Post processing errors in REM

Hi Gurus,
What is significance of post processing in REM?
We have 4 options.
1)     MF45 u2013 Post process Individual
2)     MF46 u2013 Post process Collective
3)     MF47 u2013 Post processing list
4)     COGI u2013 Post processing individual Components
I am able to use COGI and clear errors occurred in back flushing.
But cannot under above first 3 transactions.
System is taking to all materials where correction is needed for eg in MF47. When I select a material and change post processing record, taking me to screen of post processing list of component.
Here I observe that bell , Batch determination and Stock determination are disabled. Where as these are enabled in COGI. What can be the reason behind? Any settings missing in REM?
Pl. help me.
Srini

Hi Srini,
To avoid this you can confirm the following things.
1.Ensure that suffecicient stock is available in the backflushing locations of each materail.
2.To prevent the generation of "post-processing list" you can block the BOM from getting backflushed if sufficient stock is not available in specified location for the BOM COMPONENTS. To do this change the "REM profile" to "002"in MRP4 view for the BOM MATERIAL.(if the profile is
not available you can crate it through SPRO).
3. To clear the existing Backlog use transcation MF47 and re-process(be ensure that required stocks is
available for each bom component)
Hope it will solve ur problem.
Regards,
R.Brahmankar

Similar Messages

XML Publisher post-processing error 'java.io.FileNotFoundException'

Hi,
We are getting following XML Publisher post-processing error while running XML Publisher report.
It was working earlier but suddenly its erroring out.
[9/07/10 9:00:17 PM] [OPPServiceThread1] Post-processing request 559655.
[9/07/10 9:00:18 PM] [39177:RT559655] Executing post-processing actions for request 559655.
[9/07/10 9:00:18 PM] [39177:RT559655] Starting XML Publisher post-processing action.
[9/07/10 9:00:18 PM] [39177:RT559655]
Template code: XXHPOXPRRFLR
Template app: XXH
Language: en
Territory: 00
Output type: PDF
[9/07/10 9:00:18 PM] [UNEXPECTED] [39177:RT559655] java.io.FileNotFoundException: /apps/oracle/DEV/inst/apps/DEV_hlt439erplap001/logs/appl/conc/out/o559655.out (No such file or directory)
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(FileInputStream.java:106)
 at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:274)
 at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:173)
[9/07/10 9:00:18 PM] [39177:RT559655] Completed post-processing actions for request 559655.
Please help me out to resolve this issue.
Thanks & Regards,
Sagarika

Hi,
java.io.FileNotFoundException: /apps/oracle/DEV/inst/apps/DEV_hlt439erplap001/logs/appl/conc/out/o559655.out (No such file or directory)Most probably this file is not created (since no changes have been done recently, so definitely it is not a permission issue), and if there are any log files generate at the client side it should help in investigating the issue.
Thanks,
Hussein

Sql upgrade 2000 to 2005 post processing error

Dear People,
I have successfully upgraded sql from 2000 to 2005 and im doing the post processing steps for upgrade using the sql tool and im getting error at the step " creare sap stored procedure" .im pasting the error messages below.
dev_w0
RROR: schema user dcb has administrator fixed server role (user_name() is 'dbo').
C This is not allowed. Please check the Server Roles of user dcb.
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
sapinst_dev.log
ERROR 2007-12-04 10:54:48.62 [iaxxgenimp.cpp:731]
 showDialog()
FCO-00011 The step ExeProcs with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysCopy|ind|ind|ind|ind|4|0|MssProcs|ind|ind|ind|ind|4|0|ExeProcs was executed with status ERROR .
ERROR 2007-12-04 10:54:48.62
 lib=iamodmssql module=CIaNtMssDmo
MDB-05053 Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]SELECT permission denied on object 'MSSSOURCE', database 'DCB', schema 'dcb'.
 SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.
regards
raj

