Post Processing List
Hello all,
I have a question related to the Post Processing List (transaction MF47), where they appear the backlogs resulted from backflush.
If, by mistake, I deleted some postrocessing records (instead of processing them), how could I see later these deleted records? And how could I process them later on, if they need to be processed? --> do it exists an "undo", related to the action of deleting postprocessing records?
Thank you very much,
Edith
Dear Catalin Ignat,
Once if the Post Processing Record is deleted in MF47,
in no way you can fetch the data back.
It will not show either in AFFW or AUFM or COGI.
SAP has given a temporary means to use this Reprocessing allowed in REM
Profile.
So once deleted unknowingly its lost.
Reward points and close the thread.
Regards
Mangal
Similar Messages
-
Hi Gurus,
What is significance of post processing in REM?
We have 4 options.
1) MF45 u2013 Post process Individual
2) MF46 u2013 Post process Collective
3) MF47 u2013 Post processing list
4) COGI u2013 Post processing individual Components
I am able to use COGI and clear errors occurred in back flushing.
But cannot under above first 3 transactions.
System is taking to all materials where correction is needed for eg in MF47. When I select a material and change post processing record, taking me to screen of post processing list of component.
Here I observe that bell , Batch determination and Stock determination are disabled. Where as these are enabled in COGI. What can be the reason behind? Any settings missing in REM?
Pl. help me.
SriniHi Srini,
To avoid this you can confirm the following things.
1.Ensure that suffecicient stock is available in the backflushing locations of each materail.
2.To prevent the generation of "post-processing list" you can block the BOM from getting backflushed if sufficient stock is not available in specified location for the BOM COMPONENTS. To do this change the "REM profile" to "002"in MRP4 view for the BOM MATERIAL.(if the profile is
not available you can crate it through SPRO).
3. To clear the existing Backlog use transcation MF47 and re-process(be ensure that required stocks is
available for each bom component)
Hope it will solve ur problem.
Regards,
R.Brahmankar -
Post Processing Backflushing Backlogs
Hi All,
When I wanted to reprocess backflushing backlogs with MF45, I can not do any changes such as changing storage Location or batch number and etc because appeared post processing list is read only. How I can change this screen from display mode to Change?
Regards,
Fateme GoudarziDear Fateme Goudarzi,
1) just check ur REM profile in OSP2
2) under Error creation for Backflushing there are two options
Option A ) Create cumulative post processing records
Option B ) Also create individual post processing records
3) if option A is ticked , then Go to MF47, here u can change the Fields or clear the records
4) if option B is ticked, hen Go to COGI , here u can change the Fields or clear the records
Regards
Madhu Kumar -
Check Deposit List - cannot post Processing status not correct
Hi Expert,
I was trying the edit a check deposit list and I encountered error message during save.
"Cannot post. processing status not correct."
Procedure: Go into statement/list processing and save again. The processing status is then changed to 3 (revised).
How to go to statement/list processing to change to status to 3?
thank youHi,
Use T Code FF67,
Select the Check deposit list and click enter. Now go to Settings > Specifications
Here you will find the "Processing Status" for you to continue.
Regards
AKV -
Sql upgrade 2000 to 2005 post processing error
Dear People,
I have successfully upgraded sql from 2000 to 2005 and im doing the post processing steps for upgrade using the sql tool and im getting error at the step " creare sap stored procedure" .im pasting the error messages below.
<b>dev_w0</b>
RROR: schema user dcb has administrator fixed server role (user_name() is 'dbo').
C This is not allowed. Please check the Server Roles of user dcb.
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
sapinst_dev.log<b></b>
ERROR 2007-12-04 10:54:48.62 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step ExeProcs with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysCopy|ind|ind|ind|ind|4|0|MssProcs|ind|ind|ind|ind|4|0|ExeProcs was executed with status ERROR .
