Post Processing after Changing SID

Hi,
After following the procedure in:
Change SID
I am able to start msg_server but stuck with the follwing with Java still not starting up.
I wonder about Java instance ID, what happens with the instance ID if the above procedure is followed. I have carefully changed configurations, settings...and am able to logon on ABAP side...but Java being down I cannot release the system properly.
Please advise asto what is still missing in corelation with changing SID in such a way.
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        C7Q
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    185
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        5856
Sun May 24 13:05:07 2009
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5856) [dpxxdisp.c   1285]
     shared lib "dw_xml.dll" version 185 successfully loaded
     shared lib "dw_xtc.dll" version 185 successfully loaded
     shared lib "dw_stl.dll" version 185 successfully loaded
     shared lib "dw_gui.dll" version 185 successfully loaded
     shared lib "dw_mdm.dll" version 185 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sun May 24 13:05:11 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
DpIPCInit2: start server >UT1VC7Q01_C7Q_01                        <
DpShMCreate: sizeof(wp_adm)          59568     (1752)
DpShMCreate: sizeof(tm_adm)          58861440     (29416)
DpShMCreate: sizeof(wp_ca_adm)          80000     (80)
DpShMCreate: sizeof(appc_ca_adm)     160000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=4000/16/4416064/4416080
DpShMCreate: sizeof(comm_adm)          4416080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
DpShMCreate: sizeof(slock_adm)          156064     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=6600/16/633664/633680
DpShMCreate: sizeof(file_adm)          633680     (72)
DpShMCreate: sizeof(vmc_adm)          61520     (1864)
DpShMCreate: sizeof(wall_adm)          (416064/346352/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000F0B0050, size: 65199728)
DpShMCreate: allocated sys_adm at 000000000F0B0050
DpShMCreate: allocated wp_adm at 000000000F0B21F0
DpShMCreate: allocated tm_adm_list at 000000000F0C0AA0
DpShMCreate: allocated tm_adm at 000000000F0C0B00
DpShMCreate: allocated wp_ca_adm at 00000000128E3280
DpShMCreate: allocated appc_ca_adm at 00000000128F6B00
DpShMCreate: allocated comm_adm at 000000001291DC00
DpShMCreate: allocated slock_adm at 0000000012D53E50
DpShMCreate: allocated file_adm at 0000000012D79FF0
DpShMCreate: allocated vmc_adm_list at 0000000012E14B40
DpShMCreate: allocated gw_adm at 0000000012E14BC0
DpShMCreate: allocated vmc_adm at 0000000012E14BF0
DpShMCreate: allocated ca_info at 0000000012E23C40
DpShMCreate: allocated wall_adm at 0000000012E23C50
Sun May 24 13:05:12 2009
MBUF state OFF
DpCommInitTable: init table for 4000 entries
DpFileInitTable: init table for 6600 entries
Sun May 24 13:05:13 2009
DpSesCreateTable: created session table at 0000000018FD0050 (len=1434432)
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcInit2: o.k.
Sun May 24 13:05:14 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5088
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:05:15 2009
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1692]
***LOG Q0K=> DpMsAttach, mscon ( UT1VC7Q01) [dpxxdisp.c   12429]
DpStartStopMsg: send start message (myname is >UT1VC7Q01_C7Q_01                        <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Sun May 24 13:05:16 2009
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Sun May 24 13:05:22 2009
CCMS: Checking Downtime Configuration of Monitoring Segment.
Sun May 24 13:05:23 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 185
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:06:36 2009
MBUF state ACTIVE
Sun May 24 13:06:37 2009
DpModState: change server state from STARTING to ACTIVE
Sun May 24 13:08:31 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 104
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1619) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5088)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN

Remainder of the log:
Sun May 24 13:08:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3016
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:08:37 2009
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:08:55 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 44
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1780) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3016)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:09:15 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4904
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64998
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:09:28 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 40
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1792) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4904)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:09:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4640
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64997
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:09:36 2009
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:09:45 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 36
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1802) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4640)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:09:55 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5920
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64996
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:10:03 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 32
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1810) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5920)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:10:15 2009
J2EE server info
start = TRUE
state = STARTED
pid = 2728
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64995
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:10:23 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 28
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1816) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2728)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:10:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3192
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64994
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:10:37 2009
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:11:04 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 20
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1824) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3192)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:11:15 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4976
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64993
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:11:27 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 36
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1836) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4976)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:11:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5500
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64992
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:11:45 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 16
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1851) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5500)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:11:55 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4304
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64991
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:12:02 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 12
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1857) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4304)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:12:15 2009
DpEnvCheckJ2ee: switch off j2ee start flag
Thank you for your help and time in advance.

