Post-Processing Screen Hang

Trying to Direct Link from PPRO 2014 to SG 2014. It's a C300 file. It's only maybe 20 seconds long. However, speedgrade hangs at Post-Processing.
GPU: Quadro 5000 + Tesla C2075
64GB RAM, Hex Core i7

I was able to get it to work by disabling GPU DirectLink. Which with two GPU's I think my Maximus Configuration should work.

Similar Messages

  • Residual item column in post processing F-28 or F-32

    Hi
    When i go to F-28 or F-32 in the post processing screen in the Residual items Tab i could not see residual items column after net amount column, instead i am seing payment item Column.
    How can i fix this? In residual item Tab i typically used to see residual items column.
    Can some one please advice on how to get this?
    Thanks.

    Hi,
       After click on process open items button in F-28, Click on EDITING OPTION Button.Here you can deselect the check box ENTER PAYMENT AMOUNTS FOR RESIDUAL ITEMS. I hope your problem solved.
    Regards
    Maruthi.

  • Reinstall EP6SP2P4 and then post processing hangs AGAIN!!!!

    I reinstalled EP Sp2 Patch4 on Solaris and it runs through the install until the very end and then is just hangs....and the reason it hangs is the server cannot start....all logs pcd etc etc show successful deploy of applications during the install....
    it just never completes the portal install post processing....
    This never happens on NT.....what is the deal with Solaris? I never would believe that an SAP NT product is more stable but clearly the Solaris is a POS!!!!
    John Ryan

    I have checked the deployment logs...and other logs
    Loading service: com.sap.portal.runtime.system.repository|application_reposito
    ry
      Loading service: com.sap.portal.umeregistration|ume_registration
      Loading service: com.sap.portal.usermanagement|usermanagement
      Loading service: com.sap.portal.usermanagement|user_management_engine
      Loading service: com.sap.portal.usermanagement|security
    Aug 13, 2004 12:36:10...       com.sapportals.config.tools.upgrade.Upgrader [Cli
    ent_Thread_6] Warning": Upgrading Configuration Archive named "portal" with vers
    ion "6.0.2.0"
    Aug 13, 2004 12:36:20...       com.sapportals.config.tools.upgrade.Upgrader [Cli
    ent_Thread_6] Warning": Configuration upgrade completed
    Loading additional applications:
    Loading services:
    Portal initialization done.
    Everything looks fine, but why doesn't the server come up.....
    The port is open no other process is using it...
    Just does not make sense....
    John

  • Satellite U400-22n and Win7 - screen hangs after 5 min

    Hi, This is my first post
    Ive purchased a new U400 with Vista preinstalled, last week ; 2 days ago Ive upgraded to windows 7 32bit professional when I stared Installing it windows prompted me that it requires a full installation , so I done a normal full install, windows 7 installed normally .
    Now my screen hangs after 5 min and windows gos black and reboots after 3-5 min, Ive downloaded all the drivers from the Toshiba site Ive used the auto detect, and installed the drivers one by one and tested if the reboot stops , Ive reinstalled windows now 4-5 time returned my copy to the shop and got a new copy of the windows DVD, its the same,
    Please has some one any advice for me. As the shop Ive perched this from will not upgrade to windows 7 for me.

    hi Mather,
    any bluescreens visible?
    win7 32bit i guess...
    you have to install all the drivers for win7 provided by toshiba in the right order!
    first chipset and patchfiles if available...
    i think a clean install will do the job!
    make sure that the hdd is error free!
    you can upgrade from vista 32bit to win7 32bit
    but no chance to upgrade to a win7 64bit when a vista 32bit is installed...