ERROR 2007-12-04 10:54:48.62
lib=iamodmssql module=CIaNtMssDmo
MDB-05053 Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]SELECT permission denied on object 'MSSSOURCE', database 'DCB', schema 'dcb'.
<p> SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.</p>
regards
rajhi siddesh,
i also get the following errors in sql,this could be the main reason
1.Msg 15157, Level 16, State 1, Line 1
Setuser failed because of one of the following reasons: the database principal 'dcb' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
Msg 229, Level 14, State 5, Procedure sap_droproc, Line 56
SELECT permission denied on object 'sysobjects', database 'mssqlsystemresource', schema 'sys'.
Msg 229, Level 14, State 5, Procedure sap_droproc, Line 60
SELECT permission denied on object 'sysobjects', database 'mssqlsystemresource', schema 'sys'.
Msg 208, Level 16, State 0, Procedure sap_droproc, Line 65
Invalid object name '#allnames
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid DCB
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, ASCII, optimized
pid 3236
Wed Dec 05 12:07:00 2007
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3236) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 111 successfully loaded
shared lib "dw_xtc.dll" version 111 successfully loaded
shared lib "dw_stl.dll" version 111 successfully loaded
shared lib "dw_gui.dll" version 111 successfully loaded
shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Dec 05 12:07:04 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >voyager_DCB_00 <
DpShMCreate: sizeof(wp_adm) 11808 (908)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05CB0040, size: 4232896)
DpShMCreate: allocated sys_adm at 05CB0040
DpShMCreate: allocated wp_adm at 05CB1B30
DpShMCreate: allocated tm_adm_list at 05CB4950
DpShMCreate: allocated tm_adm at 05CB4980
DpShMCreate: allocated wp_ca_adm at 06024C10
DpShMCreate: allocated appc_ca_adm at 06029260
DpShMCreate: allocated comm_adm at 0602A9D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 060AB880
DpShMCreate: allocated gw_adm at 060AB8C0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 060AB8F0
DpShMCreate: allocated wall_adm at 060AB8F8
Wed Dec 05 12:07:05 2007
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( voyager) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >voyager_DCB_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Wed Dec 05 12:07:45 2007
ERROR => W0 (pid 2840) died [dpxxdisp.c 14441]
ERROR => W1 (pid 2844) died [dpxxdisp.c 14441]
ERROR => W2 (pid 1904) died [dpxxdisp.c 14441]
ERROR => W3 (pid 3308) died [dpxxdisp.c 14441]
ERROR => W4 (pid 4056) died [dpxxdisp.c 14441]
ERROR => W5 (pid 4088) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 1244) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2888) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2932) died [dpxxdisp.c 14441]
ERROR => W9 (pid 2892) died [dpxxdisp.c 14441]
ERROR => W10 (pid 3116) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2096) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 2480) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:07:55 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Dec 05 12:07:55 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2840 Ended no 1 0 0
1 DIA 2844 Ended no 1 0 0
2 DIA 1904 Ended no 1 0 0
3 DIA 3308 Ended no 1 0 0
4 DIA 4056 Ended no 1 0 0
5 DIA 4088 Ended no 1 0 0
6 UPD 1244 Ended no 1 0 0
7 ENQ 2888 Ended no 1 0 0
8 BTC 2932 Ended no 1 0 0
9 BTC 2892 Ended no 1 0 0
10 BTC 3116 Ended no 1 0 0
11 SPO 2096 Ended no 1 0 0
12 UP2 2480 Ended no 1 0 0
Dispatcher Queue Statistics Wed Dec 05 12:07:55 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Wed Dec 05 12:07:55 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Dec 05 12:07:55 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:00 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >voyager_DCB_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1680) (SOFT_KILL)
Stop icman
killing process (2612) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1680 HANDLE:1608)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1680 HANDLE:1608)
wait for end of icman
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:10 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2612 HANDLE:1612)
DpStartStopMsg: send stop message (myname is >voyager_DCB_00 <)
NiIMyHostName: hostname = 'voyager'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Dec 05 12:08:13 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12099]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1548 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1548 (pos=2)
SiSelNRemove: removed sock 1548
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1548
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3236) [dpxxdisp.c 10371]
Good Bye ..... -
Post Process Event Handler not getting user's CURRENT_STATE for a UDF field
I have a post process event handler in OIM R2 BP04 , which runs on Trusted Reconciliation and it compares user's ("CURRENT_USER") state and ("NEW_USER_STATE") and based on that derives a business logic.
