Post referesh activity..
Hi All,
I need to perform System refresh on BI quality system can anybody provide be explained document on pre and post refresh activities .
thanks
kamal....
Hi Kamal.
Pls refer below link
http://forums.sdn.sap.com/search.jspa?threadID=1692158&q=PRE-postActivitiesTobeperfromedduringsystem+refresh&objID=&dateRange=last90days&numResults=15&rankBy=10001
It may help you a bit.
Thanks
Nilesh
Similar Messages
-
BW on HANA : Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.
We are trying to copy database from SAP BW7.0 to SAP BW on HANA 7.4 SPS6 so we are in search for list of steps or activities during database copy both pre and post steps.
Along with the above we are in search of Pre and post migration steps ones database is transferred successfully from oracle to HANA on 7.4 SPS6.
Kindly help us in getting the exact course of action as requested.
Thanks and Regards,
Lavina JoshiHi Lavina,
try this link for starters: Upgrade and Migration - BW on HANA | SAP HANA
Points to remember are:
Preparation:
-- Hardware Sizing
-- Preparation of Data Centres
-- HANA Hardware preparation
-- System Landscape Readiness (upgrade software downloads, system readiness checks, etc)
-- House Keeping activities on BW system (data clean up, etc)
Post Installation:
-- Sanity checks / Preparation and License checks
-- JAVA Configurations
-- Infoprovider conversions
Overall Stages are described below:
# Environmental setup (HANA box)
-- Initial system checks and Building Activities (system copy, Appln server setups, etc)
# System readiness
- ZBW_HANA_COCKPIT Tool
- ZBW_HANA_CHECKLIST Tool
- ZBW_ABAP_ANALYZER Tool
- ZBW_TRANSFORM_FINDER Tool
- SIZING Report
- System Clean up Activities
- Impact of 7.4 on source system checks
- Java Upgrade for portal
# DMO Stages
- Preparation & Pre Migration checks
- Execution / Migration
- Post Migration Activities
# Testing Phase
- Source system checks/Activities
- System and Integration Testing
- End to End Testing
- Performance testing
- Reports
- BO reports / Interfaces
Do let me know if you require any further information.
Regards,
Naren -
Post Upgrade Activity: db6_update_db script
Hi Experts,
I've already upgraded db2 version from 9.1 to 9.7 but I am stuck in post upgrade activity where I need to run the db6_update_db script.
Question to this procedure: "Copy the file db6_update_db.bat (Windows) from the relevant operating system folder on the database DVD to a temporary directory (<temp_dir>)."
Is the <temp_dir> can be any directory? If not, what specific directory that I need to save the db6_update_db script?
I've tried to create a directory and save the script but when I issue the command I've got this error:
JAVA could not be found on the maschine
Please make sure that the DB2PATH environment variable is set to the installation directory of the DB2 software or set DB6_UPDATE_DB_JAVA to the full qualified path of your java.exe
I've tried this with different access like administrator, db2<dbsid> and <sapsid>adm but I have no luck.
Can anyone help me?
Regards,
ChonalynHi Chonalyn,
Have a look at this note:
1304436 - DB6: Documentation for db6_update_db scripts
Regards,
Hugo -
EHP5 post installation activity
Dear All,
We have upgraded our DEV server to EHP5, but we have following queries. We are using SUSE Linux 11 and DB2 9.1 data base.
In system -> Status - > SAP system data -> component version "SAP ECC 6.0"
System Component Information -> EA-APPL = 605, SAP-APPL = 605, EA-HR* = 605 etc
1. Is there any procedure to validate our installation is complete and doesn't require any more changes, during installation we didn't give any transport request? post intallation activity, if required.
2. We are facing following issues in DBACockpit transaction, what is the solution to remove these errors?
Space -> virtual tables
@5D\QYellow LED; caution@ DEV Last data collector run is older than 14 days
@8O\QError message@ DEV SQL0204N "SAPTOOLS.DBH_STG_TABLE" is an undefined name.
SQLSTATE=42704
Configuration -> parameter check
@5C\QRed LED; stop; errors@ DEV Error when reading SAP Note 0001334923: Return code = 1. mentioned note is not understandable.
3. During Pre processing phase installer recommended some manual changes in database, some tablespaces were manually created i.e. DEV#EL702D, DEV#EL702I, DEV#ES702D, DEV#ES702I. Do we need to drop these tablespaces or keep it as it is?Hi,
> In system -> Status - > SAP system data -> component version "SAP ECC 6.0"
> System Component Information -> EA-APPL = 605, SAP-APPL = 605, EA-HR* = 605 etc
>
> 1. Is there any procedure to validate our installation is complete and doesn't require any more changes, during installation we didn't give any transport request? post intallation activity, if required.
