3 and msi 660 gtx oc ed.

Bought the 660gtx card last week and have been pulling my hair since.. been getting the no post problem with the new card as some other ppl here I see.
from what I gather it's a bios update which is making the combo of these cards to work properly the msi liveupdate took me up to n.70 and that didn't help after reading a couple of posts here i found out about the beta updates for my bios.
Beeing a bit new when it comes to flashing I thought I'd make myself sure at what update to use.
In another post the tip was using .n88 is it still the best to use?

yes it's sandy bridge however I seem to do something wrong with the bios update. using the MSI Forum HQ USB Flashing Tool and ran it got the .n88 on there set the bios to boot from it, got a press any key to boot from usb key then it shoot directly to win logo and starts windows.
Running the usb flashing tool program again and it says I got the BIOS Version: VN.8B8 (aka Version: V23.8B8) and a restart later it reverts back to BIOS Version: VN.7 (aka Version: V23.7)
First time I shut down windows after it started and did a clearcmos.
I'm guessing I'm doing something wrong.
Might as well post my system while I'm at it.
System is:
MSI Z68A-GD55 G3
Intel core I5 1155
2x4gb Corsair DDR3 1600
MSI Geforce 660GTX 2GB Twin frozr
320GB WD Caviar
Fractal design Newton R2 650W Modular
almost forgot second time I tried I updates as before and didn't do a clearcmos just turned off the computer plugged the 660 gtx in and started this time I got 2 beeps from mainboard then nothing. then silence for a while then two beeps again until I turned off the computer put my old 250 gts back in and the bois had reverted back to VN.7 again.
without the update and the 660 gtx the update fans running hd runs a bit then nothing btw.

Strange problem with motherboard H67MA-E45(B3) =( please help

Hi, I have a strange problem with my motherboard . I have a H67MA-E45 (B3) (MSI-7678) , when i try to update it ( http://www.pcbrain.it/images/stories/msi/H67MA-E45/bios/14.JPG ) , i choose the fourth option "Select one file to update bios" , but the bios did not recognize the update file (E7678IMS.1C0) into the Usb flash drive , but if i choose the second option (select one file to boot) the file is recognized. First I made a backup of the bios, and into the USB flash drive has been created a file called "E7678ICX.162" (my current update). Why the extension is IXC ?!? it should have been IMS ! . I tried changing the file extension "E7678IMS.1C0" (the new update) into "E7678ICX.1C0" and when i select the fourth option , the file is recognized! . Obviously I have not started the update , but if I proceed with the update, changed the name of the extension, is it safe? Or do damage?..please help me :(
P.S. Sorry for my bad bad and very poor english , i'm italian =)

Quote from: HU16E on 28-September-11, 04:38:29
Manufacturer's Website info;
"KHX1333C9D3B1K2/4G 4GB 1333MHz
(2 x 2GB) CL9-9-9-27 1.5V"
Still think there is a batch conflict or possibly a bad stick in the new sticks. Might test each new stick individually for a bad one. Again, the other solution for an 8BG kit may be the new Kingston HyperX PnP's. Could you post a screenshot of CPUID's CPU-Z Memory & SPD Tab for one of the new sticks?
Added: Actually, screenshots of the old sticks Memory & SPD Tab may be of help too. It may be tRAS or tRFC differences between the two kits. Just speculation at this point though.
All the batchs works perfectly...this is the screen http://imageshack.us/f/163/ramkk.jpg/ ...save and zoom
EDIT: The old stick are SLOT #1 and SLOT #2 ...the new 3 and 4

H67MA-E35 (B3) - Freeze during every other boot with USB IR receiver plugged in.

Hi, I have an HTPC with an MSI H67MA-E35 (B3) motherboard. I also have a Hama VRC-1100 remote (Microsoft Media Center compatible), which has its own USB infrared receiver. When it's plugged in and I turn on the PC, it won't boot. It gets to the Windows boot screen and freezes before the logo itself starts to form. I have to do a hard reset, then it boots fine. If I reboot the PC, I get the same problem and have to hard reset again.
The IR receiver has the latest drivers and I've tried plugging it into different ports to no avail. I've also tried changing the BIOS settings to resume using OS instead of the BIOS, but then the remote cannot wake the PC up.

Apologies, the MSI Live Update tool says I have an MS-7680 motherboard with a B.90 BIOS. A scan for updates shows no new BIOS versions. Here are the rest of my specs:
Intel Celeron G530 (Sandy Bridge S1155)
MSI H67MA-E35 (B3)
4 GB of Kingston DDR3 1333 MHz RAM (2 sticks, running at 1066 MHz)
nVidia GT 430 with 1 GB VRAM (Asus ENGT430 DC SL/DI/1GD3, fanless)
40 GB Intel 320 Series SSD
Western Digital Green 1.5 TB HDD (WD15EARS)
Samsung BD-RE (SH-B123L/BSBP)
Antec EarthWatts EA-380D PSU
BlackGold DVB-S2/T2 Tuner (BGT3630)
Windows 7 Professional x64

H67MA-E35 USB Problem

I recently built a new system consisting of the following:
MSI H67MA-E35
Intel i5 2500k
geforce gtx 460
2x2gb of cosair DDr3 1333MHz ram
64 bit Windows 7
everything was going fine (games were working well, and no crashes) until i plugged in one of my external USB hard drives, the computer immediately rebooted and would not stop bleeping (constantly) until i unplugged the drive, it would then reboot normally. after updating all of my drivers to the latest ones and flashing the bios to the latest version the bleeping only happens if the drive is plugged in while it is booting up, when the drives are plugged in while windows is running windows says that the device connot be installed.
The USB hard drives are working fine in the 3 other computers i tried them in, also my 1gig pendrive also causes the same problem. But my USB mouse and keyboard work find and surprisingly my phone when running in USB mode (acts like a 8gig pendrive) works fine :s this problem has me stumped as i cant think of anything else to try.

tried both i get the same problem, however i did just realise the USB 3.0 ports don't seem to work, i only have 1.0 and 2.0 devices but aren't they meant to be backwards compatible?
Edit: it would seem the USB 3.0 ports do work, just not for my harddrives they don't even recognise a USB device has been plugged in with them:(
Also my USB pendrive now works fine, no idea what i did if anything but i am hoping the others just start working

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.

You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

Post Problems with H67MA-E35 (B3)

Similar Messages

Maybe you are looking for