The problem that i am facing is that, it is not able to get the User's ("CURRENT_USER") state for a UDF(EMAIL_LIST) field and it is coming as null,and hence is breaking the business logic.The same Event Handler is working on TEST and QA ( 4 node cluster)environments and is not working on PROD environment( 4 node cluster).
The different thing that was done on was that during the initial recon the event Handler was not present and after the initial load of the users i have manually executed the database sql query which have updated the "EMAIL_LIST field manually for all the users
I think that since during the initial recon as the EMAIL_LIST was not populated and was populated through the SQL update for all the users, the orchestration inter event data does not contain email list, and so it is coming as null.
But i am seeing the same behavior for new records as well, which are created and then updated after event handler is registered.
Please reply, if you have encountered something similar.
Thnx
AkshatYes i need the old state, which is
Identity[] oldUserStatesIdntArr =
(Identity[])(Identity[])interEventData.get("CURRENT_USER"); -
Our little group of 4 LR users (all on LR 2.4 and XP or Vista 32) has a puzzle. On selecting Export we all have the expected item, but for two of us it stops at "Metadata" - there is no sign of the bottom item, "Post-Processing", which the other two have. Any suggestions before I suggest a re-install?
THe two computers with an incomplete list are configured to export to CD/DVD. If you switch them back to Disk using the drop down menu Post Processing will return.
-
Post process bank statements in FEBA
Hi expert,
I received a customer payment via a bank transfer and I have loaded the bank statement via transaction FF_5.
The G/L has been posted.
When I wanted to post process the subledger, via transaction FEBA, the open items did not appear immediately.
I had to select "More" and enter the account number.
Then I was able to select all the open items related to my payment.
Do you know what influences the fact that only 4 open items were shown?
How can I show the whole list of a specific customer?
Thank you.
Kind regards,
LindaHello Eugene,
Thank you for your reply.
No, we are not on new GL.
Kind regards,
Linda -
Post-processing error Template code: ARXCMGJR
Hi
SR 6648071.994
CAP GEMINI ERNST & YOUNG UK PLC
ISSUE: Customer is testing for a major upgrade to 11.5.10.2, and receive an error when submitting ARXCMGJR module: On Account Credit Memo Gain and Loss Journal report in post processing of concurrent:
[12/20/07 12:03:51 PM] [399437:RT7371897] Starting XML Publisher post-processing action.
[12/20/07 12:03:51 PM] [399437:RT7371897]
Template code: ARXCMGJR
Template app: AR
Language: en
Territory: US
Output type: PDF
12/20/07 12:03:57 PM] [UNEXPECTED] [399437:RT7371897] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:558)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:228)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
Caused by: java.lang.ClassCastException: oracle.xdo.parser.v2.XSLNode
at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:782)
at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:564)
... 17 more
[12/20/07 12:03:57 PM] [399437:RT7371897] Completed post-processing actions for request 7371897.
[12/20/07 12:10:36 PM] [OPPServiceThread0] Post-processing request 7371902.
[12/20/07 12:10:36 PM] [399437:RT7371902] Executing post-processing actions for request 7371902.
[12/20/07 12:10:36 PM] [399437:RT7371902] Starting XML Publisher post-processing action.