>
This is correct. Even if system it upgraded to EHP4/EHP5, it will show you as ECC 6.0. You can confirm this by seeing version of the component. For a system to be called on EHP5, SAP_APPL and EA-APPL must be on EHP5. And additionally if you have installed any other usage type, you can also check its version to EHP5.
> 2. We are facing following issues in DBACockpit transaction, what is the solution to remove these errors?
>
> Space -> virtual tables
> @5D\QYellow LED; caution@ DEV Last data collector run is older than 14 days
> @8O\QError message@ DEV SQL0204N "SAPTOOLS.DBH_STG_TABLE" is an undefined name.
> SQLSTATE=42704
>
> Configuration -> parameter check
> @5C\QRed LED; stop; errors@ DEV Error when reading SAP Note 0001334923: Return code = 1. mentioned note is not understandable.
>
For this, you can refer to SAP note 1554750.
> 3. During Pre processing phase installer recommended some manual changes in database, some tablespaces were manually created i.e. DEV#EL702D, DEV#EL702I, DEV#ES702D, DEV#ES702I. Do we need to drop these tablespaces or keep it as it is?
No, these are new containers of 702 release. You cannot drop it.
Thanks
Sunny -
BW 7.0 to 7.3 upgrade-Post upgrade activity and Transport the changes
Hi Experts,
We have upgraded our BW system from Release 7.0 to 7.3. As part of Security post upgrade activity I ran Migration steps,
RSECADMIN-Extras->Migrations->Migration:Release 7.0 to Release 7.3. and later SU25 steps too.
I fixed the Roles appeared in SU25 Step 2C and made below Characteristics as auth relevant,
0TCAACTVT
0TCAIPROV
0TCAVALID
But I have few doubts before Quality movement,
1) Do I need to Run the Migration steps again in Quality and Production?
RSECADMIN-Extras->Migrations->Migration:Release 7.0 to Release 7.3
2) Do I need to transport only above Characteristics to Quality and Production or need to transport all the Characteristics and Analysis Authorization?
3) How to transport Characteristics?
Please provide your views.
Regards
ParagHi,
Technically its possible but it has its own consequences again based on the kind of object that you are going to Tranport.
The above statement is applicable considering that you have 3.x flow in Bi7.0 system and with no DTP's or transformation etc...
And if the BI7.0 is Unicode and 3.5 system is non-unicode then you will have lot of issues and most of the times you need Basis help to resolve the issues. So its bit risk to move the transport this way.
So its better to develop the objects once again in 3.x system and then transport from D to Q and to P as a standard practice.
Hope this helps.
Murali -
Collective Confirmation and Posting of Activity Types in REM
Hi everybody:
I'm confirming Fert items by the MF42N in REM and, i've a Repetitive Manufacturing Profile with GI backflush at GR posting activated as well as Post Activities with Using data from prelim. costing f. prod. cost collector but, in the product cost collector they are not updated (the activities) because the materials movements yes.
When i confirm by the MF42N but with "Post with corrections" and i mark the Activities, it's all right.
I need to do this posting of my activities in automatic way with de MF42N without "post with corrections".
somebody can help me please?
Thanks
Omar PereaMr Prabakaran:
Thanks for your help, I reviewed my Profile for REM, your advice was good, but, i need the next:
I need that the posting for the activities will be in automatic, just with the confirmation, that is to say, i've in my routing the times for these activities originating from my Work center, but... when i do the confirmation (MF42N) just the materials are doing the respective GI & GR, but not the activities, then i go to the MFBF and select the Confirmation for Activities for posting it and all right, so this do not is useful for me, i want not go to the MFBF nor to "post with Corrections" in the MF42N
Would you help me whit this? If you wish i can send you in a e-mail some screens of my case.
thank you in advance -
SCM Dialog instance installation, post installation activity for livecache
Hi All,
We have installed SCM 7.0 Central instance with Livecache server. Now we have successfully installed additional application server (i.e. Dialog instance) for this SCM 7.0 system.
We need to know
After installation of SCM 7.0 Dialog instance what are the post installation activities?
How we should integrate the livecache server with the Dialog instance which is installed on different hardware.
We need to know how livecache server understand that the additonal application server ? Is there anything to do in LC10?
Please reply
ThanksHi Ashley,
Thanks for your time.
Since i am installing app server, the SAP<SID> group will have to be online on this node. There is another group containing shared drives for components for livecache. This is also required to be online on node 2 for app server installation.
The only cluster resource I can move back to node 1 is ORACLE<SID>. Tried doing that, but no luck.
Any one here facing similar issue during SCM dialog instance installation in MSCS environment?