Similar Messages

Post processing after system copy from standalone to cluster enviornment

Hi,
I have done a system copy(Backup restore method) from a standalone quality BW (QBW) system to cluster environment (TBW).
The steps I have followed as follows.
. setup the machines in the cluster environment ( Windows 2003 EE server,sql 2005 SP3)
. Backup the current database in the source system
. Given a different SID (TBW) during the System copy installation .its a dual stack installation.
. Restore the database in the target system and select the back up restore method during the system copy database installation step.
.The installation completed successfully and i m having some doubts regarding the post processing steps after this .
We want to retain the same client in the target system ,for this i need to rename the logical name .Kindly assist me for changing the logical name for the extraction of BW delta process from extraction server to BW system and also the other steps I have to follow after system copy.
Thanks
Arun Padikkal

Hi Arun,
You should probably post this question in a basis forum.
Cheers,
Diego

Post-processing after errors in CAT5

I had few CO errors during CAT5 transfer, so financial postings were not executed. Errors were fixed in PS, but next time we run CAT5 there are no confirmation foir transfer.
The question is how it is possible to re-process or post process the transferred confirmations that are missing financial postings?
Thank you!

Hi Kabir,
Many thanks for your input. Now I would like to do something that is probably not possible.
I had a closed period, so CO postings failed. It was decided that the period will remain closed, so I want to re-process same confirmations, but with another posting date (that is in the open period). Is it possible?
Or I'd need to change the data in each time report to trigger new confirmations?
Many thanks!

Modifiable Request Status after changing SID

Hi All,
I need to change DEV Systemu2019 SID but there is some modifiable change requests (There are many records in TLock Table). DEV System is the Transport Controller.
Should all change requests be released before changing SID or System Copy process doesnu2019t related to this issue.
Is there any possibility for change request loss during this process?
Any Idea will be greatly appreciated.
Thanks in advance,
Sanaz.

Thank you for the reply.
I have done a test scenario as follows:
- SAP Fresh Installation
- Restore DEV DB
- System Copy
Now there is no record in TLOCK table.
Does it mean that I had to release all modifiable requests before this scenario?
Any idea regarding this issue will be greatly appreciated,
Sanaz.

WebEngine post processing after Export

Is it possible to have a webengine post export processing (like a trigger to a function in webengine script galleryInfo.lrweb) after the successful Export step?
I would like to do some script file copy to the album exported folder based on user selection.

If the images are smaller then you must have set something in the resize options in the export module. What are your export settings?

Post-process after the upgrade to non-Unicode

Hello all,
I'm doing a CU&UC and just completed the first part - non-Unicode.
Since it will be followed immediately by a Unicode conversion, do you really need to do all the post-upgrade tasks? And if not, which are the mandatory part?
Thanks again,
Terry

You can take the CU&UC Guide..... after upgrade and before unicode it's mandatory to do some steps, aall about unicode preparation.....after do it you can do the export....
Has you begun this????.
Regards,
Alfredo.

Best Practice Reuse - Post Processing

I have a Query Canvas that I would like to use over and over again in my different form modules. I created an object group and put the group into the object library. All of the code is located in program units.
I want some "post" processing done which differs depending on which form I am reusing it on. I first created a post_query procedure and called it as a hook, but when I use it on a form, it gets overwritten as I update the reusable object group.
I then thought I would just call my post processing after I called the query procedure, but the "post" code is executing BEFORE query code executes - which I am completely confused as to why.
So my basic question is, how do you add "hooks" or pre and post procedures to your reusable code and prevent that code from being overwritten as you update your objects?

Hi,
I also want to know what kind of monitoring scripts I can use to setup as cron jobs to monitor or detect any failure or problems?
To monitor Cluster (OS Level):
I suggest you use a powerful tool "CHM" that already comes with product Grid Infrastructure.
What do you do to configure? Nothing ... Just use.
Cluster Health Monitor (CHM) FAQ [ID 1328466.1]
See this example:
http://levipereira.wordpress.com/2011/07/19/monitoring-the-cluster-in-real-time-with-chm-cluster-health-monitor/
To monitor Database:
PERFORMANCE TUNING USING ADVISORS AND MANAGEABILITY FEATURES: AWR, ASH, and ADDM and Sql Tuning Advisor. [ID 276103.1]
The purpose of this article is to illustrate how to use the new 10g manageability features to diagnose
and resolve performance problems in the Oracle Database.
Oracle10g has powerful tools to help the DBA identify and resolve performance issues
without the hassle of analyzing complex statistical data and extensive reports.
Hope this help,
Levi Pereira
Edited by: Levi Pereira on Nov 3, 2011 11:40 PM