  • Solved Mac Mini (late 2010) Blue Screen Hang issue

    I posted several questions about blue screen hang and was able to fix my problem, after LOTS of work and searching in various forums.
    I had been unable to use my computer for over a month; it was simply hanging at the blue screen, and that seemed to happen when my Finder.app had crashed, hiding all my document icons on my desktop, etc. I also had been having issues with Time Capsule and my backup Iomega disk, which is touchy.
    When I tried a fix my icons had returned but I had been unable to use computer after rebooting, and I had tried every sort of key combo including trying to boot from the original install CD, etc., but nothing worked. I could not even reboot using original 10.6 software CDs, and was only able to log in Single User Mode and had tried many fixes with Terminal, and finally, this worked, two of the fixes I used are listed below.
    It seems, in part, that resetting certain "privileges" worked.
    This tip first tip is for Mac OSX 10.3 to 10.3.9 and even though I am on 10.6.8, I ran it, and it worked. THis is the original link location: http://support.apple.com/kb/TS1411
       1. Start up the computer in Single-User Mode.
       2. Type: in Terminal the command
         mount -uw /
       3. Press Return.
       4. Type (in Terminal, note space before mv)
          mv /Library/Preferences/com.apple.loginwindow.plist preferences2.old
         Note space between ".plist" and "preferences".
       5. Press Return.
       6. Type:
         mv /Library/Preferences/com.apple.windowserver.plist preferences3.old
       7. Press Return.
       8. Type: reboot
       9. Press Return.
    Then I followed up with this tip to "Reset certain privileges"
      1. Start up the computer in Single-User Mode.
       2. Check the volume with fsck.
       3. Type: mount -uw /
       4. Press Return.
       5. Type: chmod 1775 /
       6. Press Return.
       7. Type: reboot
       8. Press Return.
    When I rebooted, yayyyy! I was able to log back onto my computer, however, all icons were missing, again, so I typed this fix
    /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder & disown
    I am not sure what 1775 means, but this fix got my computer back up, saving me at least a $150 bill at the Genius Bar.
    When I typed those commands into Terminal, this is what returned, and seems to be some  QXPscrpiting issue, though I have no idea what that is. and again, some  Dropbox issues. If anyone has any idea what all those issues are regarding ScriptingCodes please let me know.
    My-Mac-mini:~ username$ /System/Library/CoreServices/Finder.app/Contents/MacOSFinder &
    [1] 892
    Rangdrols-Mac-mini:~ username$ -bash: /System/Library/CoreServices/Finder.app/Contents/MacOSFinder: No such file or directory
    [1]+  Exit 127                /System/Library/CoreServices/Finder.app/Contents/MacOSFinder
    My-Mac-mini:~ username$
    Rangdrols-Mac-mini:~ username$ /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder & disown
    [1] 894
    My-Mac-mini:~ username$ 2012-08-25 19:37:10.594 Finder[894:903] Error loading /Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScript ingAdditions:  dlopen(/Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QX PScriptingAdditions, 262): no suitable image found.  Did find:
        /Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScript ingAdditions: no matching architecture in universal wrapper
    Finder: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/QXPScriptingAdditions.osax" declares no loadable handlers.
    Dropbox: Entered INJECT_pthread_entry
    Dropbox: Installing event loop timer
    Dropbox: proc: 0x11d171e53
    Dropbox: upp: 0x11d171e53
    Dropbox: InstallEventLoopTimer: 0x101341dd8
    Dropbox: GetMainEventLoop: 0x101341c41
    Dropbox: timer installed!
    Dropbox: Loading /Library/DropboxHelperTools/Dropbox_u501/DropboxBundle.bundle/Contents/MacOS/Dr opboxBundle
    Dropbox: dlopen returned: 0x11bb12090
    module initializer in main thread?: 1

    Great work, thanks.
    As far as those errors, ypu have some missing OS components it seems.
    And, before the mount -uw you really should've done this...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214

  • Screen hangs and then reloads when i right click a folder or any object in windows 8.1

    when ever i right click something like a picture,docx,folder etc the cursor shows the loading sign and does not load right-click menu and after showing the loading sign for a few seconds, screen hangs(screen becomes white-ish) and after few more seconds
    reload. no matter how many times i right-click same thing happens

    What will this do actually? will it refresh my Pc(remove apps etc)?
    Hi,
    Which operation\solution did you refer to? Could you please give use more detailed description?
    Regarding to the command posted
    Kapil-Arya , it is intended to fix component store corruption, it will not refresh your PC
    http://technet.microsoft.com/en-us/library/hh852138.aspx
    And have you tried other solutions? Any result?
    Regards
    Yolanda Zhu
    TechNet Community Support

  • Need Help - Sign in screen hangs Adobe PS CS6 trial installation

    While Installing Adobe Photoshop CS 6, I clicked on Set-up.exe to run as an administrator in Windows 7 Home Premium 64 bit workstation. In the Adobe Id sign in page, I entered my email id and password. However, the screen hangs while authenticating my id and password and I had to kill the process in Task Manager and restart the installation process with the same issue of screen hanging. I tried the same on a different Computer with Windows 7 Ultimate 32-bit and the same issue occurs. Please help.