hi siddesh,
i also get the following errors in sql,this could be the main reason
1.Msg 15157, Level 16, State 1, Line 1
Setuser failed because of one of the following reasons: the database principal 'dcb' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
Msg 229, Level 14, State 5, Procedure sap_droproc, Line 56
SELECT permission denied on object 'sysobjects', database 'mssqlsystemresource', schema 'sys'.
Msg 229, Level 14, State 5, Procedure sap_droproc, Line 60
SELECT permission denied on object 'sysobjects', database 'mssqlsystemresource', schema 'sys'.
Msg 208, Level 16, State 0, Procedure sap_droproc, Line 65
Invalid object name '#allnames
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid DCB
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, ASCII, optimized
pid 3236
Wed Dec 05 12:07:00 2007
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3236) [dpxxdisp.c 1239]
 shared lib "dw_xml.dll" version 111 successfully loaded
 shared lib "dw_xtc.dll" version 111 successfully loaded
 shared lib "dw_stl.dll" version 111 successfully loaded
 shared lib "dw_gui.dll" version 111 successfully loaded
 shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Dec 05 12:07:04 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >voyager_DCB_00 <
DpShMCreate: sizeof(wp_adm) 11808 (908)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05CB0040, size: 4232896)
DpShMCreate: allocated sys_adm at 05CB0040
DpShMCreate: allocated wp_adm at 05CB1B30
DpShMCreate: allocated tm_adm_list at 05CB4950
DpShMCreate: allocated tm_adm at 05CB4980
DpShMCreate: allocated wp_ca_adm at 06024C10
DpShMCreate: allocated appc_ca_adm at 06029260
DpShMCreate: allocated comm_adm at 0602A9D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 060AB880
DpShMCreate: allocated gw_adm at 060AB8C0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 060AB8F0
DpShMCreate: allocated wall_adm at 060AB8F8
Wed Dec 05 12:07:05 2007
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( voyager) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >voyager_DCB_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Wed Dec 05 12:07:45 2007
ERROR => W0 (pid 2840) died [dpxxdisp.c 14441]
ERROR => W1 (pid 2844) died [dpxxdisp.c 14441]
ERROR => W2 (pid 1904) died [dpxxdisp.c 14441]
ERROR => W3 (pid 3308) died [dpxxdisp.c 14441]
ERROR => W4 (pid 4056) died [dpxxdisp.c 14441]
ERROR => W5 (pid 4088) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 1244) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2888) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2932) died [dpxxdisp.c 14441]
ERROR => W9 (pid 2892) died [dpxxdisp.c 14441]
ERROR => W10 (pid 3116) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2096) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 2480) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:07:55 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Dec 05 12:07:55 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2840 Ended no 1 0 0
1 DIA 2844 Ended no 1 0 0
2 DIA 1904 Ended no 1 0 0
3 DIA 3308 Ended no 1 0 0
4 DIA 4056 Ended no 1 0 0
5 DIA 4088 Ended no 1 0 0
6 UPD 1244 Ended no 1 0 0
7 ENQ 2888 Ended no 1 0 0
8 BTC 2932 Ended no 1 0 0
9 BTC 2892 Ended no 1 0 0
10 BTC 3116 Ended no 1 0 0
11 SPO 2096 Ended no 1 0 0
12 UP2 2480 Ended no 1 0 0
Dispatcher Queue Statistics Wed Dec 05 12:07:55 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Wed Dec 05 12:07:55 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Dec 05 12:07:55 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:00 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >voyager_DCB_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1680) (SOFT_KILL)
Stop icman
killing process (2612) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1680 HANDLE:1608)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1680 HANDLE:1608)
wait for end of icman
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:10 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2612 HANDLE:1612)
DpStartStopMsg: send stop message (myname is >voyager_DCB_00 <)
NiIMyHostName: hostname = 'voyager'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Dec 05 12:08:13 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12099]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1548 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1548 (pos=2)
SiSelNRemove: removed sock 1548
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1548
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3236) [dpxxdisp.c 10371]
Good Bye .....

Post Processing Error - how to debug issue?