Regards,
Kiran -
Direct Activity Allocation posting
Hi,
Is there a way to validate posting for activity type & order (order must be linked with activity type) in direct activity allocation (KB21N)?
Thank youyour question is not clear
check the link to understand the purpose of KB21n
kb21n overhead cost
Regards,
Divraj -
Post server reboot , instance 1 crashes on starting the second one
Hi ,
We had a server reboot ( Solaris SPARC 64 bit) and had to shutdown the application running on RAC system on 2 servers.
now post the activity , we are trying to bring up the instances but whenever one comes up the other goes down.
If we try to start the second one , first goes down.
Oracle database version : 10.2.0.3.0
Alert logs for both have been mentioned below :
instance1:
Mon Jul 23 16:17:22 2012
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 bge3 10.0.0.0 configured from OCR for use as a cluster interconnect
Interface type 1 bge0 58.2.35.0 configured from OCR for use as a public interface
Interface type 1 bge1 58.2.35.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/orainf/product/10.2.0/dbs/arch
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 400
__shared_pool_size = 956301312
shared_pool_size = 201326592
__large_pool_size = 16777216
__java_pool_size = 150994944
java_pool_size = 150994944
__streams_pool_size = 16777216
streams_pool_size = 16777216
sga_target = 1610612736
control_files = /db01/asdb/asdb/control01.ctl, /db01/asdb/asdb/control02.ctl, /db01/asdb/asdb/control03.ctl
db_block_size = 8192
__db_cache_size = 452984832
db_cache_size = 167772160
compatible = 10.2.0.3.0
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
thread = 1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
ldap_directory_access = PASSWORD
remote_login_passwordfile= EXCLUSIVE
db_domain = intranet.genpact.com
remote_listener = LISTENERS_ASDB
job_queue_processes = 10
background_dump_dest = /u01/app/orainf/admin/asdb/bdump
user_dump_dest = /u01/app/orainf/admin/asdb/udump
core_dump_dest = /u01/app/orainf/admin/asdb/cdump
audit_file_dest = /u01/app/orainf/admin/asdb/adump
db_name = asdb
open_cursors = 300
pga_aggregate_target = 848297984
aq_tm_processes = 1
Mon Jul 23 16:17:24 2012
Oracle instance running with ODM: Veritas 5.0.30.00 ODM Library, Version 1.1
cluster interconnect IPC version:
VERITAS IPC '5.0MP3' 07:30:15 Jul 29 2008
IPC Vendor 86 proto 76
Version 1.0
PMON started with pid=2, OS id=17279
DIAG started with pid=3, OS id=17281
Mon Jul 23 16:17:24 2012
Errors in file /u01/app/orainf/admin/asdb/bdump/asdb1_diag_17281.trc:
ORA-07445: exception encountered: core dump [_kill()+8] [SIGIOT] [unknown code] [0x438100000000] [] []
PSP0 started with pid=4, OS id=17283
LMON started with pid=5, OS id=17285
LMD0 started with pid=6, OS id=17287
LMS0 started with pid=7, OS id=17289
LMS1 started with pid=8, OS id=17293
MMAN started with pid=9, OS id=17297
DBW0 started with pid=10, OS id=17299
LGWR started with pid=11, OS id=17301
CKPT started with pid=12, OS id=17303
SMON started with pid=13, OS id=17333
RECO started with pid=14, OS id=17338
CJQ0 started with pid=15, OS id=17340
MMON started with pid=16, OS id=17342
MMNL started with pid=17, OS id=17344
Mon Jul 23 16:17:26 2012
Errors in file /u01/app/orainf/admin/asdb/bdump/asdb1_lmon_17285.trc:
ORA-27550: Target ID protocol check failed. tid vers=%d, type=%d, remote instance number=%d, local instance number=%d
Mon Jul 23 16:17:26 2012
LMON: terminating instance due to error 27550
Instance terminated by LMON, pid = 17285
Mon Jul 23 16:18:33 2012
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 bge3 10.0.0.0 configured from OCR for use as a cluster interconnect
Interface type 1 bge0 58.2.35.0 configured from OCR for use as a public interface
Interface type 1 bge1 58.2.35.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/orainf/product/10.2.0/dbs/arch
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 400
__shared_pool_size = 956301312
shared_pool_size = 201326592
__large_pool_size = 16777216
__java_pool_size = 150994944
java_pool_size = 150994944
__streams_pool_size = 16777216
streams_pool_size = 16777216
sga_target = 1610612736
control_files = /db01/asdb/asdb/control01.ctl, /db01/asdb/asdb/control02.ctl, /db01/asdb/asdb/control03.ctl
db_block_size = 8192
__db_cache_size = 452984832
db_cache_size = 167772160
compatible = 10.2.0.3.0
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
thread = 1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain = intranet.genpact.com
job_queue_processes = 10
background_dump_dest = /u01/app/orainf/admin/asdb/bdump
user_dump_dest = /u01/app/orainf/admin/asdb/udump
core_dump_dest = /u01/app/orainf/admin/asdb/cdump