Preflight keeps saying "Unable to save the PDF File after post processing"

I'm at a loss how to overcome this. Spent almost a whole day, together with another person, trying to fix it with no success!
I use Adobe pro CC on a PC
I usually receive pdf files from this one client who edits and formats a book in Mac Pages. Up until a few days ago I had no problems converting the client's pdfs into pdf/x3, but the last three versions of the latest file have stumped me.
Just to test, I first just tried to convert the file (33MB), unchanged, to pdf/x3 using the save as other option - message reads "the document has been saved, however, it could not be converted according to the selected standard profile: convert to PDF/X. Please use preflight with the profile "Convert to PDF/X" in order to identify those properties of the document which prevent it from being compliant to this profile"
if I then choose under Profiles - convert to PDF/X3 - it says no problems found, and appears to have saved the file. If I try to save again as a pdf/x3, just to make sure, it then tells me it's not pdf/x3 compliant
OK - so then I go back to preflight - and choose the standards function - then pdf/x3, then continue with the default colour profile. About halfway through the conversion, at the point of saving the file, I get the message "unable to save the pdf file after post processing"
So far I've had no luck figuring out what this is.
I then choose the option of "verify compliance of ppdf/x3" - message reads "pdf/x3 version key (GTS_PDFXVersion) missing", and "Trapped key not true or false"
Help!! How can I be sure the file converted / or not?
kim

Yes I was/am aware of Preflight's inability to play nicely over cloud technologies in certain cases, especially wrt Standards technologies, this will be partially addressed in an upcoming version of Preflight without saying too much. But the same thing could theoretically have happened if the file was also located on another local network client or server. Leaving aside the argument that this may violate the Acrobat User Agreement - since purchasing the software, the user agrees to employ its functionality on a single host system and precludes host-client-based scenarios - this simply is not a supported use, meaning the user may not have expectations that it will work at all, if the applications requirements are not observed. There do exist server-solutions for Preflight files within networks, but Acrobat and by extension Acrobat Preflight is not one of those solutions, and (still) belongs in the single host-based desktop environment.
However most (99.9%) functions within Acrobat <-> acrobat.com file exchange are supported, file syncing across multiple devices will soon be supported, but Standards compliance is still admittedly a problem at this point. Some testing has been done using 3rd party cloud technologies starting with enterprise-based solutions, such as Office 365, and this will continue to ramp up to include other 3rd party products.
As for the second point, Preflight will usually change the PDF version to be complaint, are you saying that it was unable to do so in this case? It seems that this error should have popped up during the normal Preflight conversion attempt. Personally I think solving a workflow problem using the print path is a little bit of a heavy-handed approach, but if helped and the results are acceptable, then that is good. Since that path is non-existent on a Mac, as one needs to Save as Adobe PDF from the Print dialog's PDF drop-down menu, I am assuming your workflow involved file creation on a Mac, then further processing on Windows using the PDF printer. I am wondering if a simple resave/Save As... to PDF with overwrite on a Mac, or Preflighting the file using a PDF version compatibility profile before the PDF/X conversion would have helped. Since there are such a multitude of methods that a PDF can be created, there are also many ways within Acrobat that a user can shape the file to be compatible with the expected workflow, ie, 'many ways to skin a cat', without being morbid.

Will SQL Server work after changing the Machine's SID

I have a base VM which has SQL server and a SharePoint Farm, After changing the SID of the Machine Will SQL Server and SharePoint Work ?

Hello,
Changing SIDs may cause some Windows functions to fail as mentioned on the following post:
http://blogs.technet.com/b/markrussinovich/archive/2009/11/03/3291024.aspx
Tools like SysPrep that change SIDs are not supported on all SQL Server features:
http://blogs.msdn.com/b/kenkilty/archive/2013/02/22/sql-server-2012-sp1-cu2-sysprep-gotcha.aspx
http://blogs.msdn.com/b/petersad/archive/2009/12/17/sql-server-2008-r2-sysprep-step-by-step.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

