Post-processing after errors in CAT5
I had few CO errors during CAT5 transfer, so financial postings were not executed. Errors were fixed in PS, but next time we run CAT5 there are no confirmation foir transfer.
The question is how it is possible to re-process or post process the transferred confirmations that are missing financial postings?
Thank you!
Hi Kabir,
Many thanks for your input. Now I would like to do something that is probably not possible.
I had a closed period, so CO postings failed. It was decided that the period will remain closed, so I want to re-process same confirmations, but with another posting date (that is in the open period). Is it possible?
Or I'd need to change the data in each time report to trigger new confirmations?
Many thanks!
Similar Messages
-
Post processing after system copy from standalone to cluster enviornment
Hi,
I have done a system copy(Backup restore method) from a standalone quality BW (QBW) system to cluster environment (TBW).
The steps I have followed as follows.
. setup the machines in the cluster environment ( Windows 2003 EE server,sql 2005 SP3)
. Backup the current database in the source system
. Given a different SID (TBW) during the System copy installation .its a dual stack installation.
. Restore the database in the target system and select the back up restore method during the system copy database installation step.
.The installation completed successfully and i m having some doubts regarding the post processing steps after this .
We want to retain the same client in the target system ,for this i need to rename the logical name .Kindly assist me for changing the logical name for the extraction of BW delta process from extraction server to BW system and also the other steps I have to follow after system copy.
Thanks
Arun PadikkalHi Arun,
You should probably post this question in a basis forum.
Cheers,
Diego -
WebEngine post processing after Export
Is it possible to have a webengine post export processing (like a trigger to a function in webengine script galleryInfo.lrweb) after the successful Export step?
I would like to do some script file copy to the album exported folder based on user selection.If the images are smaller then you must have set something in the resize options in the export module. What are your export settings?
-
Post-process after the upgrade to non-Unicode
Hello all,
I'm doing a CU&UC and just completed the first part - non-Unicode.
Since it will be followed immediately by a Unicode conversion, do you really need to do all the post-upgrade tasks? And if not, which are the mandatory part?
Thanks again,
TerryYou can take the CU&UC Guide..... after upgrade and before unicode it's mandatory to do some steps, aall about unicode preparation.....after do it you can do the export....
Has you begun this????.
Regards,
Alfredo. -
Post Processing after Changing SID
Hi,
After following the procedure in:
Change SID
I am able to start msg_server but stuck with the follwing with Java still not starting up.
I wonder about Java instance ID, what happens with the instance ID if the above procedure is followed. I have carefully changed configurations, settings...and am able to logon on ABAP side...but Java being down I cannot release the system properly.
Please advise asto what is still missing in corelation with changing SID in such a way.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid C7Q
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 185
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 5856
Sun May 24 13:05:07 2009
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5856) [dpxxdisp.c 1285]
shared lib "dw_xml.dll" version 185 successfully loaded
shared lib "dw_xtc.dll" version 185 successfully loaded
shared lib "dw_stl.dll" version 185 successfully loaded
shared lib "dw_gui.dll" version 185 successfully loaded
shared lib "dw_mdm.dll" version 185 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sun May 24 13:05:11 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
DpIPCInit2: start server >UT1VC7Q01_C7Q_01 <
DpShMCreate: sizeof(wp_adm) 59568 (1752)
DpShMCreate: sizeof(tm_adm) 58861440 (29416)
DpShMCreate: sizeof(wp_ca_adm) 80000 (80)
DpShMCreate: sizeof(appc_ca_adm) 160000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=4000/16/4416064/4416080
DpShMCreate: sizeof(comm_adm) 4416080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
DpShMCreate: sizeof(slock_adm) 156064 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=6600/16/633664/633680
DpShMCreate: sizeof(file_adm) 633680 (72)
DpShMCreate: sizeof(vmc_adm) 61520 (1864)
DpShMCreate: sizeof(wall_adm) (416064/346352/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F0B0050, size: 65199728)
DpShMCreate: allocated sys_adm at 000000000F0B0050
DpShMCreate: allocated wp_adm at 000000000F0B21F0
DpShMCreate: allocated tm_adm_list at 000000000F0C0AA0
DpShMCreate: allocated tm_adm at 000000000F0C0B00
DpShMCreate: allocated wp_ca_adm at 00000000128E3280
DpShMCreate: allocated appc_ca_adm at 00000000128F6B00
DpShMCreate: allocated comm_adm at 000000001291DC00
DpShMCreate: allocated slock_adm at 0000000012D53E50
DpShMCreate: allocated file_adm at 0000000012D79FF0
DpShMCreate: allocated vmc_adm_list at 0000000012E14B40
DpShMCreate: allocated gw_adm at 0000000012E14BC0
DpShMCreate: allocated vmc_adm at 0000000012E14BF0
DpShMCreate: allocated ca_info at 0000000012E23C40
DpShMCreate: allocated wall_adm at 0000000012E23C50
Sun May 24 13:05:12 2009
MBUF state OFF
DpCommInitTable: init table for 4000 entries
DpFileInitTable: init table for 6600 entries
Sun May 24 13:05:13 2009
DpSesCreateTable: created session table at 0000000018FD0050 (len=1434432)
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcInit2: o.k.