audit_file_dest = /u01/app/orainf/admin/asdb/adump
db_name = asdb
open_cursors = 300
pga_aggregate_target = 848297984
aq_tm_processes = 1
Mon Jul 23 16:18:35 2012
Oracle instance running with ODM: Veritas 5.0.30.00 ODM Library, Version 1.1
cluster interconnect IPC version:
VERITAS IPC '5.0MP3' 07:30:15 Jul 29 2008
IPC Vendor 86 proto 76
Version 1.0
PMON started with pid=2, OS id=19523
DIAG started with pid=3, OS id=19525
Mon Jul 23 16:18:36 2012
Errors in file /u01/app/orainf/admin/asdb/bdump/asdb1_diag_19525.trc:
ORA-07445: exception encountered: core dump [_kill()+8] [SIGIOT] [unknown code] [0x4C4500000000] [] []
PSP0 started with pid=4, OS id=19527
LMON started with pid=5, OS id=19529
LMD0 started with pid=6, OS id=19531
LMS0 started with pid=7, OS id=19533
LMS1 started with pid=8, OS id=19537
MMAN started with pid=9, OS id=19557
DBW0 started with pid=10, OS id=19573
LGWR started with pid=11, OS id=19576
CKPT started with pid=12, OS id=19578
SMON started with pid=13, OS id=19580
RECO started with pid=14, OS id=19582
CJQ0 started with pid=15, OS id=19584
MMON started with pid=16, OS id=19586
MMNL started with pid=17, OS id=19588
Mon Jul 23 16:18:37 2012
Errors in file /u01/app/orainf/admin/asdb/bdump/asdb1_lmon_19529.trc:
ORA-27550: Target ID protocol check failed. tid vers=%d, type=%d, remote instance number=%d, local instance number=%d
Mon Jul 23 16:18:37 2012
LMON: terminating instance due to error 27550
Instance terminated by LMON, pid = 19529
Mon Jul 23 16:20:16 2012
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 bge3 10.0.0.0 configured from OCR for use as a cluster interconnect
Interface type 1 bge0 58.2.35.0 configured from OCR for use as a public interface
Interface type 1 bge1 58.2.35.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/orainf/product/10.2.0/dbs/arch
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 400
__shared_pool_size = 956301312
shared_pool_size = 201326592
__large_pool_size = 16777216
__java_pool_size = 150994944
java_pool_size = 150994944
__streams_pool_size = 16777216
streams_pool_size = 16777216
sga_target = 1610612736
control_files = /db01/asdb/asdb/control01.ctl, /db01/asdb/asdb/control02.ctl, /db01/asdb/asdb/control03.ctl
db_block_size = 8192
__db_cache_size = 452984832
db_cache_size = 167772160
compatible = 10.2.0.3.0
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
thread = 1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
db_domain = intranet.genpact.com
job_queue_processes = 10
background_dump_dest = /u01/app/orainf/admin/asdb/bdump
user_dump_dest = /u01/app/orainf/admin/asdb/udump
core_dump_dest = /u01/app/orainf/admin/asdb/cdump
audit_file_dest = /u01/app/orainf/admin/asdb/adump
db_name = asdb
open_cursors = 300
pga_aggregate_target = 848297984
Mon Jul 23 16:20:18 2012
Oracle instance running with ODM: Veritas 5.0.30.00 ODM Library, Version 1.1
cluster interconnect IPC version:
VERITAS IPC '5.0MP3' 07:30:15 Jul 29 2008
IPC Vendor 86 proto 76
Version 1.0
PMON started with pid=2, OS id=22860
DIAG started with pid=3, OS id=22870
Mon Jul 23 16:20:18 2012
Errors in file /u01/app/orainf/admin/asdb/bdump/asdb1_diag_22870.trc:
ORA-07445: exception encountered: core dump [_kill()+8] [SIGIOT] [unknown code] [0x595600000000] [] []
PSP0 started with pid=4, OS id=22888
LMON started with pid=5, OS id=22892
LMD0 started with pid=6, OS id=22899
LMS0 started with pid=7, OS id=22901
LMS1 started with pid=8, OS id=22905
MMAN started with pid=9, OS id=22909
DBW0 started with pid=10, OS id=22911
LGWR started with pid=11, OS id=22913
CKPT started with pid=12, OS id=22915
SMON started with pid=13, OS id=22917
RECO started with pid=14, OS id=22919
CJQ0 started with pid=15, OS id=22921
MMON started with pid=16, OS id=22923
MMNL started with pid=17, OS id=22933
Mon Jul 23 16:20:20 2012
Errors in file /u01/app/orainf/admin/asdb/bdump/asdb1_lmon_22892.trc:
ORA-27550: Target ID protocol check failed. tid vers=%d, type=%d, remote instance number=%d, local instance number=%d
Mon Jul 23 16:20:20 2012
LMON: terminating instance due to error 27550
Instance terminated by LMON, pid = 22892instance 2:
Mon Jul 23 16:20:30 2012
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 bge3 10.0.0.0 configured from OCR for use as a cluster interconnect
WARNING 10.0.0.0 could not be translated to a network address error 1
Interface type 1 bge0 58.2.35.0 configured from OCR for use as a public interface
Interface type 1 bge1 58.2.35.0 configured from OCR for use as a public interface
WARNING: No cluster interconnect has been specified. Depending on
the communication driver configured Oracle cluster traffic
may be directed to the public interface of this machine.
