Post Quality refresh activity in SRM
Dear Experts,
We are nearing to quality refresh in SRM7.02. I need to know the details on Post Quality refresh activity in SRM 7.02. like configuration in quality after refresh etc.
Please suggest. If you have any such documents ready please send it to my email ID:
[email protected]
Regards,
Abhishek
What exactly you want ?
Thanks
Ankit
Similar Messages
-
Hi All,
I did system refresh ( from PRD to QAS , platform Windows 2008 R2 and MSsql) the system was up and running fine. The system was absolutely fine for one day and the day after the DB crashed , not sure what happened, is there a way i can find the logs through which i can come to know what exactly happened. Also post refresh when i was trying to run BDLS , the job was getting cancelled , the job log showed there is another conversion already running , when i checked the tables the conversion had already happened . Please tell me can running BDLS which cancelled many times could be the cause for the DB crash, if yes where can i find the logs for this , if not what else could have happened that the DB crashed . Thanks for your responses in advance.
Regards
Mrigank AdityaHi Nainesh,
Thanks for the message , yes system is up and running fine , the DB team did a restore of Production data on Quality again , and i did the post refresh activities again , the issue what had happened last time was we were doing simultaneous refresh of two systems at a time , BI prod to BI qas and ECC prd to ECC qas , we had found a list of tables in BDLS which gets updated when we run BDLS and we run those tables only , unfortunately the files got exchanged , the ECC tables should have run on ECC machine and BI tables should have run on BI machine which didn't happen and it happened the other way round BI tables where run on ECC machine , due to which BDLS failed and the job got cancelled many times, which impacted the whole system conversion and logical update , which crashed the DB( i exactly don't know the reason what happened internally , still searching for it ) . At present the machine is up and running fine.
Regards
Mrigank Aditya -
Post System Refresh Activity - BDLS run
Hi,
We have finished system refresh of a QA system from Production. We need to run BDLS now to convert the original Production logical systems to QA relevant logical systems.
I am short of understanding of this process. Can anyone please help me with the concept and process?
Thanks in advance,
AbdulHi Abdul Rahim Shaik,
BDLS will convert the logical system name for your PROD to QAS.
For eg:
Your source - PRDCLNT100
Your target - QASCLNT100
If you go to SCC4 in your QAS, u will see Prod logical system name for the client.
Once you run BDLS after system copy, logical system name exist in every table for PRDCLNT 100 will change to QASCLNT100.
Refer to below link for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/33/c823dbaea911d6b29500508b6b8a93/frameset.htm
Cheers,
Nicholas Chang -
Hi All,
I am not able to process Transfer posting Quality to Quality within plant with mov type 323 through MIGO transaction.
Error : Change the inspection stock of material 936317 in QM only.(Change the inspection stock of material 936317 in QM only
Message no. QA495
Diagnosis
You want to make a stock posting to/from the inspection stock. This is not allowed for material 936317 because the quality inspection control has been activated by QM.
The following cases can occur:
The inspection stock should be increased, although an inspection is not foreseen for the current goods movement
The inspection stock should be released, although you can only do this using the QM transactions.
System response
You cannot carry out the stock posting.
Procedure
Check both the QM inspection setup data and the movement type for material 936317 in the quality management view of the material master.
Exception:
If you post a return delivery to a vendor with reference to a purchase order, or cancel a goods receipt, the stock indicator from the order is proposed.
Check and modify this proposal as required.
The stock may have been transferred already and is therefore no longer in inspection stock.
Kindly help me to resolve the issue.Hi,
Please check the stock of material 936317 in MMBE , One lot will be in Quality Inspection.
Clear the lot to unrestricted lot
try now you will be able to do Transfer posting Quality to Quality within plant ..mov type 323
G.Ganesh Kumar -
Retain background jobs and its variants before system refresh activity
Hello All,
I am going to perform system refresh activity on quaity system on monday. Customer wants to retain the background jobs and its variants in the quality system. Please guide me and let me know the steps to retain the background jobs and its variants before starting the system refresh activity.