    Hi JJMack, There is no option to cancel it. Either you click on "Sign in" or "Cancel" to exit the installation

  • Process flow hangs when mapping execution fails

    Hi,
    Has anyone faced the 'process flow hanging' problem after upgrading to OWB 9.2.0.4? Don't know why this is happening again after the upgrade. The audit browser clearly indicates one of the mappings has failed and workflow tables indicate there was a notification upon failure. The process flow runs several sub process flows each containing 5-6 mappings.
    Also, the mapping that failed (due to unique key violations on the target table) executed the post mapping stored procedure although the post mapping run condition was set to 'ON SUCCESS'. Is this the expected behaviour for the post mapping operator when there are database related failures?
    Our environment is OWB 9.2.0.4 on AIX 5.2.
    Database version is 9.2.0.5. We recently upgraded the database from 9.2.0.4 to 9.2.0.5 and OWB from 9.2.0.2.8 to 9.2.0.4. Process flows are executed using sqlplus.
    Thanks,
    Chethan

    Hi,
    I would expect you to have less issues with 9204 as there were some fixes applied. So I have not seen this before.
    To get into the mapping a little bit more, is this a row based mapping that is under the tresshold? In any case, if you specify "on success" I would expect it to only work on success... A database related error will also cause it to get an error, so this is interesting as well.
    Does the error repeat at any case if there is a failure?
    Jean-Pierre

  • Nokia Pro Cam photos post-processing makes yellowi...

    Hello there! I'm here to report a common problem which happens while taking pics with Nokia Pro Cam on my lumia 920. When you take a pic it has right colours and is very sharp but after apps' post-processing the pic turns yellowish and a bit softer. It doesn't look too good after that treatment. I'm asking for patch that would prevent this problem. While I was at Windows Phone central-forums I saw that I'm not alone with this issue.
    There is photos when one can see this issue.
    First is just after taking pic and second is after processing it. I guess one can see very clear difference.
    Attachments:
    wp_ss_20130829_0004.png ‏1693 KB
    wp_ss_20130829_0005.png ‏1377 KB

    shadow118 wrote:
    I see the same thing on my 620 (yes, I know Pro Cam is not officially supported by the 620 and would not work as good as on 920 or 1020, but I found a way to get it  the interface is just so much better)
    When I take a picture with manual focus, in the screen the pic looks sharp, but when i open the gallery, it changes (wll, postprocesses) to blurry 
    just a reminder, using unsupported apps may cause serious hardware problems in short/long term. i'm sure u won't be happy when u see melting plastic parts and  some smoke on your device
    The silence will fall

  • Lumia 1020 - Disable Post Processing?

    Preface:  I've only had the Lumia 1020 for 48 hours.
    Problem:  I've noticed that when taking pictures with the Nokia Pro Camera application, the preview after capturing the image is awesome.  If I then go to look at the captured image, there is a short pause, and suddenly the picture goes soft, detail is lost, colors become horribly skewed.   It would seem that there is some massive post processing being done after the image is archived.
    Request:  Is there any way to disable this post processing?  It's taking wonderful pictures and destroying them.
    I'll see if I can take a screen capture to show what I'm talking about and I'll post again after work.
    Lumia 1020 Quirks.
    - Post processing done even on "raw" 34MP images.
    - The entire screen is powered when using Peek. Despite being OLED and Nokia specifically stating otherwise.
    - Can turn on (but not off) camera in the background on a call. App doesn't open but shutter does and spins up CPU.