[12/20/07 12:10:36 PM] [399437:RT7371902]
Template code: ARXCMGJR
Template app: AR
Language: en
Territory: US
Output type: PDF
[12/20/07 12:10:37 PM] [UNEXPECTED] [399437:RT7371902] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:558)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:228)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
Caused by: java.lang.ClassCastException: oracle.xdo.parser.v2.XSLNode
at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:782)
at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:564)
... 17 more
Any Help on cause of this error is appreciated.
Thank you
JMHi Jean-Marc
Please use the internal xmlp mailing list for such questions - this forum is for customers and partners.
If you dop not know the ML drop me a mail.
To be able to investiage further we need the template and the XML data for the report.
Regards
Tim -
Dear All,
We have an EXIT function which resides in one planning level and the planning layout in another planning level.
The EXIT function is calculating the numbers correctly which creates internal table XTH_DATA and passes it to function module UPF_PARAM_EXECUTE. When we check XTH_DATA, the data records are as we need the records to be generated.
The issue we are having is that, when the EXIT funciton has completed, the data in XTH_DATA looks perfect. However, the data saved to infocube is not exactly the same as it created. For example, the EXIT creates data for 2007/001 - 012. The resulting data in infocube contains many entries of fiscal period 2006001 through 2006006. The posting period is left blank from EXIT function. The resulting data has posting period of blank, 1 through 6, etc.
We use request ID to diaplay data and makes sure the data source is correct.
Planning level for EXIT function data model:
Characteristics are:
Assortment Type
Base Unit
Climate Zone
Concept
Department
Distribution Channel
Fiscal year
Fiscal year/period
Fiscal Year Variant
Hierarchy ID
Lifestyle
Local currency
Plng Area
Posting period
Sales Organization
Version
Volume Group
Key Figures are:
Balanced Receipts
Number of Stores
Stock Index
Any helps, comments, and/or hints are greatly appreciated.
Best regards,
SamHighly frustrating. I've got the IPlanetDirectoryPro SSO token being set, but the custom code to add additional domain cookies...those are not re-written by the cdservlet, and even if hard-coded for testing (I assume I can parse the domain/URI being requested by parsing the HttpServletRequest, but am just testing now) to the 'new domain,' they are sent but discarded by the browser.
This is bad, as those custom cookies are required by several apps. Is there any documentation on writing a custom cdcservlet, sample code, code for the existing one, or any other means to do this?
To be clear - 'basic' CDSSO seems to be working, if a request is made to a resource on Domain B, it directs to the AM host, which is in Domain A. The IPlanetDirectoryPro cookie is being set for Domains A and B in this case, and accepted by the browser. That setting I finally found in AMAgent.properties, here:
com.sun.am.policy.agents.config.cookie.domain.list (in case this helps someone else in the future)
However, I have post-process code implementing AMPostAuthProcessInterface which was setting custom cookies required by some apps, and I am unable to change the domain these are set in. More accurately, I can change the domain, and the data is sent, but the browser is then rejecting it, presumably as it's seeing it as a cross-domain cookie, and thus bad/discarding.
This seems to only leave me with trying to use a custom cdcservlet, assuming I can find the existing code or similar to start with, as I have no idea how it's avoiding the cross domain cookie issue..
Anyone? -
Post-processing pipeline causes error when placing "SceneGrid" object into 3D scene
Hi,
first want to thank you guys for the great work with proscenium and the awesome features.
I was going through the examples and found a bug. I tried a combination of the examples "TestLines" and "TestPPEncodeDecodeHDR".
The post processing pipeline somehow manipulates the render sates/vertex program in a way it crashes as soon as it should perform the drawTriangles call for a "SceneGrid" object.
It does not seem to be related to my particular post processing setup - I tried TestPPBloom and TestPPEncodeDecodeHDR from the examples. The post processing pipeline seems to work fine with a 3DS model (Teapot) .