Oracle recommends that RAC clustered databases be configured
with a private interconnect for enhanced security and
performance.
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/orainf/product/10.2.0/dbs/arch
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 400
__shared_pool_size = 721420288
shared_pool_size = 201326592
__large_pool_size = 16777216
__java_pool_size = 150994944
java_pool_size = 150994944
__streams_pool_size = 16777216
streams_pool_size = 16777216
spfile = /db01/asdb/asdb/spfileasdb.ora
sga_target = 1610612736
control_files = /db01/asdb/asdb/control01.ctl, /db01/asdb/asdb/control02.ctl, /db01/asdb/asdb/control03.ctl
db_block_size = 8192
__db_cache_size = 687865856
db_cache_size = 167772160
compatible = 10.2.0.3.0
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
thread = 2
instance_number = 2
undo_management = AUTO
undo_tablespace = UNDOTBS2
ldap_directory_access = PASSWORD
remote_login_passwordfile= EXCLUSIVE
db_domain = intranet.genpact.com
dispatchers = (PROTOCOL=TCP) (SERVICE=asdbXDB)
remote_listener = LISTENERS_ASDB
job_queue_processes = 10
background_dump_dest = /u01/app/orainf/admin/asdb/bdump
user_dump_dest = /u01/app/orainf/admin/asdb/udump
core_dump_dest = /u01/app/orainf/admin/asdb/cdump
audit_file_dest = /u01/app/orainf/admin/asdb/adump
db_name = asdb
open_cursors = 300
pga_aggregate_target = 848297984
aq_tm_processes = 1
Cluster communication is configured to use the following interface(s) for this instance
58.2.35.93
Mon Jul 23 16:20:32 2012
Oracle instance running with ODM: Veritas 5.0.30.00 ODM Library, Version 1.1
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=28537
DIAG started with pid=3, OS id=28539
PSP0 started with pid=4, OS id=28541
LMON started with pid=5, OS id=28543
Mon Jul 23 16:20:33 2012
WARNING: Failed to set buffer limit on IPC interconnect socket
Oracle requires that the SocketReceive buffer size be tunable upto 1MB
Please make sure the kernel parameterwhich limits SO_RCVBUF value set by
applications is atleast 1MB
LMD0 started with pid=6, OS id=28545
LMS0 started with pid=7, OS id=28547
LMS1 started with pid=8, OS id=28551
MMAN started with pid=9, OS id=28555
DBW0 started with pid=10, OS id=28557
LGWR started with pid=11, OS id=28567
CKPT started with pid=12, OS id=28587
SMON started with pid=13, OS id=28594
RECO started with pid=14, OS id=28596
CJQ0 started with pid=15, OS id=28599
MMON started with pid=16, OS id=28605
MMNL started with pid=17, OS id=28608
Mon Jul 23 16:20:34 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Mon Jul 23 16:20:34 2012
lmon registered with NM - instance id 2 (internal mem no 1)
Mon Jul 23 16:20:35 2012
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
1
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Mon Jul 23 16:20:35 2012
LMS 0: 0 GCS shadows cancelled, 0 closed
Mon Jul 23 16:20:35 2012
LMS 1: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Mon Jul 23 16:20:35 2012
LMS 1: 0 GCS shadows traversed, 0 replayed
Mon Jul 23 16:20:35 2012
LMS 0: 0 GCS shadows traversed, 0 replayed
Mon Jul 23 16:20:35 2012
Submitted all GCS remote-cache requests
Fix write in gcs resources
Reconfiguration complete
LCK0 started with pid=20, OS id=28770
Mon Jul 23 16:20:36 2012
ALTER DATABASE MOUNT
Mon Jul 23 16:20:36 2012
This instance was first to mount
Setting recovery target incarnation to 2
Mon Jul 23 16:20:40 2012
Successful mount of redo thread 2, with mount id 2392310356
Mon Jul 23 16:20:40 2012
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Completed: ALTER DATABASE MOUNT