    So after looking at the 5MP version (attached) it seems that it is indeed post processing it after the fact and saving it that way.  Which begs the question.... Why?  Isn't the photo review going through the Nokia Pro Camera app anyway?  Why is it doing post processing (I've also had it remove red-eye automatically when reviewing photos)?
     Stil, I want to know; how can I disable it?
    *Edit:  Trying to attach the large format photo as well...
    *Edit2:  After uploading both and flipping back and forth between the "review" image, the 5MP saved image, and the highres saved image, they are all the same, meaning that it is doing the post processing as it is saving the 5MP & 34MP image.  This means there is no way to truly undo it.  (It also means things like auto-redeye reduction are permanent, and can't be undone, tweaked, etc.)
    So.... thoughts?
    Lumia 1020 Quirks.
    - Post processing done even on "raw" 34MP images.
    - The entire screen is powered when using Peek. Despite being OLED and Nokia specifically stating otherwise.
    - Can turn on (but not off) camera in the background on a call. App doesn't open but shutter does and spins up CPU.
    Attachments:
    WP_20130812_12_46_36_Pro.jpg ‏2045 KB
    WP_20130812_12_46_36_Pro__highres.jpg ‏10902 KB

  • Process flow hangs in state "bussy"

    Hi,
    We are encountering what seems to be a "random" problem when runing process flows. In about 1 out of 4 runs the flow "hangs" with status "busy"
    The technical specs are as follows:
    OWB 9.2.0.2.8 on WIN2K Server SP4.
    There are two runtime repositories on two different WIN2K database servers (Oracle 9.2.0.4 EE)
    The symptoms are as follows:
    - We have more than 10 process flows containing from 15 to 60 processes. The problem is not related any single process flow, and occurs on both our target servers.
    - The process flows runs OK in approximately 3 out of four runs.
    - When the process flows "hangs", one or more of the processes in the process flow also hangs in the "busy" state. The hanging process can be a mapping or an external process
    - The processes that have status "busy" have actually finished. They have a completion time set, and in the case where the process sends mail, the mail has been received. In the case of mappings I have verified that the mapping has completed, and that the session performing mapping has terminated.
    - When the problem occurs, there is always the same "lock" pattern displaying in OEM:
    Username Session IdLockMode HelMode Requ Object Name ROWID Object OwnObject T Resource ID1 Resource ID2
    OWBRT92 17TM ROW SHARNONE WB_RT_SERVICE_QUEUE_TAB OWBRT92 TABLE 61161 0
    OWBRT92 17UL EXCLUSIVNONE 1073741824 0
    OWBRT92 48TM ROW SHARNONE WB_RT_NOTIFY_QUEUE_TAB OWBRT92 TABLE 61145 0
    OWBRT92 67TM ROW EXCLNONE WB_RT_NOTIFICATION_COMPONENTS OWBRT92 TABLE 61137 0
    OWBRT92 67TM ROW EXCLNONE WB_RT_NOTIFY_QUEUE_TAB OWBRT92 TABLE 61145 0
    OWBRT92 67TM ROW EXCLNONE WB_RT_NOTIFICATION_ACKS OWBRT92 TABLE 61141 0
    OWBRT92 67TM ROW SHARNONE WB_RT_NOTIFICATION_STREAMS OWBRT92 TABLE 61135 0
    OWBRT92 67TM ROW EXCLNONE WB_RT_AUDIT_EXECUTIONS OWBRT92 TABLE 61199 0
    OWBRT92 67TX EXCLUSIVNONE 262151 87564
    Session 17 is the runtime service, and these two locks are present under normal operation. Session 48 is the Sqlplus session runing the execution template, and session 67 is (i think) the session that is causing the problem.
    - The advanced queue WB_RT_NOTIFY_QUEUE tab shows "Number in state ready" equal to the number of processes still in the state "busy" i the process flow.
    - When the runtime service is stoped (using the stop_service.sql) The locking sessions disappears.
    - When the service is restarted, the processes change status to "bussy recovery" There is now a RPE-01008 and a RPE-01009 message in the "errors" section for the mapping.
    - After the failed recovery, everything looks normal, except that there are now twice the number of messages in state READY on the WB_RT_NOTIFICATION_QUEUE. The only way I have found to get rid of these is to delete them from the queue table.
    Is this a known problem? We are about to go live in a few weeks, and this could be a serious show stopper if we can't rely on the daily process flows to run as expected.
    I could log a TAR on this, but I suspect support would ask for a test case, and Im going to have a hard time providing it for them in this case.