Sun May 24 13:05:14 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5088
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:05:15 2009
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1692]
***LOG Q0K=> DpMsAttach, mscon ( UT1VC7Q01) [dpxxdisp.c 12429]
DpStartStopMsg: send start message (myname is >UT1VC7Q01_C7Q_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Sun May 24 13:05:16 2009
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Sun May 24 13:05:22 2009
CCMS: Checking Downtime Configuration of Monitoring Segment.
Sun May 24 13:05:23 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 185
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:06:36 2009
MBUF state ACTIVE
Sun May 24 13:06:37 2009
DpModState: change server state from STARTING to ACTIVE
Sun May 24 13:08:31 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 104
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1619) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5088)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWNRemainder of the log:
Sun May 24 13:08:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3016
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:08:37 2009
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:08:55 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 44
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1780) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3016)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:09:15 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4904
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64998
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:09:28 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 40
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1792) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4904)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:09:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4640
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64997
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:09:36 2009
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:09:45 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 36
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1802) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4640)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:09:55 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5920
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64996
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:10:03 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 32
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1810) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5920)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:10:15 2009
J2EE server info
start = TRUE
state = STARTED
pid = 2728
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64995
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:10:23 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 28
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1816) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2728)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:10:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3192
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64994
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:10:37 2009
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:11:04 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 20
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1824) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3192)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:11:15 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4976
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64993
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:11:27 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 36
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1836) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4976)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:11:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5500
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64992
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:11:45 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 16
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1851) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5500)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:11:55 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4304
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64991
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:12:02 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 12
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1857) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4304)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:12:15 2009
DpEnvCheckJ2ee: switch off j2ee start flag
Thank you for your help and time in advance. -
Hi sapients,
i am not able to edit the datas when i am doing cogi tranxn Kindly pour some light on this topic.
regards,
venkatDear
Goto COGI -Enter the details (like Movement Type , Production Order as per your requirement ) -Hit execute button -It will display the Error like Posting perods , Storage Loaction , batch nuber is missed etc .,
Now select that error line item -Select the "Goto" option in the header -Slect Change detail from the menu -Input what ever required based on the errros like Storage loaction , batch , posting periods etc
Hope it solve
Regards
JH -
Error in Database Load (post processing)
Hi, i have a problem when install the Database Instance. In the step "Database Load (post processing)". Error:
ERROR 2007-01-16 18:33:23
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:33:53
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:34:23
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:34:53
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:35:23
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:35:53
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:35:54
FJS-00012 Error when executing script.
And I want to open the file SAPVIEW.log for check the error, but the file size is 300Mb.
Help me, please.
Jonu00E1300 MB? are u sure? this is way too much imho...as i see you install sqlsrv (= win)...you can find a tail like tool for windows under http://tailforwin32.sourceforge.net ... but somehow i doubt you will succeed to load the file...