//add grid
scene.addChild(new SceneGrid());
//setup post-processing
if(true) {
instance.createPostProcessingColorBuffer();
instance.colorBuffer.targetSettings.useHDRMapping = true;
instance.colorBuffer.targetSettings.kHDRMapping = 4;
var colorToPrimary:RenderGraphNode = new RenderGraphNodePPElement(instance.colorBuffer, null, RenderGraphNodePPElement.HDR_DECODE, "Decode HDR" );
colorToPrimary.addStaticPrerequisite(instance.colorBuffer.renderGraphNode);
instance.renderGraphRoot.clearAllPrerequisite( );
instance.renderGraphRoot.addStaticPrerequisite(colorToPrimary);
This gives me the following error:
Error: Error #3607: Stream 2 is set but not used by the current vertex program.
at flash.display3D::Context3D/drawTriangles()
at com.adobe.scenegraph::Instance3D/drawTriangles()[D:\Depots\Proscenium\branches\rel\code\P roscenium\src\com\adobe\scenegraph\Instance3D.as:537]
at com.adobe.scenegraph::PB3DCompute/compute()[D:\Depots\Proscenium\branches\rel\code\Prosce nium\src\com\adobe\scenegraph\PB3DCompute.as:332]
at com.adobe.scenegraph::RenderGraphNodePPElement/render()[D:\Depots\Proscenium\branches\rel \code\Proscenium\src\com\adobe\scenegraph\RenderGraphNodePPElement.as:272]
at com.adobe.scenegraph::Instance3D/render()[D:\Depots\Proscenium\branches\rel\code\Prosceni um\src\com\adobe\scenegraph\Instance3D.as:304]
at com.adobe.scenegraph::BasicScene/enterFrameEventHandler()[D:\Depots\Proscenium\branches\r el\code\Proscenium\src\com\adobe\scenegraph\BasicScene.as:273]
Thanks,
Philipp
Full Source Code:
package
import com.adobe.scenegraph.*;
import com.adobe.scenegraph.loaders.*;
import com.adobe.scenegraph.loaders.collada.*;
import com.adobe.scenegraph.loaders.obj.*;
import flash.display.*;
import flash.display3D.*;
import flash.events.*;
import flash.geom.*;
import flash.utils.*;
public class TestLinesWithPostProcessing extends BasicScene
override protected function initModels():void
//add grid
scene.addChild(new SceneGrid());
//add teapot
// var f:Function = function(event:Event):void { (event.target as ModelLoader).model.addTo(scene); }
// var loader:OBJLoader = new OBJLoader("res/content/teapot.obj");
// loader.addEventListener(Event.COMPLETE, f, false, 0, true);
//setup post-processing
if(true) {
instance.createPostProcessingColorBuffer();
instance.colorBuffer.targetSettings.useHDRMapping = true;
instance.colorBuffer.targetSettings.kHDRMapping = 4;
var colorToPrimary:RenderGraphNode = new RenderGraphNodePPElement(instance.colorBuffer, null, RenderGraphNodePPElement.HDR_DECODE, "Decode HDR" );
colorToPrimary.addStaticPrerequisite(instance.colorBuffer.renderGraphNode);
instance.renderGraphRoot.clearAllPrerequisite( );
instance.renderGraphRoot.addStaticPrerequisite(colorToPrimary);
override protected function resetCamera():void
scene.activeCamera.identity();
scene.activeCamera.lookat(new Vector3D(0, 5, -15), new Vector3D(0, 0, 0), new Vector3D(0, 1, 0));Hi John,
Pls check in SXI_CACHE to verify that the BPM(active in Integration Repository) has the latest version active on the ABAP stack.(I am saying this because you mentioned that a mapping step was missing..is it not..)
go to SXI_CACHE --> Integration Processes(double click), in the list that you get verify that the return code is 0.
Thanks & Regards,
Renjith. -
Workflow for Post Processing Magic Lantern RAW Video?
Dear Adobe Community,
I am interested in learning what steps/workflow fellow DSLR, Magic Lantern users take to Edit, Color Grade and add FX to their RAW video? Here is my untested thought process so far:
Adjust the Exposure, White Balance, Lens Distortion, Etc of DNGs in Adobe Camera Raw.