I copied a vanilla report and slightly modified it. the data definition is a vanilla oracle object that is un-changed.
i copied the data to my desktop and the report runs fine (from the Desktop). However the report fails to produce output when run from the application. I get the following in the log file
Beginning post-processing of request 15980025 on node RADON17 at 22-MAY-2008 09:07:49.
Post-processing of request 15980025 failed at 22-MAY-2008 09:07:49 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
The OPP log does not provide any details.
[5/22/08 9:07:49 AM] [24053:RT15980025] Executing post-processing actions for request 15980025.
[5/22/08 9:07:49 AM] [24053:RT15980025] Starting XML Publisher post-processing action.
[5/22/08 9:07:49 AM] [24053:RT15980025]
Template code: XXEAMWOREPORT
Template app: XX
Language: en
Territory: US
Output type: RTF
[5/22/08 9:07:49 AM] [UNEXPECTED] [24053:RT15980025] java.lang.reflect.InvocationTargetException
     at sun.reflect.GeneratedMethodAccessor33.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:624)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:421)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:233)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1659)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:969)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5916)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3452)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3541)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:244)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
Caused by: java.lang.NullPointerException
     at oracle.xdo.parser.v2.PagedNodeList.readPage(PagedNodeList.java:324)
     at oracle.xdo.parser.v2.PagedNodeList.start(PagedNodeList.java:312)
     at oracle.xdo.parser.v2.XPathFunctionCall.evaluate(XPathFunctionCall.java:540)
     at oracle.xdo.parser.v2.PathExpr.evaluate(XSLNodeSetExpr.java:851)
     at oracle.xdo.parser.v2.XSLForEach.processAction(XSLForEach.java:113)
     at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
     at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
     at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
     at oracle.xdo.parser.v2.XSLForEachGroup.processLazy(XSLForEachGroup.java:622)
     at oracle.xdo.parser.v2.XSLForEachGroup.processAction(XSLForEachGroup.java:97)
     at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
     at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
     at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
     at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
     at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
     at oracle.xdo.parser.v2.XSLForEach.processAction(XSLForEach.java:147)
     at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
     at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
     at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
     at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
     at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
     at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
     at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
     at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
     at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
     at oracle.xdo.parser.v2.XSLTemplate.processAction(XSLTemplate.java:191)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:512)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:489)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:271)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:155)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:192)
     ... 17 more
[5/22/08 9:07:49 AM] [24053:RT15980025] Completed post-processing actions for request 15980025.
Any other tools I can use to debug the error??? I'm stuck

1. Is it possible to get more debug information from the Crystal Engine to help determine which fields/formulae are causing the issue?
Unfortunately that is it as far as errors.
2. Does anyone have any initial ideas as to why this might be failing?
a) Apply the latest Service pack:
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
b) In the CR designer, enable Verify on First Refresh and Verify Stored procedures on First Refresh
c) If the above does not help, as a test create a new win app. All you should need is just the one line of code, no db code. Let the report prompt for the db logon. If the win app works, it's probably a permission issue.
Ludek

Post-processing error Template code: ARXCMGJR

Hi
SR 6648071.994
CAP GEMINI ERNST & YOUNG UK PLC
ISSUE: Customer is testing for a major upgrade to 11.5.10.2, and receive an error when submitting ARXCMGJR module: On Account Credit Memo Gain and Loss Journal report in post processing of concurrent:
[12/20/07 12:03:51 PM] [399437:RT7371897] Starting XML Publisher post-processing action.
[12/20/07 12:03:51 PM] [399437:RT7371897]
Template code: ARXCMGJR
Template app: AR
Language: en
Territory: US
Output type: PDF
12/20/07 12:03:57 PM] [UNEXPECTED] [399437:RT7371897] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:558)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:228)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
Caused by: java.lang.ClassCastException: oracle.xdo.parser.v2.XSLNode
at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:782)
at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:564)
... 17 more
[12/20/07 12:03:57 PM] [399437:RT7371897] Completed post-processing actions for request 7371897.
[12/20/07 12:10:36 PM] [OPPServiceThread0] Post-processing request 7371902.
[12/20/07 12:10:36 PM] [399437:RT7371902] Executing post-processing actions for request 7371902.
[12/20/07 12:10:36 PM] [399437:RT7371902] Starting XML Publisher post-processing action.
[12/20/07 12:10:36 PM] [399437:RT7371902]
Template code: ARXCMGJR
Template app: AR
Language: en
Territory: US
Output type: PDF
[12/20/07 12:10:37 PM] [UNEXPECTED] [399437:RT7371902] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:558)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:228)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
Caused by: java.lang.ClassCastException: oracle.xdo.parser.v2.XSLNode
at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:782)
at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:564)
... 17 more
Any Help on cause of this error is appreciated.
Thank you
JM

Hi Jean-Marc
Please use the internal xmlp mailing list for such questions - this forum is for customers and partners.
If you dop not know the ML drop me a mail.
To be able to investiage further we need the template and the XML data for the report.
Regards
Tim