Mon Jul 23 16:20:40 2012
ALTER DATABASE OPEN
This instance was first to open
Mon Jul 23 16:20:40 2012
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Mon Jul 23 16:20:41 2012
Started redo scan
Mon Jul 23 16:20:41 2012
Completed redo scan
509 redo blocks read, 149 data blocks need recovery
Mon Jul 23 16:20:41 2012
Started redo application at
Thread 2: logseq 1492, block 3
Mon Jul 23 16:20:41 2012
Recovery of Online Redo Log: Thread 2 Group 7 Seq 1492 Reading mem 0
Mem# 0: /db01/asdb/asdb/redo07a.log
Mem# 1: /db01/asdb/asdb/redo07b.log
Mon Jul 23 16:20:41 2012
Completed redo application
Mon Jul 23 16:20:41 2012
Completed crash recovery at
Thread 2: logseq 1492, block 512, scn 10435264045528
149 data blocks read, 149 data blocks written, 509 redo blocks read
Picked broadcast on commit scheme to generate SCNs
Mon Jul 23 16:20:42 2012
Thread 2 advanced to log sequence 1493
Thread 2 opened at log sequence 1493
Current log# 8 seq# 1493 mem# 0: /db01/asdb/asdb/redo08a.log
Current log# 8 seq# 1493 mem# 1: /db01/asdb/asdb/redo08b.log
Successful open of redo thread 2
Mon Jul 23 16:20:42 2012
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Jul 23 16:20:42 2012
SMON: enabling cache recovery
Mon Jul 23 16:20:42 2012
Successfully onlined Undo Tablespace 5.
Mon Jul 23 16:20:42 2012
SMON: enabling tx recovery
Mon Jul 23 16:20:43 2012
Database Characterset is AL32UTF8
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=24, OS id=29088
Mon Jul 23 16:20:46 2012
Completed: ALTER DATABASE OPENPlease suggest
Regards
KKHi ,
I have used the command ifconfig -a
below is the output :
chaning the original IP's with alphabets for security concerns
instance 1:
bash-2.05$ ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet XY.M.CD.93 netmask ffffff00 broadcast XY.M.CD.255
groupname orapub
bge0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 2
inet XY.M.CD.94 netmask ffffff00 broadcast XY.M.CD.255
bge0:3: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4> mtu 1500 index 2
inet XY.M.CD.151 netmask ffffff00 broadcast XY.M.CD.255
bge1: flags=39040803<UP,BROADCAST,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,FAILED,STANDBY> mtu 1500 index 3
inet XY.M.CD.95 netmask ffffff00 broadcast XY.M.CD.255
groupname orapub
bge2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
inet ZZ.0.0.1 netmask ff000000 broadcast ZZ.255.255.255
bge3: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
inet 0.0.0.0 netmask 0instance 2:
bash-2.05$ ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet XY.M.CD.96 netmask ffffff00 broadcast XY.M.CD.255
groupname orapub
bge0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 2
inet XY.M.CD.97 netmask ffffff00 broadcast XY.M.CD.255
bge0:2: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4> mtu 1500 index 2
inet XY.M.CD.152 netmask ffffff00 broadcast XY.M.CD.255
bge1: flags=69040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,STANDBY,INACTIVE> mtu 1500 index 3
inet XY.M.CD.98 netmask ffffff00 broadcast XY.M.CD.255
groupname orapub
bge3: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
inet 0.0.0.0 netmask ff000000
bge3:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
inet 10.0.0.3 netmask ff000000 broadcast ZZ.255.255.255Regards -
Function modules or BAPI for posting plan costs for WBS Element
Hi all,
Does anyone know, whether there exists a function module or BAPI for posting plan costs to a WBS Element? K_COSTS_PLAN_PS does not work, because RKP1 is not allowed.