Import DNG image sequence into Premiere Pro for Editing
Use Dynamic Link to Color Grade in Speed Grade
Use Dynamic Link to add effects in After Effects
Render out in Premiere Pro
One of the concerns I have is that I've read on the Magic Lantern Forums that Premiere Pro will reduce 14 Bit DNG to 8 Bit. Is this something you've encountered? Is there a workaround?
I am fairly new to all of this and would greatly appreciate any feedback to point me in the right direction for Post Processing Magic Lantern Raw Video files. I have a subscription to Lynda.com as well if you have any suggestions for courses to look at.
Thank-you for your time.Nothing Adobe makes can read MLV or RAW video files, so you have to use something else to convert them into CinemaDNG (a folder of images) or a high bit depth movie file (ProRes etc.) - there are many tools listed in the ML forum which can do that.
Premiere Pro can import cDNG footage but it struggles to play back in real time, and will not allow you to grade it using Camera Raw. To do that you have to use After Effects. The workflow is supposed to be "ingest in Prelude, edit in Premiere Pro, color in SpeedGrade", but quite frankly the learning curve for SG is massive. Adobe's attitude to CinemaDNG is strange; although the standard is open, support is only coded for very specific models of camera and the CC suite assumes a Hollywood workflow where professional colorists (who spend years learning how to use the software) operate offline from the rest of the edit, usually after all the cuts are made. It's not set up for a typical lone DSLR filmmaker, which is quite frankly why a lot of ML users prefer another well-known way to resolve the problem.
The 'fast and dirty' approach to getting a cinematic grade in Premiere would be to apply LUT files to the footage using the Lumetri effect (basically running SpeedGrade presets), or you can hand-grade it using the inbuilt Color Corrector tools - but that doesn't cover the other important stuff that ACR can do, such as lens correction, alignment, noise reduction, camera calibration profiles, etc. - for that, you should import the cDNG footage into After Effects (which does support ACR), correct and calibrate the frames, then export back to something high quality that Premiere can work with (such as DNxHD or ProRes 444). You won't notice any visual loss in quality, and Premiere then will play the timeline without struggling, but it takes a loooong time to chew through every clip.
As to if Adobe applications will ever support MLV files natively - well, since Adobe relies on close partnerships with camera manufacturers including Canon, you can guess what would happen if Adobe ever endorsed it. The only scenario I can imagine is if MLV is adopted in-camera by a major DC manufacturer (Alexa, etc) so vendors can support it without slapping Canon in the face. Flying pigs come to mind. -
I am a new user to the Photoshop CC 2014. I am unable to save images post processing. Error given is "Unable to save image Write access not granted". Can some one please help me with this.
I am using Mac OS Yosemite Version 10.10.2
Regds
ShashiIn a finder window highlight and right click the folder you are trying to save to and select Get Info. In the window that opens look at the bottom to see if you have Read/Write permissions. If you don't click the Plus sign and add your Admin Username to the list and give it full Read/Write permissions.
Open Disk Utility and on the First Aid tab select Repair Permissions and let it run. -
HTML Client: post process a preprocess query?
I am trying to set up a method for quoting jobs and keeping track of parts for the quote. Many quotes can have many parts, so I have a many to many relationship between Quotes and Parts via a table called QuoteParts.
I am trying to design an Add Edit Quote screen with two tabs: one has the quote details and a list of parts for this quote. The other tab has a list of parts available to go on the quote. I have it set so when you tap the item in the list not added to the
quote, it adds the QuotePart and the part moves from the list of available parts to the quote.
I am filtering the two lists using two preprocess queries. They both work fine when opening the screen, however when I add a new part, the part shows up in both lists. I'm assuming it's because the preprocess query didn't preprocess, since the data was added
to the screen and has not been saved yet. If I save and reopen the screen, all shows up fine.