Post processing problem

Hi all,
I am facing an issue where i have done booking through MFBF and some parts got stored for post processing, now the problem is that when i am doing document specific reversal, parts which got stored for postprocessing is not getting reversed while other parts got cleared. Kindly help
Prashant.Pillai
SAP PP Consultant

Hi,
There are 2 ways to solve the problem.
1. Clear the backflush error using MF47 and reverse both the docs.
2. Do the material document reversal and delete the post processing error in MF47 because the error there is MF47 is actually not posted and is under reserve for that Header material. This option is only good for testing but not in actual production scenario.
Regards,
Gaurav Mehra

Error in Start SAP system (Post Processing)

Hi.,
I got an error during IDES installation in the step "Start SAP system (Post Processing)".
The details of START.LOG is as follows
running sapstart.exe GML 00 xyz -wait
Start service SAP_00 on machine
OpenSCManager of
failed. Error#: 6
CreateNamedPipe for
\pipe\SAP_00 Failed, Extended Error #123
Start service SAP_00 on machine
OpenSCManager of
failed. Error#: 6
Start (StartSAPService) failed.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
Kindly help me out in this regard.
Thanks in Advance,
Sridhar

Sridhar,
Check the path for the profile (whether it is accessible or not). Just to make sure that system has been installed properly, you could try connection check to the database also.
Thanks.
regards,
Murali

Error during PDF post processing in HtmlToPDF

Hi,
I am using Web services interface to convert Html document to PDF. Works fine for simple html documents stored locally. However when using a remote html document (for example the one in the quickstart--http://www.adobe.com--I am getting an exception:
ALC-PDG-16003-16003-000: com.adobe.livecycle.generatedpdf.client.ConversionException: ALC-PDG-016-003-An unknown/unexpected error occurred during PDF post-processing.
I get the same error when trying this conversion from the Administration Console. I am using JBoss/turnkey. I do not have Adobe Acrobat running on the server computer.
Thanks,
Jesse

Hello Ramya,
I am not finished checking but I did make some progress. Testing from html file located on the server machine, I use the url for file. For example if the file is named foo.html and it is located in directory c:\adata then the file url is
file:///c:/adata/foo.html
That works for me using adminui, and from calling the web service.
The example in the quickstart ( converting the default page at
http://www.adobe.com ) does not work for me just yet. Still get the post pdf processing error.
If not doing so already, check the server log to see if any additional debug information is provided.
Regards,
Jesse

Post-processing ends with the error message

Hi
when i try to run a report, i am getting the below error.
Beginning post-processing of request 5947956 on node RWS60160REMS at 15-MAR-2012 04:13:48.
Post-processing of request 5947956 failed at 15-MAR-2012 04:13:51 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
i check the OPP and the error stack is:
[3/15/12 4:13:51 AM] [2103265:RT5947956] Output file was found but is zero sized - Deleted
[3/15/12 4:13:51 AM] [UNEXPECTED] [2103265:RT5947956] java.lang.reflect.InvocationTargetException
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:677)
 at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:425)
 at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:244)
 at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)
 at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:6032)
 at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
 at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
 at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)
 at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
Caused by: oracle.xdo.parser.v2.XSLException: <Line 12, Column 34>: XML-22047: (Error) Invalid instantiation of 'xsl:with-param' in 'DPHEVD' context.
 at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
The error is : Caused by: oracle.xdo.parser.v2.XSLException: <Line 12, Column 34>: XML-22047: (Error) Invalid instantiation of 'xsl:with-param' in 'DPHEVD' context.
I checked my XSL template and corrected that line.
even after the correction it the error still remains. In fact i deleted the line12. But it still shows that the line exists.
I updated the template many times but it keeps picking a wrong template.
Need help on this issue.
Thanks

Please post the details of the application release, database version and OS.
I checked my XSL template and corrected that line.
even after the correction it the error still remains. In fact i deleted the line12. But it still shows that the line exists.
I updated the template many times but it keeps picking a wrong template.Please create a new template and check then. Also, bounce the OPP.
Thanks,
Hussein