-> which sap rlz you're installing?
GreetZ, AH -
I am a new user to the Photoshop CC 2014. I am unable to save images post processing. Error given is "Unable to save image Write access not granted". Can some one please help me with this.
I am using Mac OS Yosemite Version 10.10.2
Regds
ShashiIn a finder window highlight and right click the folder you are trying to save to and select Get Info. In the window that opens look at the bottom to see if you have Read/Write permissions. If you don't click the Plus sign and add your Admin Username to the list and give it full Read/Write permissions.
Open Disk Utility and on the First Aid tab select Repair Permissions and let it run. -
Database instance install error in database load (post processing)
hi
i'm facing these errors during the ECC installation the operating system is Windows 2003 server database is oracle 9.2.
Error occured in database load (post processing) step
ERROR 2009-12-19 01:23:50
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPCLUST.log
ERROR 2009-12-19 01:49:20
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.log
ERROR 2009-12-19 04:08:20
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.logHi
(RFF) ERROR: invalid checksum in data file "E:/DVD2/EXPORT2/DATA/SAPCLUST.001";
current table was "EDI40"
Your install software is corrupt....
Did you copy the software to disk ? If so did you copy accross in binary mode ...
Mark -
Best Practice Reuse - Post Processing
I have a Query Canvas that I would like to use over and over again in my different form modules. I created an object group and put the group into the object library. All of the code is located in program units.
I want some "post" processing done which differs depending on which form I am reusing it on. I first created a post_query procedure and called it as a hook, but when I use it on a form, it gets overwritten as I update the reusable object group.
I then thought I would just call my post processing after I called the query procedure, but the "post" code is executing BEFORE query code executes - which I am completely confused as to why.
So my basic question is, how do you add "hooks" or pre and post procedures to your reusable code and prevent that code from being overwritten as you update your objects?Hi,
I also want to know what kind of monitoring scripts I can use to setup as cron jobs to monitor or detect any failure or problems?
To monitor Cluster (OS Level):
I suggest you use a powerful tool "CHM" that already comes with product Grid Infrastructure.
What do you do to configure? Nothing ... Just use.
Cluster Health Monitor (CHM) FAQ [ID 1328466.1]
See this example:
http://levipereira.wordpress.com/2011/07/19/monitoring-the-cluster-in-real-time-with-chm-cluster-health-monitor/
To monitor Database:
PERFORMANCE TUNING USING ADVISORS AND MANAGEABILITY FEATURES: AWR, ASH, and ADDM and Sql Tuning Advisor. [ID 276103.1]
The purpose of this article is to illustrate how to use the new 10g manageability features to diagnose
and resolve performance problems in the Oracle Database.
Oracle10g has powerful tools to help the DBA identify and resolve performance issues
without the hassle of analyzing complex statistical data and extensive reports.
Hope this help,
Levi Pereira
Edited by: Levi Pereira on Nov 3, 2011 11:40 PM -
Dear All,
In the CIF post processing, either via CIF Cockpit or via other post processing transactions, in APO or ECC, we need to go into each post processing record to find the reason for the post processing record being created and to check the status for Error / Warning.
Is there a way to view all the post processing records at APO or ECC system level?
Is there any method to analyze the reason for the post processing records, other than going into each one of them to find out?
I saw in the web of the existence of a program, where on adding some simple coding to the program, a report can be created to view the 'reason for post processing record' being created.
Regards,
Sridhar RHi Senthil,
Thanks for the reply.
The alerts system is already in place.
We are looking at a report where on execution, it would give the reason for the post processing record / error creation.
Based on the report corrective action could be taken, by appropriately notifying the respective teams / users in corresponding plants / regions.
Regards,
Sridhar R -
Sql upgrade 2000 to 2005 post processing error
Dear People,
I have successfully upgraded sql from 2000 to 2005 and im doing the post processing steps for upgrade using the sql tool and im getting error at the step " creare sap stored procedure" .im pasting the error messages below.
<b>dev_w0</b>
RROR: schema user dcb has administrator fixed server role (user_name() is 'dbo').