OIM 11.1.1.5: Post Process Event Handler, change password notification

Hi,
Products
OIM 11.1.1.5 BP02
OAM 11.1.1.5
OID 11.1.1.5
Problem
I have written a post-process event handler which fires when a role is assigned to a user. The event handler calls a plugin which uses the UserManager API to generate and change the user's password.
I've tested this by assigning a role to the user via the OIM web console. I can see my log messages indicating that the event handler has fired and that the password has been changed.
However, I expected that when UserManager.changePassword completed, a notification email would then be sent to the user informing them of the new password, but no notification email has been sent.
The email notifications have been set up correctly, because I have changed the same user's password via the OIM web console and successfully received a Reset Password email.
So, my questions are:
1) Am I right in thinking that when you call UserManager.changePassword(), an out-of-the-box ResetPassword email notification should be sent to the user?
2) Has anyone got this working in 11.1.1.5?
Some more detailed info
In my plugin class I'm calling the following from both execute methods (EventResult and BulkEventResult):
char newpasswd[] = new RandomPasswordGeneratorImpl().generatePassword(user);
getUserManager().changePassword(userKey, newpasswd, false, null, true);
logger.info(("Successfully changed password"));
plugin.xml
     <oimplugins xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     <plugins pluginpoint="oracle.iam.platform.kernel.spi.EventHandler">
     <plugin
     pluginclass="oracle.iam.PostInsertPlugin"
     version="1.0"
     name="PostInsertPlugin">
     </plugin>
     </plugins>
     </oimplugins>
$OIM_HOME/server/bin/weblogic.properties
          wls_servername = oim_server1
          app = OIMMetadata
          metadata_from_loc=/home/oracle/eventhandlers
          metadata_file=/metadata/roleuser/custom/EventHandlers.xml
/home/oracle/eventhandlers/import/metadata/roleuser/custom/EventHandlers.xml
<?xml version='1.0' encoding='utf-8'?>
<eventhandlers
xmlns="http://www.oracle.com/schema/oim/platform/kernel"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.oracle.com/schema/oim/platform/kernel orchestration-handlers.xsd">
<action-handler
class="oracle.iam.PostInsertPlugin"
entity-type="RoleUser"
operation="CREATE"
name="PostInsertPlugin"
stage="postprocess"
order="1002"
sync="TRUE"/>
</eventhandlers>
There are no errors in the OIM out and diagnostic logs apart from the following which occur at OIM startup:
[2013-01-07T16:29:23.425+00:00] [oim_server1] [ERROR] [IAM-0080075] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 2e903d7ef060ab65:66b2de91:13c15d6d9ce:-8000-0000000000000002,0] [APP: oim#11.1.1.3.0] XML schema validation failed for XML /metadata/iam-features-OIMMigration/EventHandlers.xml and it will not be loaded by kernel.
[2013-01-07T16:29:24.267+00:00] [oim_server1] [ERROR] [IAM-0080075] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 2e903d7ef060ab65:66b2de91:13c15d6d9ce:-8000-0000000000000002,0] [APP: oim#11.1.1.3.0] XML schema validation failed for XML /metadata/iam-features-callbacks/event_configuration/EventHandlers.xml and it will not be loaded by kernel.
Thanks
dty
Edited by: oim_user on Jan 7, 2013 5:37 PM

No notification will be sent if you changepassword using the method from usermanager api.
You have to trigger the resetpassword event manullay in your code.
Here is a sample code to create an event for reset password. Once you create event, invoke it from notification service - notify method.
NotificationEvent event = new NotificationEvent();
String[] receiverUserIds= {userLogin};
event.setUserIds(receiverUserIds);
event.setTemplateName("ResetPasswordNotification");
event.setSender(null);
HashMap<String, Object> resolvedData = new HashMap<String, Object>();
resolvedData.put("userLoginId", userLogin);
event.setParams(resolvedData);

Post Processing Steps after Support Package Stack Application

I'm curious if anyone has any guidelines for post processing steps (or pre-processing) when applying Support Package Stacks to their Development Infrastructure (Developmend Workplace and the Central NWDI Server). We have just upgraded a couple of developers local engines and developer studio to SP stack 19 from SP stack 14 and are experiencing some problems. We also applied the J2EE stack and appropriate SCA files to the NWDI server.
After the support packs it looks like our DTR files are gone (when reimporting configuration via Developer Studio the SC's are there but there are no DC's inside of them). Additionally, it looks like we have to manually reimport the newest versions of SAP_BUILDT, SAP_JTECHS, and SAP-JEE. Another thing is that old Local Web Dynpro DC's are now complaining about class path problems and different versions of files. We followed the documentation for applying SP19 exactly as the documentation says for a Java Development Usage type. Is there a checklist or something that anyone has for steps to perform after the application of the support packs?