Regards
SubbuDear Subbu,
You have to export the TBT* Tables to retain the jobs. You can do this with R3trans:
1. Make Export file
2. Make Import file
3. Make Export in Q System before Systemcopy
4. Start Database and not SAP
5. Make Import in Q after Systemcopy
6. Start sap
1. Make Export file /tmp/export_cmd
export
file='/tmp/export_Q.dmp'
client=<your client>
delete from TBTCA
delete from TBTCB
delete from TBTCCNTXT
delete from TBTCCTXTT
delete from TBTCCTXTTP
delete from TBTCI
delete from TBTCJCNTXT
delete from TBTCJSTEP
delete from TBTCO
delete from TBTCO_V01
delete from TBTCP
delete from TBTCPV
delete from TBTCR
delete from TBTCS
delete from TBTC_SPOOLID
delete from BTCEVTJOB
select * from TBTCA
select * from TBTCB
select * from TBTCCNTXT
select * from TBTCCTXTT
select * from TBTCCTXTTP
select * from TBTCI
select * from TBTCJCNTXT
select * from TBTCJSTEP
select * from TBTCO
select * from TBTCO_V01
select * from TBTCP
select * from TBTCPV
select * from TBTCR
select * from TBTCS
select * from TBTC_SPOOLID
select * from BTCEVTJOB
2. Make Import file /tmp/import_cmd
import
file='/tmp/export_Q.dmp'
3. Make Export in Q System before Systemcopy
R3trans -w /tmp/Q_export.log /tmp/export_cmd
4. Start Database and not SAP
sqlplus "/as sysdba"
SQL> startup
or
startsap
stopsap r3
5. Make Import in Q after Systemcopy
R3trans -w /tmp/Q_import.log /tmp/import_cmd
If you want to undo this, start the export script in P system and the Import script in Q system.
Don't be afraid of the delete statement but without delete it doesn't work!
6. Start sap
startsap
Best regards
Willi Eimler -
System copy post DB refresh error
Hi,
I am doing a post db refresh (Oracle/Solaris) and while creating control file getting error
SQL> CREATE CONTROLFILE SET DATABASE "XXX" RESETLOGS ARCHIVELOG;
CREATE CONTROLFILE SET DATABASE "XXX" RESETLOGS ARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file '?/dbs/[email protected]'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ALSO
SQL> startup nomount
ORACLE instance started.
Total System Global Area 2214592512 bytes
Fixed Size 2053640 bytes
Variable Size 1174407672 bytes
Database Buffers 1006632960 bytes
Redo Buffers 31498240 bytes
SQL> @control.sql
SP2-0310: unable to open file "control.sql"
Please help.Hi Anshul,
First please refer System copy guide for successful procedure http://www.basisconsultant.com/j/index.php?option=com_k2&view=item&layout=item&id=1&Itemid=185 .In addition please follow SAP Note 546006 - Problems with Oracle due to operating system errors
and try to execute SQL command create spfile from pfile ; ( ORA-01565: error in identifying file &#8216;?/dbs/[email protected] )
Regards,
Gaurav -
Post system refresh, "Request IDoc : IDoc with errors added"
Hello All,
Post system refresh, we are not able to execute the data loads.
While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
However, transaction loads (delta) is facing issues.
Today, we are facing the problem in both master and transaction data.
Please help!!!! Its a very critical issue!!!
Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AMHi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha -
IDOC Tables with Errors Post System Refresh
Hi Everyone,
Is there any Report or other way through which one can get List of IDOC Tables with Errors Post System Refresh.
Thanks,
Regards,
- IshanHi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha -
System refresh activity in Development Box
Hi Guru's
I have requirement for system refresh activity in development system and i would like to know what are pre-activity required for this other than when compared to normal system refresh and also please share me any link or snote related to this
Regard
Mohammed SayeedHi,
This is SAP business one system administration forum. Please find correct forum and repost your question to get quick reply.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan -
Hi Gurus,
I am doing a schema refresh activity from Production db to Test db.
In PRODUCTION, I have a schema called LMS which has default tablespace as LMS and temporary TEMP.
In TEST schema is LMSTEST and it;s default tablespace and temporary tablespace is LMSTEST and TEMP respectively.
But;there is also a tablespace called LMS in TEST database.
I have dropped the user from TEST
created a user with same name
given default and temporary tablespace as LMSTEST and TEMP
given default roles to that users
given system privileges as well...
My poblem is while importing,my data is getting inserted into LMS where as it should go in LMSTEST as i made it default tablespace. Why it has happpened?????