C This is not allowed. Please check the Server Roles of user dcb.
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
sapinst_dev.log<b></b>
ERROR 2007-12-04 10:54:48.62 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step ExeProcs with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysCopy|ind|ind|ind|ind|4|0|MssProcs|ind|ind|ind|ind|4|0|ExeProcs was executed with status ERROR .
ERROR 2007-12-04 10:54:48.62
lib=iamodmssql module=CIaNtMssDmo
MDB-05053 Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]SELECT permission denied on object 'MSSSOURCE', database 'DCB', schema 'dcb'.
<p> SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.</p>
regards
rajhi siddesh,
i also get the following errors in sql,this could be the main reason
1.Msg 15157, Level 16, State 1, Line 1
Setuser failed because of one of the following reasons: the database principal 'dcb' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
Msg 229, Level 14, State 5, Procedure sap_droproc, Line 56
SELECT permission denied on object 'sysobjects', database 'mssqlsystemresource', schema 'sys'.
Msg 229, Level 14, State 5, Procedure sap_droproc, Line 60
SELECT permission denied on object 'sysobjects', database 'mssqlsystemresource', schema 'sys'.
Msg 208, Level 16, State 0, Procedure sap_droproc, Line 65
Invalid object name '#allnames
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid DCB
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, ASCII, optimized
pid 3236
Wed Dec 05 12:07:00 2007
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3236) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 111 successfully loaded
shared lib "dw_xtc.dll" version 111 successfully loaded
shared lib "dw_stl.dll" version 111 successfully loaded
shared lib "dw_gui.dll" version 111 successfully loaded
shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Dec 05 12:07:04 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >voyager_DCB_00 <
DpShMCreate: sizeof(wp_adm) 11808 (908)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05CB0040, size: 4232896)
DpShMCreate: allocated sys_adm at 05CB0040
DpShMCreate: allocated wp_adm at 05CB1B30
DpShMCreate: allocated tm_adm_list at 05CB4950
DpShMCreate: allocated tm_adm at 05CB4980
DpShMCreate: allocated wp_ca_adm at 06024C10
DpShMCreate: allocated appc_ca_adm at 06029260
DpShMCreate: allocated comm_adm at 0602A9D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 060AB880
DpShMCreate: allocated gw_adm at 060AB8C0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 060AB8F0
DpShMCreate: allocated wall_adm at 060AB8F8
Wed Dec 05 12:07:05 2007
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( voyager) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >voyager_DCB_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Wed Dec 05 12:07:45 2007
ERROR => W0 (pid 2840) died [dpxxdisp.c 14441]
ERROR => W1 (pid 2844) died [dpxxdisp.c 14441]
ERROR => W2 (pid 1904) died [dpxxdisp.c 14441]
ERROR => W3 (pid 3308) died [dpxxdisp.c 14441]
ERROR => W4 (pid 4056) died [dpxxdisp.c 14441]
ERROR => W5 (pid 4088) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 1244) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2888) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2932) died [dpxxdisp.c 14441]
ERROR => W9 (pid 2892) died [dpxxdisp.c 14441]
ERROR => W10 (pid 3116) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2096) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 2480) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:07:55 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Dec 05 12:07:55 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2840 Ended no 1 0 0
1 DIA 2844 Ended no 1 0 0
2 DIA 1904 Ended no 1 0 0
3 DIA 3308 Ended no 1 0 0
4 DIA 4056 Ended no 1 0 0
5 DIA 4088 Ended no 1 0 0
6 UPD 1244 Ended no 1 0 0
7 ENQ 2888 Ended no 1 0 0
8 BTC 2932 Ended no 1 0 0
9 BTC 2892 Ended no 1 0 0
10 BTC 3116 Ended no 1 0 0
11 SPO 2096 Ended no 1 0 0
12 UP2 2480 Ended no 1 0 0
Dispatcher Queue Statistics Wed Dec 05 12:07:55 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Wed Dec 05 12:07:55 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Dec 05 12:07:55 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:00 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >voyager_DCB_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1680) (SOFT_KILL)
Stop icman
killing process (2612) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1680 HANDLE:1608)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1680 HANDLE:1608)
wait for end of icman
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:10 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2612 HANDLE:1612)
DpStartStopMsg: send stop message (myname is >voyager_DCB_00 <)
NiIMyHostName: hostname = 'voyager'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Dec 05 12:08:13 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12099]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1548 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1548 (pos=2)
SiSelNRemove: removed sock 1548
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1548
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3236) [dpxxdisp.c 10371]
Good Bye ..... -
Preflight keeps saying "Unable to save the PDF File after post processing"
I'm at a loss how to overcome this. Spent almost a whole day, together with another person, trying to fix it with no success!