Greetingscheck
BAPI_COSTACTPLN_POSTACTINPUT Activity Input Planning: Posting
BAPI_COSTACTPLN_POSTACTOUTPUT Activity/Price Planning: Posting
BAPI_COSTACTPLN_POSTKEYFIGURE Stat. Key Figure Planning: Postings
BAPI_COSTACTPLN_POSTPRIMCOST Primary Cost Planning: Postings
BAPI_PDTRANSCO_POSTPRIMCOST Transfer of Planning Data: Post Primary Costs
K40C CO Actual Postings, Manual
BAPI_ACC_PRIMARY_COSTS_POST Accounting: Post Primary Costs
BAPI_COPAACTUALS_POSTCOSTDATA BAPI Operating Concern: Post Costing-Based Actua
BAPI_PRIM_COST_CHECK_AND_POST Primary Costs: Formal Parameter Check
S@meer -
I believe I run across a TDMS-related issue. I have been rolling out ERP SPS 9 to all ERP systems. I am now down to the final system, our training system. While importing the support packs, I get the following errors:
Field ARCH_XHOME-ROWID does not exist
Key field ARCH_XHOME-FILENAME missing. Specify maintenance status 'read only'.
Field BWFS_SETTINGS_0D-ROWID does not exist
Key field BWFS_SETTINGS_0D-INFOSOURCE missing. Specify maintenance status 'read only'.
Field HRP1008-ROWID does not exist
Key field HRP1008-BEGDA missing. Specify maintenance status 'read only'.
Key field HRP1008-ENDDA missing. Specify maintenance status 'read only'.
Key field HRP1008-ISTAT missing. Specify maintenance status 'read only'.
Key field HRP1008-OBJID missing. Specify maintenance status 'read only'.
Key field HRP1008-OTYPE missing. Specify maintenance status 'read only'.
Key field HRP1008-PLVAR missing. Specify maintenance status 'read only'.
Key field HRP1008-SEQNR missing. Specify maintenance status 'read only'.
Key field HRP1008-SUBTY missing. Specify maintenance status 'read only'.
Key field HRP1008-VARYF missing. Specify maintenance status 'read only'.
View /TDM/9_200C00643 could not be activated
View /TDM/9_200C00644 could not be activated
View /TDM/9_200C00645 could not be activated
View /TDM/9_200C00798 could not be activated
View /TDM/9_200C00965 could not be activated
View /TDM/9_200C01701 could not be activated
View /TDM/9_200C01846 could not be activated
View /TDM/9_200C01848 could not be activated
View /TDM/9_200C02737 could not be activated
View /TDM/9_200C03032 could not be activated
View /TDM/9_200C04033 could not be activated
View /TDM/9_200C04041 could not be activated
After some looking through SDN and OSS messages, I found a relevant posting (DDIC ACTIVATION ERROR) but no solution. I have submitted a message to SAP but since I'm under a time limit, I need to use all available resources to resolve.
I suspect these issues are a result of TDMS. Client 200 is the target of a TDMS copy. We have dropped this client for now just to see if that resolves the issue, but it did not as we expected. I suspect there is something in the TDMS controller that we need to do to "release" this system as a target but we're just now evaluating TDMS and are not experts. Any suggestions?Hi,
To resolve the mentioned problem please follow the instructions
given in following SAP note :
1020887 - Generated views in receiver system not deleted correctly.
Follow the instructions as mentioned in the note properly.
Thanks,
Rupam -
Hello all,
This topic might have been talked about before but after a lot of searching I still have not found a solution, so I ask for a bit of help.
In our Active Directory there are many OUs where users are kept. There is no one top OU where you can start your search. I don't really know why it was set up this way and I don't have an option to change that. I would really like to have ou=users like most have!
So when I try to authenticate a user (I'm installing DSpace in my uni) I cannot automatically add the OU for the user trying to log in and the users themselves don't know their OU (well, why would they!).
I'm hoping there is some simple solution to this. Maybe JNDI API allows for searching in many OUs at the same time (some fixed list in the code)? Or maybe the OU is not needed at all in the search?
Any help/hints would be appreciated.
best regards, LogiFor searching, you can issue a subtree search will search through the entire subtree, irrespective of how many levels of OU's may exist, by using SearchControls.SUBTREE_SCOPE
Have a look at the tutorial at http://java.sun.com/products/jndi/tutorial/basics/directory/scope.html
For authentication, you can either get the user to enter their:
distinguished name
(cn=Albert Eirnstein, ou=Research,dc=Antipodes,dc=com), although that is not entirely user friendly
their NT style logon name (samAccountName)
ANTIPODES\alberte, more user friendly,
or their Windows 200 style logon name (userPrincipalName),
[email protected], equally as user friendly.