I think I'm missing something. Now I see the code and DC's inside the DTR. However, when I try to import into NWDS no DC's come in (the software components exist, but no DC's in them). Additionally, the CBS web ui reports that my software components do not contain any DC's even though I see them in the DTR. What things can I look at to determine what I'm missing here?
Thought I'd add some more info..after applying the support packs, we imported the new SAPBUILD, SAP_JTECH, and SAP_jee SCA'S into our track as we required some functionality from the newer build SCA. We also reimported our old archives back into the system by manually checking them in assuming this would fix the problem with us not seeing the source in the NWDS or the DTR. After the import, the CBS no longer sees our custom DC's, but the DTR does (both in active and inactive ws). When importing the dev configuration into the NWDS our custom DC's no longer appear, but SAP's standard SCA's do.
Message was edited by:
Eric Vota

Lumia 920 pre & post processing of pics after Ambe...

Hey folks, im starting this thread in order to grab more attention from Nokia. As they are already aware of the yellowish tint in photos since the amber update, I wanna just add something extra. I have attached 2 sample images of pictures below. Both photos were shot at ISO3200 to really show what this phone is capable of. Each picture will come with a before processing happens and after. Not only can you tell theres a yellowish tint in the post processing pics, but you can also see severe noise reduction. Sure, ISO3200 is a bit on a smartphone, but take a close look at the pics before the processing happens and tell me that isn't a amazing picture at ISO3200. White balance is spot on, and sharpness is excellent. Im sorry, but the aggressive noise reduction Nokia applies is not needed on this phone. Nokia I think most people buy these lumia 920 and 1020 phones based on cameras. I think most people can agree that while we may not ask you to remove your noise reduction settings, but rather add an option for us users who would like to skip out on the post processing that happens. You can clearly see in the before and after pics below how amazing an ISO3200 shot from this phone is.....let us have it please!!!
Attachments:
After Processing.jpg ‏3241 KB
wp_ss_20130912_0005.png ‏1705 KB

THE OTHER COMPARISON HERE:
Attachments:
After Processing (2).jpg ‏3166 KB
wp_ss_20130912_0006.png ‏1597 KB

Service Request disappears from the list of My Service Requests after changing status to In process

Service Request disappears from the list of My Service Requests after changing status to In process
Incident manager (resp.) > Agent Dashboard

Hi,
As far as I know, this is a new feedback, Please vote this customer voice, here is the link:
http://feedback.azure.com/forums/216926-service-bus/suggestions/6062851-batching-in-rest-api, or create a new voice at azure feedback forum:
http://feedback.azure.com/forums/34192--general-feedback
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Changing user for PPF - Post Processing Framework

Hello,
Is there a way to change the user for a Post Processing action once the trigger is activated?
There are times where we want a user action to kick off a PPF task, but we do not want them to have security to complete this extra task themselves. Also, the PPF task may create an activity document where we want a specific user id to be shown.
I believe the answer is no, but was wondering if anyone else out there was able to do this or had other ideas?
Thanks.
Mike

Thank you, PK!
That helped us look at our system and we do see a logical RFC connection we set up 6 years ago for workflow for when we went live. So that did help us some.
If we set up this logical connection, do you know how we can tie the ABAP RFC that we set up in BRF to use that logical connection?
Thanks.
Mike

How to delete old schedule time of process chain after changing

I am try to change the schedule time of process chain on production but after changed the old schedule is still working (i.e. every day on 7 am I want change it to 6 am only) ,one process scheduled two time.
I want only last changed. How to remove the older one?
Thanks

hmm wierd...one more thing check if this process chain get trigger by anyother process chain by some abap program or any.
Check the table rspcchain to know if it has any meta chain or not. IF not follow the below steps :
make your process chain trigger based upon the event. Follow the below step.
1.SM64 ---> Create event -
> come to your process chain -> maintain the start variant -> event base---> give that event name here.Now we will be require to create the job which will trigger this event for this.
2.Let us take the below PC as example;
ZL_TD_HCM_004 -- This PC is running after event u2018START_ZL_TD_HCM_004u2019
3.Go to T Code: SM36 Here we define the Background job which will be available in SM37 after saving it.
4.It will ask for ABAP Program to be entered. Give it as Z_START_BI_EVENT and Select Variant from the list. (Based on Process chain, you can select it)
5.Then select Start Conditions and give the start time of process chain. and select periodicity.
6.Save the newly created job in SM36.It will be now available in SM37.
This should solve your problem now .. have fingure crossed
Thanks,
Deepak
Edited by: Deepak Machal on Dec 14, 2011 8:20 AM

Post Processing after Changing SID

Similar Messages

Maybe you are looking for