I use Adobe pro CC on a PC
I usually receive pdf files from this one client who edits and formats a book in Mac Pages. Up until a few days ago I had no problems converting the client's pdfs into pdf/x3, but the last three versions of the latest file have stumped me.
Just to test, I first just tried to convert the file (33MB), unchanged, to pdf/x3 using the save as other option - message reads "the document has been saved, however, it could not be converted according to the selected standard profile: convert to PDF/X. Please use preflight with the profile "Convert to PDF/X" in order to identify those properties of the document which prevent it from being compliant to this profile"
if I then choose under Profiles - convert to PDF/X3 - it says no problems found, and appears to have saved the file. If I try to save again as a pdf/x3, just to make sure, it then tells me it's not pdf/x3 compliant
OK - so then I go back to preflight - and choose the standards function - then pdf/x3, then continue with the default colour profile. About halfway through the conversion, at the point of saving the file, I get the message "unable to save the pdf file after post processing"
So far I've had no luck figuring out what this is.
I then choose the option of "verify compliance of ppdf/x3" - message reads "pdf/x3 version key (GTS_PDFXVersion) missing", and "Trapped key not true or false"
Help!! How can I be sure the file converted / or not?
kimYes I was/am aware of Preflight's inability to play nicely over cloud technologies in certain cases, especially wrt Standards technologies, this will be partially addressed in an upcoming version of Preflight without saying too much. But the same thing could theoretically have happened if the file was also located on another local network client or server. Leaving aside the argument that this may violate the Acrobat User Agreement - since purchasing the software, the user agrees to employ its functionality on a single host system and precludes host-client-based scenarios - this simply is not a supported use, meaning the user may not have expectations that it will work at all, if the applications requirements are not observed. There do exist server-solutions for Preflight files within networks, but Acrobat and by extension Acrobat Preflight is not one of those solutions, and (still) belongs in the single host-based desktop environment.
However most (99.9%) functions within Acrobat <-> acrobat.com file exchange are supported, file syncing across multiple devices will soon be supported, but Standards compliance is still admittedly a problem at this point. Some testing has been done using 3rd party cloud technologies starting with enterprise-based solutions, such as Office 365, and this will continue to ramp up to include other 3rd party products.
As for the second point, Preflight will usually change the PDF version to be complaint, are you saying that it was unable to do so in this case? It seems that this error should have popped up during the normal Preflight conversion attempt. Personally I think solving a workflow problem using the print path is a little bit of a heavy-handed approach, but if helped and the results are acceptable, then that is good. Since that path is non-existent on a Mac, as one needs to Save as Adobe PDF from the Print dialog's PDF drop-down menu, I am assuming your workflow involved file creation on a Mac, then further processing on Windows using the PDF printer. I am wondering if a simple resave/Save As... to PDF with overwrite on a Mac, or Preflighting the file using a PDF version compatibility profile before the PDF/X conversion would have helped. Since there are such a multitude of methods that a PDF can be created, there are also many ways within Acrobat that a user can shape the file to be compatible with the expected workflow, ie, 'many ways to skin a cat', without being morbid. -
Post-processing ends with the error message
Hi
when i try to run a report, i am getting the below error.
Beginning post-processing of request 5947956 on node RWS60160REMS at 15-MAR-2012 04:13:48.