Error in post process event handler

We should write a post process event handler that updates the manager field. So, I used the following code to update the manager field when a user gets created:
Code:
public EventResult execute(long processId, long eventId,
Orchestration orchestration) {
System.out.println("Test for Event Handler");
try
String userKey = getUserKey(processId, orchestration);
System.out.println("USERKEY1"+userKey);
UserManager userMgmt = Platform.getService(UserManager.class);
System.out.println("USERMANAGEMENT"+userMgmt);
System.out.println(userMgmt.modify(new User(userKey)));
userMgmt.modify("usr_mgr_key","28",new User(userKey));
System.out.println("USERKEY2"+userKey);
} catch (ValidationFailedException e) {
System.out.println("Exception1");
} catch (AccessDeniedException e) {
System.out.println("Exception2");} catch (UserModifyException e) {
System.out.println("Exception3");} catch (NoSuchUserException e) {
System.out.println("Exception4");} catch (SearchKeyNotUniqueException e) {
return new EventResult();
private String getUserKey (long processID, Orchestration orchestration) {
String userKey;
String entityType = orchestration.getTarget().getType();
EventResult result;
result = new EventResult();
System.out.println("Entity Type"+entityType);
System.out.println("Process ID"+processID);
if (!orchestration.getOperation().equals("CREATE")) {
userKey = orchestration.getTarget().getEntityId();
System.out.println("UserKEY0"+userKey);
} else {
OrchestrationEngine orchEngine = Platform.getService(OrchestrationEngine.class);
userKey = (String) orchEngine.getActionResult(processID);
System.out.println("UserKEY-1"+userKey);
return userKey;
It compiles fine and when we try to create a user, the user gets created successfully. But, the expected behaviour of upadting the manager field with the user key '28' is not happening. My approach above - is it right or is there any other method that will make it work?
The output message I see is:
Test for Event Handler
Entity TypeUser
Process ID140343
UserKEY-1613
USERKEY1613
USERMANAGEMENToracle.iam.identity.usermgmt.api.UserManagerDelegate@75ecf9ed
<27-Feb-2012 10:56:41 o'clock GMT> <Warning> <oracle.iam.callbacks.common> <IAM-2030146> <[CALLBACKMSG] Are applicable policies present for this async eventhandler ? : false>
oracle.iam.identity.usermgmt.vo.UserManagerResult@14da2ada
<27-Feb-2012 10:56:44 o'clock GMT> <Error> <oracle.iam.identity.usermgmt.impl> <IAM-3051212> <An error occurred while searching for users - : [usr_mgr_key].>
Exception4
Thanks
Krish

i hope wrong coding.
Use this code.
UserManager userMgmt = oimClient.getService(UserManager.class);
//Attribute you want to modify
HashMap<String, Object> atrrMap= new HashMap<String, Object>();
atrrMap.put("usr_manager_key", Long.valueOf("1")); //user will upadated with manager key 1 (xelsysadm) make sure usr_key 1 (manager) exist in OIM.
//get the user to whom you want to modify
User user = userMgmt.getDetails("usr_key", "41", null);
user = new User(String.valueOf(user.getId()), atrrMap);
UserManagerResult result = userMgmt.modify("usr_key", String.valueOf("41"), user);
//UserManagerResult str = userMgmt.modify("usr_mgr_key","111",new User("41"));
System.out.println("UserUpdate.process() "+result.getStatus());
Also don't use UserManager class, As it will go for looping.
Use
EntityManager entityManager = Platform.getService(EntityManager.class);
entityManager.modifyEntity(orchestrationTarget.getType(), userKey, mapAttrs);
Also I am assuming you want to use Associate manager With user use case.
Thanks,
Kuldeep

ECC 5.0 database instance install error in database load (post processing)