I have also made quota zero on LMS in TEST database ,but still the data is getting inserted into LMS in tablespace and not in LMSTEST tablespace.....
Edited by: user13299764 on Aug 4, 2010 2:51 AMIn export/import utility the data to the target database goes to the same tablespace while doing import as it was in the source database tablespace.In your case LMS tablespace.so follow the below steps.
1.Either assign LMS as default tablespace to LMSTEST user.
or
2.After the import is over move all tables to the LMSTEST tablespace and rebuild the index on LMSTEST tablespace.
or
3.Take export using datapump and while import use remap_tablespace option. -
Does any body have a clear explanation for the system refresh activity.
and is System copy and refresh one and the same
if some one has steps please send them to me
thank uPavan ,
when you are performing the client copy you are coping the tables and indexes.
if your system have different patch level i way cause inconsistancy while client copy.
Please check this forun to clear the situation
Re: Error in Remote Client Copy
thanks
Rishi Abrol -
HI Gurus,
I am taking online + redolog backup of my production system and offline backup of Quality system.
Now I am going to do the quality refresh by restoring the backup of production system into Quality system.
Our backup is taken using Tivoli Server.
Please guide me how to carry forward the task
Before starting restoration I have to change Quality system to Online mode?
Thanks in advance !!!
Biswajit
9765404752Hi,
Read system copy guide for database specific method - backup/restore on http://service.sap.com/instguides.
Thanks
Sunny -
Can any 1 help reg Post system refersh activity
Hi
can any one help me regarding post system refersh activity?
Regards,
SivaHi,
license the machine,run se06,check the stms config,reasign logical systems,number ranges of the transport requests,recreate fax and mailing list,check printers,ditribution models,RFC,mailing list...
Regards
Umesh -
How can we automate the Post system refresh activities
All,
Just want to know if there is a way to automate most of the post system refresh activities that were done by Basis.
Please note that i am talking about Post System refresh activities.
Appreciate your responses.
Thanks,
GiriIt all depends on what you would like to do: you keep the same SID or is it a rename?
- you could plan 1 jobs on production after event 'Zafterrefresh" with following steps:
that runs a BDLS
that does a cleanup of the spools
cleanup application logs
Trigger the event after the refresh and that starts.
Depending on your system you can run multiple jobs in //
some actions will have to be done manually:
user import
TMS config
etc -
SICF Services to be activated for SRM 7.0
Hi Guys,
I am collecting list of all SICF services to be activated for SRM7.0
1) SAP -->BC -->WebDynpro -->sapsrm --> activate all services
2) SAP -->SAPSRM --> activate all services
3) SAP -->BC -->WebDynpro >SAP> POWL --> Activate services
4) SAP -->BC -->bsp -->sapsrm --> Activate services
Apart from this are there any other services to be activated for SRM 7.0?
Regards,
Ashish ShahHi Ashish,
Why dont you use the standard report W3PUBLISHALL for activating alll the SICF at once .. No harm in Publishing all SICF pages in SRM 7.0
Thanks
Iftekhar Alam
Maybe you are looking for
-
ASA 5505 + ASA 5540 static VPN, ssh and rdp problems
Greetings! I've recentely set up a VPN between Cisco ASA 5540(8.4) ana 5505(8.3). Everything works fine, but there is a small problem that is really annoying me. From the inside network behind ASA 5505 I connect via rdp or ssh to a host inside ASA 55
-
How do I stop NEF images changing colour when I click on them in adobe bridge
Windows 7 Photoshop CS3 Nikon DX40 Photos shot as NEF files I am experiencing a problem when I look at my NEF images in Adobe Bridge. When I load them in and look at the thumb nails without clicking on them or opening them, the images look fine. As s
-
I cannot access the notification center on my iPhone! Help!
I cannot access the notification center on my iPhone when it is in portrait orientation! Help! This just started to occur after I installed iOS 7.
-
i just got a macbook(black version) and it came with OS X Snow Leopard. i was wondering where i can get the OS X Lion update since mountain lion is not compatible with my computer. Can someone help please.
-
How to implement dll hotswapping?
I need to create a program that can load dlls, execute their code and then unload them again, so new versions of the dlls can be used instead at a later time. The program needs to be able handle several threads (possibly many) at the same time, each