    Jean-Pierre,
    Thanks for the update. I was afraid this was going to be one of those "hard to pinpoint" issues...
    When the problems occurs the Worflow Monitor always shows the task status as "Notified".
    The "Main routine" is no longer executing. The session that was executing the mapping has disconnected, and the mapping has completed successfully. (I have verified this by checking the rows in the target tables). Also, the problem is not restricted to mappings. Sometimes it happens to "mail notifications", and in these cases the mail message is received as expected.
    It looks to me like there is some kind of synchronization problem between AQ and the controlling process (the runtime access user session) that can arise under a given condition (which I unfortunately have not been able to determine what is). As far as I can tell, the process executing the mapping completes and puts the message that it has completed on the Notify_Queue (hence the messages in stat "Ready" on the queue), but for some reason the process waiting to read the message fails to do so.
    As for a test case, I have recently sent an export of our design repository to Igor Machin. Is it possible for you to have a look at that? As I mentioned in the first post, our Process Flows are fairly complex. Some of the flows are executing 50+ mappings in parallel.

  • WE20 - post processing: permitted agent tab

    Hi ,
    I need to create a inbound TXTRAW message type for a comapny code which I have done. Then in the screen where you give the process code , the next tab is post processing: permitted agent tab ... here my requirement is that this mail should go to a group of people ... How do I achieve that ?
    Please help.
    Thank You,
    SB.

    Hi MxG,
    I have created a Org unit "US90" ... but how do I directly assign users to that Org ? ... After creating Org ... it is only allowing to create positions .... and if I create position's (AP_US90_TXTR) and assign the users to the position ... In WE20 if I write "AP_US90_TXTR" in the agent field then it gives an error "Object type S, ID AP_US90_TXTR unknown (please observe upper/lower case)" ... So I am unable to proceed. Could you please help me?
    Thank You,
    SB.

  • Post processing errors in REM

    Hi Gurus,
    What is significance of post processing in REM?
    We have 4 options.
    1)     MF45 u2013 Post process Individual
    2)     MF46 u2013 Post process Collective
    3)     MF47 u2013 Post processing list
    4)     COGI u2013 Post processing individual Components
    I am able to use COGI and clear errors occurred in back flushing.
    But cannot under above first 3 transactions.
    System is taking to all materials where correction is needed for eg in MF47. When I select a material and change post processing record, taking me to screen of post processing list of component.
    Here I observe that bell , Batch determination and Stock determination are disabled. Where as these are enabled in COGI. What can be the reason behind? Any settings missing in REM?
    Pl. help me.
    Srini

    Hi Srini,
    To avoid this you can confirm the following things.
    1.Ensure that suffecicient stock is available in the backflushing locations of each materail.
    2.To prevent the generation of "post-processing list" you can block the BOM from getting backflushed if sufficient stock is not available in specified location for the BOM COMPONENTS. To do this change the "REM profile" to "002"in MRP4 view for the BOM MATERIAL.(if the profile is
    not available you can crate it through SPRO).
    3. To clear the existing Backlog use transcation MF47 and re-process(be ensure that required stocks is
    available for each bom component)
    Hope it will solve ur problem.
    Regards,
    R.Brahmankar

  • Post Processing Backflushing Backlogs

    Hi All,
    When I wanted to reprocess backflushing backlogs with MF45, I can not do any changes such as changing storage Location or batch number and etc because appeared post processing list  is read only. How I can change this screen from display mode to Change?
    Regards,
    Fateme Goudarzi

    Dear Fateme Goudarzi,
    1) just check ur REM profile in OSP2
    2) under Error creation for Backflushing there are two options
    Option A ) Create cumulative post processing records
    Option B ) Also create individual post processing records
    3) if option A is ticked , then Go to MF47, here u can change the Fields or clear the records
    4)  if option B is ticked, hen Go to COGI , here u can change the Fields or clear the records
    Regards
    Madhu Kumar

  • Error in Post processing of Client Copy

    Hi,
    While doing a Client copy, i am facing an error in Post Processing step.
    Its getting hanged saying:
    "Client copy is completed with status "Post-Processing Required". There is an error in log for object FINB-TR-DERIVATION"
    Please help me out of this error.
    Regards,
    Twinkle

    Hi Twinkle,
    I got the same error while doing client copy.
    During processing of client copy there was huge workload into your system. But due to workload into the system, these tables weren't created as fast as needed by Client Copy process.
    This is the reason it failed in post processing step.
    You can go thru the note 1235955.
    Hope this will solve your problem.
    Regards,
    Habeeb

Maybe you are looking for