HI all!
The installation of the environment :
VM SERVER v1.03
ECC 5.0 /WINDOWS SERVER 2003
SQL SERVER 2000 SP3
DB INSTANCE install occur error in database load (post processing) step:
sapinst.log:
INFO 2008-10-16 14:20:54
Creating file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\keydb.5.xml.
ERROR 2008-10-16 14:22:29
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.log
ERROR 2008-10-16 14:24:59
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPAPPL2.log
ERROR 2008-10-16 14:24:59
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.log
ERROR 2008-10-16 14:26:30
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPPOOL.log
SAPSSEXC.log:
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142100
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: D010INC deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: EndFastLoad failed with <2: Bulk-copy commit unsuccessful:3624 Location: rowset.cpp:5001
Expression: pBind->FCheckForNull ()
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: EndFastload: rc = 2
(DB) INFO: D010TAB deleted/truncated
SAPAPPL2.log
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142130
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPAPPL2.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPAPPL2.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: AGR_1250 deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: import of AGR_1250 completed (139232 rows) #20081016142200
(DB) INFO: AGR_1251 deleted/truncated
(IMP) INFO: EndFastLoad failed with <2: Bulk-copy commit unsuccessful:2627 Violation of PRIMARY KEY constraint 'AGR_1251~0'. Cannot insert duplicate key in object 'AGR_1251'.
3621 The statement has been terminated.>
(IMP) ERROR: EndFastload: rc = 2
(DB) INFO: AQLTS deleted/truncated
(IMP) INFO: import of AQLTS completed (17526 rows) #20081016142456
(DB) INFO: disconnected from DB
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: END OF LOG: 20081016142456
SAPSDIC.log:
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142230
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: DD08L deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed:3624 Location: p:\sql\ntdbms\storeng\drs\include\record.inl:1447
Expression: m_SizeRec > 0 && m_SizeRec <= MAXDATAROW
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: disconnected from DB
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: END OF LOG: 20081016142437
SAPPOOL.log:
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142530
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPPOOL.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPPOOL.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: ATAB deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed:3624 Location: p:\sql\ntdbms\storeng\drs\include\record.inl:1447
Expression: m_SizeRec > 0 && m_SizeRec <= MAXDATAROW
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: disconnected from DB
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: END OF LOG: 20081016142621
please help! thanks!

VM SERVER v1.03
can you please tell me what you mean with that? VMWare? Is that ESX-Server?
(DB) INFO: connected to DB
(DB) INFO: ATAB deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed:3624 Location: p:sql
tdbmsstorengdrsinclude
ecord.inl:1447
Expression: m_SizeRec > 0 && m_SizeRec <= MAXDATAROW
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: ExeFastload: rc = 2
I´ve seen those load problems under VMWare and on boxes hosted as Xen VMs.
Markus

Local Client Copy Error in Post-Processing

Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice. Also performed the update statistics on db.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name Component Package
/SAPCND/CC_GROUP_WS_NG AP-PRC-CON Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
Antarpreet

Hello Gagan,
I am facing the errors in table /SAPCND/CC_GROUP_WS_NG belonging to component AP-PRC-CON. It says post processing required.
The oss note says about component FINB-TR-DERIVATION.
I am not sure whether it is good to run the steps as mentioned in oss note 1235955.
Thanks for your response and look forward to further help.
Regards,
Antarpreet

Local Client Copy error in post processing phase

Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name Component Package
/SAPCND/CC_GROUP_WS_NG AP-PRC-CON Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
Antarpreet

Hi,
You need not worry at all as this is not a warning (although marked
so in message), and its just an information so you are better able to run
the job RGUGBR00 in SE38 with all the options mentioned in message above
marked.
Regards,
Aidan

Post-processing after errors in CAT5

I had few CO errors during CAT5 transfer, so financial postings were not executed. Errors were fixed in PS, but next time we run CAT5 there are no confirmation foir transfer.
The question is how it is possible to re-process or post process the transferred confirmations that are missing financial postings?
Thank you!

Hi Kabir,
Many thanks for your input. Now I would like to do something that is probably not possible.
I had a closed period, so CO postings failed. It was decided that the period will remain closed, so I want to re-process same confirmations, but with another posting date (that is in the open period). Is it possible?
Or I'd need to change the data in each time report to trigger new confirmations?
Many thanks!

Error in Database Load (post processing)

Hi, i have a problem when install the Database Instance. In the step "Database Load (post processing)". Error:
ERROR 2007-01-16 18:33:23
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:33:53
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:34:23
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:34:53
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:35:23
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:35:53
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:35:54
FJS-00012 Error when executing script.
And I want to open the file SAPVIEW.log for check the error, but the file size is 300Mb.
Help me, please.
Jonu00E1

300 MB? are u sure? this is way too much imho...as i see you install sqlsrv (= win)...you can find a tail like tool for windows under http://tailforwin32.sourceforge.net ... but somehow i doubt you will succeed to load the file...
-> which sap rlz you're installing?
GreetZ, AH

Post processing errors in REM

Similar Messages

Maybe you are looking for