So on to my question: Is there any way to POST process a preprocess query?
I got the idea of how to work with this via http://blogs.msdn.com/b/lightswitch/archive/2013/04/10/many-to-how-many-html-edition-heinrich-wendel.aspxClose, try this:
myapp.BrowseParts.AddPart_execute = function (screen) {
myapp.showAddEditPart(null, {
beforeShown: function (newScreen) {
var newPart = new myapp.Part();
newPart.Hardware = screen.Hardware;
newScreen.Part = newPart;
}, afterClosed: function (newScreen, navigationAction) {
if (navigationAction === msls.NavigateBackAction.commit) {
// Save all changes to parts
return myapp.activeDataWorkspace.ApplicationData.saveChanges().then(function () {
// Refresh the Parts that other code does not reach
screen.UsedParts.refresh();
screen.UnusedParts.refresh();
Be careful about creating global scope functions like you did: RefreshPartsLists.
Cheers
Dave
Dave Baker | AIDE for LightSwitch | Xpert360 blog | twitter : @xpert360 | Xpert360 website | Opinions are my own. For better forums, remember to mark posts as helpful/answer. -
Keyring being post processed every 10 min on UCS 2.2(1b)
Hello,
I'm just doing a fresh new UCS install (2.2(1b)), and after having the error of the default keyring being invalid, I've regenerated it.
What I'm now seeing in the event log of UCS is that at every 10 min, there is some post processing activity on the keyring.
I do not have any alarm or warning, but I usually do not see this activity on other systems.
Has anybody seen this yet? Any workaround?
Thanks
GustavoGustavo,
There is a new bug opened to track this situation cause I would not call it an issue:
https://tools.cisco.com/bugsearch/bug/CSCum50510
Please open a TAC service request to add your case to the list and attach this bug to the ticket OR if you want, now that you know there is a follow-up of the situation taking place, you may just subscribe to the bug itself and receive notifications about the bug progress:
Subscribe to a bug:
http://www.cisco.com/cisco/support/notifications.html
1-Click on “Add Notification”
2-Under “Notification Name” enter a name you can easily remember, enter the email where you want to receive the notification and hit “Continue”
3-Choose “Track a specific Bug ID” and “Continue”
4-Enter “ Bug Number” and “Continue”
5-Click on “Finish”
Here is a guide for this process.
http://www.cisco.com/web/tsweb/flash/support/ngw/cisco_support_cns.html
I hope this helps you.
Rate ALL helpful answers.
-Kenny
Cisco Support Community is also present in Spanish:
https://supportforums.cisco.com/community/spanish/data_center
Maybe you are looking for
-
Calendar event not showing correctly
Hi, I'm running several iCloud calendar and encountered a weird problem today with the way an event block rendered in day view in my personal work calendar. I'm putting in a night-shift which runs from 2230 on a Sunday 30th March 2014 to 0730 the ne
-
Firewire specs, and 400 to 800 connection
I need to connect an Epson Perfection 4870 scanner to either of my 2009 Macbook Pros. The scanner has a conventional 400 firewire socket - how many pins? The Macbook Pros each have an 800 firewire socket - how many pins? Should I be looking for an ad
-
Installing Hyper-V on Windows 7
Hi! I installed Hyper-V on Windows 7, but when I try to connect to local host, the follow message appears: "Hyper-V has not been installed on computer localhost"" Someone can help me? Regards
-
My macbook pro (13inch mid 20101) is running very slowly since I upgraded to Yosemite. How can I cure this or how can I remove Yosemite? OS X 10.10.1 2.4 GHz Intel Core 2 duo 4GB 1067 MHz DDR3 NVIDIA GeForce 320M 256MB Opening apps or web pages is i
-
I am using an iMac G5, 10.4.8, with Quicktime 7.1.3 and for some reason I cannot hear any quicktime movies played. The video portion works fine, just not the sound. I've gone into all of the sound system files and my microphone and speakers work fine