Post-processing of request 5947956 failed at 15-MAR-2012 04:13:51 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
i check the OPP and the error stack is:
[3/15/12 4:13:51 AM] [2103265:RT5947956] Output file was found but is zero sized - Deleted
[3/15/12 4:13:51 AM] [UNEXPECTED] [2103265:RT5947956] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:677)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:425)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:244)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:6032)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
Caused by: oracle.xdo.parser.v2.XSLException: <Line 12, Column 34>: XML-22047: (Error) Invalid instantiation of 'xsl:with-param' in 'DPHEVD' context.
at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
The error is : Caused by: oracle.xdo.parser.v2.XSLException: <Line 12, Column 34>: XML-22047: (Error) Invalid instantiation of 'xsl:with-param' in 'DPHEVD' context.
I checked my XSL template and corrected that line.
even after the correction it the error still remains. In fact i deleted the line12. But it still shows that the line exists.
I updated the template many times but it keeps picking a wrong template.
Need help on this issue.
ThanksPlease post the details of the application release, database version and OS.
I checked my XSL template and corrected that line.
even after the correction it the error still remains. In fact i deleted the line12. But it still shows that the line exists.
I updated the template many times but it keeps picking a wrong template.Please create a new template and check then. Also, bounce the OPP.
Thanks,
Hussein -
XML Publisher post-processing error 'java.io.FileNotFoundException'
Hi,
We are getting following XML Publisher post-processing error while running XML Publisher report.
It was working earlier but suddenly its erroring out.
[9/07/10 9:00:17 PM] [OPPServiceThread1] Post-processing request 559655.
[9/07/10 9:00:18 PM] [39177:RT559655] Executing post-processing actions for request 559655.
[9/07/10 9:00:18 PM] [39177:RT559655] Starting XML Publisher post-processing action.
[9/07/10 9:00:18 PM] [39177:RT559655]
Template code: XXHPOXPRRFLR
Template app: XXH
Language: en
Territory: 00
Output type: PDF
[9/07/10 9:00:18 PM] [UNEXPECTED] [39177:RT559655] java.io.FileNotFoundException: /apps/oracle/DEV/inst/apps/DEV_hlt439erplap001/logs/appl/conc/out/o559655.out (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:274)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:173)
[9/07/10 9:00:18 PM] [39177:RT559655] Completed post-processing actions for request 559655.
Please help me out to resolve this issue.
Thanks & Regards,
SagarikaHi,
java.io.FileNotFoundException: /apps/oracle/DEV/inst/apps/DEV_hlt439erplap001/logs/appl/conc/out/o559655.out (No such file or directory)Most probably this file is not created (since no changes have been done recently, so definitely it is not a permission issue), and if there are any log files generate at the client side it should help in investigating the issue.
Thanks,
Hussein
Maybe you are looking for
-
Bad performance with many xmlqueries in select and big resultset
I'm running into big performance problems with the following query (edited the query a bit to remove sensitive information): SELECT id "id",created "created", xmlcast(xmlquery('declare default element namespace "http://www.example.com/myproject/sch
-
CS5 Indesign.exe experienced an error and needs to close. When opening File
This is what it shows for error: AppName: indesign.exe AppVer: 7.0.3.535 ModName: paragraph composer It opens the document for about 10 seconds and then I get the error... I tried clearing preferences, no addins, no new fonts added. Any other suggest
-
Why did my last day of trail work only 5 minutes?
I just experienced something I find quite unfair. I open photoshop, and I have 1 day left of the trail. It's the first time in days I've opened it. While being in Photoshop, which opened, I decide to reinstall my tablet, and get a message which says
-
International Data Pack - Notifications Warnings and Alerts
I recently added an $85/300Mb International Data Pack to my iPad. I received no Activation Confirmation, no data usage notificationa at 50%, 85% etc, and no warnings on activation in a new country. I lie awake at night and ponder these things, and th
-
Urgent , where i can find the description of table ?
Hello all , Has anyone can tell me where i can find the description of transparent table ? also include the description of fields ... is these description saved in a special place ( i mean in another table )???? Mmmmm ....... because