You may also want to look at some of the following posts:
JNDI, Active Directory and Authentication (Part 1) (Kerberos)
http://forum.java.sun.com/thread.jspa?threadID=579829&tstart=300
JNDI, Active Directory & Authentication (part 2) (SSL)
http://forum.java.sun.com/thread.jspa?threadID=581425&tstart=50
JNDI, Active Directory & Authentication (part 3) (Digest-MD5)
http://forum.java.sun.com/thread.jspa?threadID=581868&tstart=150
JNDI, Active Directory & Authentication (part 4) (SASL EXTERNAL)
http://forum.java.sun.com/thread.jspa?threadID=641047&tstart=0
JNDI, Active Directory and Authentication (part 5, LDAP Fastbinds)
http://forum.java.sun.com/thread.jspa?threadID=726601&tstart=0
JNDI, Active Directory, Referrals and Global Catalog
http://forum.java.sun.com/thread.jspa?threadID=603815&tstart=15 -
Use of activity types and cost splitting
Hi All,
We would like to track activities for cost centers, but don't necessarily have the need for a sending cost center/object. I understand in a traditional manufacturing set-up, you have sending and receiving cost objects that incorporate the use of activities. Our business is a service that we provide, not a tangible product that we produce.
Here is the scenario. We have activities that a cost center performs. Cost center 1 will perform 2 types of "pick-up" activities, so this would require two activity types. Throughout the course of the month, the activity quantities would get posted to the cost center. So my first question is how can you post only quantities to a cost center--what is the t-code? We're not concerned with incorporating an activity price, we just want quantities.
Second, as primary costs get posted to the cost center in FI, we want to split the costs onto the activities. I have researched t-code KSS2 and can't seem to split the primary costs based on the activity quantities. It keeps refering to target costs, which I don't really want to have to worry about.
What we're trying to do is a makeshift ABC scenario. Since the use of true abc seems almost non-existent, there's not much info out there on it. Does anybody have any good docs on abc in SAP?
Thanks
Kory SquireHi,
1. I understood your case in this way .
Cost Center A performs 2 activities . The cost center collects cost by Fi posting through out the month.
Now you want the activity type should nt have price , only it should have quantities.
And now you want to allocate the cost of the cost center to other object by activity types.
If i am right..
then instead of activity types why not create SKF(statistical key figures) . At the month end by t.code Kb31n post the activity qts. for combination of cost center and SKFs.
Then as per your requirement run allocation cycle.
The kind of you are planning , in that case activity types to be converted as cost object ( it can be done in control area setting) and then you want to allocate.. seems to be little complicated..
Hope i understood and in turn i conveyed the message properly..
Assign points if found helpful
Regards
Prabhat -
Exchange rate difference posting deactivate in MIRO
Hi
Exchange rate difference posting is active, I do not want
to post to this account, How to deactivate this.
Shoudl i change in the config under invoice verification - How to treat exchange rate diff ? will it create any other problem ?
Pl Suggest.
RRS.Dear RRS,
Please note following things
To enter invoice in foreign currency following settings must be done in SAP system.
1. You must have defined the currency you are using to enter the invoice
2) You must configure an exchange rate of foreign currency & local currency in customization
3) You can define diffrent rate for diffrent time period
For a PO in foreign currency you can decide whether the rate from the PO to convert the foreign currency to the local currency at GR or IV.
If you fix exchage rate in PO then you can change it at GR or IV.
If the exchange rate is not fixed the system uses the current exchange rate at GR.In IV the system also suggest the current exchange rate as exchange factor but you can change it.
Reward if useful,
Vivek Maitra -
How to avoid actual cost error log while confirm production order activity
Hi
I dont want to post actual activity cost via production order activity confirmation. But i want standard value keys for my production duration purpose. So,i defined activites(strd value key) in work center without assigning cost center to that work center. While i confirm in CO11N, system throws erro log as Actual cost calculation contain errors and allows me to confirm the activities. I am doing MB31 and all CO settlement activities also. But when i try to close the order it says error log exists,so closing of order is not possible. How to overcome this problem as i dont want to capture any cost of activites via production order,but i want confirmation only for production analysis.Hi
Issue is resolved thru PP forum. Thanks for ur reply.
Solution lies in Control key of routing and BOM costing relevancy.
Maybe you are looking for
-
Passing a file from one page to another
Hello, I have a page in the application, which uploads a file. I need to pass this file to another page, where it's going to be inserted in the table with some other parameters. Is there a way to do it in Apex? for example a temporally table that cou
-
Indesign CS3: How to get the current document name?
Hallo! How do I get the name of the current document loaded in Indesign? Thanks, Alois Blaimer
-
I have created a BAPI now i want to read the data from bapi..how can i do it..I have created bapi for flight data with predefined sflight db table..now i want to read the data from it pls throw some light how can i read the data in bapi.. thanks and
-
Hi, Using BPC NW 7.02 I'm want to create a link between 2 dimensions (Entity and Projects). What I need is a link, that tells BPC to show me (in a report) only the projects related to the Entity I select. Does anyone know how to build that into BPC N
-
hi all, whats the function module used to calculate the difference between two dates regards Suprith